Wireless disconnect all of a sudden and then adapter is not found until the reboot!
I am currently using Acer Aspire 4740 G with Windows 7 Home Premium. Previously, the problem I encountered was that the wireless card is not found when you turn on the laptop with the battery. The problem could be fixed by restarting until the adapter is found, or just plug in the power cable.
Not sure if this helps, because my problem seems to be fixed now.
Tags: Windows
Similar Questions
-
I recently bought a new camera from Sony a7 - ii. the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightroom" I have the most updated version, I think as 5.7. What should I do to get these files imported as raw files?
Hi Bobsirkus,
The camera you have is compatible with the latest version of Lightroom, which is Lightroom 6/CC.
Please see the list of the camera supported by Lightroom: supported by Adobe Camera Raw devices
You can use the DNG Converter, converts images and then import them into DNG in Lightroom.
Kind regards
Tanuj
-
Hello
I sat down and opened my screen and adobe wanted to download something again, and then all of a sudden I get a warning from windows saying that my firewall is turned off and my computer is in danger. It took me a few trys to get turned back, and I would like to know how the firewall can be turned off when I had turned it on in the first place and how can I prevent it happening again?
Thank you
Your computer may be infected with a variant of malware which disabled firewall on your computer. I suggest you sign up for the malware removal Forum and then follow them instructions to scan your computer and by publishing a newspaper.
While you're waiting to be helped, do not attempt fixed automatic as they can only aggravate the problem.
-
why I can not go back more than once all of a sudden and double letters are not allowed?
I have to reset the cursor to go back more than once and nothing can hit twice (the second will not be displayed) very very frustrated!
Hello
- You did changes to the computer before the show?
- Is - this USB keyboard or wireless?
- What is the brand and model of the computer, the mouse and keyboard?
- What version of Windows are you using?
- The issue is limited to a particular application?
Please follow the steps below.
Method 1:
Run the troubleshooter mentioned in the link below
Windows Vista http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-keyboard-problemsWindows 7: http://windows.microsoft.com/en-US/windows7/Open-the-Hardware-and-Devices-troubleshooter
Method 2: Check the boot issue.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135NOTE: After completing the troubleshooting steps, please reset the computer to start as usual (see the STEP 7 of the article mentioned below)
I hope this helps!
-
channel and sampling rate is not updated until the next cycle
Hi all
I'm new to LabVIEW and I wrote the code for the measurement of temperature using the cDAQ-9178 or NI 9214. Could someone please look at my code and help me understand why... my names channel to sample and rate update, until the next time I run my program.
For example: if I enter the name of the channel "ONE" and "10" sampling frequency... and draw my program will be executed using previous information entered by the user. If I press the race a second time, then it will use the '10' sample rate and channel "ONE". Everyone can't see what I did wrong? I know that my code is absent, but she does everything that I need, except for the update.
I really want to use a structure of the event, but failed miserably in my attempts. Thank you
Stream. Updates the values in your Subvi are run in parallel to the Structures of your event. The simple solution is to simply put your update of the values inside the event. In this way the controls are not read until you actually press the next button.
-
Address bar URL and FavIcon image do not update until the user clicks the Site identity button
I noticed that each time the Site identity button is gray (i.e. most of the time), when you navigate different pages on a web site, the address bar does not change and just continues to show the root of the domain, for example "eircom.net" when the actual URL can be 'http://entertainment.eircom.net/movies/'. the real URL is not revealed until I click on the Site identity button. I get a pop up of Firefox "this website does not provide identity information.
the URL of the previous page/site (and the image of the FavIcon) are left in place until I click on the button.Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
-
Hello
It might make me totally distracted, but in the password protocol, it seems all sites want one and then somehow I've now changed my passwords? IE: Google, Microsoft...
Some people say that I need only a pswd for all sites?
Some say all change every month... you, the experts say?
Thank you
Hello
One of the worst things you can do with passwords is to have the same password for everything. For example, someone like a hacker finds your password by e-mail. You can use the e-mail address as username for several things, such as the online stores, financial sites, etc.. Once they know this address combination and e-mail password works on a single site, hackers can try on many popular sites. You are then not only your email hacked, but a lot of things.
There are more tips here:
http://www.microsoft.com/en-GB/security/online-privacy/passwords-create.aspx .
-
I'm on Acrobat 10 for mac and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciate any help!
Do not use the feature distribute the form. Instead of this, just put up a button "submit" and configure it to send email using any email address you want. Just add a button and set the action of the mouse upward on "Submit a form" and use a type mailto URL and specify that you want to send the full PDF. Then activate the reader of the document: where "Advanced/extended features in Adobe Reader" is located in Acrobat XI?
If you really want to use distribute the form for some reason, change the e-mail address in your preferences: Edit > Preferences > identity > Email address
-
I'm trying to connect my internet to my laptop but its does not work (it is a new connection). I tried it on my other laptop and password have crossed (the computer on which he worked on had vista). In addition, he worked with other computers in the House. I get a message of identity validation and then it is not connect?
original title: internet connection failureHello
Do you mean that you try to connect the wireless access point? Try to install Service pack 3. Also what you can check:
Click Start-> settings-> network-> right click on your adapter connection-> properties-wireless => select Wireless (tab)-> select your (name) wireless access point->, then select properties-> click on authentication-> uncheck the "802.1 x authentication for this network" click ok on all screens.Restart your computer and try to reconnect.
I hope this helps.
-
I watch a movie, and then after 10 minutes or if the video is empty.
I watch a movie, and then after 10 minutes or if the video is empty. How can I continue to see the video until it's over?
I watch a movie, and then after 10 minutes or if the video is empty. How can I continue to see the video until it's over?
Watch a movie about what?
In other words - you look a the Internet via Netflix movie streaming? A video streaming via Hulu? A video that is saved on your hard drive? A video that is stored on a shared network is accessible on your local network? What is a DVD? BluRay? He plays using SilverLight? Adobe Flash Player? QuickTime? RealPlayer? Or something more local like WIndows Media Player or VLC? Something else?
I would like to say - in general...
(1) uninstall all of the aforementioned Internet plugins. Reset. Download and install the latest versions (Adobe Flash Player, Microsoft SilverLight, Apple QuickTime, or RealPlayer). Reset. Try again.
2) update your video card/device driver from the manufacturers of video cards and devices web page. (You probably have a nVidia or ATI/AMD video card processor).
(3) check the settings of your screensaver and Hibernate...
-
original title: quick search
When I enter an apostrophe when online, it still shows the quick search box, and then I can not type more
Hello
1. it occurs when you use a particular application or all applications?
2 have you tried to use a different keyboard?
Method 1.
Check what happens when you use the on-screen keyboard. If it works fine here so you can check using another keyboard.Method 2.
If the problem persists using a keyboard screen ion then run the sfc scan and check.
Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.
To do this, follow these steps:
a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
b. type the following command and press ENTER:
sfc/scannow
The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
More information on SFC scan found in this document:
http://support.Microsoft.com/kb/929833I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Windows startup is not full, and then after a few seconds that the starting ends.
windows startup is not full, and then after a few seconds that the starting ends.
Original title: boot of win7
Yes, it's the way it happens. All the other stuff are load - computer office, drivers, anti-virus, etc.
It takes longer is that you have a lot of programs that load with Windows.
and is faster if you have Windows on a SSD instead of a disk hard standard tray.
Win7 also much faster than XP load, anything. -
My windows 7 for installshield install & uninstall all of a sudden is in Chinese language, not English. How can I fix it? Some suggest that I change the installshield implemented the language. How to do that if in fact this is the preoblem?
Hello
I suggest you to see link and check if it helps.
http://blogs.msdn.com/b/tilovell/archive/2010/06/13/InstallShield-in-the-wrong-language.aspx
.
For your reference: Add or change an input language: http://windows.microsoft.com/en-US/windows7/Add-or-change-an-input-language
Hope this information is useful.
-
When I use my clipping on an image mask, fills the form I use the whole layer instead of just being a small shape Panel and then I put my picture on the shape layer, a clipping mask, but the form becomes clear with just a slight edge. The photo behind it does not move. I did this project of class before and it worked fine so I'm not sure if I have something started or... Any thoughts?
I thought about it. That's all just stupid on my part and a bit of frustration because photoshop is my sworn enemy of then adobe added in. Thanks tho!
-
Lightroom displays all images from a folder - it displays the message '45 65 images, selected 45' and 45 messages do not appear in the grid of the library, but I can't see the remaining images of 20. All filters are disabled...
Hello
Please go to the library Module, then click on the picture in the Menu bar and then click the stacking.
From there please select expand all stack them.
It should show all the images if they are virtual copies.
Kind regards
Tanuj
Maybe you are looking for
-
command prompt in the start menu goes directly to the control box black small and not big box
Page product HP supposed to go to the start menu and type command prompt and choose Run as administrator. There was a break in the screen of the typical white box with blue borders with a list of options. I typed in it and click on command prompt an
-
XBox 360 will not connect to the secure WRT54GS network.
Have you tried the suggestions we found in the forums for the connection manually and we continue getting a connection error. We rebooted the modem and the router as well, and the XBox 360 do not always connect. Any ideas how to make so that it can c
-
Hello I was wondering if there is possibility to set the resolution to display for all connections to, say 95% of the screen? the goal is that the user can see the local taskbar under its connection to the Virtual Office at any workstation. So, it wo
-
HOW CAN I SIGN UP FOR A SIGNATURE ON A PDF DOCUMENT AND WHICH DEVICE DO I NEED
I have a PDF document, I'm supposed to put my signature on and return electronically to someone, but find it difficult. I just want to know how I can do and what camera do I need to have. light pen, pen or what?
-
I use Neat Desk scanner, it allows to save the scanned PDF paper, I used to be able to open the file once it has been analysed and selected record as the reduction in the size, is more, I don't have or see this option.Would like to know that I still