After traveling with my laptop, I am unable to connect with my connection wireless home

Similar Questions

• Unable to connect wireless DNS server is not recognized.

  My laptop won't connect wireless does not have the DNS server has never had a problem before

  Hi Roger,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the issue you are unable to connect wirelessly because there do not recognize the DNS server. The problem may be caused, if there is a miss match the IP address configuration. Then, I suggest you to try the steps below and see if it helps you to solve the problem.

  Method 1

  Automated convenience store is a tool that can find and automatically fix problems with your computer. These utilities are not designed to solve all the problems, but they are useful to try because they can often save your time and efforts.

  Run the network troubleshooter utility:

  Method 2

  If the problem persists, I suggest you to release and renew the IP address. For this you can see the steps below.

  1. Go to Start, click all programs and open the Accessories.

  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.

  3. In the command prompt, type the following command and press ENTER:
     enough ipconfig and press ENTER.

  4. Then type ipconfig / renew and press ENTER.

  5. Type Exit and press ENTER.

  Method 3

  If the problem persists, try to reset the TCP/IP stack and see if it helps you to solve the problem. To reset TCP/IP, you can refer to the procedure described in the article mentioned below. If fixit does not help, try to follow the manual steps.

  How to reset TCP/IP using the NetShell utility

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Get unable to connect wireless suddenly

  I have a Pavilion dm4-2165dx with Windows 7 64 bit.  I did not any changes to the laptop or the network.  All of a sudden today I couldn't connect to my connection wireless home eventhough that all other machines at home can always connect without problem.

  My wireless connection is turned on and it is blue.

  I can't conect to internet via ethernet plugged into my router.

  I tried all the trouble shooters.

  I tried a windows rear roller and that no longer works.

  Wireless drivers that are listed in Device Manager are:

  Intel(r) Wifi Link 1000 BGN 14.1.1.3

  Microsoft Virtual Wifi Miniport adapt 6.1.7600.16385

  Microsoft Virtual Wifi Miniport adapt 2 6.1.7600.16385

  Thanks in advance for any help you can give me.

  The solution to my problem was to reset my router.  At first I didn't think it was the right solution, because all my other devices still could not connect to the router wirelessly without problem.

  Thanks for all your help.  I really enjoyed.

• Suddenly can't get on net with firefox, even after as re - download after progress in Explorer... says 'unable to connect '.

  I have always used Firefox. Today, it was impossible to connect. Restarted my computer AND the modem/router. Another computer on the network CAN focus on Firefox. I can devote himself to explore. When I try Firefox window comes up with "unable to connect...". Firefox can't establish a connection to the server www.bing.com"(or any other URL).

  Problem started after you update Firefox? Your firewall may not recognize the new version of Firefox and won't allow access to the internet.

  • See-> https://support.mozilla.com/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• I am unable to connect wirelessly with my new laptop. He always tells me to try to reset the router, but it does not work.

  original title: I'm unable to connect my new laptop...

  I'm unable to connect my new laptop which has a 802.11n modem to my router Linksys 2.4 GHz 802.11 g wireless. Try troubleshooting and it tells me to reset the router. Help...

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

• Laptop HP 15: unable to connect to the Windows store for updates

  Setting up the new HP 15 laptop.  You seem very well online.  Icon says I'm connected to home WiFi.  But when I try to access the "shop", I said that I am not connected to the internet.  What Miss me?  I don't know what else to say.

  Hi there @ElliottO

  Welcome to the Forums of HP Support!

  I understand that you get an error message when you try to connect to the Windows store. You have problems with other Web pages having the same error, or are you able to navigate normally?

  With a bit of checking, it seems that it's an unusual problem, but there are several causes. Here are a few pages of various related forums that can help:

  Store Windows 8.1 does not connect to Internet - eightforums.com

  problem with connection/app store - eightforums.com

  Unable to connect to the Windows store (Windows, 8.1, 8, RT and Pro) -technet.com

  I can't access the store of Windows 8 -answers.microsoft.com

  hope something is useful for you.

• Unable to connect wireless to the Internet - Atheros - HP Pavilion dm3-1035dx

  Hello

  Laptop: HP Pavilion dm3-1035dx

  I just formatted the computer and the software has been reinstalled. I have the latest Atheros on the Site of HP drivers.

  I'm unable to connect to wireless internet, despite what I do. I will try to connect to a network, and it will then show with the little yellow Triangle showing limited access.

  Troubleshooting of the shows "wireless network connection is not a valid IP configuration [not not fixed]" and "[detected] problem with wireless adapter or access point.

  The wireless router is 2.4 GHz (B + G). Security is WPA2 (AES).

  Once I have disable the security for the wireless router I am able to connect to the internet. However, once I got change back to WPA2 (AES) I can no longer connect.

  I have crossed the wires and haven't found a working solution. If I could get help that would be greatly appreciated, thanks.

  Fixed a problem.

  Don't know what he did but the wireless connection is working now.

  I turned off my windows firewall. I disabled the router security and was able to connect to the internet.

  Then back to WPA2, the connection has failed.

  I tried ipconfig / renew ipconfig/release in commmand invites a few times and ipconfig/release would not work ("..") Unable to contact your dhcp server...). However, after several attempts more to play, I was able to connect wirelessly with WPA2 and windows firewall on.

  Ipconfig displays now, 192.168.0.1 and not 169.254.61.203

  Please help us Erico

• After upgrading to 7.6.100.0 user cannot connect wireless

  We have a 5508 internal controller that has two SSID on it.  A SSID secured which uses an ACS server to authenticate users through AD and a guest SSID on the tunnels to an anchor DMZ 5508 controller.  Guest users have no problems.  We have improved our controllers to 7.6.100.0 about 3 weeks ago.  Since then, we have had a problem with the path of data, as the controller of the anchor is down and came only after the internal controller is restarted.  It was the 1st issue.  In recent days, I had users from across the country say that they are unable to connect to our secure network.  All users have Win7 machines.  All they see is the sign of performance of yell, on their Wi - Fi connection.  In the network and sharing Center, they see the wireless network, listed as an unidentified network (public network).  GBA, users are authenticate with no problem (I can see it in the journals of the ACS), and they receive an IP address.  However, they have absolutely no connectivity.  I have them try to ping the default gateway, subnet on which they are assigned, and he returned with the request timed out.  Of course, they are unable to access internet, or anything, because they have no connectivity to their front door.  I restarted the internal controller (thinking that there must be a deadlock, as the anchor of path of data issue) that did not work, I have blown away the SSID and recreated.  That did not work.  I even restarted the ACS, although it was not a problem.  It seems that all users who are connected before the show and have no stop of their PCs, are ok.  Users who have closed or withdrew their computer, secure wireless network profile, can no longer connect.  They get just that the network is not identified.  I do know that if there was any sort of update Win7, or some other grow, but I assure you that from the point of view WLC, no problem.  Thanks for any help!

  There is an open with v7.6 and of 3600 and 3700's question.  Users are in the executing State, but they lose the layer 2 connectivity.  Ther will soon be a patch out of the public for issues with the 3700's, which affects customers who are on the 5 ghz only.  With the 3600 problem seems to be with 5 GHz and 2.4 ghz but with 802.11n not customers.  It is what I tested and what Cisco has been able to replicate.  If you do not need to be on v7.6, unless you have the 3700's, I suggest you go to v7.4.121.0 or v7.5, if you need help for the 3600 module 802.11ac.

  Thank you

  Scott

  Help others using the system of rating and marking answers questions like "answered."

• Unable to connect to home WiFi

  Hello. Using a 2012 MacBook Pro runs El Capitan 10.11.4 and unable to connect to Wi Fi home exclusively. We had to Time Warner to get out. They gave us a new modem/router and update the connections/splitter in the basement. All our devices but my laptop can connect to the network. Our iPhones, light fires and Mac Book of wife anything can connect. The mine detects the network but cannot connect. However, I can connect my computer to other networks through my Verizon Wireless hot spot and even a 4 G LTE Kajeet hotspot unit I borrowed from the library. Any ideas what could be going wrong? I ran Wireless Diagnostics and nothing turns upward. The most frustrating part id my computer "thinks" it is online, because the Wifi symbol is obscured. But I'm not connected.

  Thank you.

  Processor: 2.3 GHz. Intel core i7.

  Memory: 4 GB, 1600 MHz, DDR3

  If you run any utility, including but not limited to clean my Mac Mac Keeper, Little Snitch, Wireshark, firewalls, etc. you must remove according to developers on their Web sites. Simply by dragging to the trash uninstall these and not help. Also any Mac antivirus application should be withdrawn from the system according to developers, even slide into the basket is ineffective.

  Once this is done, see this article

  Recommended settings for the WiFi routers and access points - Apple supported

• Unable to connect wireless on Satellite L300D-13 s

  Bought this new laptop Satellite L300D-13 s
  The wireless doesn't seem to work, are the switch and the light and the device manager says theres nothing wrong with my hub driver seems to work very well with my laptop more old etc so I think as my hubs ok. Is it a commen problem?

  Its a BT home Hub so this is useful and if I use the cable between the hub and the laptop it works very well and connects to the top with a problem, please help

  Hello

  The laptop supports Realtek 802.11 wireless network card b/g, but it has not been equipped with BT module.
  So if you want to connect wireless you must first activate the WLan on your laptop computer (WLan switch on IT and FN + F8).
  Then it must be set up correctly using the right SSID, wireless encryption, Mac address, etc.
  Also make sure that your router supports standard WLan even as the WLan card.

  Welcome them

• Unable to connect wireless, error - could not connect to the internet

  Original Title - connect wirerlessly

  I can't connect to the internet via my wireless router? When I check the availability of networks, the signal is as strong as it gets. However, as soon as I log in, the force goes to far and he says: "Unable to connect to the internet" the distance between the router and (computer) is from 25' to 30'. Any help be greatly appreciated. Thanks in advance

  Hello

  As a first step put the computer near the router and start with the security off the coast.
  When it works, take it back to the final spot. If it stops then working, then you have a problem of distance.

  In general

  My wireless is not working - http://www.ezlan.net/wireless.html

  Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

  Wireless Security - http://www.ezlan.net/Wireless_Security.html

  Extending remote - http://www.ezlan.net/Distance.html

  Wireless modes - http://www.ezlan.net/Wireless_Modes.html

  Wireless bridging - http://www.ezlan.net/bridging.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Unable to connect wireless even though we have the right key wireless.

  Wireless

  We have an acer one happy and we can connect to the internet by cable, but although we have to correct wireless code, we can not connect to wireless. Our other laptop works fine with the same code. Please can you help me?

  Hello

  1 did you change on your computer before this problem?

  2. you receive an error message?

  3. what exactly happens when you try to connect wirelessly?

  Follow the suggestions and check if that helps.

  Method 1

  You can update the latest wireless adapters.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2

  You can follow the procedure under article

  Problems in Windows http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows?T1=tab04 see also wireless and wired network connection: solve problems, find http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-finding-wireless-networks wireless networks

• Unable to connect wireless integrated Touchsmart IQ506 to Netgear's WNHDE111 Wireless - N Access Point

  I have a new HP Touchsmart IQ506 and the experience has been very positive with one exception: the Wireless-N networks.

  I bought a Netgear Wireless-N reduction kit.  I am able to see (in the Vista network and sharing Center and available networks), using the Netgear Wireless-N USB adapter Netgear WNHDE111 Wireless-N access point provided with the Touchsmart IQ506 and connect to it without problem.  But I am unable to connect directly to WNHDE111 with Wireless-N adapter integrated the IQ506 (on the HP Touchsmart IQ506 or on another PC with the Wireless-N support, a Sony Vaio NS150 computer).

  Ralink 802.11n adapter indicates that "working properly" in the Device Manager.

  Am I missing something?  Are there instructions on how to connect the IQ506 up to an access point Wireless N with the built-in wireless adapter?

  
  

• Unable to connect to home wifi on windows 8 on dell inspiron1525

  On my Dell inspiron 1525, I updated to windows 8 but could not connect to a Wifi hotspot that is specific to my home which I already use wifi for my smartphone and the tablet. Find me a solution because troubleshooting is not fixated.
  It was long and I was tired of trying everything... that I connected to another wifi also and used very well... but not a connect to the home.

  On my Dell inspiron 1525, I updated to windows 8 but could not connect to a Wifi hotspot that is specific to my home which I already use wifi for my smartphone and the tablet. Find me a solution because troubleshooting is not fixated.
  It was long and I was tired of trying everything... that I connected to another wifi also and used very well... but not a connect to the home.

  If you are unable to connect to a running network, you might have a problem with your network profile

  the network profile troublesome Deleter and read...

  How to remove
  http://www.eightforums.com/tutorials/20085-wireless-network-profile-delete-Windows-8-a.html

• Unable to connect wireless, "ACS user exceeded max sessions" users

  Some corporate users are unable to connect to the wireless company.

  On the WLC, I get the following logs:

  Authentication failure AAA for UserName:dto029 user Type: USER WLAN

  The GBA, I get the error:

  Authentic doesn't have a default group for ACS user exceeded max sessions (by default) 192.168.47.46 DTO029......

  That means "user ACS exceeded max Sessions? How can I solve this problem? Connection problem faces few users, while others are able to connect.

  Corporate SSID, Session Timeout & Client Exclusion is not enabled. The WLC version is 7.0.98.0 and the version of the CSA 4.2.0.124

  The problem is solved the ACS is restarted. Is there a permanent solution?

  Thanks in advance.

  Hello

  the error means that the users belong to the ACS Group (or the user themselves) has a "max session" setting, as described here:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/Overvw.html#wp826493

  .. and the user exceeds this limit.

  ACS can indeed limit the number of concurrent sessions for the same user name; This counter is based on the RADIUS account management information received from the AAA client: the session counter is increased when receiving a 'Start' accounting and it is decreased when you receive a "Stop" on accounting package.

  ACS for a reason if any don't receive an Acct-Stop, it won't reduce the number of session, so it may happen that your users exceed the max concurrent sessions allowed indeed.

  You can check the active sessions on the "users" ACS report:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/LgsRpts.html#wp680304

  If you restart ACS, this info is reset, so everything will work again, as you say; as an alternative, you can also use the options 'Purge logged in users' on the logged users page, but it would be wiser to really solve this problem by checking if... :

  -do you really need the config of max sessions? Otherwise, you can simply disable this on users/groups configuration

  -If you need for this limitation and the problem is related to the session that overlap, which means that the WLC should not send the Acct-Stop because there is always a session active and a new one is created at the same time, you can consider increasing the number of maximum session.

  HTH,

  Federico

  --

  If this answers your question please mark the question as "answered" and write it down, so other users can easily find it.