WindowsUpdate_80240FFF or WindowsUpdate_dt000 error message.

Similar Questions

• VS 2005 SP1 fails with "WindowsUpdate_0000066A" "WindowsUpdate_dt000" error message

  Recently installed the version of SQL Management Studio 2005 Advanced Express Services (who have already installed the baseic version) on Win 7 x 64. In the next update of Win gave me Visual Studio 2005 SP1 to the version of Business intelligence that settle. This update will fail with the "WindowsUpdate_0000066A" "WindowsUpdate_dt000" error message. I looked at different posts that mention it previously installed, MSXML 6 is not being installed etc, but not yet found a solution.

  Suggestions welcome! Ian Haynes

  Ian,
  You may want to reset the Windows Update components and try the update again.  Also if you have not yet done, download the update and save it on your dektop and then run it from there.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• WindowsUpdate_0000057E"" WindowsUpdate_dt000 error message when you try to load a PowerPoint security update»

  I get the update of Windows asking to download.  I try and download and every time get an error message '57th in the code.  How can I do this properly installed without error message?

  See you soon!

  Hello

  1. try the steps by the solar eclipse on April 23, 2009 at 15:41 from the link below and check if it helps.

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/691a9c92-624e-4BB9-847a-fe9fc6a51394

  2. If this does not help, try to reset the windows components and check.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• WindowsUpdate_00000646""WindowsUpdate_dt000"Error Message

  I get this message when you try to install the updates. An update always fails... what to do?

  Kind regards

  kcasler

  The current solution for 646 is manually download and install the updates-
  Search for a download
  http://www.Microsoft.com/downloads/search.aspx?displaylang=en TaurArian [MVP] 2005-2010 - Update Services

• I hv with updated installation problem and receive error message-_ "WindowsUpdate_00000646" "WindowsUpdate_dt000" __last 3 days, I get the same error __need help... _

  Error message

  "WindowsUpdate_00000646" "WindowsUpdate_dt000"

  Help me

  Once again thank you

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I continue to be ask to install an update: when I do I get this error message every time... WindowsUpdate_00000646""WindowsUpdate_dt000", I use windows vista

  I continue to be ask to install an update: when I do I get this error message every time... WindowsUpdate_00000646""WindowsUpdate_dt000"

  I use windows Vista

  Hi Phdshrink,

  Who is the update that you are trying to install and you get the error?

  You can download the update in the given below link and install the same in administrator mode and check what is happening.

  http://catalog.update.Microsoft.com/v7/site/install.aspx

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message: "WindowsUpdate_80070005" "WindowsUpdate_dt000"

  In Windows update, I see an important update to install; Microsoft.NET 1.1 Service Pack 1 update. I tried to install and received an error message: "WindowsUpdate_80070005" "WindowsUpdate_dt000" I think obviously I need the update, can anyone help me for a successful installation?

  Never mind

  I had automatically received the update earlier without relizing it.

  Problem solved

  Never mind

  I had automatically received the update earlier without relizing it.

  Problem solved

  Responded. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have an error message after an update, WindowsUpdate_0000737D""WindowsUpdate_dt000, can someone please help, my computer installs updates whenever I stop. "

  I have an error message after an update, WindowsUpdate_0000737D""WindowsUpdate_dt000, can someone please help, my computer installs updates whenever I stop. "

  @cinziac (who has not declared his complete version of Windows):

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Computer will refresh not error message displayed is "WindowsUpdate_80240016" "WindowsUpdate_dt000"

  Computer will refresh not error message displayed is "WindowsUpdate_80240016" "WindowsUpdate_dt000"

  Hi valeriecarterZA,

  ·         Updates failed to install?

  ·         You receive error messages in the history of the update to update failed?

  ·         Have you made changes on the computer before this problem?

  Search for the error message for the updates that have failed to be updated. Follow the steps:

  Click Start > all programs > windows update > view update history

  I suggest you follow the steps in the article.

  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.

  http://support.Microsoft.com/kb/957307

  For reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• error message on the "WindowsUpdate_800706BF" "WindowsUpdate_dt000" use Windows Vista 32-bit home computer

  does not load update message appears when you attempt to update

  Hi Roxannedan,

  (1) since when are you facing this problem?

  (2) what is the complete error message you receive?

  (3) is limited to any Windows specific update?

  I suggest you try the following steps:

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2: Run the fixit available in the link below to reset windows update components.

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

   

  Step 3: Clean boot the computer and then try to install the updates

  Follow in the link below.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to follow normal start-up step 7 in the link.

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have an error message

  "I have an error message on the works 9 update security 00000646" windows Update ""Windows Update dt000.

  Stacey,

  iI can display only what others have tried and had some success with

  http://support.Microsoft.com/kb/2258121

  see if this sugesstion can help you to:

  Solve problems with the installation of the updates that apply to the error code: WindowsUpdate_dt000

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Let us know if this helped.

• error message when updates

  I'm trying to install updates, and they have not... error message WindowsUpdate_00000646""WindowsUpdate_dt000"came to me... anyone have any suggestions?  What is - this and how to fix it?  Thank you

  You see this on MSE? It is a common mistake for the Office not being updates not able to install if Microsoft Updates.
  If they are updated Office, you are off-topic in this forum.

  To help solve your problem, try to install updates by downloading via: http://download.microsoft.com
  Look for the update fails, then download and install as a standalone program. Red / http://aiscer.spaces.live.com/ MVP spectrum [2010] ~ consumer security

• Receive error message when you try to download the update update for PowerPoint 2003 (KB957784) security

  I still receive an error message when you try to download the update to update security for Microsoft PowerPoint (KB957784).

  I searched night and day for a solution - even contacted microsoft by e-mail.  The specific error is: Code 57F

  It is displayed when I press the "get help with this error message:
  "WindowsUpdate_0000057E" "WindowsUpdate_dt000"

  It was the E-mail feedback:

  Thank you for your email about problems with the download of update of security for Microsoft PowerPoint.

  I understand your concern. Due to the nature of the technical issue, it was not possible for me to respond to your request. There are number of ways you can get technical information to our support team.

  MowGreen-
  Understood the factor of masking - has considered it.  Still, I send my appreciation in this matter.  I would like to know if you think I should download the SP2 for Vista.

  Peace-
  Matt

  Service Pack 2 offered by Windows (automatic) update yet?

  Windows Vista and Windows Server 2008 service Pack is not available for installation from Windows Update and automatic updates does not offer

  Cause
  This problem can occur for different reasons. However, the following reasons are the most common:

  • Already, you have the service pack installed and do not realize it.
  • You must install another update before you install the service pack.
  • You have not installed Service Pack 1 (SP1) and so you are not offered the option to install the Service Pack 2 (SP2). SP2 requires that you have installed SP1.
  • Components of the system that you must have to install the service pack are not installed on your computer.
  • You have a piece of hardware or software on your computer that is listed in the section "hardware and software which if present will result in Windows Update and automatic updates offers is not a service pack " article.
  • You have installed a preliminary version of a service pack, and it was not properly uninstalled before that you tried to install the final version of the service pack

  Service Pack 2 for Windows Vista and Windows Server 2008 is not available to users for which the following update is hidden:

  955430 description of the Windows Vista and Windows Server 2008 installation feature software update released April 28, 2009

  See article KB, Matt. When the system is ready for SP2 [as in you will be informed of the automatic update], suggest then you download the full SP2 package, save, temporarily disable AVG and then install SP2.
  The MS KB article below has sound advice for steps, you have to take before installing a Service Pack

  What you need to know before you install Service Pack 1

  Microsoft offers support without charge to get SP2 installed or for the resolution of problems that arise after he installation

  Start here - free support for Windows Vista service pack problems

  If a problem occurs, you can also solve problems installing yourself-
  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  MowGreen MVP Data Center Management - update of safety Consumer Services

• WindowsUpdate_80071A91""WindowsUpdate_dt000 error. "

  I can't update my windows 7 and I get this error message. WindowsUpdate_80071A91""WindowsUpdate_dt000"

  Hi gsiant,

  Follow the instructions in the below that may help you resolve the issue.

  1. Click Start, type cmd in the search box, and then click cmd in the list programs.
  2. click on run as administrator and then click on continue.
  If you are prompted for an administrator password or for confirmation, type the password, or click on allow.
  3. at a command prompt, type the following command and press ENTER:
  fsutil resource setautoreset true c:\
  Note these steps assume that Windows is installed in the default location, drive C. If this is not the case, adjust the drive letter of the path of the folder to match your configuration.
  4 restart the computer.

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Win7 to win 10 upgrade error message

  I constantly receive the following message when you try to upgrade to Win10 Win7.  The last error message is

  1 Windows Update, error 8024200d

  "WindowsUpdate_8009000B" "WindowsUpdate_dt000"

  1. navigate until "C:\Windows\SoftwareDistribution\Download" and delete the contents of the folder.
  2. press on the Windows key + X > click (Admin) command prompt and then type "wuauclt.exe /updatenow.

  Press enter

  3. open Control Panel > Windows Update and Windows 10 should begin to download...

  Also check:

  • Windows 10 install and upgrade of Solutions top of page

  Please be aware, even if you do not get the Windows 10 app, you can always download Windows 10 as one. ISO file, create a bootable copy and update your system.

  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  See the instructions: How to download official Windows 10 ISO files

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must
  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times and try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Do a clean boot, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
  • If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).