Wireless router wired to the router wireless help?
I have a linksys wireless router and have run an ethernet cable to my desktop which is outside my house. I have the ethernet running into a hub for computer cable then switch (hub). I want to add wireless access in the office. Can I add another wireless router to the desktop and plug it into the power switch? How can I do this?
- Follow the instructions for 'LAN to LAN' Cascading in the link below:
In waterfall or connect a Linksys router to another router
Thing to keep in mind when cascading a router:
- Change the IP address of the secondary router to something like 192.168.1.254 so its on the same network, but is not in conflict with the main router
- Make sure that the DHCP service is disabled on the secondary router
- Make sure that nothing is ever connected to the internet port of the secondary router
- Differentiate the wireless SSID by location (Ex: downstairs) and the channel
Tags: Linksys Routers
Similar Questions
-
my wifi stopped working suddenly. It shows no available networks. However, another iphone is able to connect to the router. Help, please
Hello
1 have you made changes to your computer recently?
2 are you able to access the Internet through an Ethernet cable?
I suggest you to follow the steps in the link and check if it helps.
Windows wireless and wired network connection problems
I hope this helps.
-
Remove or replace the name of the network (Vista, wired to the router)
I have 4 computers on my network home (a new laptop and Windows 7 desktop computer and an older laptop and desktop Vista, which are replaced - laptops are wireless). I had a LOT of problem with printer sharing, especially after a reboot printer goes offline, and I can't find any way to get them back another remove printers and reinstalling (disappointment, disappointment, disappointment) online. And then I started having problems with one of the Vista (cables to the router) computers access the computer Windows 7 new, also wired to the router.
Then I will begin first with the last problem. Trying to get the old wired Office Access/recognize the new desktop windows 7 Wired, I ended up resetting my fairly new Linksys router e2500 to its factory setting - and in the process gained a new network name. I finally understood how to get the laptops wireless to recognize the new network (should be easy, but it wasn't), but the old wired Vista insists on the use of the former name of network, one that appears in the network and sharing Center implementation. The other funny thing is that even though she seems to be using the former name of network, I put on Jack autour with her so I don't have Internet access on my old Vista computer.
I guess that because it is trendy, it seems not to worry about the network name, but it's bothering me because it's not fair. However, I can't find any way to delete the old name of network. I spent the day on that and am still confused. Baffled because it is working and baffled because I can change the name. I also get a lot of mistakes "Windows cannot access \\myWindows7computername" when I double click on the name displayed in the network folder of Windows Explorer (probably more serious problem). In any case, I want to address what should be first the problem of easire.
I discovered enabled network, public folder sharing, which transforms file on the computer discovery and Vista network, sharing the printer and sharing active files (but only on the printer and all the other things of file not checked), and sharing files public computer to Windows 7 (the one with the printers connected to it) - and passwords disabled on both (all computers).
So my first question is how to make the network name on the Vista desktop wired old deleted/changed/replaced for the new name of the current network. Why it does not insist in using the former name of network that no longer exists.
Ron in round rock
Sorry about that, but I got my answer from another forum, a Linksys Forum - and I will talk about a few things in case other people have this problem/question.
To remove the network name that appears on the Network Center and sharing, click on the link to customize to the right of the network type - and on the next screen, click on merge or delete network locations, you will / should be able to remove (don't know what fusion done or means) the network with the wrong name, EXCEPT that you can't remove it If it is being used (which is / was the problem I had). When I unplugged the cable between the computer and the router, I was able to remove the network location (the one with the old name of network), I tried to get rid of.
Now for the confession. All this has nothing to do with the name of the network - and most of the things in my original post is just smoke also. I was going down the wrong path. It turns out that with computers connected to a router, there is only one network involved and you can call it anything you like and it will work. There is no selection of a network involved as in the case of a wireless network.
Network with wired computers name is determined lby network name "you enter" on the screen to customize network settings, the screen you get when you click Customize on the screen of the Network Center and sharing - and you can type in anything you want here. I'd so go through all this. I simply had to re - enter the network name on the screen to customize network settings, that is simply a name that you can use for your own reference.
Ron in round rock
-
Desktop elite keyboard 1011 Microsoft Wireless model does not install the drivers please help
well, I have a model of elite microsoft 1011 wireless keyboard and a wireless microsoft 1012 receiver model (it's a combo with a mouse, but is he missing)
My problem is that I installed windows 7 x 86(32 bit) and I tried to plug right in my keyboard wireless via reciever.at first the 3 LEDS that have notified when keys locking are activated cycle first.
After that he was known as 3 times it stopped.i unplugged the receiver thenreplugged in.this timw there no same cycle.
I opened Device Manager to check the drivers.it been regestering unknown so I googled the names and found the microsoft drivers (don't know if it's maybe for a newer version on or not, he had the series in the installation) I installed them I clicked on one that says Microsoft elite wireless keyboard then install.after knowing it was installed I opened dev.manager and check to see if it helped it was always regestered as unknown so I restarted my computer and check again, but the same
any help would be useful
If I remember correctly he did for win98/xp
Oh, this is for her tech data sheets
Sorry if the question is already asked that I tried to be as straight as I could be
http://docs.google.com/viewer?a=v&q=cache:pXBz4ER-bMwJ:download.microsoft.com/download/3/b/e/3beedec5-0835-42b4-bfdf-0084f6d6d530/TDS_WirelessOpticalDesktopElite_0502A.pdf+microsft+desktop+wireless+keyboard+1011&hl=en&gl=us&pid=bl&srcid=ADGEESiy7Tv5ivEWg0Bq76vRRMyn28r2TtQFEk-z0Fzsw6R3zP8KsdqKh4mIxpYdE2tNp3EJ2QE4Fz1BwySrv_czKk_0fCB-ES0zHUaVjO1unTtsjoUdq56qWeT_iuGS0FP7neq_JHXh&sig=AHIEtbQUklfEshI_IP9Z_3X-A9uGsTXYsw
If you have yahoo messenger installed on your computer send me a message if you have anything I can try this * address email is removed from the privacy *.The 7.10.344.0 driver version is the one offered to the keyboard itself.
For office all the proposed version is ITPx86_1033_7.00.260.0.exe.
You have a line of brief and clear view between the dongle and the keyboard? The signal may be weak or the dongle damaged the transfer to the new system.
-
I reinstalled win xp on my laptop but impossible to reinstall my printer samsung clp-320 wireless. help please
Hello
Thanks for posting this question in the Microsoft Community.
To provide a proper resolution, I would need more information on your side.
1. What is the error you get when trying to install the printer?
2. after the installation of Windows XP, you have installed all necessary drivers?
3. have you updated to Service Pack 3 installed?
Please provide us with more information to continue troubleshooting as a result.
Alternatively, you can also post this question to the Samsung support community: http://www.samsung.com/uk/support/model/CLP-320/SEE
You can check this article to see if this help.
Solve printer problems: http://windows.microsoft.com/en-in/windows/printer-problems-in-windows-help#fix-printer-problems=windows-xp&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
Thank you.
-
After the initial setup time machine should be hard wired to the modem
Should time machine be hard wired to the modem after initial installation
Yes, if it must be used in its default configuration as a router DHCP network and all clients need to connect to the World Wide Web.
-
How to file share w / two offices one is wired Win7, the other Win8 Wi - Fi
Hi, I'm trying to get courses between 2 desktops of file sharing. They connect to the Internet through the same router. One is a Win7 PC wired to the router, the other is a Win8 PC connected via Wi - Fi.
I think the problem is that they are not on the same network. How can I solve this?
Hi, am fixed by creating a homegroup. I tried a bunch of other stuff, but I got results after that I followed this advice: http://www.sevenforums.com/network-sharing/29060-can-t-start-peer-name-resolution-protocol.html
-
IPhone flattened my mother fell and broke her screen and I bought her a new iPhone, but I want to know the iPhone ID forget him, I can send the IMEI or help me so that I change the iPhone to my mother and I thank you
Yvonne > > iphone
Sorry
-
I downloaded a few applications directly from safari, will jailbreak my iphone? More apps that I downloaded Safari isn't in the settings. Help, please.
software can not install any other source then app store on an unjailbroken ios device
-
My office is half divided. One opaque side and the other clear help
My Mac Mini desktop computer has suddenly split into two halves. One opaque side and the other clear help as if half of the screen is selected
I just realized that control of the mission, the launching ramp and dashboard do not work (I can't call them upward)
-
my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?
Have you tried to connect your iPhone to iTunes or the wall charger and let your iPhone for 5-10 minutes to charge its battery?
-
Hi, I just bought a used second generation ipod nano and whenever I have unplug the charger a line crosses the screen and I can't do anything with the ipod. Help, please.
When you do a Reset (reboot) on the iPod
Learn how to reset your iPod - Apple Support (see iPod with a click wheel)
do you see this line on the screen when the Apple logo? If you do, it is probably a hardware problem. If the line is not there at the start, but returns after the iPod starts, you can do a restore of the iPod using iTunes. This d erases the IPO, reinstall its software and sets it to the default settings.
Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support
If the problem persists after the restore, the cause is likely to be hardware problem.
-
When the scrolling of a delay in the loading of the screen look help
When the scrolling of a delay in the loading of the screen look help
The distant evidence loses almost fragile Disclaimer
-
My brand new ipod touch will not even appear on itunes. It says I have to update the software, but it is already updated on itunes and the ipod. Help!
What version of iTunes you have?
-
Hello I have a macbook pro 2011 and in a few days I had my swelling of the battery and after that I ordered a new and only for a day, it uses my new battery began to swell again, what could be the problem? Help me, I am a student that I can't do it by new
is it because of power problems?
Take it back to the Apple Store and ask them to check it out. It should be under warranty. Bring the MBP along too. It sounds like there might be a problem with it.
-
ON PAPER MESSAGEDU MY C510 SAME HP IF THERE IS ENOUGH PAPER IN THE TRAY, PLEASE HELP.
ON PAPER MESSAGEDU MY C510 SAME HP IF THERE IS ENOUGH PAPER IN THE TRAY, PLEASE HELP.
We recommend that you reset your C510 HP first. You can perform the reset by following the steps below:
1. press the "Power button" to activate the product.
2. with the product, unplug the power cord from the back of the product.
3. disconnect the power cord from the wall outlet.
4. wait at least 15 seconds.
5. plug the power cord into the wall jack.
6. reconnect the power cord to the back of the product.
7. If the product does not light by itself, press the Power button to turn it on.
Once done, print a self-test report by following the next steps:
1 load plain white paper in the input tray.
2. from the home screen on the control panel of the product, click "Menu" on the upper left side. A list of menu options screens. 3. click on "Settings" and then click on 'tools '. The maintenance of the printer menu displays.
4. in the maintenance of the printer menu, click "Printer Status Report". The product prints the report.
If the report is printed correctly, try again to print your original document.
If the problem persists, you may need to check the status of documents in the status bar. To do this, follow these steps:
1. remove the stack of paper from the status bar.
2. check that the obstacles within the status bar. A flashlight to view the mechanism inside the status bar to make sure that nothing is blocking the paper to engage with the rollers. Even small pieces of paper can cause paper feeding problems. (Important: If any obstruction is detected in the paper path, you need to refer to "Cleaning the rollers" segment at http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c02248120-20%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken)
3. to review the status of the paper and then replace any paper torn, dusty, curled, wrinkled, or bent.
4. ensure that all the papers in the stack are the same size and type. Never charge which coexist types of paper in the tray. The product can only process one type of paper at a time.
5. press on the stack of paper on a flat surface to align the edges.
6. make sure that the paper stack does not contain less than 10 and not more than 25 sheets paper.
(Note: the limitation of the number of documents applies only during the phase of solving problems.) Once the problem is resolved, you can load the tray to its original capacity).
Once you have checked the status of documents, reload the tray in the following way:
1. lift output in open position and open the door of the feeder.
2. slide the width guide to its outermost position paper.
3. Insert the stack of paper into the paper tray with the short edge forward and the print down side.
4. adjust the paper width guide so that it rests against the stack of paper.
5. lower the output tray, and then close the tray door. Once this is done, print again an automatic test report by following the above steps. If this too does not resolve the issue, refer to some more solutions at HP support center link below: http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c02248120-20%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken
GuruAid.com
Maybe you are looking for
-
If I want to use Thunderbird for all of my emails in one place, I'm tired of constantly switch tabs in google to see all the... But google rocks because of how it displays everything is so beautiful. But when I have 10 e-mail accounts, I have to deve
-
Satellite P300 - conflict of resources on how to start
Hiya All, I am eager to see if someone could help me eventually. My father brought this laptop about 2 years ago, but disappeared since then but my young brother, the computer guru said stuffed that we think! Anyway, these are mistakes that we get on
-
Satellite L555-10N: driver for WIN 7 64 bit SATA AHCI controller
Hello can someone help me find a driver SATA AHCI controller for a fresh install of Win7 64 bit.Win7 OS installer asks drivers to storage before installation of operating system start. Normally he accepts driver .inf and .sys, but not such drivers in
-
The FEP Server alert notifications do not display the correct time zone
Time stamps FEP report When I receive my FEP Server alert notifications timestamps are far away. Nobody knows how to set the correct time zone, so the report will be accurate? I think that the default time is UTC.
-
ENVY 14-k124TX: SSD update for more storage (ENVY 14 k)
Hello I have a 14-k124TX currently Envy and you want to upgrade the disk SSD 128 GB to 500 GB. The vehicle currently has a samsung mzmtd 128 and I want to use a Samsung 850 EVO series. I opened my laptop and I'm confident on the evolution of Physics