"Wireless LAN, Wi - Fi adapter media disconnected".

Similar Questions

• T42p 11 a/b/g Wireless LAN Mini PCI adapt disappeared

  T42p (2373HVU) running XP Pro SP3. Following a recent Microsoft XP OS automatic update, unit a/b/g 11 disappeared from the list of network card (No 802.11 wireless Radio device is displayed using Fn + F5, only the Bluetooth device is accessible).

  When I replaced this OS updated with the original OS comes with the T42p (Fortunately, I mirrored the original hard drive and kept as a spare) device 11 a/b/g is present and I am able to access the 802.11 standard using Fn + F5. Therefore, I believe that the wireless LAN card is OK. Something happened during the MS update that killed the 802.11 device.

  Interesting to note that in the device under other devices Manager, I have a controller Ethernet figure even if there is no other device other that the Intel PRO/1000 MT Mobile connection under the network cards, which proved to work correctly.

  Any help would be appreciated.

  Welcome to the forum!

  After you download the driver, you have run the Setup file of C > drivers > win > Wlanath?

• Can not find the updated driver for Intel PRO Wireless LAN 2100 3B for R40

  I can't find the good updated software listed for my R40 on the Lenovo site. The Device Manager shows my card wireless as:
  Intel PRO Wireless LAN 2100 3B Mini PCI Adapter but I can not find the model listed in the update list.

  My R40 description is by Lenovo site is:
  Product: ThinkPad R40 2897 B4U
  Operating system: Windows XP

  Original description: P M 1.4 GHz, 256 MB RAM, 40 GB 4200 RPM drive HARD, XGA(1024x768) 15 TFT LCD, 32 MB ATI Radeon 7500, 24x10x24x/8 x CD-RW/DVD, Intel 802. 11B wireless (MPCI), Modem (CDC), 10/100 Ethernet (LOM), UltraNav, Secure Chip (TCPA), IEEE 1394, 8-cell Li-ion, WinXP Pro

  Lenovo driver update page, I have the following choices:

  Network: R40, R40e wireless
  (1) mini PCI driver of cisco Wireless LAN

  (2) high rate Wireless LAN Mini-PCI Adapter III
  Note: The models ThinkPad R40 2681, 2682, 2683

  (3) dual-Band 802.11ab and 802.11abg wireless LAN Mini PCI adapt

  (4) Intel PRO/Wireless LAN 2100 3B Mini PCI adapt
  Note: The models ThinkPad R40 2722, 2724 only, 2723

  My card is listed for models 2722 2723 and 2724 ONLY.

  Here is the direct link to the driver page http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-46024R40.

  Device Manager shows that I currently have the Intel of the installed driver version: 07/03/2003, version 1.1.5.0

  Can anyone help on what version of the software update I should use?

  Welcome to the forum!

  Here is your wireless driver:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-59438

  After you download it, make sure you unpack it in the following directory: C > drivers > win > Wlanint

  I hope this helps.

• Wireless Internet does not work. I get the error: "no operations can be performed on the LAN with its media disconnected in CMD".

  Hello, I followed the steps in the previous thread... Thank you.

  Im getting the message "no operation can be performed on LAN with its media disconnected in CMD"... help.

  My wireless will open any Web pages, although it seems to be connected and trouble shooter saying "DNS does not.

  original title: "DNS does not.

  Hello

  1. don't you make changes on the computer before this problem?

  Step 1: Make sure that switch WLAN is not turned off. To do this, you may need to consult the manual of the computer.

  Step 2: Reset the TCP/IP and WINSOCK stack.

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, the following line, and then press ENTER:

  netsh winsock reset catalog

  netsh int ipv4 reset reset.log

  netsh int ipv6 reset reset.log

• In trying to retrieve the IP address, I get a message "connection to the Local Ethernet adapter, State media... network: media disconnected".

  Original title: connections to the LAN

  I can't establish an internet link. When I go to the command prompt to retrieve my IP address, I get a response stating, "ETHERNET ADAPTER LOCAL AREA CONNECTION: MEDIA STATE...". MEDIA DISCONNECTED. How would I fix this? Thanks for your help

  Hello

  Follow this procedure to ensure that the network the laptop is on and configured correctly.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Error problem USB wireless adapter "Wireless LAN adapt Wireless Network Connection 4:

  Hello

  I can't access the internet via a USB on my desktop PC wireless adapter. In fact, I received the following message:
  Wireless Network Connection 4 Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Double Belkin N + Wireless USB adapt
  Physical address.... : E8-5B-5B-49-DD-CD
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Please help me solve the problem.

  tanks

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I would like to ask you some questions, in order to better understand the issue.

  1. What is the exact model of the Belkin USB adapter?

  2. What is the brand and model of your computer?

  3. When was the last time it was working fine?

  4. Remember to proceed with software or hardware changes recently?

  This problem may occur if there is a conflict with a third-party software or due to an outdated driver, to diagnose this issue further and solve the problem, try the following methods.

  Method 1: Run the network troubleshooter

  I suggest you to run the network troubleshooter utility. It will automatically detect and solve the common problems that can cause problems with the network. To run this utility, you can follow the article below:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2: Network Wi - Fi problems and

  Follow the Microsoft article on wireless and wired network problems. Click on the link below:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information was useful. Do not respond with answers, because it will help us to find and provide you with a better resolution.

  Thank you

• Cannot start error code 10 messege on my wireless lan adapter

  I tried almost all day with no luck.  The computer is wireless, or at least it used to be. Now in Device Manager, I have the yellow exclamation on my wireless lan adapter.  I tried all the solutions proposed by the troubleshooting without result.  Cannot update the driver.  I get the messege that no updates are available, and cannot back the driver because there is nothing to restore.  Where can I download a wireless adapter lan 802. 11 b/g wn5301a?  All the sites that I find are the costs of unnecessary software prices.

  Hello

  Try a system restore before it happened.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ===============================================================

  If necessary:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Use a wired connection or download driver WiFi like below on another computer and transfer
  it to this computer on a removable media such as a CD, DVD or USB card or stick.

  Panel - device - network - WiFi note the check mark and all the info on the model Manager-
  Double-click - writing Drivers version tab - click the driver update (this can do nothing as)
  MS is far behind the certification of drivers) - then right click on the device - UNINSTALL - REBOOT -.
  This will refresh the driver stack.

  Go to system Maker and search for the WiFi Driver updated - download - SAVE - go where you put it.
  Top - right click RUN AS ADMIN - REBOOT

  Then go to the site of the manufacturer of the device and get even more recent (Realtek, Intel, or one that makes the device) and
  try to install again.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Wireless lan adapter

  Uninstalled by mistake wireless lan adapter. What can I do?

  Hello

  You are welcome

  No, you don't need to be connected to the internet.

  Kind regards

  DP - K

• Disabled wireless lan adapter. How can I solve it it?

  The laptop is a HP EliteBook 8440p running Windows 7 Professional Win7Pro.

  The HP Wireless Assistant has the following message: Wireless LAN adapter: this device is disabled in the Device Manager and cannot be activated from Deputy Wirelss.  It can still be disabled.

  I checked the Device Manager do not see where to put them on.

  There is a blue light on the top of the keyboard and on the front of the laptop.

  It is enabled in the bios.

  Trying to resintall the driver.

  The model of the wireless device # installed is:

  Intel model: 622anhmw

  SPS: + 572509-001 OB

  Any advice on how to proceed?  I hope that to avoid a complete resinstall.

  Hello:

  At this point, I have no idea except to say, for some reason, the map is dead, and that your laptop is still under warranty, so I would contact HP Support.

  Look in the wireless device and see if somehow the radio got turned off.

  Paul

• Problems with Realteck 8187 B wireless LAN adapter

  I am running Windows XP and since a month started having problems with my Wireless LAN connection. The installed adapter is a Realtek 8187 B. When I start the connection opens briefly, then begins to show the low connectivity with yellow dots under the icon on the status bar. Sometimes I have connection then connectivity closes its doors as soon as I pass my home page.

  Other times it falls back after about 5 minutes. I can usually clear it by restarting the computer sometimes twice. What I need to download an updated driver.

  Thanks in advance

  Jamie

  > Do I need to download an updated driver.
  I think you should check the portal Tosiba WLAN and install the latest version of the driver Windows XP Home edition. Do it first and check the functionality.

  Toshiba WLAN portal page is - http://aps2.toshiba-tro.de/wlan/

• M70 - 142:wireless - LAN doesn't work without AC ADAPTER.

  Hello
  My problem is a little trinkets.
  When my Toshiba works with AC ADAPTER and it uses wireless lan, network connection is very fast, good Internet downloads, but if I only use the battery, the transfer is very slow, internet pages download in a very long time and wireless network try blink icon rarely.
  So, to function normally again, I need to use AC ADAPTER again.
  I usually use a ZYXEL router for internet connection, I try with another without result and a different society also router. NOTHING
  Someone can help me.
  Thanx. Tony
  [email protected]

  Hi Tony,.

  I think that your problems are due to a utility that allows to get the maximum 'time place' battery of Toshiba power save. This is done by reducing power to some things that can drain the battery in their "full power" mode A common feature that most people notice, is that the screen is slightly lower under the power of the battery as the power supply. These energy savings are a feature and not a fault with the equipment, but the settings can be adjusted.

  Enter the menu in the Toshiba Utilities program start and open Power Options. You will notice that there are a number of profiles 'factory' that you can choose to give default settings for different configurations, including one for the battery power. All parameters can be set here.

  Once the settings have been changed, the wireless connection can run as fast as normal AC power, but the downside of this is that the battery may not last as long.

  I hope this helps, let us know how you go!

  Weezle

• Realtek rtl8188su wireless lan update 802.11n usb 2.0 network adapter

  Realtek rtl8188su wireless lan update 802.11n usb 2.0 network adapter. What are the problems he says. is it necessary?

  See my response to your previous thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/latest-niviidia-driver-update-windows-7-64-geforce/2f0effbe-634b-e011-8dfc-68b599b31bf5

• I have windows xp service pack 3. Driver 4.150.29.0 version broadcom 802.11 wireless lan adapter must be reinstalled.

  XP service Pack3, broadcom 802.11 wireless lan adapt 4.150.29.0 version needs to be reinstalled. The pilot had a mistake and while t/s one of the final solutions to try it was to uninstall the driver, then restart the computer. The pilot never reinstalled, same when I searched the Web for this with the installation wizard. Broadcom program still shows in the uninstall programs, but when I go into the Device Manager it shows device unknown, no driver installed. There is no option to roll back to a previous driver. I tried to do a system restore, and it doesn't work anymore. When I did a scan of the system with detective driver that he showed that no driver has been installed for her, but I do not have the cash flow when paying for this to have the wifi. I searched online and not able to find the driver I need on the Web site of microsoft or broadcoms. Don't know where to go from here, other that a cable ethernet... any help in getting this reinstalled driver would be greatly appreciated. Thank you!     If more details are needed let me know what you need to know.

  Hello

  I guess that you have a laptop, if your copy of Windows was preinstalled on it there is a big chance that the driver is built into your computer. To check, click Start > double click on C: > double-click the files to program files > (locate) double-click the folder of the cabins. From there, you can install your wireless driver.

  However, if the instructions above does not work, then download the driver from the website of the manufacturer of your computer, they should have ALL the drivers for your computer. :-)

• No puedo instalar hardware device VIA Networking Technologies Cardbus PCI Wireless LAN Adapter para W7, so alguien tiene driver is lo agradeceria

  No puedo instalar hardware device VIA Networking Technologies Cardbus PCI Wireless LAN Adapter para W7, so alguien tiene driver is lo agradeceria.

  El driver worked well with Windows XP, upgrade to pero al hacer a W7 me da problemas, visit el sitio oficial, pero no tienen el driver para Windows 7.

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:

  Please, select su idioma in her lista desplegable anterior to send you in el idioma of choice su pregunta. El foro Québec ha published're para frances only. If usted no encuentra el idioma no desee por encima of las options para support otros destinos international themselves can find following el siguiente enlace: (sp)

  http://support.Microsoft.com/common/international.aspx

• No driver for Atheros AR5009 Wireless LAN adapter Win7

  Hi, I am ready to upgrade my HP G70-468NR for Win7 laptop and downloaded all the drivers Win7 from HP, there's a new Win7 driver for all my devices except the Atheros AR5009 Wireless LAN Adapter. Research on the Web as a whole does not produce a no more. There is one for VISTA, which I already have and currently employs. I know the obvious solution is to use the VISTA driver or try to download from Windows Update after the Win7 update - I'm just puzzled as to why it is not any mention any of this device on the page for my laptop Win7 drivers. Laptop is only two months.

  Thank you, Ken

  Hello

  Atheros Wireless here the driver for Win7 by HP (version 8.0.0.172)