TM2 2100er / wireless connection of HP does not work

Similar Questions

• wireless connected but internet does not work

  Since yesterday my laptop has had problems connecting to the internet. It will say that it is connected to the internet but yet when I open a browser or any other program requiring internet, it does not work. However, when I use the same connection from another laptop, the internet works.

  I tried to use the option diagnose & repair and he always tells me that everything is fine. I also tried to restart my laptop and check my firewall settings, which did not help either. any help would be greatly appreciated!

  Hello

  Turn off the router or the modem (unplug the power supply) - wait 3 minutes, then the power restore - restart the computer.

  If necessary:

  Two methods - I would try 1. first and use 2. only if necessary because with 2 it can come back.

  1.

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon. If you usually use WiFi try a wire
  and if you usually use a wire try WiFi. Update, one being not used 1.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for card (NIC) network and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your router wireless and wired - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  ==============================================

  2.

  Do a system restore before it happened.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• Wireless connects, but internet does not work

  My wifi signal is strong. My computer says that it is connected. Diagnosis shows the signal is stable, but when I open a browser, it does not connect. It just seems to take forever, but nothing ever happens in Safari. Chrome has said, "there no internet connection. Your computer is offline. "and that Firefox says: 'server not found '.

  I tried the Ethernet connection, but it's the same story. Computer indicates recognition signal, but it will never truly connect. It will connect in Safe Mode, however.

  I don't know if this is related, but iTunes does not work either. I open and just get the reel spinning forever. It is said he is unresponsive, and I force quit.

  Here is some information that might be useful:

  -iPhones and MacBook in the House are fine to connect to Internet.

  -My internet company just came and installed a new router/modem. We had a few problems before (this is why they came to reinstall the hardware), so I don't know if this has something to do with him or not.

  iMac

  OS X El Capitan 10.11.6

  3.2 GHz Intel Core i5

  Deselect if selected proxy.

  System Preferences > network > advanced > proxies tab

  Unlock the lock if you have to.

  Under "Select the Protocol", uncheck all box if marked cheque.

  Click 'OK' and then 'apply '.

• My labtop sound works, but when connect the headphones does not work

  My labtop sound works, but when connect the headphones does not work. Note that the headset before 1 HR was working.

  Hello

  ·         Are these USB headset or headphone jack analog standard?

  ·         What version of the operating system is installed on the system?

  If you continue Windows 7 or Windows Vista refer to the procedure in method provided below and check if they help to resolve the issue.

  Method 1:

  Step 1:

  You can check if the headphones are activated as a playback device. To do this, see the following steps:

  (a) the Pearl-click Start and type Sound in the start search box.

  (b) in the Start Menu Options, select change adapter settings .

  (c) then, on the Read tab, right-click and select Show hidden devices and Show disconnected devices if they are available.

  (d) select headphones and select

  Step 2:

  Also try to put headphones of default device and check, follow the steps below.

  (a) go to Start and click on Panel.

  (b) click Sound, and then a new window will open.

  (c) in the new window click on the "Playback" tab and right-click in the window and click on Show disabled devices.

  (d) now check if headphone is listed there and right-click on it and choose activate.

  (e) highlight this helmet and click on "as default'.»»

• I am trying to create a VPN connection, but it does not work

  I am trying to create a VPN connection, but it does not work
  The wizard cannot establish a connection. And if I try to record simply does not connect
  It does not work. If I try to click on find the problem, there simply
  do nothing.
  I tried it on another pc, where it worked. So the problem is not the
  router or data network. And the curious thing is that I installed it before, but only from one day to the other, the VPN connection was missing.

  It does not create even a the connection icon
  Thank you

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite L300 - wireless switch power switch does not work

  I installed XP on my L300 - 110 (PSLB0E), cause I don't like Vista. I installed all the drivers, and everything is quiet OK. But one thing little annoying me - wireless, switch, it does not work. So I can turn on Wi - Fi only by pressing Start-> connections and so on.

  I need help! Who can tell me, what driver or software do I need to install? Thnx a lot!

  Hello

  Do you mean the hardware switch on the side of the fron of the laptop?
  Normally this switch still works because he founded material s and must always be defined on IT if you want to use the WLAN and OFF to disable WLAN.

  Have you tested the switch on OS preinstalled Toshiba? Maybe it's a hardware problem

  Make sure that the latest drivers are installed!

• Impossible to find wireless adapter/driver installation does not work

  I recently had to open my laptop HP G7 to blow off the dust of my fan and under the keyboard. When I put they keyboard back together, my wifi does not work. I am now on an ethernet connection. Open a network connection, there is no icon wifi adapter. I tried to install the driver, but mid install, I get this message "the driver that you want to delete the files will not be deleted as the corresponding card is not installed". I don't know what that means, but when installation is finished, the Wi - Fi connection does not always appear in network connections, and the driver does not appear in Device Manager. What else can I try?

  Hi @king26 ,

  Welcome to the HP Forums!

  I would like to take a moment and thank you for using the forum, it's a great place to find answers. You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I think that after you open your laptop to clean dust from your fan and that breaks down your wireless card is no longer recognized.

  I suggest deleting and reinstalling the wireless card, as it can move during the cleaning process.

  The driver could not complete the installation because he couldn't find the map to focus on.

  Please let me know the results.

• Update error Code 8024200B & unable to update Wireless Keyboard 800 - keyboard does not work

  I have win7 pro 32-bit. Some updates fail.
  Currently updates for keyboard and mouse USB MS they return the error Code 8024200 B, for which I am unable to find an explanation.
  It is a problem that I bought a Wireless Desktop 800, and the keyboard does not work.
  I tested the material on my Win7 32 bit system and it works fine.
  The device is detected and enabled, etc. of thin batteries
  There is no drivers for 800 system, so I was hoping that the update would solve the problem, if I could install it.
  Any ideas on the error code, or how to solve the problem of keyboard?
  Thank you
  * Problem solved. These updates succeeded at the 5th attempt - and I was able to install 'Microsoft mouse & keyboard Centre' that got my keyboard working *.
  * I'll leave the rest of my response below in case it would be useful to all. **

  Thanks for the reply Fazil.

  1. There is no way to 'connect' from the keyboard to the computer. I insert the usb bluetooth dongle and it works for the mouse but not the keyboard.
  2. the updates are the two option, without numbers KB:
  -Other hardware - Microsoft Hardware Microsoft USB keyboard
  Mouse Microsoft USB - other hardware - Microsoft Hardware
  3 update error message for both simply put the Code 8024200 B. There seems to be no documentation for this error code.
  All security updates I ran & updated ok.
  I tried various things - stop programs anti-virus etc.
  4. This is the first time I tried to run the mouse wireless 800 & keyboard on this PC. I checked on my other laptop running exactly the same OS and that's fine, this isn't a hardware problem.
  I tried fixit, who found nothing wrong.
  In Device Manager, it shows the two devices (keyboard and mouse) twice, as on the other laptop.
  Bluetooth > open settings Options are set to "enabled" and in the material it shows "HP Integrated Bluetooth Module" and "Microsoft Bluetooth Enumerator.

• Wireless on my laptop does not work

  The wireless on my laptop will not work.

  There are two other laptops in the House that work well and I already talked to my broadband provider who confirmed that the internet connection was working fine, but for some reason that my laptop can not find a connection. I was told that I probably need to get the wireless uninstalled and reinstalled him. What can I do?

  I have a laptop Toshiba Satellite. Please help, thanks. x

  Hi simone,.

  First of all, it would be useful that you post the model number of portable exact because there are a lot of Satellite phone on the market.

  Theoretically, it could be a problem of your WLAN driver and it is advisable to update. The latest version, you can download the portal of Toshiba WLAN:
  http://APS2.toshiba-tro.de/WLAN/

  Also make sure the version of the BIOS is updated too!

• The Microsoft Wireless mouse right button does not work

  The right button of the mouse on my Microsoft Wireless Mobile Mouse 4000 does not - at first I thought that it was a hardware problem, but when I used the mouse properties/control panel to change the buttons on the mouse, the right button worked and the left mouse button does not, which leads me to believe that it is related to the software/driver.
  I have the latest version of the driver/Intellipoint software.  I am running Win 7 32 bit on a Lenovo ThinkPad T410.
  Change the port USB did not help; the problem persists, no matter which USB port I use for the receiver.
  Reinstall the software Intellipoint also did not help.
  It is a recent issue; I had the mouse for several months and it has worked well upward until a few days ago.
  Googling the problem that leads me to believe that it is a common problem, although most people seem to think it's a hardware problem.

  Hello

   
  Run the Fixit described in the article:
  Troubleshoot a wireless mouse that does not correctly
  
  http://support.Microsoft.com/kb/321122
   

  I also suggest you to remove the batteries in the mouse and keep it idle for 10-20 minutes. Insert the batteries and check it out.

   
  See also:
   
  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398
   
  I hope this helps.

• Qualcomm Atheros AR5BWB222 Wireless Network Adapter adapter does not work.

  I have Acer laptop V3-571.

  I have upgraded to windows 8 Windows 7.

  Adapter Qualcomm Atheros AR5BWB222 Wireless Network Adapter is showing work fine in Device Manager, but the wifi does not work.

  When I checked the soft switch in the Pc, swith found to disable the position. Could someone help to solve?

  Well I solved it by bypassing the wireless adapter and buy something external usb nano wireless, it works perfectly now. problem still not fixed however.

  I found a way to fix my network, ive manually uninstalled the network cards, drivers and downloaded the following file "win78 - 10.0.0.75 - whql" of
  http://www.Atheros.cz/Atheros-wireless-download.php?chipset=81&system=6
  and simply installed the driver via Device Manager

  Hope this will help some of you.

  Kind regards
  Stamp of Pieter

• I try to click on 'connect', this option does not work.

  Hello

  I tried to download a free trial version for Adobe photoshop and the option "Log" for it does not work on my desktop. What I would do in this regard?

  Thank you.

  Debopreeti Mukherjee

  Please run the vacuum cleaner to remove traces of CC and Adobe Application Manager, and then reinstall it again.

  1. remove the cloud creative app.

  • https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  2. install Creative Cloud app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

  Let us know if you use the cleanup tool and remove Cloud Creative & AAM.

• Wireless with Tecra 9000 does not work

  Hi, I have a toshiba tecra 9000, in the last weeks that I had problems with my windows xp, so I decided to install win 2000.

  2000 is more stable, but I had a problem with the wireless card... I installed the latest drivers downloaded from the toshiba Web site... wireless card is installed successfully, but when I run the client Manager there is no way to find my access point...

  I have no signal and cannot find any network... can you help me?
  Thank you

  The laptop is connected to the access point with the installed XP?

  First, please be sure that your card wireless network has been activated on the laptop in the right way.
  The switch on the side of the laptop and the FN + F8 should be used to activate the wireless card.

  Does AP support the same standard as minPCI installed wireless network card wireless. I mean A. B or G standard.
  The router and the card should support the same standard to pair properly

• Follow this procedure when the Sansa Connect recovery tool does not work!

  Hey people;

  This thread is just to consolidate the info from a lot a longer wire, earlier.

  Currently, the Sansa Connect recovery tool may or may not work for you.  You can see an error like 'failed to connect to the Internet' or "cannot retrieve the device, SanDisk contact technical support for assistance."  If Yes, it's probably because the recovery tool is unable to download the firmware images he needs zing.net.  SanDisk has not (yet) recognized this problem.  The strange thing is that * sometimes * recovery tool works, if you already have images of the firmware on the drive... but usually it doesn't.

  So here's what you do (with thanks to Larlos for providing the firmware images and order lines to their installation).  This assumes that you're 'stuck' to the "necessary recovery" post on your connection.  If not and you are in the regular menu of Sansa Connect, first follow steps 2 and 3 in this paper: http://mp3support.sandisk.com/tools/connect-recovery-instructions.pdf, do the following:

  (1) download the zip file containing the images of the http://www.megaupload.com/?d=UNLDGZ1N firmware

  (2) search for the following files in the zip file, and then copy them into the directory of your drive "C:\Program Updater Connect Device Recovery\cmdline":

  • everest_initrd_ext_prod_1.1.1.50239.SRR.e
  • everest_vmlinux_ext_prod_1.1.1.50239.SRR.e
  • yeverest_zap_ota_rel_1.1.2.65799.tar.gz.e
  • yeverest_zap_ota_rel_ext_prod_1.1.2.65799.SIG

  (3) in the same directory, create a file named recovery.bat that contains the following three lines:

  zsi_fw.exe w everest_vmlinux_ext_prod_1.1.1.50239.srr.e everest_initrd_ext_prod_1.1.1.50239.srr.e

  zaprecover.exe t 600000 f yeverest_zap_ota_rel_1.1.2.65799.tar.gz.e yeverest_zap_ota_rel_ext_prod_1.1.2.65799.sig

  pause

  (4) connect your Sansa Connect USB.

  (5) run the recovery.bat file (double-click it in Windows Explorer, or run from a DOS command prompt).  The line of 'pause' is there only so you can see the results of running if you run it from Windows Explorer.  Expect the recovery to the end; at the end of that your connection will restart.  If Windows displays the hardware wizard detected during this process, simply cancel the wizard.

  whturner wrote:

  Thanks for the help - it updated my white box to connect to the WiFi and after registration on Yahoo (without choosing any service, just updated my old email and user ID) I now INet radio with a number of stations that work fine on my home wireless network. To do this, DND to explore and syncs with WMP OK. A few quirks that I wonder about.        (1) after the firmware update, my ZAP showed that 1.2.0.58335r and OS = 1.2.0.58835 - NOW (the next day), it changed to ZAP = 1.1.2.65799r and 1.1.1.50239 = OS. Every thing seems to work even though; I have a firmware download while I was playing with the INet radio?     2) there is also a new menu item "Server Zing" that lists the name of the module, the version, and the primary and secondary server. Is this normal?  (3) what Yahoo service I - I see a small Y! symbol at the top right of the screen.                                                                                                                                               Thank you very much and congratulations Warren

  (1) no; you see the version numbers are associated with the files of the firmware (names starting with "everest" and "yeverest" files) that you have either downloaded when you ran the recovery tool, or download in megaupload.com zip file.

  (2) Yes, it's normal.  Zing is the company that allows you to manage authentication of audio stream and firmware for the connection.

  (3) the Y! symbol indicates just that when you use the Internet Radio feature, you are streaming audio of Yahoo (in fact, now owned by CBS Radio).  There is also a function of Flickr photos, which is associated with Yahoo.

• Microsoft Wireless Optical Mouse 2000 does not work.

  Original title: mouse

  I use a Microsoft 2000 wireless optical mouse on my laptop and it won't work, even if you say that my device is not working properly

  Hey nanapaw,

  Please see two items of the below knowledge base for help.

  Troubleshoot a wireless mouse that does not correctly

  http://support.Microsoft.com/kb/321122

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.