Wireless 365 Bluetooth module Dell on Windows 8 pro

Similar Questions

• My wireless 365 Bluetooth Module is not recognized by my computer... How can I be recognized

  I have a dell laptop windows 7-32 bit... the problem is that I have wireless 365 Bluetooth Module, but it is not recognized by my laptop... what should I do?

  Hello

  What is the brand and model of the Wireless 365 Bluetooth?

  Given that the other computer is too not to recognize the device, it is best to contact the manufacturer for a better support on this issue.

  It may be useful

• Dell Wireless 365 Bluetooth Module - driver install

  This afternoon, I connected a Belkin F8TO16 bluetooth adapter and paired with a pair of headphones 7dayshop. Rather than leave well alone with an older driver, I decided to update the Belkin driver - which went well. However, the 365 Dell, reported that an error and Troubleshooting Module informed me that she was now a driver error. Windows searched and found a driver, but could not install it... Since I downloaded and installed the drivers of new Dell for her, but I always get the same result - unable to install driver. (The module worked fine until I updated the Belkin driver.)

  I tell me I need to uninstall the Module and then install an updated version. Is this the right way to go, and if this is the case, how can I go about it?  I use Win7 64 bit on an Inspiron 1750.

  Hello

  Windows 7 has decided to get in on the Act while I was eating lunch and guess what? All works well, the headphones are now displayed permanently in "Devices and printers" and the cats play with the Belkin adapter on the floor!

  Thanks for you input - following your suggestions I learned a lot about my computer and bluetooth and then suddenly "the problem fixed itself" Windows has taken some time to locate and download drivers - but so good! Thank you very much!

  Now trying to find out what's on listening my new Android Tablet - I bought for educational purposes, so I can't complain if I now have to learn how it works!

  Best regards

  Carl

• Driver HP Bluetooth Module compatible with Windows 2012 r2 for HP Touchsmart 610-1050y computer.

  Need compatible HP Bluetooth Module Driver with Windows 2012 r2 running on a HP Touchsmart 610-1050y computer.

  My HARD drive crashed a week go, bought a new and so far everything is good except for the wireless. I take classes of r2 Microsoft 2012 410, 411, 412, that's why I loaded 2012 r2 on this machine, but I can't find a driver that would allow the HP Bluetooth Module using r2 Windows Server 2012 &. HP looking for this driver, but not available, also found other sites that claim to have the drivers I need like a driveragent.com, but I pay 30 dollars for their services. Any help or suggestions are greatly appreciated and welcome.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Toshiba Stack BT Wireless 360 Bluetooth Module - remote installation

  Hi all

  I try to install the battery Bluetooth Toshiba Wireless 360 Bluetooth Module via RIS image.
  Server operating system = 2K 3, portable OS XPSP2 =
  I tried to save an answer file: it will not!
  I tried to wwrite one - he will not use it!

  Someone out there must be and able to deploy this software with RIS.

  What is the answer? Please?

  Girltekki

  Hi Girltekki,

  you need a file to answer for when you do an install LAUGH? RIS deploys a software image with all already installed software.
  If you do not all of your software in the picture already but spread your software separately then has nothing to do with an RIS installation. So please do not confuse the community ;)

  See you soon,.

  Barry.

  PS:
  If you want to figure out how to do an automated/silent installation of your BT stack:
  When you run the executable to install BT a new, rather cryptic folder will appear in C:\. This is the BT installation files extracted. These files include a "silent_install.bat" and a "AS.silent.ini" which is rather cryptic. Unfortunately, there is no additional documentation.
  Good luck!

• Impossible to install the wireless network adapter TP-Link on Windows XP Pro error "insufficient system resources exist to complete the requested service"

  Hello

  OT: I can not install my wireless adapter TP-Link on PC under Windows XP Pro. I continue to receive messages from "insufficient system resources exist to complete the requested service" after each reinstallation
  I had this problem since I moved into my new house two weeks ago. To my old place, my pc is connected to my router via a network cable, so everything was fine and dandy. However, to my new place, with a network cable is just not possible, so I use a usb wireless adapter to connect. I bought a TP-Link Wireless N USB Adapter (model TL-WN727N) and I can not installed.  First, I installed the software using the CD-ROM of resources which is come with the product then connected the adapter wireless on my usb port at the back of the pc. It detects the device very well, but when he wants to install the driver of this message displays "an error occurred during the installation of the device. Insufficient system resources exist to complete the requested service". When I opened my device manager, a yellow exclamation mark under Network - 802.11 n WLAN cards there. In this window, I tried:!. the driver update (latest driver same downloaded of the site Web of TP-Link) 2. Disable the device (nothing happens) and 3. Uninstall (which I just can't because another message "failed to uninstall the device. The device may be required to start the computer"is displayed). All three failed to install my wireless card. I am out of resources here, so any help is greatly appreciated.
  My PC specs:
  AMD Athlon (TM) II X 2 245
  2.95 GHz, 3.25 GB of RAM
  Windows XP Professional version 2002
  Service Pack3
  Thanks in advance.
  concerning
  gas

  T-Link support tried it yet?  http://www.TP-link.com/en/support/contact/

• I just bought a refurbished dell w / Windows xp pro. How can I activate

  I just bought a refurbished dell laptop w / Windows xp pro.  How to activate the window or register?

  Thank you

  Noramally I expect activation to be Internet standard-however, you may need to activate by phone...

  If you encounter problems, correctly thenTo analyze and solve problems with the Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -IN YOUR OWN THREAD, please

• Help! -New Dell i3847 - Windows 7 Pro - Dell Recovery Disk Win 8.1 & DBaR don't make a backup of the system

  I bought a new Dell i3847 and it has Windows 7 Pro 64 bit installed at the factory on it.

  I wanted to make a complete backup of the system, but the Dell Backup and Recovery software does not allow me to make a backup of the system.  In addition, I was unable to create a system recovery disk using Dell backup and restore.

  I can't use the drive system recovery expected Dell because it clearly states Windows 8.1

  (1) why is a Win 8.1 drive included with a Win 7 Pro 64 bit system?

  (2) what is the problem with Dell backup and recovery that she:

  (a) cannot create a recovery disc factory

  (b) allow me to create a backup system so I can go back to the factory State

  Help!

  It has been 2.5 hours and it is still "initialize disk" to create a recovery of the plant.  It usually somewhere fails during initialization or in writing.    Spend hours for each failed attempt to create a factory recovery disc is NOT GOOD!

  The factory restore disk was finally created.

  Dell is now a person pays create a backup system and the user must download a update to do so.

  Microsoft has a tool to create a system image and make a recovery / restore disc which is free.

  So, I used DBaR do restore disk by the factory.

  However, to make a system image and a recovery / restore for that, I used windows 7 built in software.

• Driver Bluetooth for DELL E5500 windows 7

  Hello

  I'm looking for driver for DELL E5500 Bluetooth in windows 7. Can someone help me?
  Thank you!

  lukatim,

  Click on the link below to download your drivers without wireless/Bluetooth

  Latitude E5500 drivers

• wireless driver for easynote ML65 for windows xp pro

  Hi, I was wondering if anyone could tell me where to download a wireless driver for my GM Kamet Packard Bell easynote ML65 using windows xp pro3 please? I looked but know nothing on which we will work on my computer, thanks in advance if you can help me.

  Hi Sean,.

  In this case, since there are no drivers available on the manufacturer's support site, I suggest that contact you Packard Bell for more information.

  Packard Bell - Customer Service

• D Link DWA 140 Wireless Stick does not work with Windows 7 Pro x 64

  After searching the Internet for most of the day, I am naïve. Installed Win 7 Pro x 64 (from MSDN-AA) today and I wanted to use my job well DWA 140 to connect to my router for internet. The Board in use is the Asus P5p77-M. All, who tried with 2 different USB stick work USB ports in question. Windows is up to date, as it's the Bios and Chipset drivers, on the site of Asus's latest versions are installed. The DWA-140 appears up like works well in my device manager, but what is it. When you install the software from the site Web of D-Link, the connection software shows no WiFi at all, and the same thing happens if I chose to install the drivers Ralink (manufacturer of the chip inside the DWA-140). All the ideas here what to do?

  Carsten

  What happened when you tried the Windows software?

  He was able to detect the card?

  Looks like a program prevents the identification of the card.

  I would like to start with a clean boot to make sure that a startup program is not causing the problem:

  http://support.Microsoft.com/kb/929135

  If this does not work, I stay in the State of clean boot and disable anti-virus and firewall temporarily and reinstall the software of connection:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP revolution 810 - ctrl-alt-del in Windows 7 Pro tablet mode

  Is there anyway to unlock option ctrl-alt-delete when in tablet mode?  I tried in many shots, taps, using the windows key (holding down/etc.), the switch with the windows key and nothing will allow me to get to the login screen, with the exception of the actual keyboard switching and pressing ctrl-alt-delete.

  Your question would be better served in the forum of the business community business.

  You could look here and immediately find an answer to your question.

  Best regards
  ERICO

• Using a Dell under Windows XP Pro laptop, typing in THE results of the application in order to reposition the cursor randomly, resulting in having to re-type approximately 25 percent of all copies.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  It happens in one

  Hello T Walker

  Have you tried a different mouse, or cleaning your mouse?

  Should the mouse batteries?

  You have a pointing device? You can go into Control Panel and turn it off.

  Go to control panel / mouse, select the tab "Stick" and uncheck the box marked "Tapping."

  If this is not enough, just turn it back on.

  In Control Panel, select mouse then the pointer Options tab.

  Uncheck "enhance pointer precision.

  .

• How to get new disk Dell OEM Windows XP Professional?

  I'm at my wits end! I received as a gift from a friend of mine, a laptop Dell Latitude Windows XP Pro. I Loooooved apparently crushed this laptop until the hard drive!

  I am installing a new hard drive, but I need the OEM disk to install windows!
  Help! How can I do this?

  I don't understand why they make life so difficult.

  Call Dell and order one.
  MS - MVP - Elephant Boy computers - don't panic!

• Windows XP Pro SP3, OEM in Dell D600 "not responding" on every article, every time, all the windows

  My DELL D600 has OEM Windows XP Pro SP3, and netframeworks all or almost suddenly started not ANSWER DO NOT each time. I don't know what went wrong, it's driving me crazy. I can't afford to upgrade.

  I tried the fixit from Microsoft online, no luck.

  I uninstalled a few programs, perhaps thinking it's too full. Still no luck.

  Whenever I use any folder window, or any element of the queue at all, the same thing happens, every time. "Not responding" delays on the window or the desktop contains the item. Must hit Ctl + Alt + Delete at least twice, if not 3 - 4 times.  Each 'entry' lasts for a number of at least 26 and often much longer.  Basically, Windows is not very functional.

  I have two OEM for Dell, not sure that I put here (I was wondering if I should repair-installation Windows), but worried to destroy my Office Server installations that have 3 WordPress developments.  I can't afford to destroy the.

  Any ideas to FIX this would be greatly appreciated.

  Thank you.

  Good, minor success.

  The returned quickly file number, but a re - check with Roguefix showed, it was not clear, no change in System.

  I therefore decided to start uninstalling things, hoping to uninstall accidentally the culprit.

  First I stripped all the netframeworks and the SPs.  Has failed, file number remained.

  I then started to uninstall programs. After uninstalling programs a half-dozen, suddenly THE FILES ARE WORKING AGAIN!  Don't ask me why.

  Then, I rebuilt my netframeworks and SPs.

  Then, I clicked to access Microsoft Updater to get up to speed.

  IT WILL NOT BE UPDATED.  Failed! is what I get.  It says the software needed TO be updated is not in my HD and offer a download. When I try to download and install failed!  It will be not even installed that.

  This goes back to the same "cause" - for reasons unknown the last 4-6 weeks, installing any updates in my DELL D600 Windows XP Pro OEM.  Initially, they install.  Then begins the phase were some updates installed, others down without reason.

  Then, no updates would be installed.  That was BEFORE I plucked executives trying to solve the issue of records.

  It is not even asking me to install the real test happened before, I think that.  I think it was in August 2013 or almost.

  I'm desperate to get the updates, if you have an idea on how to help me.

  Thank you.