Wireless configuration of HP Deskjet 3050 for new config router

Similar Questions

• is there a driver for deskjet 3050 for mac OS x 10.7?

  I just bought the Deskjet 3050, and am currently Mac OSX 10.7 on my MacBook Pro. The Setup disk will not work for 10.7 so how am I supposed to set my printer to my wireless network and my computer? Thank you

  OK, I don't know what is happening with the download.  Let's go help out the manual process that I have described above.

  Yes, you can type your password in the router's wireless - it's the only way he'll be able to join your network.

  When you turn on the printer (the first time out of the box), the wireless network it broadcasts only 40 or 60 minutes.  Then it turns off.

  To re - start the broadcast, do step 1. in the instructions.

• DeskJet 3050 connects to the router.

  I use a new HP Deskjet 3050 J610 out of the box (comes with a laptop purchase student a few years ago and was never used) with a MacBook Pro with OS X 10.9.1.  I configured the printer via a USB port by following the instructions and it worked well because the driver is preloaded in the latest version of Apple, but when I try to connect to my Belkin router the printer times out.  I ran the diagnostic page and the SSID names do not match.  I can't find a way to change the SSID the printer connect manually.  There is no HP folder on my computer that would normally House the printer configuration information.  I've looked through all the documentation on HP and can't find anything that tells me how to enter the establishment.  Any suggestion would be appreciated.

  Found the answer in an answer to a question on the HP Deskjet 3054.  Worked for my system, too, so I'm running.

• DeskJet 3050 j610a - new router; no longer can print wireless.

  Hi all. Am 66 & new to computers and the forums. I'll try to be brief, but I want to describe my problem as precisely as possible. I have a laptop Toshiba Satellite C655, HP3050 j610a printer wireless, Windows 7, 32 bit OS and Google Chrome is my browser. For the past 2 years I had wireless printing problem with my Westell 7500 router. Then my ISP (Verizon) gave me a D-Link 2750 B. My laptop connected to the internet via my wireless right now, but the impression is only possible via the USB port.

  Reads the error message: "your printer could not join the wireless network - Mac address filtering can be enabled on your wireless router. (I checked & it is not). Then I printed a wireless network Test report and the header reads as follows: "your HP printer cannot find your access point. Verify that your access point is turned on. Make sure that your network (SSID) HP printer name exactly matches your network name of the access point (SSID). If they do not exactly match, run wireless network setup to set up your HP printer. In addition, under the Diagnostics summary, it reads: 'Network Name (SSID) Found = FAIL.

  What I've tried so far: uninstall & reinstall all of the HP software (Via the website of hp), router cycle power & printer, printer reset to factory, looked inside the router & all seems OK. I did a search on Google for this problem and got more confusing and complicated explanation I was looking for... all the way to subnet masks; whatever it may be. I'm at the point now (and please correct me if I'm on the wrong way) I think I should try manually turn on the network news in the printer or get an IP printer. Neither of which I know how to do.  Is there a way to look inside my printer settings I look inside my router settings... and how?

  In my opinion, it has become much more complicated than necessary and I'm probably overlooking the obvious here. Any help would be greatly appreciated, but please respond to me as if I was in 3rd grade! (Although as a student of 3rd would probably have figured this out already)!

  Thank you

  Larry

  You can look in the printer for the first time after it has been reset only.

  On the front of the printer: Wireless > default settings.  Now, on your PC connect wireless network printer that starts with "HP."... »

  Print a network Test Wireless in the menu on the front of the printer wireless to get its IP address.  Type the address in the browser address bar to reveal the internal settings of the printer.

• How to install wireless on / to the deskjet 3050 a printer

  The configuration of the printer menu offers only two options... Press a butoon wps on the router or type in a PIN of the printer in the software of the router configuration. My Linksys router doesn't have a button to push for wps, and the configuration config software has no place to enter a PIN. In fact I don't never came across a router with these options.
  
  The network uses wep authentication open with a key. How can I configure this printer?

  Hello

  Just start installing this printer on the computer and choose network as the connection type, the software will ask you to connect a usb cable and the network settings will be done through the usb cable, leave it connected until the software tells you to unplug it.

  Turning to the WPS, routers new most are supported by this feature, either throug a button or an axis method, my own cheap sitecom router has a wps button even.
  
  Regarding the security of your network using WEP encryption, I suggest that you upgrade to WPA security. WEP is really outdated and is also useful as no encryption. For example, WEP encryption can be broken with free software within 10 minutes.

• DeskJet 3050 not IP address

  I can't get my deskjet 3050 for connect to the wifi.

  It has no IP address. Just the blue light flashes.

  Is there a way to reset the IP address?  Stop printer and starting again is not helping.

  Functions very well with usb for laptop/win 7 computer.

  My wireless network is WPA/psk.   Router is Netgear WGR614 v9

  Any help is appreciated.

  Hello

  You can try a hard reset with the printer and the router, and then reconnect the pritner to PC via the HP software.

  Hard Reset:

• HP Deskjet 3050 has Wi - Fi and router ZXV10 H201L Windows 8

  I am trying to establish a wireless connection between a HP Deskjet 3050 a and a router H201L ZXV10 with Windows 8.

  The wireless on the printer flashes, but it's not find the connection.

  Then try to connect by usb but the computer and the printer are not connected.

  Spent a lot of time :-(

  Jan

  GREAT!

  It's work!

  I did not change the language during the download, then maybe I have a different file now.

  Thank you for your patience!

  Jan

• How to replace ink cartridges hp deskjets 3050 has

  need to replace printers inkjet on hp deskjet 3050

  (new forum HP)

  Welcome to the forum, Griff.

  Your printer has its own website pages - in the section "Troubleshooting > How To ', come the instructions to change the cartridges:

  HP Deskjet 3050 has e-All-in-One Printer - cartridges

  The document includes a video to explain the procedure.

• DeskJet 3050 has J611 all-in-one: Mac cannot connect to the printer using the wireless configuration

  My printer is connected to the same network as my Mac. When you complete the Setup wireless using a USB in system (HP Utility) preferences, a message says: "wireless network settings have been successfully downloaded to your device. However your Mac could not locate the device on the network. »

  I did everything I could: restart the printer. Unplug the printer and reconnected on the network and configuration of try again several times.

  Help?

  Hey @benjaminllim,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the connection of your Deskjet 3050 has e-all-in-one printer to your computer Mac OSX 10.11. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Turn the printer off:
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer.
  4. Disable any antivirus, firewall or security of your Mac software.
  5. Try to run the installer.

  Please let me know the results after following the above. If you are able to print to the printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Mac Lion will not configure Deskjet 3050 a to the wireless router. Have installed software HP 3 times.

  My Deskjet 3050 series J611j was ooriginally configured with Mac OS Snow Leopard. I have since installed Lion (10.7.3). I inadvertently reset the default printer and it stopped connecting with the wireless router.  I installed the new software HP Lion but when I go through the installation, after that I tell the printer to connect to the router, I get a message saying that the device is not connected to the computer and connect with a USB connection. But it is connected with a USB cable.

  I fixed it by pulling on an old PC and launch the CD. Who got up the printer on the wireless. from there, I could finish and connect with the Mac.  Thank you.

• Problem setting deskjet 3050 610 a for wireless printing

  Hello.

  Try to put in place a deskjet 3050 610 a in a wireless network. Printer works fine when connected to USB, but it fails with "Error_000057" when trying to print wireless.

  Router is a BT Home hub 2

  With the help of an acer laptop runing windows 7 32 bit, connected wireless to the router (and online)

  Printer is connected to the network, blue light turned on, the IP address displayed

  Have tried to disable the firewall (AVG)

  Tried to reinstall software

  Using the latest version (DJ3050_610_231) of the driver from the HP website

  Any ideas, anyone?

  Thanks in advance.

  Print a network from the front of the printer test.  If it is connected to your router?

  If so, your AVG is probably the issue.  Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  What did he say?

• DeskJet 3050 a 1611 series to print wirelessly on Mac 10.10 yosemite

  How can I get my deskjet 3050 a 1611 printer to print wireless on my Mac 10.10 Yosemite WIRELESS?

  Agustin-Pinales Hello,
  There are two ways that we could get this to work, depending on your configuration. I would ask that you close the other post on the installation that you made so that others can find what was the solution, simply click "accept as a Solution.

  Now on your desktop with the way to wireless configuration. If you have a router that allows the WPS to be pushed, follow these steps.

  Option 1 - connect the printer to the network via the WPS button:
  On the police of the printer control panel
  1. press on the icon Setup - looks like a key
  2. Press 'OK' for 'Wireless '.
  3 use it up or down buttons on the right to select "Wireless Configuration".
  4. Press 'OK' for "Wireless Configuration".
  5 use up or down buttons on the right to select "Wi - Fi Protected Setup.
  6. Press 'OK' for "Wi - Fi Protected Setup.
  7. it will say you have two options, simply press the OK"" button.
  8. Select the 'Push' button for Setup WPS promotion
  9. follow the prompt on the printer press the WPS button on your router
  10. follow the steps to remove the old printer connection and add the printer with the new connection to the list of printers below

  You can follow the same steps above to enter a PIN, just change step 8 for "PIN" and follow the steps.

  At this point, when the printer is connected to your network, you should be able to follow the steps to add new printer

  Option 2 - Connect using the utility (printer installed and connected via USB)

  1. click on the Apple in the left menu bar
  2. click on "System Preferences."
  3. click on «Printers & Scanners»
  4. click on the "HP Deskjet 3050 has" on the left to highlight
  5. click on the button «Options & supplies»
  6. click the button of "Utility" in the upper right
  7. click on the button "Open Printer Utility.
  8. double-click on the icon "Wireless Configuration".
  9. If your Mac is connected wireless, choose Yes, 'keep these settings', then press the continue"" button.
  10. Select 'Allow' If a confirmation is requested
  11. click on 'done '.
  12. close the 'utility '.
  13. click on "OK".
  14. follow the steps to remove the old printer connection and add the printer with the new connection to the list of printers below

  Delete the print queue of the printer HP printer (unplug the USB cable to the printer)
  1. click on System Preferences
  2. click on Printers & Scanners
  3. click on your printer HP to highlight, then click on the "-" symbol below to remove it from the queue
  4. click on the button "Delete printer" to confirm

  Add the HP printer in the print queue
  1. click on the symbol '+' at the bottom left
  2. If a drop down list with the printers menu appears, just click on "Add printer or Scanner..." »
  3 select your printer HP printer or series (depends USB/Ethernet/WLAN connection type, so choose your HP printer with the correct connection, IE Hello for printers single function and Hello to an MFP multifunction)
  4. after the lower filled, click on the drop down menu to "use:" and select your HP printer series
  5. click on the ' Add ' button.

  You can also click on the link below for the other steps, if you need assistance. Or post here your results.

  Mac OS 10.10 Yosemite and HP printer supports

   

• Wireless on HP Deskjet 3050 a - J611 radio

  Hello world!

  I had my HP Deskjet 3050 a - J611 wireless printer set up sometimes too before on two different networks.

  But I have moved and deed of sale to set up again...

  Initially through the push button method he was always trying to connect to my SSID old so I put every thing to the original settings.

  But now I get an error code saying I turn on my radio wireless to the printer.
  To the best of my knowledge, I have: configuration > wireless > wireless settings > wireless switch

  Any ideas?

  mruttle,

  If you are looking to perform the replacement step to get the new information from the network, then no.

  The heart of the problem is that the printer indicates the wireless radio is off and there is no network name for your printer.  The SSID of the printer, when the network is present, must have HP in the name making standout from other networks.

  On the printer, go wireless > settings > default network.  Accept the prompt to reset the default settings.

  Most of the printers to disable radio wireless as a default setting.  Press the wireless button again.  If she turns in the lower right corner, go ahead and select this option.

  Now, go to the computer and search for a wireless network.  Is there a network name that inside HP or reflects your printer model?  If so, connect to the network, open a web browser and go to 192.168.223.1.  From there on, the previous steps should work.

  Let me know what happens.

• HP Deskjet 3050 has J611 series watch in trouble with wireless printing

  Hey there,

  I have just a series of combat a HP Deskjet 3050 printer a J611 and wireless printing to work perfectly. However, for the last week or so is no more.

  The printer is connected to the network, as the result of the wireless network test is proven and it is the same network that the laptop is connected to. I have already uninstalled and reinstalled the software. The wireless light is on and I can see the signal strength and the IP address. However, it still works.

  I also I sent an email to the printer to see if it worked. Initially, I received an automated email saying my printer is not connected to the internet and then printing will be delayed. I didn't touch the printer after that, but about 6 hours later it started to print.
  I also tried to connect the printer with a USB key and configure settings wireless via USB does not work either. The computer cannot find a printer connected to the network. There is no firewall blocking the application or the printer.

  My settings:

  Router broadband wireless ADSL2 + -.
  Huawei EchoLife HG521
  TalkTalk
  Laptop - Medion Akoya E7214
  32-bit operating system
  Windows 7 Home Premium

  Help with this would be much appreciated! Thank you!

  Larissa

  I doubt disturbed the other printer.  Kaspersky can be a problem, but we're going to explore other things first.

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• How can I configure a Deskjet 3050 a/J611 to my Chromebox?

  HP Deskjet 3050 J611 a.

  -Installation of the printer, and once, he printed the alignment page.

  -Went through the menu of the printer, but it has no option to print the "Backgrounder". All I could get it to print is the configuration sheet, who has no listed email.

  -Went to set up the printer in the Google Chrome browser settings, but just me links to HP site.

  -No instructions on how to use this printer with a Chromebox/Chromebook in the manual. HP offers Linux drivers, but never on their drives, but the Chromebox not the CD, of course. And wow, is that printing is really small for my eyes to 50 years.

  -Says it is connected wireless and printing confirms that, even if I also have the USB cable connected to the Chromebox.

  -Google offers no support, just pushes me on the HP site, who asked me to connect using my "new email eprint.

  What do I do? Thank you!

  The problem is that this printer is set up via the USB port, or something called automatic wireless. The autowireless configuration requires a windows or mac computer to connect.

  The alternative is the WPS configuration method, if your router supports you in the menu on the printer wireless, there should be a WPS option, and then when you have pressed OK than thr push button on the router. This allows to bind together the two devices, and the printer will have a full connection.

  There is another alternative, but it can be hit or miss.

  In the menu of the printer wireless, it takes an option to restore the default settings, select it.

  Soon in your chromebox if you look at available networks, you should see a network for your printer, probably scored something like HP-printing-3050, connect to that.

  In your web browsers address bar type in 192.168.223.1 - it should load a Web page for the printer.

  Here you should be abl to go to the top network, then wireless on the left, there should be a wireless Assistant to put your network name and password.

  After that, you should be able to get information page for web services, and then use google cloud print to print from the chrome box.