Computer will not print wireless or network

Similar Questions

• OfficeJet 6700 Premium: HP Officejet 6700 suddenly will not print wireless

  I used my printer with my iMac, iPhone and iPad wireless with no problems, but today when I want to print wireless suddenly nothing happens. When I check the printer queue to see what the problem is, everything seems fine, it says: "printing - the printer is in use", but nothing happens in the printer. I clear the queue and you try to print a PDF document, a website, an email... but the printer does not have one of this command. I check the wifi conection and they are both connected to the same network. I am able to print the status report and the network directly from the printer Configuration Page.

  I have run out of ideas of how to solve this problem, apart from the connection with the USB cable, which will solve the problem of computer printing, but not from mobile devices.

  Do you have any sugestion for this problem?

  Easy things first. Power off the printer and the router. Turn on the router and wait 3 min. turn on printer and check that it connect to your router. Try now.

• I reset my router, now my two wireless printers will not print wireless.

  I reset my router and now none of my HP printers can print wireless.  They print with a USB key, but the installation program for the Wireless does not detect my wireless network.   I use an iMac and Airport extreme router.

  I have a different brand printer that works wirelessly now.  I don't understand why HP printers attached to the network.  Printers are c4780 and 4500.

  I tried your solution but still could not solve the problem.  I called HP support.  After a few minutes they determined that since it was an old printer and I recently updated my software on the computer and did a upgrade to the router, when I reset the router was not compatible with my printer.  They also suggested that I try with an old computer,.

  So, I ordered a HP OJ8600 at a great price and will move the printer on another computer.

  So Bravo are so your information, even if it was my fault for failing to provide more complete information, and given that the printer works somewhere else and I have a compatible printer on the way, I consider that this problem is solved.

  Thank you very much for your help.  I appreciate it.

• MX340 wireless scan but will not print wireless

  I had this printer running on Win 8.1 for some time and had never been able to get wireless working.    I was delighted when I met recently with the fact that Canon had finally provided drivers for win 8.1 so I installed them.  I set up the wireless and has been able to analyze something wireless.    I try to print at this time, but later (overnight?) I tried to print and it tells me that the printer is disconnected.   It will scan without plugging in to my laptop but it seems to connect properly.   The scanner and the printer work with two different wireless connectors?

  It's very frustrating because I use the laptop in the House and I could really use the wireless function.   It prints without a problem with the usb connection.

  Windows 8.1

  I tried all versions of the printer I could find available (2), but that doesn't seem to make a difference.   I solved my problem by uninstalling all versions of my canon printer and all the drivers and programs that I could find related to these printers and starting from scratch.   Not sure what I did differently this time, but I am now able to scan and print wireless.   Yes!

  Thanks for any help.  (took me a while to get to this...)

• HP Envy 4500: Printer connected to the router, but will not print wireless Macbook

  I want my wireless printer to work on my macbook, but I can't. I tried setting up on the HP utility to connect with the router as the mac and printer on but it does not work! It indicates that the download was successful, but the device was not reachable. I don't really know where to go from here and any help would be really appreciated. Thank you.

  Hey @miriamnimmo,

  Welcome to the Forums of HP, I would be happy to help you! I understand that you have the printer set up on your network, but the software says that the device is not accessible. Sometimes the IPv6 may interfere with the connection, and I suggest we disable that before anything else. On the fornt of the printer Panel, scroll down to and then select Wireless. In the wireless Menu, select Advanced settings, then IPv6 and.

  Now we are going to let the router and unplug the power cable (NOTE: do not reset the router), then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Please let me know if this solves the problem by marking your post as solved (click on Accept as Solution button below). If the problem persists, let me know, I'll watch for your reply.

  See you soon!

• Laptop running Win Vista will not print wireless connection

  I have a problem I'm trying to print on a printer of all-in-one HP Photosmart 2575 of my laptop.  The laptop is running Windows Vista and connect to the network using a Linksys WRT54G2 router is using.  The printer is connected by Ethernet cable to my desktop (Windows XP), and it prints fine.  No matter what I do to print via the wireless router, nothing happens except that the print output only goes to print that and sits down.

  I down loaded the software HP2575 of Vista and updates directly from the HP site.

  Six days ago, when I first installed everything on the new laptop, I did a test print very well.

  Computer portable printer is configured to print documents Spool and using the Port "Dot4_001 HP Device.  In addition, it has the value "share this printer."

  I tried a test and connected the laptop to the printer using a USB connection, and that runs just OK.  Wireless internet works fine for web connections.

  So, what have I done wrong

  I finally solved the problem. I don't know why it works this time.

• HP Photosmart plus b209a-metres will not print wireless

  This printer has had me very confused for a long time now.  When I got to the printer, I have had no problem in his wireless installation and be able to print things wireless.  But after that I had to restore my laptop I had a few problems.  I reinstalled and everything seems to work properly.  When I go in the settings of the printer and look at the wireless connection, he tells me that it is connected to my router, also when I look in my networks on my laptop, I see the printer.  But then when I want to print something wireless it tells me in the HP Solution Center that the printer is offline.  This makes absolutely no sense to me at all...

  I don't know what to do, I tried searching on google for 30 minutes for a solution, but I couldn't understand anything.
  Any help is greatly appreciated.

  Thanks in advance,
  Sweyko5

  Try this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

• HP Officejet 4620. Windows Vista. Acer Aspire laptop. Will not print wireless or cable w/USB.

  HP Officejet 4620/Windows Vista. No error message. Problems started after installing new memory cards and drives. I followed the instructions to the letter several times, without success. When I click on the "Print" button, all I get is a window popping up labelled "HP Officejet 4620 (network); below is a blue dot/circle with an exclamation point in the middle. to the right of that, "BOLD" letters that say 'the printer is ready. below is a message, "click OK to continue." at the bottom right of this window is the bar/button "OK". When you click on this button (that I have to hurry because the window flashes market again and again!), the window disappears and nothing happens: no error message, warning or any communication.  At the end of the day, I tried to connect the printer cable USB (nine) and got the same window. It makes me NUTS. The person said tech (friend) who has installed cards and disks to the IP address of the printer keeps rolling. If that's the case, surely linking directly to the computer with the cable would have worked? Someone please help!  Thank you.

  Hello UncaJon

  What application you are printing from? You can print from Microsoft Notepad?

  Also, try to run printing HP and doctor Scan. Let me know if it finds problems or if it passes all the tests.

  Try the HP Print and Scan Doctor

• my hp photosmart c4680 will not print over the network

  I set up the printer on a computer (it prints fine from there) I then shared it on the local network. When I try to print other computers it is said print, computer, it is connected to the so-called print and thus made the printer. but nothing prints help!

  NVM, I thought about it myself. instead of simply cancel the print through the computer job, that I had to cancel the print job directly to the printer. weird.

• HP C7200 all-in-One printer will not print via Wifi network

  I used the HP printing and scanning of doctor, but none of the proposed solutions have solved the problem. Blue light for service 802.11 g wirelwss is turned on and connected to the same Wifi address as my laptop is now using. My Dell laptop is running Windows 7 and the printer works if I use USB instead of Wifi connection.  Any suggestions?

  Larrypat

  I followed your suggestion and got the wireless link by manually entering the IP address of the printer during the wizard process.

  Thanks a lot to get me down the right path! I love my new freedom of wireless service. Thanks for the help.

• Printer HP CP1525nw Color Laser Jet not print wireless with Win 7.

  My HP CP1525nw Color Laser Jet printer will not print wireless with Win 7. It is not recognized as a wireless device when by Win7 'add a device '. It has worked very well in the past, but now I have to connect the printer with a cable to be able to print.

  Thank you in advance for your help!

  Sakii305

  Hi Sakii305,

  Thanks for posting your query in Microsoft Communities. The problem description, I understand that you are not able to print wireless. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You use a third-party security software?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow the steps in the article.

  Solve printer problems

  You can read this article for more information:

  Why can I not print?

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• Computer does not print

  I installed Windows 8.1 on my HP computer and now my computer will not print.  It's the only thing that has changed, it is connected to the internet, everything else seems good.  My computer is offline.  Can you tell me how I can solve this problem?

  Hello

  Glad to know that the problem has been resolved.

• OfficeJet 4620 3-in-1 printer will not print on the wireless network

  Have updated my Mac OSX to Yosemite (10.10), & now the 4620 Officejet will not see my WiFi network.  Have already uninstalled & reinstalled, used USB and installation CD.  Restarted the router also.  The printer went as far "Retore System Defaults".  Any suggestions?

  THX

  Hi @tomiet,

  Welcome to the HP Forums!

  I see that your HP Officejet 4620 will print on your wireless network, using Mac OS X 10.10. I'm sorry to hear that, but I'm happy to help you!

  I recommend trying an installation installation of Wireless USB. Please consult this guide, convert a wireless USB connected printer. In addition, this video can help as well, Configuration of wireless USB printers.

  I hope this will solve your problem of connection and have a nice day!

• My Windows 7 computer will not find the networks wireless after a system restore.

  My Windows 7 computer is not find wireless networks after I did a system restore. It was perfectly good wifi before the system restore and other members of my family have a great connection except me is not a problem with my router. I think I know what the problem is, but I just don't know how to fix it. So there you go. I did my restore system about 2 days after that we moved on the provider of internet/tv "Comcast" to the tv/internet provider "Verizon". what I think has happened, is that I restored my computer to the point when we had no Verizon so that he could not find the network. Now, since we have Comcast it won't identify this network either, so maybe some of you out there could help me. : D

  Hello Nicolas,.

  Thank you our writing about Microsoft Community.

  If your computer has a wireless network card, Windows will automatically detect the networks wireless in range of your computer.

  You may encounter network or problems of Internet in Windows for several reasons.  Some common problems that can cause these problems are:

  • A wireless network adapter switch that is not enabled

  • WEP, WPA, or WPA2 key or password security issues

  • Cables that are not connected correctly

  • Corrupt or incompatible drivers

  • Missing updates

  • Network connection settings

  • Hardware or software problems

  I would ask you to check out the troubleshooting steps provided in the articles below and check if they help you solve the issue.

  Why can't I find a wireless network?

  Wireless and wired network problems

  Here are some links to site Web de Support of Comcast, who talk about troubleshooting of XFINITY Internet connectivity issues.

  XFINITY TV App: Can't detect your XFINITY home network

  The problems of XFINITY Internet connectivity

  Hope the helps of information provided. Do we know the State of the question, so that we can help you further.

  Thank you.

• Computer Vista will not print to Deskjet 930c on home network

  Our three computers (Vista is A, B, and C are XP) are connected to a wired network of private home.  Computer A has a Canon printer that is shared and all 3 computers can print to that very well.  Recently, we re-gasket a printer HP DeskJet 930C to computer B (via USB) and shared.  Computers, B and C can be printed on the HP very well.

  But, even if A computer can see the printer, it will not print.  He seems to accept the print command and sometimes a dialog box flashes on and so quickly as it cannot be read, but nothing prints.

  I worked through the Microsoft article "File and sharing printers in Windows Vista" at http://technet.microsoft.com/en-us/library/bb727037.aspx#mainSection and you don't see anything that solves the problem.  I ran the doctor of printing & scanning HP and who wrote the 930C is installed but not connected.  According to the website of HP, Vista has the correct driver.  I have uninstalled and installed the printer from computer A, but it still does not work.

  So I called HP Support, and they said that I had done all the right things, and "it must be a registry problem.  This seems unlikely to me, and I don't know where to look in the registry.

  Any ideas or solutions?

  Hello

  Windows XP sharing can be done automatically in XP or operating systems, XP does not host the drivers for the newer Vista operating systems and so you will have problems with some models.

  To manually add the shared printer, follow these steps:

  1. install the printer locally in following second method: connecting the cable in parallel below:

  http://support.HP.com/us-en/document/c01655752

  2. go into your PC host (computer B), right click my computer and select Properties.

  Find the name of computer on this screen.

  3. go in Control Panel > printers and faxes.

  Right-click on the printer and select Properties.

  Open the tab end hand note the share name

  Note: I would say keeping the name of sharing as simple as possible (e.g., 930C)

  4. go to your Vista machine and open Control Panel > printers.

  Click with the right button on the 930c configured in step 1 and select Properties.

  Open the Ports tab.

  Click Add a new port.

  In this list, select Local Port.

  Set the local port in the form of \\Computer B Name\Printer share name (for example \\PC-P\930c).

  Confirm the changes and check any change.

  If you have still any question, I would say that the printer is connected to the Vista machine, then share it with the XP PC and check for any changes that should run more easily from my experience.

  Shlomi