Wireless and network of comments and HREAP

Similar Questions

• Extend a network of comments with AEBS and TC set up a connection

  Hi all-

  I was wondering if anyone has had any success with that extends a network invited on two airports or more that are wired together.  I use currently a Time Capsule as my main router (802.11ac), and have it configured with DHCP and NAT like fashion.  It connects via a connection wired to an Airport Extreme Base Station (802.11ac), which is set in Bridge mode and configured with a static IP address to the primary time Capsule.  The time Capsule is configured with a network of comments that is fully functional, and the AEBS extends the primary network using the same SSID and encryption on 2.4 and 5 GHz.  However, when I turn on the AEBS remote networking reviews, I can connect to the AEBS, but cannot obtain an IP address (the computer displays an automatic address assigned).  The SSID and the encryption is the same for both networks of comments.  I tried to use "extend a wireless network" on the AEBS and that will extend the network, but it is extremely slow due to the wireless connection it creates between two access points (I have the TC and wired together AEBS to offer increased coverage, because my house is not very "friendly wifi").

  I would greatly appreciate any help or insight anyone can provide, even if it's to tell me that a cable extension of the network of comments is not possible.

  Thank you

  Mike

  Wired to the guest network feature extension is indeed possible and should be implemented and enabled automatically if you are using "Assistant" Installation from Apple to expand the networks main and guests.

  I had this set up on the 2 airports and sometimes 3 for a few years and not a single hiccup.

  Suggest that you reset the AEBS back to default settings and then use configuration Apple "Wizard" to set up the AEBS again. It automatically adapts the AEBS to expand networks main and guests.  Everything you really need to do is enter a name of device to the AEBS, the wizard takes care of everything else for you.  It is one of the simplest game ups ever.

  Once you have the updated AEBS up and running, you can assign a static unit IP address if you want to, but it should not be necessary.

  After the back if you need some advice on the use of the Apple Setup Assistant to do the work for you.

• Problem with wireless - Vista Network and Sharing Center does not recognize my connection!

  I use the Home Visa software and my network and sharing Center does not recognize my connection but I can access the internet without any problem. Previously, I was using a wireless router Linksys with an old box of AT & T internet with no problems. The problems started after I updated my AT & T internet box that made obsolete the linksys router and now the network share does not connect. I just have the problem of getting the network and sharing device recognizing that I am actually connected to a wireless network. I can't use my printer or share files with other people. I can't get my wireless printer to work if I restart my computer and I have the documents I want printed already sent to the printer. My network and sharing Center also works very well for a few seconds when I start my computer then it turns off again.

  Hello

  Method 1:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  You can also view the related items for more information.
  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Method 3:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  See also:

  Connect to a network with Windows Vista wireless

  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx

• Reference Dell wireless wlan network contoller care stopped working and was closed

  When I sign on my computer a pop box message titled: "dell wireless wlan network contoller care stopped working and was closed" and said "a problem caused the application to stop working correctly. Windows will notify you if a solution is available. "whenever I close the dialog box, it reappears in 10 seconds, say the same thing. i've tried looking for updates and correct the problem, but so far nothing is working even my wireless (of course). I don't remember the updates or installations on the eve of what is going on has begun. I had a few downloads, but those who were on a week or two ago and I have had similar to those downloads of before and it did not.  they the day before I started getting this message didn't notice or do something out of the ordinary on my computer. Help! Please and thank you.
  Oh and I get another message when I first turn on your computer but unlike the other reappear... and says something about an error with C:/Windows/System32/onex.dll and asked me to open it, but windows can not open it and I do not know what program to open it with and by using the internet option no longer works.

  Hello

  You did changes to the computer before the show?

  Method 1: I suggest you put the computer to boot and check which application is causing the problem:

  http://support.Microsoft.com/kb/929135

  Note: follow step 7 to set the computer to a normal startup.

  Method 2: I would say as update you the WLAN driver and check if that helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: Run the hardware and devices Troubleshooter and check if it solves the problem:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

• WIRELESS and wired LAN do not know each other

  My internet provider installed a new cable modem, without capacity WIFI because I have an airport extreme base WIFI (with cable Express extensions).  Speed and quality are OK, wireless and wired, but there seems to be a wall of China between WIFI and wired (LAN): devices that are connected via a cable to my LAN are not visible from the wireless network and vice versa.  Airport extreme is not 'Bridge' mode ("because not of wireless on the new modem capability".)

  No idea of the reasons for this?  Thank you very much

  Sounds like the configuration of the device. With the airport devices it can operate as a device on the network or another firewall as its own network. I think that it is way jumpered to activate, this will allow you to configure the wireless on the airport, but your current router will do the DNS/DHCP and will be a single network.

  Now that you have configured as two routers on an independent network as there is no bridge.

• I have a HP Pavilion A6700Y. Currently, access to internet by modem. Want to go wireless and use

  I have a HP Pavilion A6700Y.  Currently, access to internet by modem.  Want to use the Wi - Fi and wireless.  Any ideas on how to do it with this computer.  If so, what would take?

  cmm0822bam wrote:
  

  I have a HP Pavilion A6700Y.  Currently, access to internet by modem.  Want to use the Wi - Fi and wireless.  Any ideas on how to do it with this computer.  If so, what would take?

  What type of modem do you have?

  Do you hear an old style phone modem or a cable modem?

  If you have a cable modem and it is not wireless, then you'll need to buy a modem wireless also has four LAN ports. Connect the WAN port on the router to the modem that provides your internet connection and then configure the SSID of the router and the wireless PC network card.  The easiest to install and configure is brands like Linksys and Netgear. Your PC with a built-in B/G wireless network adapter. Purchase of a high-tech Wireless-N Dual band Router router would be too much serious.

  Best regards

  ERICO

• DV6409ca No. Wireless and three device Base system in the Device Manager

  I have a DV6409ca SNcnf73202t7 and ran Windows XP on it flawlessly for about a year.

  Last night I asked my laptop and this morning I woke up to the orange light of death on the front of the computer for the wireless and three newspapers of device Base system in the Device Manager. They run:

  Bus PCI 7, device 5, function 3

  Bus PCI 7, device 5, function 2

  Bus PCI 7, device 5, function 4

  I tried making restoration of the system, the removal of the chipset drivers / wireless/network and reinstall in safe mode and the search for solutions to many other people tried to make their wireless work.

  Any help would be appreciated. Thank you

  Hello:

  You must download and install the Ricoh 5-in-1 card reader driver support for your laptop and driver page.

  Go to Device Manager and expand network adapters.

  Is the model of your wireless poster card he or she has completely disappeared from the Device Manager, does not come under the section of the network cards, or in the General list of devices such as a network controller?

  If she disappeared from the view, 99% chance the connection from the motherboard to the card slot plugs into is fried.

  This is a very common problem with the dv6000/dv9000 models.

• HP Photosmart D110 - wireless and wired to installation - at the same time

  PLEASE READ CAREFULLY THAT NO MATTER HOW MUCH DETAIL I SAY QUESTIONS. IF ALL OF THE OTHER INFO. IS NEDDED IT PLEASE LET ME KNOW.

  Hello community I am undergoing, step by step, how can I set up my printer to a network via Wired and therefore any other device connected to that network can print from it.

  I used to have my printer connected via connected to my main PC, but it soon came the need to print from other places in my house and I remembered that my printer has this great ability, so I wanted to know how, step by step. I tried to put in place by myself, but I couldn't, I myself helped with the HP Solutions and Guides, and somehow, I missed something.

  Details:

  OS main PC: Windows XP 32-bit (it has the latest updates)
  Printer: HP Photosmart D110 one
  Router: Time Capsule from Apple

  I uninstalled the printer from my computer, so don't be any errors.

  Here's the deal, I want to connect my printer to my main PC via Wired (cable), once correctly installed, I want to connect this printer on my wireless (Network Time Capsule), so any other device connected to the network can print from it.

  If someone can take the time to tell me how to do, step by step, with links from HP information. etc if necessary.

  I already know how to set up a static for my printer IP address and all the stuff in IT, so don't worry, everything you say me that I understand it, all I need to know is what to do exactly, but the case is when (step by step).

  Thanks in advance.

  Hello, I noticed that you said 'Network via Wired' and then he said "wireless. I will be happy to help you. Just to let you know, you can't be WIRELESS and NETWORK CABLE (Ethernet). You can be wireless and plug the main PC into the USB cable. So, here are the steps to download the drivers and the connection to your PC (USB) PRINCIPAL and others (wireless).

  Connection to MAIN PC wired (USB)
  1. connect the USB cable from the printer directly to the main computer.
  2 download the drivers from the Web site (http://goo.gl/BVOOg), or if you have the CD.

  Note: whenever you download the software and drivers on the site. Be sure to choose the SOFTWARE from FEATURE COMPLETE.
  1. Select software and drivers
  2. type in the name of the product (click Search)
  3. choose the operating system (click Next)
  4. choose Download (scroll to the bottom for the SOFTWARE of FEATURE COMPLETE)
  5. After downloading the software, it will PULL
  6. it will give you an option on how you want that it connected
  7. you choose USB to the PC of the hand

  WIRELESS NETWORK connection
  1. go into your printer settings
  2. Choose Network
  3. Select wireless CONFIGURATION WIZARD
  4. it will search your router (if wireless). Choose your router and configure the printer wireless upward.
  5. go to other computers and follow the steps above to download the drivers.
  6. when it comes to SELECT connection, choose (without wireless/network)

  In this way, you can print from your main PC via USB (wired) and the other wireless computers.

  If your ROUTER is not wireless, and you can only use a wired (Ethernet) network, then you can print only by plugging the cable ETHERNET router to any PC of your choice print from the moment. Also to plug another cable from the router to the printer.

  I hope this helps, if you need more help please ask, thank you.

• I'm trying to get my laptop to go wireless and when they ask me the key code to my internet source, that it keeps an incompatibility

  I'm trying to get my laptop to go wireless and when they ask me the key to my internet source code it keeps incompatibility is my question were can I find the key code

  Hello

  The password is set in your router. Check with the router manufacturer as most have excellent
  online help to set a password as well as connection to the router. Also check in
  their forums (if any).

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Pro Plus 6800: error 0 x, 00000057 wireless and wireless Direct properties of the Windows Control Panel printer - print a Test Page

  I have a laptop Toshiba Satellite of Win7 64 bit and a HP 8600 Pro Plus,
  update firmware and drivers about 2 weeks for the 8600 was a
  a long time I have been updated, which is connected wireless has decided to
  Direct to print Wireless Setup once the program installation, I tried to do a windows
  Print the Test Page in the printer property Panel, somewhat normal for
  set up a printer

  Under the connection of the conciergerie, I got the error message 0 x 00000057
  Under wireless direct printing, I got the same error 0 x 00000057

  After spending the time to check the settings, connections and asking
  Why? I decided to see that if I could print the docs, I print a PDF file,
  Notepad and Word documents in each application under the two
  configurations without problem.

  Under the wireless connection, I started the Web Services module
  and was able to make the impression within the Web Services Test page
  module without problem could not yet do the printing Test Page
  in the printer properties panel.

  I ran Print and Scan doctor who, to my surprise mentioned
  a conflict of Driver, I welcomed this program to uninstall the driver,
  went looking upward for the driver and the same driver was so done
  No download but to remove the driver and reinstalled the driver.
  Always error message here.

  I'm now tempted to delete a direct print wireless and see
  What happens if the error disappears, if she does not unstall all
  associated with the printer and do a clean reinstall. In case of emergency
  is there an alternative to the use of the Web Service module to the setting
  When not connected to the wireless network?

  I think that the Panel of the printer would do this (I'll watch this later

  spend enough time on it), or do I need to run Web Services to

  direct wireless installation, just think about this, otherwise I'll shoot

  a usb cable.  Maybe if I install Direct wireless on the printer control panel

  the message will disappear as the installation of the printer program, not software

  on the laptop?

  It is a minor problem since I can still print but question why!

  See other issues about this error message I thought

  spend my experience with this error.

  Always had a number of things to think and try, once again.

  If your getting this error message I would suggest trying a test page printed

  within the module of Web Service to see if the message developed.

  Could not back the driver so I removed the printer driver

  by deleting.

  19/07/2011 Date print driver
  Print driver version 26.0.0.0

  and removed software in Add and Remove software Hp also had to turn

  disable the wireless module directly on the printer to reinstall from the CD.

  Reinstalled printer/software form the CD supplied with the printer, the

  Driver date is 08/12/2009 Ver.9.0.0

  No more error in configuration.

  is the answer to the error message 0 x 00000057 or 0x00000xx

  associated with the driver? Or just the 0 x 00000057?

  Could not find a list of drivers between the driver and

  the driver on the CD.

  Will not update the driver for a good while or until I have too.

  The dates on the drivers are only about two years apart, the

  The version numbers are an issue questable.

• Drivers wireless and PCI Simple Communications HP 2000-2d00SM controller

  Hello, I need drivers for Hp 2000-2d00SM laptop for the wireless and PCI of Simple Communications controller.

  Network controller

  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01
  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C
  PCI\VEN_168C & DEV_0036 & CC_028000
  PCI\VEN_168C & DEV_0036 & CC_0280

  Simple PCI communications controller

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1854103C & REV_04
  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1854103C
  PCI\VEN_8086 & DEV_1E3A & CC_078000
  PCI\VEN_8086 & DEV_1E3A & CC_0780

  Tnanks in advance

  Hello:

  You need these drivers if you have installed W7...

  Wireless:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123851-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0009

  Comms Simple PCI:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104495-1&cc=us&DLC=en&LC=en&OS=4063&product=5275370&sw_lang=

  I see that you posted earlier and for anything else you need, you can use all the W7 drivers and the software of the model I posted the driver Intel Management Engine Interface, with the exception of the BIOS and firmware files.

• My internet connection continues to stop Wi - Fi wireless and not!

  I have xp and I was online with wireless and then I lost the connection, and then I went online with the ethernet cable directly to my ' puter, now I lost that connection. I made the diagnosis and follow-up of all the options to "Establish a network connection"-"establishing a wireless connection", etc.. I went into the control panel and tried everything I could think of. Can someone tell me what is the problem? What I am doing wrong? Why did he stop working in the first place? Thank you very much! Chris

  What anti-virus application are you running?

  Antimalware application are you running?

  Both updated?

  If you cannot even get LOCAL wired connectivity - or simply to the Internet?  (If connected to a router, I assume that you are, can manage you the router at least since the wired connection?)

  You can watch:
  http://support.Microsoft.com/kb/299357/
  (Fix manual, since make him use FixIt is probably a bust).

  Also:

  Start button--> RUN--> type:
  netsh winsock reset
  --> Click OK.

• Problems with HP Photosmart C309g wireless and wired

  Hello

  I fought with my C309g since I bought it a few months before.  It works on and outside, but can not hold a consistent network connection.  I have wired it usually but have tried both wireless.  It is plugged directly into my Netgear router.

  Before it works for a short period of time and the other Offline Online & on its own.  Sometimes it recognizes the other computers on the network to print & analyses.  I have 3 PCs on the network - two cables & a wireless.  It will recognize the three rarely, two of them sometimes, one of them sometimes (usually the laptop wireless) and none of these most of the time.

  There each time than in quite awhile for the first month and now it does not appear at all on the network - wired or wireless.  I can't print and more.  The documents simply to sit in Quebec for a while and then produce an error.

  Any help appreciated.  This printer is a wholemeal bread.

  Thank you

  Gringeiro

  Hi Gringeiro,

  You use the wireless WEP or WPA security on your router?  I would recommend WPA2 with AES, well, if you want to connect wireless.  It will also, if you set a static IP address on the printer.  You can do this by typing the IP address of the printer in the address bar of your browser.  Select the network tab, and then look for IPV4 under the section of wired or wireless, depending on how you have connected it.  There should be an option to "suggest manual IP".  If this isn't the case, type IPCONFIG from the command prompt (start/run cmd) to get your addresses in the subnet and the gateway.

• Wireless and wired router, DHCP and "visibility".

  Okay, it's a bit complicated, but I'll explain better than I can.

  I have a wired Linksys RV082 router. It works very well but is not wireless.  I have a Cisco/Linksys E2500 wireless router for my wireless devices to use.  the RV082 is the network of 192.168.1.x. The E2500 is the network of 192.168.0.x.  Cable Internet goes to the RV082 Wired, and a line out from there to the wireless router.  This all works fine except for a few disadvantages.

  I have an iPad that connects wireless and some of the apps offer a http:// option, so I can transfer files to this application.  I also have a network printer connected to wired and wireless devices do not.

  I have 2 problems:

  (1) in order to transfer files from my laptop (that I hung on the cable network most of the time), I disconnect the wire, wireless, then I can transfer files.  Œuvres, but it's embarrassing.

  (2) I want a netbook that I have on the wireless connection to print on my printer wired network.

  It seems that the 2 networks do not see each other.  Here are the things I've tried:

  (1) I disabled DHCP on the wireless router.  My thought is that requests for an IP address to the wireless router has sent will be transmitted along my wired router... NOT.  On my iPad and Wii, they could no longer connect wirelessly. Strangely enough, with the disconnected wire and wireless connection with my laptop, I've still was getting a 192.168.0.x IP address, even if the DHCP service is disabled on the wireless router.

  (2) thinking I would put manually the wireless router on the 192.168.1.x network, instead of saying things to get an Internet connection IP dynamicaly, I manually the IP value is 192.168.1.245.  Serious mistake.  I couldn't connect at all anywhere then.  The only way I could fix it was to hang on to my laptop computer, assign a static IP address to my laptop on the same network as the router, then I was able to get to the configuration page and to put things like he was.

  Another thing... Even when I'm connected only plugged on my laptop and wireless is disabled, I ping 192.168.0.1 (the wireless gateway) and it returns a value. But, when I try to go in a browser, I get a "page not found" error

  So, how can I get these two networks to play well and see each other?

  Thank you

  Jesse

  Put the router E2500 'bridge' mode and it will transmit the RV082.

  Assign E2500 DHCP, an IP address for itself of thje RV082, it will just be for access to the web administration E2500. System powered via the E2500 wired or wireless IP addresses will be obtained from the DHCP server on the RV082, and these will all be on the same subnet as designed to be plugged into the side of the RV082 LAN.

  Should allow you to do exactly what you want to do.

  I have a similar setup here works well with an E4200V2 right now.

• How to set up LAN wireless and wired for simultaneous operation

  I use a Lenovo thinkpad running windows XP. I want to set up an independent network so that I can connect my hardware for debugging. At the same time, I want to be able to access the corporate network using the wireless interface.  My autonomous network consists of a Belkin router that is to act as a DHCP server, my laptop connected to a port on the router and my test material connected to a different port on the router. My wireless interface is configured to connect to the corporate network. With wireless interface and the ethernet interface (wired) enabled, when I am doing a config ip, I see that the devices get valid IP address, corresponding to subnets, they connect to IE the ethernet port gets IP address 192.168.x.x 172.x.x.x IP poster wireless interface while. But I am not able to ping or access sites on the internet, I am able to ping the router Belkin on the independent network.

  However, if I go under network connections and disable the ethernet connection to the local network can access the internet and my business network. Similarly, if I disable the wireless connection and that you enable the ethernet connection, so I am able to ping the router only and not my test equipment connected on the same subnet.

  If I configure the (wired) ethernet network interface to use a static IP address in the pool of IP from the router Belkiin (who is also a DHCP server) and set the IP Address of the Belkin router as gateway, I can access all the other devices on this local subnet if and only if the wireless interface is disabled.

  The search for networks order is defined as the wireless and Ethernet.

  In my case, I need two interfaces to be active at the same time, as explained at the beginning. Appreciate any suggestions.

  Thank you.

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  Hope this information is useful.