Wireless signal detection

Similar Questions

• HP dv6-7010us wifi is not detecting wireless signals.

  A month ago I bought the computer hp dv6-7010us laptop. I stated it upward and checked the wifi options. He was able to see very well wireless signals. Then I installed a new operating system - windows 7 ultimate 64-bit. I installed all the drivers for it and everything was fine except for the wifi. The drivers are installed, but now it doesn't detect wireless signals. It keeps telling me "no connection is available. I went to multiple wifi access points where I KNOW there is a signal, but it does not detect.

  The current driver, I have for the wlan is AR9485 of Qualcomm Atheros 802.11b/g/n. A representative from hp support told me that I would have to order recovery dvd (yes I've eliminated the recovery disk) and restore the factory operating system so that my wifi works properly. It doesn't look good for me. This seems to be a driver problem. So I uninstalled the driver, returned the site official HP to try another wifi driver and installed the same driver that I had before... with the same result... no connection available.

  I'm stumped and could use some help.

  Thank you.

  OK so I ordered the HP restore disc last Friday... and he got here Saturday - HP GO!

  Anyway, I reinstalled the factory system, and of course wifi collecting wifi signals. I watched the pilot and it was the same one I had installed on my windows 7 ultimate - (but it wasn't). So I used a free software called 'dual driver' to backup all drivers factory... reinstalled my windows 7... double driver to restore drivers from the factory os and BLAMMO! My wifi now works with my windows 7 ultimate.

  So, my advice to everyone is backup all drivers factory until you wipe your system. Restore them after you install your own operating system.

• Wireless signal recognized but not internet connectivity: laptop HP 2000, model QE334UA, Windows 7

  I have a 2000 Notebook PC HP, Model # QE334UA, running Windows 7.  The wireless signal is showing all the bars at the bottom right, but I am unable connect wireless to what anyone (for example, any web browser, Outlook, Dropbox).  When you connect via a LAN, however, I have no problem.  Here are some details on what I tried:

  1.) this same problem occurs on all the networks I tried, even if the other computers are on these networks, is not a problem of router/modem.  Yet, I restarted those and nothing helped.

  Rebooted 2.) the computer.

  3.) done a system restore.

  4.) checked IPV4 settings make sure IP & DNS server addresses are configured to automatically get.

  5.) turned on and off the wireless on the keyboard button.

  6.) as gone with the Device Manager and press update driver software for all network adapters.

  7.) deactivated and reactivated all NICs.

  I have read many other forums - than where I got these ideas- and it seems a common problem, but I could not find an answer that works.  I'm not too technically savvy, so maybe I'm missing something, but any help would be LARGELY APPRECIATED, especially because my warranty just expired.

  Thank you

  Zack

  I have it!  It turns out that my SonicWall VPN has been the origin of the problem.  Thank you!

• Wireless card detects WLan but will not connect to them - Satellite U300-111

  Hi all

  I'm in a mixture with a problem which I hope I could get a help from you all.

  My problem is that my wireless card detects networks wireless next to my laptop but when I try to connect to one that it doesn't connect at all. Even to my own wireless network.
  There is nothing wrong with my wireless network I got connected and tested several devices wireless Conect to it.

  Hopeing to get some sometimes you all on how to solve this problem.

  MY LAPTOP IS A TOSHIBA SATELLITE U300-111
  BOUGHT IN THE MIDDLE EAST
  MY WIRELESS CARD IS: INTEL (R) WIRELESS WIFI LINK 4965AGN
  THE DRIVER VERSION IS: 12.0.0.73
  WINDOWS VISTA 32 BIT
  SERVICE PACK 1

  Thank you

  H

  Reboot the router and try to establish connectivity again.

• Satellite L750 - low wireless signal

  I have a 5 day old L750 Satellite which can collect only 40% wireless signal less than 20cm from the router and loses signal total of about 2 m of him, turned to Toshiba support who suggested to the restoration of the system, did this and no improvement. Have you checked the Atheros driver and he said to his place to date, also checked the option to which has been suggested in other threads.

  The router is good because my vintage Compaq and ipad2 have full strength signal of several rooms by far.

  Please help as I'm pretty impressed with my first purchase of Toshiba and will return it if I can't solve this problem.

  Hello

  Have you noticed this problem only with the Eco Mode setting or also with power plan to high performance? This means that you must define * Maximum Performance * power option for the WLAN card in terms of power.

  Next to the update of the WLAN driver, you should also check the BIOS version. Take a look at the page if there is a newer version and if so try to update from Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• wireless signal is low by next computer laptop

  wireless signal is low compared to adjacent laptop.  Can what adjustments or changes I make to wireless setup to eventually receive a signal stronger?

  Hi Steve,.

  Thanks for posting your question on the Forums of community of Microsoft.

  According to the description, I see that you have found the laptop low wireless signal.

  For you help you please answer these questions:

  1. what operating system do you use?

  2. What is the brand and model of the laptop that has the problem?

  3. you Ant changes made to the computer before the show?

  I suggest you refer to the article provided:

  Why the my wireless signal strength is so low?

  http://Windows.Microsoft.com/en-in/Windows7/why-is-my-wireless-signal-strength-so-low

  For the related issue of Windows or anything related to the Windows operating system, do not hesitate to contact us and we will be happy to help you.

• Hi I have my computer will not pick up my wireless signal, but it captures others, in small residence also other devices pick up thanks for link wrong signal strong whats for your help

  Hello

  my computer will not come up to my wireless signals same signal is strong, but it picks up other signals wireless in apartments even block
  Thanks for your help

  Hello edwardmurray21,

  Thank you for the question!

  It is disheartening to know that have problems you with the wireless signal. As I understand it, you are not able to choose wireless sugnals.

  I need to ask you some questions to help you best.

  1. what operating system is installed on the computer?

  2. which browser is installed on the computer?

  3. What is the brand and model of the router?

  Answer to us if you are having problems with the signals wireless or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• my printer will not get the wireless signal and so my laptop can not find print, what should I do?

  How can I make the printer get the wireless signal?

  1 Microsoft do not have printers - so it would not be my first option to ask in the forums to help MS.

  2. we have even less likely to help when you do not tell us what printer, what operating system, what router wi - fi or anything!

  I suggest that you follow the instructions in your printer manual, with operating instructions of your wi - fi router to work things out.  You should connect the printer via a cable to the wireless installation.

  If stuck try the support forums on the Web site of the manufacturer of the printer with the forums on the website of the manufacturer of the router.

• In more of microwave ovens and cordless phones... can TV, VCRs interfere with WIRELESS signals.

  WIFI & PHONES WIRELESS, ETC.

  In more of microwave ovens and cordless phones... can TV, VCRs interfere with WIRELESS signals.  I had to buy a cordless phone and it was always in the sealed box.  I was then with a laptop to the library branch when the librarian approached me and said that "even if unconnected cordless phones and microwave ovens, as well as TVS, VCRs and vacuums... can cause interference with the optimal speed of WIFI and efficiency... »

  Can someone explain if it is absolutely correct.  Of course, I politely responded that given that the laptop was still in its original packaging and seal (I had just bought and not even opened) and unplugged, it could not interfere with anything.

  Please specify.

  Thank you.

  Joe

  A non powered device (not plugged in, no batteries, etc.) cannot intervene in anything at all.  No power, no transmission, no interference. However, any electronic device can interfere to some extent with any other wireless signal, if it is running.

• No signal detected from the monitor

  Hi all

  Built for computer spec - December 2005

  CPU-Intel P4 3.2 GHz, LGA 775, 640

  GPU-Inno 3D GeFORCE 6800GS 256 MB DDR3 PCI-E

  MB-ASSUS P5LD2 LGA775, Intel 945 chipset

  HD-MAXTOR WD5000AADS - new may 2011

  PSU-foxtail BN106 L7 530W-new in May 2011

  The last month replaced CMOS battery.

  I spent most of the last 14 hours or more trying to find a reason for the above message on my monitor BENQ FP71G + flat screen.

  When I turned on the computer this morning, it starts in Windows and office, but less than a minute, the screen froze.

  The cursor would not move and no buttons worked.

  I tried the button on the front of the case and the light on the monitor did not turn green.

  I lit it and upward came the message 'no signal detected '.

  I tried several times but I got this message each time.

  I had to use the "switch" on the front of the box to turn off.  I turned on and off several times - I could hear the pip MB and windows intro music but the screen don't start - it stayed orange [standby].  The activity light also flashes as Windows goes through commissioning.

  I tried to use the WIN XP SP2 disk and the disk of the software for the GPU at the start, but are recognized.

  I checked the monitor [with cable] on another computer and it works.  I have not tried another monitor on the desk.

  I spent a little time to read a lot of Google links [which most tend to all refer to each other] and have not found a solution, other than the suggestion that the GPU is deceased or the MB is dead [or both, if the GPU has overheated]

  I just found a link to the subject of this thread when you search forums answer.

  I'd appreciate it if anyone has a solution to this problem.

  Rgds

  Damascus [aka Antioch]

  Update

  I bought a GPU pretty fresh and install it solved the problem.

  In addition, I noticed that POWER supply was not as hot there just prior to the problem.

  Thanks to all those who gave their help.

  Rgds

  Damascus

• With the help of desktop computer as a wireless signal Repeater.

  I recently moved and my for my PS3 wireless reception is terrible, so I was told I could use this other desktop computer, which receives the signal much better, as a relay instead of buy a wireless signal Repeater. How can I get this computer also spread the signal from the original router downstairs?

  I'm sorry, but there is nothing built into Windows XP that can do what you want.

  You might be able to do a search on the web and find a third party program to do this.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• What's Dell Dimension 2400 desktop computer capable of capturing a wireless signal? Should this function be switched?

  Dell dimension 2400 desktop computer was plugged into the wireless router we have. We got a new computer and moved the old desktop (Dell 2400) in another room. It is not picking up, or even searching for a wireless signal. She still has this ability? How can we it give this ability?

  The Dimension 2400 is not normally a built-in wireless networking capability.  To view, go to the Control Panel > Classic view > System > hardware > Device Manager and double-click network adapters .

  If that doesn't show wireless network card, you can add it by buying a USB wireless network adapter or a Wireless PCI adapter card .

• If you turn off your WiFi router is still sending wireless signals?

  I have the wrt54g router and if you set the 'disabled' wireless settings which means that WiFi is disabled, which stops the router actually send wireless signals?

  I guess my question is do the WiFi compatible routers send wireless signals even if you "turn off" the WiFi option on your router? Thank you.

  The WRT54G is an active wireless router. If you select off in the wireless tab then the router will not any signal wireless broadcast.

  

• No 2nd router Wireless signal cascade

  I have a wrt160n my main router cascading to one e1200 to the other end of my house. The idea was to improve wireless signal here. Has passed through a long discussion with Cisco support settnig system upward.

  IP address of the e1200 occupies more than 5 outside main router, dhcp is disabled. Connection bewtween routers is Wan to Wan.

  I wired the e1200 but no signal wireless signal. Any ideas?

  You mentioned that there is a WAN - WAN connection. Is your E1200 a version 2 router? If the wireline work, the wireless should work as well. Were you able to configure the settings of you before Wireless 2 routers cascade? Did you use the same network names? If you have done so, turn off the WRT160N and leave the E1200 power and see if it is broadcasting. Otherwise, you will need to access the router's interface again and adjust the wireless channels.

• EA 6200 wireless signal disappears momentarily and returns

  I have a 6200 EA (EA6200), new with a computer, an apple TV and 4 Iphones/Ipads, all within walking distance.

  My problem: every once in a while, the wireless signal disappears for a minute or two and then returns to normal.

  During the navigation of the user interface, I was unable to find out if there is an event log to show what is happening, so that I'm flying blind.

  Which never happened with my much more old linksys wireless adapter.

  Thank you!

  Hi elnuevohomero,

  This may be caused by interference. Ensure that the 2.4 GHz and 5 GHz networks have different SSID. Try changing channels as well.
  You can try using 6,3,9 or 1. It is also recommended to place the router on a higher location, where it can broadcast wireless signal properly.