Wireless router is disconnected from the PC (s) during the use of Firefox 37.0.1

Similar Questions

• When you transfer files to the internet, the router disconnects from the internet, but the network remains in tact.

  I have a wireless router Belkin g with 1 Server 2003 cable and 2 xp machines and 1 machine vista wireless. My problem is when you transfer files to the internet, the router disconnects from the internet, but the network remains intact. I cannot remote in all computers, but not internet. Once I have restart the router, everything works fine. I was wondering if anyone else has had this problem and how to fix them.

  original title: problems with the router.

  I have no solution for you.  It seems more likely to me that it is a hardware problem - but if it was related to traffic, I would expect that the problem on the downloads more downloads.

  In addition to DSL reports, you could try to ask some of the forums that specialize in the updated firmware for wireless routers.  This is not to say that you need to install the modified firmware (although there may be good reasons to do so), but people who do usually firmware mods are much how the equipment works and what might be its potential failure modes.

  Is one of the best-known sites DD-WRT.com, but there is one list of other here: http://en.wikipedia.org/wiki/List_of_wireless_router_firmware_projects the firmware on these sites was originally designed to run on Modem Linksys WRT54G, but applies generally to Linux with chips Broadcom - based wireless routers and DD - WRT claims that its firmware takes care of some Belkin routers.  If your router is one of those on what DD - WRT will work, there will probably be someone in the forum there will have something for you.  See the list here: http://www.dd-wrt.com/site/support/router-database

• Current file to use when it is disconnected from the network wireless/wired - shared network drive

  Hello

  We have a problem where we receive a "file in use" message when you are disconnected from the network. To reproduce the problem, what we do is:

  (1) connect to the wired network wireless disabled with

  (2) create a test document

  (3) to enter text and save on network share

  (4) remove the network cable

  (5) add additional text

  (6) reconnect the network cable

  (7) try to save the file to the network share

  At the beginning by clicking the X is the new message you want to save. Click Yes and the message arrives until the next time you hit the Hit of X no. and he loses the last change.

  From here we then go up to the network share, open the file and it comes up with "file in use. Open read-only. File is opened by us (Administrator account), and there is NO temporary file in the shared folder.

  Tried so far:

  -Run net config server/autodisconnect:-1 for trying to stop it disconnect the share

  -Checked pane, pane preview and off 'display the description of the pop-up window for folder and desktop items '.

  -Windows Update

  We try to reproduce on wired connection, because it is easier to reproduce that disconnects wireless. Seems to have an impact on several operating systems. Share folder is shared on a Windows 2008 R2 x 64 machine.

  Is this a known problem or is there something that we can configure to try to prevent the locking file after logging out? Ideally, we want the decline to go unnoticed and provide uninterrupted service to the user, unless they are trying to save during the fall.

  Thanks in advance for comments :)

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Why I disconnected from the internet when I turn on my printer HP5510 wireless?

  Why when I turn on the wireless printer HP5510 the computer is disconnected from the internet

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  If get di rates the lingua desiderata dal menu a tendina in alto by send killed her nella lingua vostra scelta di domanda. Forum it cui hai posted by e by lingua francese. SE non riesci a find wishes of the lingua it supporto delle options by Esil international can be found following further he link that sotto:

  http://support.Microsoft.com/common/international.aspx

  Grazie

• Vista: suddenly, the computer disconnects from the internet (or router) after have been asleep.

  Vista: suddenly, the computer disconnects from the internet (or router) after have been asleep.  I have not changed the settings and reflected on the line for the problem and there are people with similar problems, but the answers (and a few sample photos) do not correspond to my screen.  Vista's automatic updates, so I think it has something to do with a recent update.  I had to restart my computer to access the internet.  Right now, I've changed my settings "Never" Go to sleep.  All solutions?

  Hello.  I found a sample - the person who has the same problem as me, and apparently it worked - but I don't have this option of powersave mode when I get to this tab.

  "Indeed, the ethernet controller properties window had turned on powersave. Thank you 1 million'

  

• Why is that every time I open an application that my phone disconnects from the wifi

  Everytime I open an application that my phone disconnects from the wifi.

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• SOLUTION for your HP printer disconnect and/or constantly disconnecting from the network

  If you are having a problem printing, scanning or fax with any HP printer because of this be disconnected and constantly disconnecting from the network, here again is the fix!

  I thought that this all after several failed attempts with HP Support, my Internet access provider and various troubleshooting tasks including reinstall the HP software and more and more.  Well, through self teaching on internet and exhausting search for 6 months, I FINALLY thought to it.  OMG!  I'm a paramedic (not IT) and a little computer but far not an expert.  I have all of you here!  Nobody seems to have the answer, but I'm sure that I'm doing it to 97%.  Whatever it is, if it please answer and let me know that it worked for you!  :-)

  It doesn't matter if your printer is installed cable or wireless.  You don't reinstall your software, no recycling power of your printers or your router/Modem.  Your printer is unstable on the network and continues to log out or disconnect from the network it is NOT because the software is glitched, it isn't a firewall problem by saying, is not a router problem, is not a problem with your power cord, because most networks use a 'Beach' and IP addresses for security reasons This kind of "cycles" the IP addresses of the devices to reduce the risk of an attack.  A printer is not a threat, but the 'network' don't own human intelligence, so he does not know this.  Here are my step by step instructions on how to basically your printer address IP (static IP) instead of change back through a cycle so drop your printer on the network or disconnected.

  Funny, if you're someone who has had the elements in your print queue, they will not print, and you turn your printer off and on again and suddenly your print... well documents, join my club.  The reason it works is that when you turn on the printer, it starts with the same IP address before cycle.  If you are someone who is sitting there for a while and all of a sudden your printed documents without changing you something... it is because through the cycle of change of IP address, it hits your printers IP address and the network would allow him to print.  Not very funny, I know.  It took me forever to figure out why my printer would print sometimes, but not always.  Since I thought at this point, I can SCAN, PRINT, and use all the features of my HP software installed like HP, Photosmart Essentials Solution Center.

  On your printer, go to menu/Setup/network and press OK.  In the network menu, print a "network configuration page" so you can see the IP address and other settings of your printer.

  Now, back to the main menu on the screen of your printers.  Or you can go to your web browser and type the IP address using decimal numbers too and this will take you to the web page of your printers.  Choose: setup\network, then press OK.  Look for the IP settings and press OK. Choose "manual" instead of "automatic". Manually enter the IP address it as well as the default gateway that you can see the Network Setup page you printed earlier.  Note: If you manually set the IP Address of the printer, make sure that it is outside the range of your router's DHCP. Otherwise you might encounter a problem with IP addresses on your network duplicate. (If you don't know how to do this, write back and I'll explain).  Don't forget to click "save changes".  Now, restart your computer, and print just what you want.  :-)

  A trick I often use with DHCP network printers:
  In printers and faxes, right-click on the printer and select "Properties".  Click Add a new port.  Choose standard TCP/IP port configured for the host name of the printer. Read the host name of the network printer configuration sheet.
  
  Using my method means that you always connect to the printer even if its IP address changes (which can happen with the dynamic configuration). This does not jeopardize the security of your network.  It shows just your printer to stay put and stop traveling the highway of IP address.  :-)

  The DHCP range is the range of IP addresses that the router distributes automatically as devices to join the network.  The DHCP range is determined by the router and each brand has a range that is set at the factory (which can be changed by you).

  Default value for the DHCP of your D-link is 192.168.0.100 to 192.168.0.199.  Thus, outside the DHCP range est.2 a.99.200 a.254.

  Is a handy cheat sheet attached.

  You can change this interval by entering the router settings page - type the router's IP address in a browser, enter the login information and access the DHCP parameter area (varies depending on router, hunting around).

• This family member is able to make me become disconnected from the internet.

  Windows IP configuration
  Windows XP / Home Edition / 2002 Version / Service Pack 3

  A member of the family interferes with my computer and worse me. It's work! This family member is able to make me become disconnected from the internet.  I'm not sure how he does it, but I have a feeling that he is able to see my IP address and it blocks my IP address of the router. I'm not familiar with TCP/IP or DNS settings. Here are some of my settings, perhaps you can direct me in how to change a parameter, so it can stop.

  Windows IP configuration
  Host name...............................................
  Primary Dns suffix...
  Node Type................................................ Unknown
  The active IP routing... NO.
  Active proxy WINS... NO.
  DNS suffix search list...
  Ethernet wireless network connection card:
  The connection-specific DNS suffix.
  Description............................................................
  developments
  Physical address...
  Dhcp Enabled.................................................... Yes
  Autoconfiguration enabled... Yes
  IP Address..........................................................
  Subnet Mask......................................................
  Default gateway...
  DHCP Server......................................................
  DNS Servers......................................................
  ......................................................
  Whether by TCP/IP or DNS, I believe that the family member is accessing my computer. Is it possible to change these settings where the family member is not able to see my local IP address? I need to change the DNS server settings and change TCP/IP settings. Maybe I'm wrong and you can tell me what I should do to fix this problem. Thanks in advance for your answer.

  As already mentioned LEM that the rule on the router has an absolute rule that can and cannot access the internet or other network resources.  I suggest you lock your computer, turn off the server, Remote Service registry service and Remote Desktop and change the password on all administrator accounts.  Make sure that your firewall is enabled and have it block all inbound traffic local.  Then talk to the guy that controls the router and ask him to lock the router with a password, the only way to bypass the router, then will be by resetting it and the router administrator will know if everything else does.

  Having said that your problems are probably not caused by another Member of the family, it could be caused by flaky or failing hardware, bad cable, bad router, network card bad, if you really think that your problem is caused by a member of the family of your computer, then your question must be addressed and brought to a head in a "family meeting" rather than in a public forum on the internet.  There is not a lot of people read here can do to change the behavior of the members of your family.

  John

• My computer is constantly disconnected from the internet and to reconnect I just unplug the cable for less than a second and it starts to work instantly.

  My computer is constantly disconnected from the internet and to reconnect I just unplug the cable for less than a second and it starts to work instantly. Does every 5 to 10 minutes and it gets frustrating. It is not the cable modem because it is constantly connected, and I repeatedly checked.
  I have this problem with all programs on the internet and she does every day and probably every 5 to 10 minutes.

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Disconnecting from the network home

  Win 7 I have a stand-alone computer (not other computers) with a USB - connected printer and a connection to a modem (without router) via a network (?) (not USB) cable.  I have no other computers or printers.  Win 7 connected me to a network home, maybe because my printer is compatible with wireless (but I have no WiFi - or interest in functionality).  If I disconnect the home network I lose the internet connections or printer?

  My apologies but I found your statement at the opening a bit confusing.

  Your home network is connected to the modem, a local area network, and is a type of HOME that helps your computer share with a reliable source, connected to your modem/router.

  A HOME network is essentially the default setting...

  A PUBLIC network limited with any computer that can be attached to your router/modem to share files.

  If your printer is connected via a USB cable, disconnect from the network will NOT affect the communications between your computer and the printer and the printer will do what you expect it to do.

  However, you will lose Internet you disable the network connection.

• Disconnected from the internet

  When I disconnect from the internet it shows again that "access Local network only.  With this clue my internet automatically re - connect itself.  How can I stop this from happening?  Thanks for any help you can offer.

  Hello

  Updated Windows Update, updates Antivirus definition and other functions need internet access to function properly.
  If you really want to stop internet connection right click on the network icon beside the clock (bottom right)
  and disconnect - the network - or the power off your router or Modem - turn off WiFi or disconnect
  Network cable.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Disconnect from the internet

  I keep get disconnected from the internet, even if the network and sharing Center shows that there is no problem. The only way I know how to solve this problem is to re-login. Is there a way I could resolve this with on the duty to keep the re-login.

  Hello

  There is a firmware version of January this year for your router. I suggest you update your router to the latest firmware.

  05/01/2011 - (format date us)

  Ver.2.1.01 (version 5)

  Here is a link to the site.

  MyPcHealth - free tools

• When disconnecting wifi disconnects from the pc, I have to reconnect manually

  When closing my pc it disconnects from the wifi area. I have manually reconnect to the box. Why is this happening?

  Hi CynthiaDoner,

  Thanks for the post.

  We will be more than happy to help you in this case.

  Try these steps and check the result.

  Method 1

  Disable the wireless adapter power management settings.
  a. click Start, type devmgmt.msc and press enter.
  b. expand network adapters.
  c. double-click on the wireless network adapter, and then click the power management tab.
  d. uncheck "allow the computer to turn off this device to save power".
  e. click ok to apply the changes and restart the computer.
  f. check if the problem persists.

  Method 2

  Update the wireless driver
  see automatically get recommended drivers and updates for your hardware .
  b. download and install the update just for your device and restart the computer.
  c. check to see if the problem persists.

  It will be useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Tecra A2 crashes when you are disconnected from the internet

  We have a customer with a Tecra A2 provided by ourselves that, after 5 months without a problem from time to time, hangs when it is disconnected from the internet.
  Reboot the laptop and the internet can be found sometimes up to 20 times and then it blocks again when we disconnect from the internet IE. A Ref post causing VOIP problems were found and the software disabled and disconnected hardware. No difference. Running XP SP2, IE6, Kaspersky Anti Virus, Tiscali ISP ADSL, modem ADSL Tiscal (a new requested just in case). A lot of work to do and lose valuable time with customer problem.
  Thank you

  Hello

  It seems that a 3rd party software causes this very strange problem.
  You suggested that VOIP is causing the problem. Well, the problem is that Toshiba doesn't support any 3rd party software and applications.
  What I can suggest is to check the Event Viewer logs. You will find all the errors that appear on the OS. Double-click the error and you should see the description of Microsoft.
  Maybe you will find a solution.

  Good luck

• Try to disconnect from the iCloud on my Macbook Air (El Capitan 10.11.2) but in system preferences, it says I have to create a new password for my Admin account - and then the new password I get says "password does not match"?

  I am trying to add my outlook email account to the Mail app, but because it's the same email for my iCloud, for some reason, they are linked, and I discovered that I need to disconnect from iCloud, and then add the outlook account.

  But when I try to disconnect from the iCloud in system preferences > accounts on the internet, it says I have to create a separate password - but when I get one it says "passwords do not match"? I tried to do different and same, nothings working: S

  The dialog box is like this:

  [Stop using iCloud?]

  Create separate password for (name of the admin account)

  -You will no longer be able to log in or unlock your screen with your icloud password, and you will need to remember two passwords separately.

  iCloud password: __________

  New password: __________

  Check: _

  Index of password: __________

  [Use the separate password?]

  Not sure why that is, that the password does not when it's supposed to be the new s password?

  Also, I would like to know what to put in the box check?

  Help much appreciated!

  Thank you

  Oh wow. I just realized I was leaving the case confirm the void and the message "password does not match" mentioned. I just need to retype my password. Hilarious that I have not worked this one earlier.