Wireless clients cannot 'see' the P1102w printer

Similar Questions

• wireless client cannot see wired - WAG320N

  Hello

  my modem/router WAG320N works fine but the wireless client cannot see wired and vice versa. they are in the same network (192.168.0.), using the same 255.255.255.0 mask, same workgroup firewall and Yes to enable all packages in and out. IP addresses are DHCP form.

  Internet sharing works fine, but when im trying to play any game on LAN wireless clients peuvent see their car but not wired. when im trying to client ping wireless from a wired machine it does not either.

  What is intresting in a DHCP reservation or the ARP table (in router configuration) I can see cable and wireless customers. but still they do not see each other.

  help pls!

  Hi again,

  I went to PC World and they exchanged this WAG320N to another. but this time I went to ASUS RT - N16 and so far all is working correctly. I know its missing adsl modem but got usb 2 and a print server.

  Sorry cisco...

  thx for your help guys!

• Machine of Windows 7 cannot see the new printer

  Again Deskjet 4625 connected to my LT on windows 8. Wireless connection is OK and it works.  Scanning HP doctor ran and he see the printer on a machine from W7 desk top but still won't load the drivers. Printer shows offline, but I can see it on the ASUS router. Light is lit in blue on the printer.

  I tried everything but can't find the problem.

  Hi there RNRMusicMan.

  Followed your advice, but the result was "software installed in vain."

  The Wifi is connected. It works fine on my laptop Win8 where all of the HP software installed OK.

  I also have had to print via Windows 7 via the Wifi but cannot install the W7 HP software and therefore no Scanner.

  I tried turning Norton. I tried a start-up in minimal mode, but without success. I have tried many other options of threads, but without success. Clearly the HP software does not like W7!

• S75-b7218 Windows 8.1 satellite cannot see the bluetooth headset

  Satellite 8.1 Windows cannot see the Philips SHB5500 bluetooth headset.

  Driver: Intel (r) wireless Bluetooth (r)
  2014 08-12
  Version: 17.1.14342

  Help! Please, I beg you!

  Laptop certainly supports BT 4.0
  The question is: have you enabled the BT correctly in 8.1 parameters to win?

  Another question: have you tested the BT headset as part of another device?
  I mean, it is possible that the helmet is not working properly.

• cannot see the bengali fonts correctly in a Web page.

  Presenty using Windows 10 and Firefox 41.0b5. Cannot see the Bengali fonts correctly in any Web page, but the edge or the Internet Explorer can display Bengali fonts nicely.

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can check if there is an update for your display driver graphic card and search for hardware acceleration of related issues.

  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• When I install the new version of firefox browser dose being not fit on my screen. I cannot see the tabs or the ul bar and not even leave the firefox avecjoint

  When I install the new version of firefox browser dose being not fit on my screen. I cannot see the tabs or the bar ul and can leave not even firefox without using ctrl-alt-del and opening a master and have it at the end of program. Help, please.

  You may have a corrupted file xulstore.json .
  https://support.Mozilla.org/en-us/KB/changes-toolbars-and-window-sizes-are-not-saved

• Whenever someone calls, I'm not able to take the call and cannot see the identification of the appellant as well. However, he gets noticed in the missed calls.

  I have an iphone 6. Whenever someone calls, I'm not able to take the call and cannot see the identification of the appellant as well. However, he gets noticed in the missed calls. Help, please.

  It is a problem of carrier - I would like to talk with my carrier

  Your signal may be weak or you can be in a dead zone - or there may be interference - those that can cause the call to go directly to voicemail

• I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help

  I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help, please.  Thank you!

  Hello golden2,.

  I understand that you have a DVD picture in your SuperDrive drive, but it is not mount on the desktop and will not eject.

  Please, try the procedure described in this article using the disc is ejected.

  Get help with the SuperDrive slot on your Mac - Apple Support loading

  Do not eject discs or discs eject slowly

  1. If the drive ejects discs slowly or appears to have difficulty, insert and eject a disc several times. Check the disc to see if it has a label or other material stuck to the disc which increases the thickness. Remove the label if possible.
  2. If the disc does not eject, try pressing the eject on the keyboard button. Some older keyboards may use the F12 key to eject the disc.
  3. If the disc does not eject, try dragging the icon of the disk to the trash.
  4. If the disc will still not eject, try to hold down the mouse or trackpad button after you restart the computer. The Superdrive should attempt to eject the disc.
  5. If the disc still does not eject, reset the System Management Controller (SMC) and repeat steps 1 to 4.
  6. If the disc still does not eject, Contact Apple or an provider of services authorized Apple, or make an appointment with a Store Apple Store for further assistance.

  Take care.

• where can I see the photos 'print screen '?

  where can I see the photos 'print screen '?

  They are in the Clipboard. If you paste into a paint program (type mspaint into Start - Run all programs - accessories -) or a text editor (Start - All Programs - Accessories - Wordpad). Also see the tool captures to capture the screen (Start - All Programs - Accessories - Snipping Tool).
   
  Copy the screen [Prev |] Next | Content]

  PRT Scn	Copies the entire screen to the Clipboard as a graphic or the screen with the mouse if you are using multiple monitors. Use MS Paint to paste the picture. It is also known under the nameof Office Snap. According to the key parameters of Prt Scn tab Misc properties of a Dos program, a program back can still print on printer Prt Scn keyed.
  ALT + Prt Scn	Copies the active window to the Clipboard in the form of a graph. This is also known as theWindows Snap.
  CTRL + Prt Scn	Copies the entire virtual screen when you are using multiple monitors in the Clipboard in the form of a graph. Unlike the other two screens to Print that precedes this one doesn't seem to have a name, or if so, it is not listed in the header of the window files.
  CTRL + Alt + key number minus button	Copies the active window to the Clipboard of remote desktop in the form of a graph (same as thePrt Scn locally)
  CTRL + Alt + number Pad Plus key	Copies the entire screen to the Clipboard in office to distance in the form of a graph (same asAlt + Prt Scn locally)

  Such programs that Outlook Express do not allow paste not web graphs. Paste into MS Paint andrecord under a web graphics. If the screenshot by email sending save it as a jpeg, gif or png file before sending (in MS Paint,file - save as, and then choose a format in Save As Type). The color isn't usually important for the screenshots is a way to make a really small file save as a GIF (this reduced to 256 colors), and then save the Gif to Png (lossless and better than Gif compression) or Jpeg (lossy).

  To take screenshots of the menus in the current use of the window the Alt key and hold it down during the entire procedure. ALT + a touch of letter to access the menus, then the keysdirection to move the selection, then Print Screen. Release Alt.
  --
  .
  --

  "Chrystalstrick" wrote in message News: a6a8f42c-03e9-429 d-91e8-6bca342fa0c6...

  > where can I see the photos 'print screen '?

• WUSB600N cannot see the router

  I have a WUSB600N on my XP Pro machine. You can see each router in the whole neighborhood, but mine. My router is a Linksys WRT300N. Can anyone help? Thank you.

  T

  That did not work. I read elsewhere that on an XP box, the WUSB600n cannot see the WRT300N router.

• My PhotoshopCC workspace is suddenly 'long' for my MAC screen.  I cannot see the bottom of the workspace and therefore cannot see the bottom of the vertical pictures.  How can I get this problem to what it has always been - set of the workspace editing on

  My PhotoshopCC workspace is suddenly 'long' for my MAC screen.  I cannot see the bottom of the workspace and therefore may not work on the bottom of the vertical photos.  How can I get that back to mount on display?

  Hi wassily.

  suggest you go menu window > workspace > reset Essentials

  and who needs to reset your workspace to the default.

  Kind regards

  Claes

• I've updated the cs6 camera raw and now cannot see the metadata of the camera I used to see and can't find it in photoshop itself.

  I updated the cs6 camera raw and now cannot see the metadata of the camera in the first I used to and do not at all see in photoshop.  This can be corrected?

  What operating system do you use?

  If your using a mac operating system

  http://helpx.Adobe.com/bridge/KB/ACR-84-bridge-CS6-metadata.html

• OIM 11 g resource request - approver cannot see the details of the request

  Hi all,
  
  I found a problem when you try to implement an authorization custom OIM 11 g. The approval workflow was working, but the approver cannot see the details of the user's request.
  The ID of the request, Beneficiery, Type query, request target are empty, and applicant show "Anonymous". If a connected as xelsysadm, this problem didn't happen.
  I use Self-Request resources to test the approval workflow.
  
  Please see the photo in this link: http://i1152.photobucket.com/albums/p488/Heri_Heriyanto/Jobs%20related/approvercannotviewrequestdetail-1.png
  
  What could be the problem? AM I missed permissions configuration and usage?
  
  
  Please advise...
  
  Thank you.

  Disable the composite. Cancel the deployment of your composite. Redeploy your composite, then turn back on.

  -Kevin

• 5110 printer wireless but the software cannot see the IP address

  Hello. I have a new printer Photosmart 5110. I turned on and it found my wireless network. I entered the key wireless and got an IP 192.168.1.68 and connected is displayed.

  I have an ASUS Netbook. It doesn't have a CD player, so I had to download the HP Photosmart installation software. I am running XP. When I run the installer, it asks if I have a printer connected wireless network. I enter the IP address and the message says printer not found.

  I use a BT Home Hub. When I log on the hub I see the printer and IP address.

  I can ping the IP address of the laptop.

  I can access the printer directly using Internet Explorer and entering the printer IP address - and I can print a test page with success.

  I have Norton Security and I turned off the firewall.

  I can't get the installation software to see the IP address of the printer.

  Don't you think that there is a problem with Norton blocking the IP (if so, how unlock) or something to the BT Hub?

  Can you help or give ideas I can try before I bring her to the store.

  Steve

  Hello Steveargy,

  you have the tray to run the network diagnostic utility? If this is not the case, can you please do?

  I hope this helps

  Best regards
  F.

• Windows 7 cannot see the Windows XP computer to use the printer

  I have 3 computer at home 2 desktop computers and a laptop computer. I upgraded one of desktop and laptop for windows 7. The computer that has still XP cannot be upgraded, but has the printer connected to it. The desktop and laptop w / Windows 7 on them can see the XP computer on the network, but that the Bureau connects and can use the printer. On the laptop is can he sees, but cannot connect, I get this message

  "Error code: 0 x 80070035.
  The network path was not found.

  In troubleshooting, it says "windows cannot find a computer or a device", but you can clearly see in the network.

  Hi moorebounce,

  If you use Norton, McAfee, Trend Micro or Kaspersky I.S., make sure sharing files and printers turned in THEIR Firewall (or LAN enabled, depending on how their Exceptions are formulated in their firewall) or you can temporarily disable the firewall and check.
   
  Similar question was dscussed in two threads below. The threads below we have answered for Windows vista and Windows XP, but they are good for Windows 7 as well.

  Follow the suggestions posted by Nicolas GMicrosoft support, Moderator on Wednesday, August 5, 2009 02:01
  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/e30f3ab0-b6cd-4610-A579-92abcb520f4f
   
  James-Support EngineerMSFT, moderator Saturday, June 6, 2009 18:48
  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/7846fdb1-AE66-467e-887d-0a981e6668f6
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.