Wireless home

Similar Questions

• Toshiba AT200 refuses to acknowledge my connection wireless home

  My AT200 refuses to acknowledge my connection wireless home.
  1st time, that he could not recognize, I restarted the broadband system and then recognized.

  Now he just continues to scan and will not find the connection?
  I tried to manually force but he said that it is not in the range - even when I'm standing right next to the box.

  This is a major issue - what is a Tablet without wifi connection - right?

  > Is there a way to reset to the factory settings?
  To reset to factory settings Android, go to:
  Apps-> settings-> privacy-> data reset > reset compressed-> clear all

• why I can't connect samsung galaxy s 3 to my wireless home connection

  Nice day

  Hello
  1. what happens when you try to connect?
  2 - is the wireless connection works fine?
  If the problem is specific to the Samsung Galaxy phone connection, I suggest you to contact the manufacturer for assistance on this issue.
  Support
  http://www.Samsung.com/us/support/
  See also:
  5 steps: how to set up your network wireless home
  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx#fBid=QrmrthWykWS

  Start Galaxy S III Guide

  http://www.Samsung.com/us/article/Galaxy-s-III-Starter-Guide

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

• can receive bur can't send emails on my laptop wireless home network

  When connected to my work network or to use the iphone as a modem I can send/receive emails. When connected to wireless home I can receive but not send.

  When I do a self-diagnosis, it says THE LAN is not connected. Also I can send/receive my gmail account but not my business account?

  Any ideas?

  Hello

  ·        What operating system is installed on your computer?

  ·        What service provider or email client do you use to access the e-mail?

  ·        Are you connected to any server?

  If you use Hotmail, then post your query to the following forum:

  http://windowslivehelp.com/product.aspx?ProductID=1

  Reference: http://windowslivehelp.com/

• I have a computer 2 wireless home phone network, only administrator there?

  I have a wireless home network and I got a connected laptop. I added another one last week and I don't have administrator rights. I have no firewall or virus. I just want to know how to give the two pcs of admin rights so I can update my other laptop. We have administrator and the other not.

  I have a wireless home network and I got a connected laptop. I added another one last week and I don't have administrator rights. I have no firewall or virus because I can't access administrator? the two laptops running xp and are dells and both are connected to a router belkin on suddenlink cable. How to give administrative rights for both computers?

  It is quite easy to stop the menu "Select the hardware profile" to appear... Once you get connected to Windows.  Your post is not clear is whether or not you can do.

  What do you mean by "the other login page. the only user I know is the lowest user in the book?

  What version of Windows XP is on each computer (Home, Pro, Media Center)?  If you can connect to Windows, made a click right my computer and select Properties.  Also a report of the service pack.

  If you use the built-in account named 'Administrator' for daily use and connect your computers between them and the Internet "without protection of firewall or a virus", you should probably do a clean install of Windows on both computers.

  If you have important data on computers it back up to an external drive and scan with good antivirus and anti-malware applications before copying this back on your computers (after install it clean).

  Contact Dell for instructions on reinstalling Windows.

• My wireless home does not appear on as a network available on my work laptop and always did before.

  My wireless home does not appear on as a network available on my work laptop and always did before.  He brings up and connect on my laptop. I have a Linksys broadband router - summer use it for at least two years with no problems until this.  I know that my wireless works on my laptop because there is an unsecured network listed in the available window.

  A really strange thing that happened two weeks ago (and I don't know if it's related) was my personal laptop was fine during several hours - then he kept abandonment of the internet connection.  I couldn't keep him connected - reboot etc didn't work.  I've not logged again until today - and that's what I use now.  He connected very well today.

  My work laptop had been connected to my wireless ealier in the week, but when I tried to connect as usual Thursday night he has not logged automatically as it has always done in the past.  Nothing has changed.  Security patches that my company had sent through this week have not downloaded until after that I tried to connect and couldn't.  There is nothing new - he had no reason to think I should not have automatically connected as I have in the past.

  Hi suemoo,
   
  -What version of service pack of Windows XP you are using?
   
  This problem occurs because the media connect action is not sent to the wireless service correctly.
   
  Method 1: Disable and then enable the wireless network adapter and check if it helps fix the problem.
  To do this, follow these steps:
  a. start the network connections tool in Control Panel. Click Start, click Control Panel, click on network connections and Internetand then click on network connections.

  b. right click on wireless network connectionand then click disable.

  c. right click on wireless network connectionand then click enable.

  Method 2: Try the methods listed in the following article and check, if it helps in fixing the issue:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

• Add Windows XP to a wireless home network

  Hi just to add a lapttop XP to a wireless home network. the network icons are shown as they are always posted on vista and windows 7 and is there a centre network for xp

  so do not know if the connection is correct. In addition, the Dungeon of connection keep out and reconnect. any help please

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi Vanchoch,

  Please visit the following link for instructions on how to connect a Windows XP-based computer to a wireless network:
  http://www.Microsoft.com/windowsxp/using/networking/setup/wireless.mspx#4
  With regard to the abandonment of the connection, I highly recommend download the latest drivers for your wireless network card. If you can get me the model number and the company that makes it, I can normally provide you with a link to the driver.
  In the meantime, the following link can provide some advice on troubleshooting for your connection:
  http://support.Microsoft.com/kb/870702
  Please let me know if I can be of further assistance!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Once I open my network connections, he says: I connect to my wireless home, but my internet task bar continues to indicate that I am not connected.

  Once I open my network connections, he says: I connect to my wireless home, but my internet task bar continues to indicate that I am not connected. Is there a way to get to show him that I am connected?

  original title: my computer says that I am not connected to the internet when I am.

  Another solution: Red connection system icon even though I am connected... X

  "Try this. It worked for me.

  I finally removed my network security and the State of the network now shows me as connected. The Red Cross has disappeared. It seems that Windows 7 does not support WPA2-PSK. I can't imagine that's the case. Any ideas as to why, as it is installed on my PC, is an option for WPA2-PSK? As I said, the material is supported and worked with XP. »

  ...

  And another... where the problem was related to the third-party software:

  "I found a solution. I had recently updated my GOAL to the latest version and it is incompatible with the new vista. It seems to be a small bug in the operating system. How I solved it is uninstall AIM and the other program "Viewfinder" or something like that...
  After that I uninstalled both of these programs, the Red Cross had disappeared and I had no network problem either. I now use trillian and I have no problem. I hope this helps! »

• With the help of Compaq SR5214X on wireless home network

  I have a Compaq SR5214X desktop PC I want to connect to my home wireless network.  What to I need to buy for this?

  Hello:

  Here is an article from Microsoft which should provide the information you need to set your PC to a wireless home network.  Basically, you will need to purchase a PCI internal or external USB wireless adapter for your desktop PC.

  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

  Paul

• establishment of a network wireless home

  That's what I have:

  -2 laptops from toshiba with wireless cards
  -a point of access to toshiba
  -two of them are connected to the internet (dsl) via the wireless access point

  That's what I want to do:

  -share files between two laptops

  What should I do?

  -tom

  Hello

  There may be different ways to solve this problem.
  What I did at home was to
  (1) establish a working group name - for example the House. Fix all units you home to this working group.
  (2) on a machines to share a folder with read-only access (there is a guide in WinXP that will show you how do it.) You can start it if you unroll the contextmenu of the folder you want to share).
  (3) set computer names that are human. Windows normally gives really strange names, but if you have 1 Toshiba Satellite P20 and Toshiba Tecra M1 1 I give the P20 "P20" name and the idea also for the M1 "M1". Or if you use only the P20 and Uncle Bob the M1, culd you name your machine 'My computer' and the machine of Uncle Bob "Bob."
  4) both units will have to be restarted if their names and / or working groups are changed.
  (5) in the address bar of the browser, type the address of the other machine (the one that has the folder that you want to watch). For example:
  \\M1\ (press ENTER after the last------)
  You should be able to see any file or the other that the other machine.

  Tip: If you have problems see each other, make sure that you're both on the same net. I have problems of hade with that and not understood why we cannot see all the units in my house until I discovered that a neighbourgh also have a wireless connected to my missing unit.

  Hope this helps you.

  BR

  Tom

• Best settings for a wireless home network?

  I want to get help on a somewhat complicated setup: my connection in optical fiber gets into my house to a room in the basement. I have a last generation Asus router, which spreads the signal through various Ethernet cables. Wi - fi is disabled, because it wouldn't reach anywhere. Upstairs, I have a new airport time capsule, which creates the main WiFi network for the home. However, it dose not brought into the world. In the box where I want to extend the signal, I have a 5th generation AirPort Extreme (it does not support the alternative signal) connected to an Ethernet jack.

  Now my questions:

  1. my Time Capsule should be set to bridge mode, because it is connected to a router? Do not forget that I can't exclude this router because it brings the signal via a cable to other places.

  2. If the answer to the above is Yes, is there a way to establish a network of wi - fi comments?

  3. What are the best settings for the Airport Extreme, which is supposed to extend the signal? It is better to create a new wifi network, as it is connected via Ethernet, or should I put it to extend an existing wifi network?

  I hope that I have explained clearly, I'm only half of technology warned, and I am a bit lost...

  1. my Time Capsule should be set to bridge mode, because it is connected to a router? Do not forget that I can't exclude this router because it brings the signal via a cable to other places.

  Own configuration of Apple software, AirPort utility you should implement in Bridge Mode time Capsule to avoid a network error called Double NAT. But, ironically, if you call Apple support, they will tell you 'ignore' the Double NAT error and run time Capsule as another router on the network.

  Normally, you can avoid having a Double NAT error on the network, because that might lead to other problems, Apple boards so... If you call them... is controversial. Basically, it seems that Apple wants a router from Apple in charge of both the network possible... not another router.

  So, you will need to decide what advice to Apple you want to try.

  2. If the answer to the above is Yes, is there a way to establish a network of wi - fi comments?

  The feedback network option will not work correctly if the Capsule is configured in Bridge Mode.

  3. What are the best settings for the Airport Extreme, which is supposed to extend the signal? It is better to create a new wifi network, as it is connected via Ethernet, or should I put it to extend an existing wifi network?

  "Extend a wireless network" is used only when the airport connects to another router from Apple using a Wi - Fi connection. Since you will use Ethernet to connect, you would use "create a wireless network" setting.

  But, you won't have to worry about this if you are using Apple Configuration "Wizard" to set up the AirPort Extreme... it automatically applies the correct settings.

• Problems connecting to a Satellite Pro 4600 for network wireless home

  Hello
  My computer has a processor Athlon 64 x 2 4200 + and 2 GB of RAM, with XP2 Pro. I have a Linksys WRT54GS broadband router and connected with Virgin Media.

  My daughter gave me an old laptop a Satellite Pro 4600 with a 747 MHz Celeron processor, 384 MB of RAM and XP2 Pro has an Intel Pro/100 VE Network adapter. I set up a Linksys Wireless - G Notebook Adapter with SRX (model No. WPC45GX), so that I could use around the House. However when I try to connect to the home network, although he "finds" a list of networks, I am unable to connect and get an error message - "Windows cannot connect to the selected network (my home network). The network can be is no longer in range. Please refresh the list of available
  networks and try again. »

  I tried to connect with laptop computer in the same room as the router, but get the same message. In the Manager of peripheral devices, network cards, the two are shown and both work properly, but in the taskbar there is a red cross shown on the two icons, they say that a network cable is unplugged, but I don't have a cable network.
  The other tells me that the wireless is not connected.

  I presume that the adapter works as it can 'see' wireless networks, I used Lynksys support to verify that all router and adapter settings are correct.
  My wife has a new laptop and is able to connect to the home network with no problems.

  Please can someone offer advice or assistance.

  GMC

  for some reason, you need to turn off your wired connection (cable) and use the client of the PCMCIA wireless network card. Maybe just the problem that your system can not separate the two network connections and gets an error it s. You should also visit the site Web of Linksys and download the latest driver and the customer for the card, so you can make sure that the software is up to date.

  Another good idea would be to visit www.microsoft.com and the support center for any 'knowledge base documents' which could probably solve the problem.
  As your machine is really old and no one is using PCMCIA cards more, you may wait a long time for an answer in this forum. Maybe you should check the site from linksys for a support section. Maybe they could help you...

  Welcome them

• Satellite A100 with Vista: Canoe connect to wireless home network

  I am owner of computer laptop satellite A100 and on the Microsoft Vista operating system.
  I have a problem to connect to my home wireless network.
  When I try to connect to my wireless connection, Vista reports that it can not be connected for an unknown reason.

  I use the D-Link Access Point and I connected with my HP lap top very well.

  Can anyone help?

  Hello

  Believe me it's not easy to say why you are not able to connect to the WLan.
  I think that all options must be checked by steps.

  First of all I recommend you disable encryption of WLan. Also, turn off the firewall on the laptop settings.
  If the laptop connects successfully to the WLan you can turn everything back.

  I also found this Toshiba document on the activation of a connection to a WLAN network that is not broadcasting the SSID in Windows Vista
  http://support.toshiba-tro.de/KB0/TSB7101OC0007R01.htm

  Check it!

• Persistent problems with wireless home network

  Hi, the problem started two weeks or more ago, when after the connection to the internet easily using our wireless network connection, my computer began to say that our domestic network was unidentified, then studied by troubleshooting my self but do not really understand the information the computer indicated to me. As it was a problem of the internet I contacted our local provider broadband, they looked like the line and the service was absolutely perfect and to confirm this router computer of my father in the same cable network has internet connection easily as it was my mom who was using the connection via the same router wireless cell phone.
  Following the instructions of technitians I have tried to manually enter internet addresses to see if that would help the internet connection, it did. So I thought that the problem has been resolved. I had the use of the internet that day and everything was fine until I restarted the next morning. The problem reappeared. So I called my internet provider again, this time I'm sorry to say to a girl rather too quickly diagnosed that I had a virus to uninstall Google chrome and reinstall a different browser... That didn't make sense to me, but I tried some sort.  So I moved my office tower and all the bits in one place in the House were we could conect it to the router with an ethernet cable followed his instructions then moved the computer to its original position but still no internet connection and still this problem 'identification '. I turned off the machine and tried again the next day. Start by running the troubleshooting of network problems, this time I looked at the detailed report which curiously stated that the computer had difficulty oscillating between two somethings (sorry don't remember the detail correctly is days ago)
  So I called my internet provider again and I am a helpful young man, read him the information and examined the reports that they had written about the problem in the days preceding. I followed his instructions looked in the network sharing Center, settings changed and added in manual codes for the internet, turn off the router for 10 seconds or more and then restarted, this time with not even a temporary success. We tried a few things but I always got the same contradictory message in the dialog box in the lower right corner, where it showed I was connected to the local network not connected to the internet, when I opened the network sharing Center from the local network to the router would show that 'Identification' and the conection to the internet would be marked with a cross. I managed to pass my network profile is for some reason any defined to the public rather that home and we were able to change it (even if it wasn't easy)
  So I was told it was probably a driver issue, I was told I might need check the updates of my license on this operation the technitian and I also saw the site of netgear, that there was a potential conflict between Kaspersky and the netgear driver, so I need to uninstall my Kaspersky anti-virus stuff and the old pilot , down load and install the new drivers and then reinstall kaspersky. I followed it. (Movement of the tower and all the bits in place in the House were the ethernet cable was available).  I found an updated driver, uninstalled downloaded kaspersky and run only the driver installed Kaspersky again. Everything seemed to go well and I even plugged in the wireless adapter connected to the internet through that and disconnected the cable... things were going well.
  So I turned off the machine and carried over into my room where I turned on once again. The problem reoccured. I thought it was time to communicate with kaspersky. So I turned the computer off and reduced to the ethernet cable. Connected a Kaspersky contacted by e-mail, they were quick and I was asked to run a program that logeed my information system. I did this and I told them I thought it might be a conflict between the driver and their softwear, they have looked into it, asking me to run a misuse of this program and the results by e-mail. Once again, I've followed the instructions and took notes, but no problem was found. They showed me how to configure my kaspersky firewall to allow access to the networks. It's when I was doing that I noticed that the computer had five ads of our home network, so I put all the profiles of their trust, apply changes and tested to see if it would work. On the wireless internet in the office where the ethernet cable and a router are by train, it's good, it works. I connected the wireless network and disonnect the ethernet then on the internet and there is no break in service. But if I shut down the computer and set up in my room at 12 meters, it won't work with signal strong (4 / 5 bars are green).

  This morning I watched the windows firewall settings and changed some of them to see if that makes a difference. but none.

  I'm trying hard to think about this problem but I'm getting nowhere fast, I know just enough. I just tried pluging in the wireless network adapter again, but there is no wireless network connection now and no internet connection:

  After having tried downlaoding a new driver and this has not fixed the problem after having only tested the wireless signal is strong enough for good internet connection to my mother's computer in my room, I'm stuck. I looked on the netgear site and follow their advice, but it's really a night Mare!
  I also noticed that somehow, we put in place five versions of our home network, I wonder if there is some confusion computer... I looked into the idea of the removal of the networks, and it seems that you can not do. I am trying to back up my files, uninstall everything and re - build my computer from scratch. If there is something else I should try before taking this message please drastic measures me ASAP.

  Hello

  1. What is the operating system installed on your computer?

  Please follow the steps from the link below.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• After traveling with my laptop, I am unable to connect with my connection wireless home

  After traveling with my laptop, I am unable to connect with my connection Wireless at home.  What I am doing wrong?

  Hello

  ·         What operating system do you use?

  ·         You are able to connect through wired network?

  .         You get the error message?

  Follow the steps in troubleshooting from the link and check if that helps:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If you use follow Windows XP KB article troubleshooting steps and check if it helps:

  How to troubleshoot wireless network connections in Windows XP

  http://support.Microsoft.com/kb/870702

  See also:

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Identify and resolve home network problems

  http://Windows.Microsoft.com/en-us/Windows7/identify-and-resolve-home-network-problems

• How can house proplem wireless - I disable my wireless home Internet password

  How can I disable my home wireless internet password so I can use devices randomly like an ipod or another laptop without having to enter the password every time

  Hello Tracy,.

  Who is the manufacturer of the router?

  I suggest you to disable encryption on the router protocols and open. This will allow you to connect to the network without entering the password.

  However, the network will be open to all and anyone within range can access the network and logon itself and use resources.

  You can see the manual of the router to access the settings.

  Note: We do not recommend using type network open (with no security) because it can lead to multiple problems, including infections, violation of security etc.

  Hope the helps of information.

  Please post back and we do know.