Satellite P300 - conflict of resources on how to start

Similar Questions

• Satellite P100 - 160 (PSPAAE) - conflict of resources on how to start message

  For awhile, I had severe performance with this laptop problems. It takes 20 minutes to turn on.

  When he started gives 3 messages in the startup routine:
  ERROR: Conflict of resources-controller BUS series PCI on the motherboard. Bus: 0a, device: 04, function: 01
  ERROR: Conflict of resources-on the motherboard PCI mass storage controller. Bus: 0a, device: 04, function: 02
  ERROR: Conflict of resources-PCI on the motherboard. Bus: 0a, device: 04, function: 03

  Press F1 to resume F2 to Setup

  I tried the re-installation of the recovery disk, formatting the hard drive and all from scratch. I also updated the BIOS
  The end result seems to be that the startup still takes time, with the same messages, but once started the performance is improved.

  These devices appear in device and the warnings of problem management.

  Any thoughts on how to solve it please

  Help please

  Hello!

  It looks like there's something wrong BIOS or maybe hardware

  Have you also tried to reset the BIOS to default settings?

  I think that the recovery disc can t solve this problem because it appears after the current load to run BIOS. This means that in the worst case you have to go to an ASP and ask a technician for help.

  Good bye

• Satellite P300 with XP hangs at the screen "starting windows."

  I recently bought the Satellite P300 - 01 and had XP installed on it. I have fixed all the problems except for the question, that I'm going to start.

  When I turn on the laptop it loads everything flashes on the login screen and then hangs at 'starting windows' screen If I turn it off and then again about three times this issue finally arrives with the login screen. There was an ASP.NET account, and after the BIOS update that he disappeared, but the problem is still there? Any comments would be greatly appreciated.

  Thank you

  > There was an ASP.NET account, and he disappeared after the update of the BIOS
  The whole story is really strange

  I put t know how you installed XP on this laptop and why an ASP.NET account was created or exist, but in your case I would recommend doing so again.
  Then install all service packs, hotfixes and patches of the XP!

  Simply show words on XP on P300.
  A friend of mine has installed XP on a P300 yesterday too and the XP works well
  Everything works fine!

• Re: Satellite P300 - conflict with the display driver

  Yesterday, I suddenly had a conflict with my display driver. While working on my laptop, a blue screen appeared and then the screen went black and stayed like that. When you use an external monitor, it is possible to start in SafeMode (in normal mode, a blue screen appears). It is possible that a Windows Update has occurred, but I can nog
  cancel anything (no Windows recovery point).

  I uninstalled the display driver and downloaded the latest version, but it doesn't seem to help. Reinstalling Windows won't work or the other cause the installation DVD detects a hardware error (the display driver).

  Does anyone knows how to fix this?

  Kind regards
  Jeroen

  Hey Buddy,

  > Reinstall Windows won't work or the other cause the installation DVD detects a hardware error (the display driver).
  What Windows disk, you used exactly?
  Normally before starting with the installation of Windows, you must format the hard disk and create partitions. If everything is clean at the disk Windows installation starts.

  I advise to use the Toshiba recovery disc. This disk can restore the original settings of the case and before Installation starts the drive HARD to wipe completely.

• My Satellite P300-24 t is suspended accordingly when starting

  After 3 years of trouble free service my laptop does not work in normal mode. It starts, but after booting with the Office of the screen doesn't react at all (not even on the keys Ctrl + alt + delete). It restarts after power button for 3 seconds.

  CHKDSK finds problems with the hard drive, probabely it is a hardware problem on the graphics card. No idea how I can find a solution to this?

  My first advice is to reinstall the OS with original Toshiba recovery image and see if the same thing will happen with the factory settings.

  If you are ready to do it please do test a few days and post the result here.

• Satellite P300 - 18 m - recovery disc won't start

  Hello

  I have for the recovery disk, but it does not start, so I can't yet to erase my hard drive.
  So far I have tried:
  -Start, then press f8
  -Start, then press c
  -start and press 0

  I've already changed my boot order, but my laptop still does not boot CD. The support page, I found several ways to fix it, but nothing works. It also seems that the cd/dvd is not recognized.

  Anyone know what I can do now? Please help :)

  Friend Kim

  Hey,.

  What model of laptop you have exactly?

  Normally, you can boot from the recovery disk Toshiba if enter you the BIOS boot menu, and then select the CD/DVD drive as a boot device. Then press ENTER and that the computer starts from the disk. Key combinations that you mentioned as F8, c, etc. doesn't work, they are for HARD drive recovery.

  > It seems also that the cd/dvd is not recognized
  The drive is recognized in the BIOS?

• How to install Win 7 on Satellite P300?

  I have a laptop Toshiba Satellite P300. When I bought it, I had to this topic Vista Edition home premium. Now, I tried to install Win 7.
  I have the DVD of Win 7 Professional but when I want to boot from the DVD win 7 it wouldn t accept and the boot PC always from the hard drive even when I changed it on the BIOS as it doesn t recognize. I tried with another Win 7 DVD to format the hard drive and install Windows 7 as the normal procedure, but Toshiba doesn't recognize any DVD Win 7, it acknowledges that its original DVD system (hddrecovery files that combines the win vista and all the drivers of Toshiba for laptop, as you know).

  So, how to format the pc and install Win 7 (if you run the installer of win 7 on the computer I install Win 7 but I can t pc format and I still keep old files and I put t like) so please help me if you have a solution for that I thank you!

  I installed Win7 on P300 s brother without any problem. I don't understand what the problem with your drive in Win7.
  Are you using the original installation disc for Microsoft?

• How to replace the keyboard on Satellite P300 - 20H

  Hello!

  I just bought a replacemant for my Toshiba Satellite P300 - 20H keyboard and I was wondering how to actually replace it?

  Any response would be greatly apreciated,

  Thank you, Sophie x

  Video on [http://www.youtube.com/watch?v=UQaBRJoH-M0] (2mins in) you "lever" off the coast of the plastic band that runs across the top of the keyboard and remove the 2 screws. I expect that the connector of the ribbon cable must be of the type where a hinged band (diff color to the body of the connector) holds the cable in place. It appears if the cable is fired and you push it when the cable is inserted. There is normally a line on the cable to show that you have completely inserted the cable and the cable is inserted instead. -Examine the original cable until you remove

• Satellite P300 - 1 c 9 - How long works the battery?

  Hello

  I was wondering if someone could let me know how long I should wait for the power of the battery on my satellite p300 - 1 c 9 to last?

  The laptop is now 11 months, again it only lasted a meager 1 hour, now its down to 44 mins which seems to be very short.

  It doesn't seem to be the point of a lot having a laptop that must be connected whenever you use!
  I talked to toshiba tech when he was nine and was advised to unload a few time completely to form it and he said he would get me another 10% (wow, a whole 6 minutes), which made no difference.

  look forward to hearing any suggestions.

  Angela

  Hello

  Sooner or later each battery will die and lose the own performance that s nothing unusual

  You should know that the battery working time depends on the use of the laptop.
  The battery much faster running high-performance applications that need many remedies of material.
  All parts of equipment must be able to! CPU, GPU cooling modules, display, etc.

  Reduce the brightness of the screen and set the CPU or GPU to lower performance in order to save the battery.
  You can do this in Win7/Vista power management!

  Here's a useful HowTo:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=41

• How to restore Vista on old Satellite P300?

  Sorry it's a long.

  I bought a new P70 to replace my old P300 that came with Vista and I now want to give it a new facility for the children to use. The problem is that I had partitioned the disk and had tested the betta and the version RC1 of Windows 7 before its release and he also had XP, now I can't get on the recovery drive holding the 0 key and did not have the repair option on the splash screen advanced when using the F12 key. I know that the Recovery partition is still there because I saw it when using a disk partitioning tool before you make changes and I'm deleting it.

  After what I read I think that drive hidden (EISA Configuration) that holds the BCD, stored options for the 0 key and the menu key F12. I made backup discs when I arrived at the origin of the laptop and checked well records, but when I went to use it, they have been declared as corrupt so the only other option I had was the images I made with another program but cannot boot from the disc I made and I guess it's because of SATA drivers Win 7 could not be started or until what I injected drivers, just do not remember how I got them in the disk imaging.

  So, if anyone knows where the option for the 0 key is stored, and I assume it's in the BCD himself, someone know how to recover it or re - write? The other option I can think is how the recovery partition is enabled and try to do otherwise. My oldest son has a more recent P300, is it possible to copy the BCD and its player hidden files to start mine? The other thing is when you restore from the recovery partition you need a Windows product key or is already stored on the recovery partition because I can never remember having seen one and I'm not one for my new P70.

  Any ideas?

  After these modifications and tests with your P300, you will not be able to use the HARD drive recovery facility more. This works if the laptop has only factory settings.

  Now, there's only one way to install the original use of Vista recovery disks. I m afraid you didn't create these disks, right?

  Anyway, Satellite P300 is well known to me and my brother has the same machine. We updated with new SSD and installed Win7 on it. It works like a rocket. So my advice to you is to install Win7 on this machine. All the necessary drivers, the tools and the utilities that you can find on the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  If you need help with it let me know.
  One more thing: the product key at the bottom belongs to the original version of Vista and it cannot be used for activation Win7.

• Where and how to buy a recovery for my Satellite P300 PSPCCA 015015 disc?

  Hello

  I'm sorry, I know this question has been asked before, but I can't seem to find the solution.
  I have a Satellite P300 PSPCCA-015015, (which came with Windows Vista, when I bought it).
  I did a clean install of Windows 7. Now many things did not work with this OS if I want to reinstall the previous version of windows.
  The only thing is that I have created a recovery disk and lost their: (.)
  Now, I have the hard disk that windows creates the recovery disc files in. All I need is to either 1 get the software recovery disk creater my model or
  the recovery disk full reinstall with factory setting.
  Would you know where I could get one of these two.
  I am WIndows 7 CAP to death at the moment and Im regreting his installation and lose my disks :(

  Oh also to tell you I'm alive in the Japan now, but I bought the laptop in Australia, so there English OS, more I was wondering how I would go he posted to the Japan.
  or if I go somewhere in Tokyo and solve this problem by a toshiba shop that performs repairs.

  Thanks I hope I can get an answer and a solution of someone.

  I don't know how it works in Australia, but I think you can order the original recovery by Australian Toshiba service provider media.
  I don't know if they'll send it but a friend you can order and buy it for you and send you later to the Japan.

  I think it's the easiest way to get the original Toshiba drive facilities.

• How to put a Satellite P300-1d(a) back to factory settings?

  How can I solve my Toshiba Satellite P300 back to factory settings?
  On Acer computers, it is [alt] + [F11] or something and HP computers, it is integrated in the system - so it's really easy. Toshiba have a 'key' like that?

  I'm sorry for my bad English, I m a Norwegian girl.

  I really hope an answer, thank you :)

  Have a nice night or day!

  Exact description how you find under http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
  If you have any other questions please let us know.

• Satellite P300 - how to install Windows 7 64 bit?

  Hello

  I had a Toshiba Windows 7 upgrade for my P300 which was under Vista 32 bit. During installation, asked me if I wanted to install 32-bit or 64-bit Windows 7 and I chose 32-bit. Installation worked fine.

  Now (moths later) I decided that I would like to install the 64-bit version instead. I have an own (custom) settled by booting from the DVD, but it don't did me not option for the moment and all re-installed Windows 7 32 bit. I know that the 64-bit version is on the DVD (there is a folder for it) - how to start from the DVD and have it install the 64 bit version?
  I didn't format the drive when you perform the clean installation - if I do that it will give me the option?

  Thank you
  Ben.

  Great news, mate! :)

  Thank you for this feedback. I'll test it on my Satellite P300 I want to upgrade to Windows 7 too.

  In addition, an upgrade is possible to the same version: This means that Vista 32 bit can only be upgraded to 32-bit Windows 7. On 64 bit it s the same ;)

• How to format Vista and install Xp on Satellite P300?

  Hello

  I have Toshiba Satellite P300-1GQ with Vista Home Premium installed.
  But now I want to format the drive and put a new installation of Windows XP on it. I have my XP CD, I start it s loading the files and when it ends and says windows starts now so I can start to format and then install a new windows it gives me a blue screen saying windows found problems and stopped.

  It says to check the hard drive or a virus and try again. I did a lot of time checking everything, but nothing has changed. My windows locked and I can't get in shape? Question: How can I format them?

  Everyone please help. My CD of Windows XP Home edition works well I checked it if it s not my drive he owes me something on the laptop? Any ideas?

  You are using Windows XP Home SP2 installations CD edition?
  You have loaded the SATA drivers?

  One more thing: before you start the installation of Windows XP Home edition, did you create a Vista recovery media?

• How to pass the Satellite P300-1EI for Win XP

  Hello

  I just bought the P300-1EI Satellite with windows Vista Premium (32 bit), and I'm trying to downgrade it XP OS.
  Is there a guide how to do this or at least where can I get the drivers (graphics and webcam...) full xp for this laptop.

  Thank you.

  Hello

  You need a guide how to install XP?
  Well my friend, if you need this guide then I recommend reading some threads here in the forum on the installation of Win XP on the new series of laptop as P300, A300, L300, etc...
  There are hundreds, son of nay, thousands on this theme! Search, read and learn

  Satellite P300-1EI seems PSPCCE series and released all the XP drivers for this laptop.
  Just check the European driver from Toshiba site.

  A hint; You must include the SATA drivers.

  Welcome them