Wireless connection no longer works after that the virus

Similar Questions

• USB no longer works after that the BIOS flash to ABCN74WW on the new Z70-80

  Hello

  I started with the installation of Windows 7 on my brand new Z70-80 which worked well, worked USB 2.0 ports.

  After flash BIOS to ABCN74WW USB ports do not work any longer. I already tried soft reset BIOS by unplugging the power supply and the battery by pressing the power button for 20 seconds. USB ports are still inaccessible after that, a USB flashes for a moment, mouse LED is lit but no laser and no operation at all. Even when I start any new installation of windows.

  Is it of any known issues with this version of BIOS? Can I cancel the flash BIOS?

  Kind regards

  I do not remember on an option to backup the bios and certainly did not do. In any case, the upgrade from windows to 8.1 solved my problem...

• Windows Update and System Restore does not work after that the virus

  I recently had a virus on my computer, when I finally had removed my windows update does not work, my system restore will restore to any previous point and my computer seems to generally work more slowly.  Also groovemonitor seems still exists but is not really available to use, it runs in the process but is not available anywhere else.  Any suggestions?

  Hi TedDanson,

  1. do you get an error message when you try to run the restore system or Windows updates?

  I suggest you run a complete antivirus scan using Microsoft Safety Scanner to make sure that there is no virus infection:

  Microsoft safety scanner

  I hope this helps.

• IR remote stops working after that the system will switch to standby

  IR remote no longer works after that the computer goes to sleep.  I use Windows Media Center (Vista) to the TV and use the remote a lot.  The ONLY way to make it work is to restart the machine, which is a PITA.

  In the device, here is what is displayed Manager...

  Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  I tried uninstalling, reinstalling the driver, unpluging the receiver IR USB, displacement of ports, etc., the software MS difficulty he tried, but nothing works.  It allows to work all the time, but these last few months, you must restart the computer to operate the remote control.

  Any ideas?  Help, please.

  BTW, it is a HP Desktop Media machine, and the remote control is the standard HP remote given out with their machines.

  Here is the official Microsoft fix for error code 38:

  Code 38: Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory
  http://TechNet.Microsoft.com/en-us/library/cc772090%28WS.10%29.aspx

  Have you tried to deactivate "standby" and checked for the repetition of the problem with the IR remote?

  You can ask your question to the Media Center experts at the green button forum:

  http://thegreenbutton.com/

  Have a Word with the help of HP to see if they have a fix for the same.

• My internal microphone no longer works after that was plugged in a mic

  Hey guys!

  I bought the HP Envy 13 spectrum (13-2113TU) earlier, and everything was smooth and functional until yesterday when I plugged it in one of these headphones with the MIC designed for phones in the 3.5 mm plug. For a second, that it did not work, but after that the external microphone worked fine. However, I find that after using the earphone, the internal microphone no longer works on Skype or any where else and it seems there is no way to test whether it is functional or not.

  In the audio Panel, there is only the stereo mix and microphone option external availible under recording devices. I checked the boxes that says see the disabled and disconnected devices but there seems to be no way to activate the interal peak. All audio drivers are up to date and nothing is cut.

  Nobody knows what is happening and what are the steps I could take to solve this problem. Thank you.

  Hi Shabab,

  I understand that your internal microphone no longer works after that a microphone is plugged into your HP Envy 13 of spectrum. If you follow this document on the microphone does not work after a webcam or a microphone USB is installed, it should solve your problem.

  http://support.HP.com/us-en/document/c01926155

  I hope this helps.

  Thank you

• Keyboard does not. Able to use for the connection does not work after that.

  The keyboard works to connect. But does not work after that.

  Hello Sml15,

  The embedded screen keyboard should still work even if the physical keyboard isn't.

  Try this first...

  Press and hold the Windows key and the space bar.

  If no joy, go to the search bar and with the built-in keyboard, type the filter keys and choose key filter on or off.

  In the window of the ease of access to the keyboard, disable FilterKeys.

  If all goes well, which will fix the problem.

  Let me know how it turns out.

• Wireless connection fails on G10 after changing the motherboard

  I had a few problems with my wireless for quite awhile. Basically, whenever I turn on my pc my internet connection fails. I always do an RSP on my wireless connection. Finally, it works. This problem started when a technician has changed my motherboard to another question. Since then, it has changed my wireless card. The problem remains tho. Is there a patch for this?

  Hello

  Is your wireless network, Intel 2200BG If yes try to download the software for this www.intel.com. It is if you have a connection. Another thing to try is to go to the properties of the wireless card and make sure that the power supply is set to high and the output amplifier is set to enabled.

  It could be a mix up with the router by which DHCP not allocate an IP address that is inappropriate. You can go into the router through the admin option and disable this feature. However, you will need to return the laptop an IP address. Click on network connections and click with the right button on the wireless connection properties. You should see the list Internet TCP/Ip Protocol. Double click and assign the IP address manually. You must also enter the other info that can by typing ipconfig in the folder c: / prompt.

  HTH
  Norskman

• Gmail no longer works after reinstalling the operating system

  I posted on a forum for Gmail and no one answered. But on the fact that I can access these gmail accounts via web browser and Microsoft Office, I think there must be a problem with the configuration of Mac. I'd like some suggestions to solve my problem!

  Recently, I have reinstalled the OS El Capitan on my MacBook Pro 2013 retina. Before the reinstall, I could access all my Gmail accounts through the native application of Apple Mail. Since then, I couldn't access any of my Gmail accounts via Apple Mail.

  I tried to disable the two-step verification, but which is not resolve it.

  I deleted all count them several times and follow the steps below, but still can not get added (don't say one of the definitions to be insane is doing the same thing twice and expects a different result?

  Here are my steps that I take every time:

  When I connect, I use my Gmail password.

  Accounts/new Internet account

  Select Google

  Enter my user name and click Next

  Enter my password (not the specific app password, but the password for Google. I tried both and he always tells me that I have to use the Google password.)

  Click next

  The dialog box then says "select the applications you want to use with this account (and the logos of Google lies at the top of this box.).

  My options are:

  Mail

  Contacts

  Calendars

  Messages

  Notes (all logos Mac for those apps)

  All are checked, but I uncheck everything except Mail

  Click done.

  The gray button 'Complete' on

  Finally after that probably 60 to 90 seconds, I get a message through Mac OS that says 'Google account you added'"[email protected] has been added.

  In this box, I gives me the options of 'Not now' or 'enable '.

  If I select 'Enable', then I get the message through Mac OS that says 'Google password required'. I get my password, and the cycle repeats again and again.

  If I select "Not now" then the account appears as 'Inactive' in my list of accounts on the internet. Once I selected, I am immediately invited for the password... and the whole process starts again.

  Facts:

  Accounts are active IMAP.

  Accounts have two factors of authentication disabled. If I turned it on, the same things happen, with the only exception to receive messages and receive through my method to deliver, security code, but once I entered it, it can still access my mail.

  I have four other Gmail account, and what is happening in the same way with them all.

  They are all very well via a browser-based email

  They are all accessible through my iPhone and iPad.

  I can't access any of them through the native mail app Apple.

  They are all accessible through Microsoft Outlook e-mail client (2016)

  I even tried to disable the option to allow 'less secure apps.  I tried it on and outside, and nothing works.

  I'm ready to give up all my Gmail accounts at this point.

  Any ideas (other than to get rid of Gmail!)

  If you have not tried this, after completing the settings, try to delete Internet accounts. Go to Mail/preferences/accounts, and then add the accounts there.

• After that the virus can not connect to internet

  My computer running Windows XP has been infected by a virus 'Alert system' fake who took over the office and hide all my files. I was able to restart in safe mode, run Malwarebytes and Microsoft Security Essentials to capture and remove some viruses. I was also able to display most of my files and desktop programs. (I also tried to do a system restore, but this doesn't seem to work). However, I can not connect to the INternet using Internet Explorer. I reset IE, but I can't always connect. It seems that IE starts to open the URL, but is then blocked somehow by the virus, which redirects to the default "diagnose the problem. The cables are connected and the Internet works. What other options are bypassing them that blocking and/or resettlement of IE.

  The error you received seems to indicate that there is a need to reset Winsock.  You could try running the FixIt program contained in this article, or the manual procedure:

  "How to determine and recover Winsock2 corrupted in Windows Server 2003, Windows XP, and in Windows Vista"
    <>http://support.Microsoft.com/kb/811259 >

  HTH,
  JW

• On NEW laptop keyboard does not work after that the screen keyboard has been activated and then deactivated.

  Look at my friend got a new laptop and went through the whole upward. the on-screen keyboard has been activated which invalidates the real keyboard when the on-screen keyboard has been disabled the real keyboard has NO return. If this is a bug... Fix it. This is not a driver issue, it is not a user error. Stop giving people answers, trying to pretend like it's not not the OS when most people already know that it is.

  I'm sorry, but I didn't not new meant only one day.  And when I got my new laptop, one of the first things I did was to create a point of files, even a day later I had a restore to use - point and that was possible here as well.  I'm sorry it wasn't the case.

  If the system restore option is not available, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, you can try to go into the BIOS during the startup (the key appropriate to push appear on the screen to enter the boot menu or boot installation - try them both in turn if both appear. It is possible that the BIOS contains an option to disable the keyboard (which may have been activated by the keyboard on the screen but not changed when disable you the on-screen keyboard) and you may need to re-enable manually.  There is a slight possibility, but it is an option to try.

  Another option to try is to set up a new user account that has never used the keyboard on the screen and see if the regular keyboard works when you connect to this account.  If so, you can simply treat the original as a corrupt account account and use the following procedures to complete the transfer.  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.

  I hope that one of these aid procedures.  I'm sorry if they seem to 'generic', but we do not really know what is the problem - especially since the system is new.  We try and identify the cause and fix the problem at the same time using the procedures available to us.  I suspect there's a registry tweak will correct this problem, but I went through the whole registry, and although I found several referencers keyboard, I could find no which seemed to control or not activate the main laptop keyboard (though it has been in one of the entries that has been encoded in binary that I couldn't read).  It's possible someone who knows more about the registry will respond to this issue with a proposal to amend (or perhaps another solution).

  I hope that one of the solutions I proposed works.  Please post back in all cases we will know whether or not to continue searching for an answer.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• All USB Ports no longer works after that Windows 7 update error Code 52 Dell Inspiron

  How repairing USB ports when they have all stopped working after updates. Error Code 52 Dell Inspiron 1720. Pilot not signing not recognized.

  You can check the following registry key? :

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)

  Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?

  If so, what is 'Data' for these names?

• Wireless Networking no longer work after reinstallation of Windwos 7

  My Acer must have reinstalled Windows 7 and now I can't use it in wireless mode

  My Acer must have reinstalled Windows 7 and now I can't use it in wireless mode

  Sorry, I don't recognize the problem. Please provide more information on your problem make it easy for technicians to solve. 

  Method [1]: Make sure that Windows recognizes the driver

  • Click on the start menu and select run...
  • In the text box, type the following: compmgmt.msc
  • In the left pane, select the device under System Tools Manager
  • In the right pane, verify that you can see your name of the driver under "network adapters". If this isn't the case, then your not maybe probably not installed driver. (You can see an exclamation mark beside the pilot. If you do not see the brand, then Windows could not detect that the pilot has been attached to the system)

  Please note that some laptops / motherboards come with a CD/DVD that contains the drivers installed on the laptop / motherboard. Sometimes, these drivers are included with the Windows CD that appears with the laptop. You must insert the CD/DVD that came with your laptop to be able to use the drivers that it contains. You may also problems with the sound card, VGA card and the cards network.

  You can search the Internet for drivers if you do not find your CD/DVD.

  Thank you
  I hope that was helpful :)

• White screen after that the virus KLPD, same save modus starts

  Hi, yesterday while surfing the internet has become my white screen, it was the virus KLPD. I found on the internet that I had to download the kaspersky rescue disk and run it on my pc so I could scan my pc on the virus and after that my pc should be normal. So I did what they asked, but now, whenever I start my pc, when I would have my office, I get a white screen and when I pres ctrl + alt + delete I can get in the menu but the management tasks does not start. Now my question how can I come back all my documents and work normal again to my laptop. Its a HP Pavilion dv6000 Entertainment PC.

  Thank you

  Hey AlexDedeur5,

  You may be able to create a Live CD. This is a CD with an alternative operating system that runs completely from a CD rather than your hard drive.

  Using a Live CD, you can access your hard disk just like you acceding to a flash drive. You can copy and paste your files from the hard drive of your laptop computer to a flash drive or external hard drive. You will need to scan that disc flash drive/external hard with a reliable anti-virus program before opening or transfer these files to avoid infecting a second computer.

  To get a very good Live CD is Knoppix. I used it before a couple times to get data from infected computers and hard drives, partially damaged by a fall. Here are some links that provide you with more information about Knoppix.

  How to recover data in Linux

  5 tips for using Knoppix to recover data to a PC starts plu

  How do to retrieve the files from the laptop with Windows crashed using the Knoppix CD

  Once your data is backed up and scanned with an antivirus, you will need to re - install Windows on the hard drive of your laptop. You can have a recovery partition which you can access by pressing F11 as the computer powers on. If you do not have the HP Recovery Manager, choose System Recovery to factory settings.

  If you are unable to the HP Recovery Manager, or it has been lost due to virus, you will need to re - install Windows with a set of recovery disks. If you do not already have your own records, you can order them through HP. If you could provide me with your exact product number (and your country if outside the United States), I could link you to your order for your particular laptop. Here are the steps to finding your product number.

  Please let me know if you have any questions or if one of these suggestions helped (this might help others with the same question). I'll keep an eye out for your answer!

• Could not open software a plus any shortened after that the virus was briefly in the computer. Everything that I click on it it says "choose to."

  It says "choose the program you want to open this file with ' there is no options that work.  I can't my programs to work.  I tried the system restore, but I'm going to the same error message.   Help, please!

  Hi allyMT,

  1. did you of recent changes on the computer?

  2. where you can remove the virus from the computer?

  3. do you have security software installed on the computer?

  Method 1

  See the Microsoft article below and run the fix it tool available, check if it helps.

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

  Method 2

  If the previous step fails, then analyze and remove any malware or computer virus infections and check if that helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  You can also use Microsoft Security databases to scan your computer

  http://www.Microsoft.com/security/PC-security/MSE.aspx

• Pilot missing after that the virus

  After a virus and need to upgrade to Vista, because of all the damage, the virus caused, during the restart I get a message of pilot missing for c:\windows\system32\juporoji.dll.  Anyone know where I can get this driver safely and where it takes place in Windows?
  Thank you

  Google finds almost nothing for it.

  It seems that you can still be infected with malicious software, or have a stay starting entry of for her.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the problem persists, use this program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner