Wireless stop working... Adapter not appearing not

Similar Questions

• Re: Equium A200-15i: Wireless stops working, so wireless adpater visible

  My netwrok A200-15i wireless stopped working by itself during the download.

  Internet works via ethernet. Wireless physical switch is on, but the indicator does not turn on. No wireless adapter appears in the "network adapters" in the system (only the Ethernet card is visible).

  During the installation of the Atheros driver, receive a message that the hardware is not connected.

  Help, please.

  Looks like the wireless card is dead the light that lights up with the switch is wired and not software driven.
  Even if it's very weird for the light to malfunction so there maybe a small chance of the card somehow has detached itself internally.
  I'm not familiar with the A200 I know that some earlier Toshiba models allow you access to the wifi cards since they are optional.
  For less hassle, buy a USB dongle or cardbus, but check online first that some brands good markets suffer from range and a poor performance.

  Richard S.

• Hello, my copy of Dreamweaver CS4 stopped working, a message appears indicating "license for this product has stopped working" error 150:30

  Hello, my copy of Dreamweaver CS4 stopped working, a message appears indicating "license for this product has stopped working" error 150:30. I have a license I bought from Adobe directly, and which has always worked well. Any tips?

  I have a new iMac, retina 5K, 27 inches. end of 2014 with a 4 GHz Intel Core i7, 32 GB memory DDR3, Mac OS Yosemite

  I contacted Adobe support, it seems lie that serial number has not worked because I have chosen English instead of English Intermational! Thanks again for the quick response. Concerning

• Dell support center has stopped working, continues to appear

  Dell Support center has stopped working, continues to appear. Latest Windows 7 with IE using. Computer is less than a month. It's embarrassing.

  Jim Parham

  Dell Support Center 2.0, this is no longer supported

  Uninstalling Dell Support Center

  Rick

• When I install IE9, my printer Canon wireless stop working and more shows on my network

  When I install IE9, my printer Canon wireless stop working and more shows on my network, accordingly. I am reluctant to reinstall IE9... of ideas? I use Windows Vista

  Hello
  • You receive an error message when printing?
  • What is the model of the printer?
  • Do you still have Internet Explorer (IE) 9 installed on the computer or you have returned back to IE 8?

  If you have IE 8 then I suggest you to install IE9 and check the error message when you try to use the Canon printer.

  You can also follow these links:

   
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
   
  Network printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

• Wireless stopped working, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.

  My computer stopped working wireless, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.  I've tried everything and my router is intact.  My Protection of Kaspersky flags are gone from green to red and says threats have been detected. What should I do to get back on the wireless.

  original title: Wireless not working not

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• continue to open with 'WINRSCMDE' window has stopped working. will not disappear after you restart twice.

  This window allows to appear with the message "winrscmde has stopped working and was closed" thereon and disappeared with restart twice. My microsoft windows is not working properly now. There was a message that was missing a DLL. How to solve this problem? Thank you.

  Hello

  1. have you made changes on the computer recently?

  2. when exactly you get the error message?

  I would suggest trying the following methods and check if it helps.

  Method 1: Put the computer in a clean boot state, then check if that helps you.
  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method2: Chell event logs and post back details
  See: What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope the information is useful.

• Bluetooth Lenovo S10e has stopped working - device not found / not recognized USB device.

  Hello

  For no reason that I know, installing bluetooth on my small S10e has stopped working.

  I noticed a few times when stop I had a "BTstackserver" does not message.

  I use the laptop to download regularly from a device compatible bluetooth.

  Today, when I go to connect, it says "bluetooth device not found".

  "Verify that your device bluetooth is properly connected and turned on".

  Hardware manual displays the config of LED and is correct, that if I press the "Fn" keys and "F5", I get the menu to turn on and off both the wireless and Bluetooth. I can turn on and off Bluetooth and wireless both with this menu option, BUT when I activate the bluetooth, I get the message 'one of the USB devices attached to the system is faulty or is not recognized.

  I deleted the Bluetooth installed and re-installed software by using the two bluetooth install files published on the list of drivers on lenovo S10e. Neither one works. I know that you need to install dir C:\DRIVERS once Setup has finished unpacking.

  I tried several other obvious things but without success. I also enabled "Bluetooth coopération" in the wireless LAN settings.

  All I can do now is get to the Bluetooth device under the keyboard cover and take a look at that? Anyone who has any suggestions until I get out the screwdriver? (The unit is out of warranty).

  

  I received my replacement bluetooth module and installing it, bluetooth is working again.

  I keep getting "BTW stack server" stopped responding when stopped down, but this does not seem to cause any problems.

  Too bad that original bluetooth module did not survive barely a month after the end of warranty date...

  I'm used to a greater reliability of Lenovo.

• Service center security Windows XP (error 1060) and firewall (error 1075) have stopped working. dependencies not installed.

  I have Windows XP Pro SP3 and the Security Center and firewall stopped working. I couldn't restart using various commands in the statutes for help. I keep getting the below error messages. It seems that there is a service or services that I have to install that I'm not aware of...

  Microsoft Windows XP [Version 5.1.2600]

  Copyright (C) 1985-2001 Microsoft Corp.

  Microsoft Windows XP [Version 5.1.2600]

  Copyright (C) 1985-2001 Microsoft Corp.

  My comment * Security Service does not work

  C:\>cmd/k SC QC WSCSVC

  [SC] OpenService FAILED 1060:

  The specified service does not exist as an installed service.

  My comment * Windows Firewall does not work

  C:\>SC query sharedaccess

  Service_Name: sharedaccess

  TYPE: 20 WIN32_SHARE_PROCESS

  STATE: 1 STOPPED

  (NOT_STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)

  WIN32_EXIT_CODE: 1075 (0 X 433)

  SERVICE_EXIT_CODE: 0 (0X0)

  CHECKPOINT: 0X0

  WAIT_HINT: 0X0

  C:\>net start sharedaccess

  1075 system error has occurred.

  The dependency service does not exist or has been marked for deletion.

  HOWEVER, when I click Start, click network connections: I have no icons to work with on the screen. See my other related post I copied below:

  "" error failed with error 0 x 80070424: the specified service does not exist as an installed sercies: "."

  To restore the missing "Network connections" service, you can use the reg. here:

  http://WindowsXP.MVPs.org/NetMan.htm
  But what cleared it is still a mystery. I would also run an analysis for virus/malware.

• My speakers stopped working. Not detected in Control Panel

  My speakers just stopped working, now when I connect, I get a found new hardware message (pci device) but when I apply the wizard, he found nothing.

  In my control panel, it has not detected speaker. I lost my drivers somehow? I have Norton Antivirus.

  My speakers just stopped working, now when I connect, I get a found new hardware message (pci device) but when I apply the wizard, he found nothing.

  In my control panel, it has not detected speaker. I lost my drivers somehow? I have Norton Antivirus.

  Perhaps.  Visit the hardware manufacturer's website and download and install its adequate for your sound card card device drivers.  (Audio).

  What you have is not something I know in light of what you have. ;-)

• Windows Vista "Media Center has stopped working" could not be opened.

  * Title *.
  Windows Media Center does not

  When I try to open Windows Media Center (Vista Ultimate), I get this message, "Media Center has stopped working".  I tried everything I know to solve this problem, but haven't found a solution.  Is it possible to reinstall Media Center without do a total reinstall to reformat?

  Hello

  Were you able to solve your problems with Media Center? Given that my suggested solution previously did not work, the solution of file system auditor Mark Ferguson suggested worked for you?

  Please let us know. Theresa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error - birth of nations has stopped working. Not able to run Rise of Nations in the Windows Vista-based computer.

  Original title: Rise of Nations

  I used to play on my computer but now the game stops after the opening movie is finished, it closes and says "rise of nations has stopped working. a problem caused the program to stop working corectly. Windows will notify you if a solution is available. "He has never found a solution to the problem. This happens every time. reistalling tried diferent even repeatedly in different places without success. My os is vista home top and I have a dell studio xps. the disc is not a top scratch. Please help me! Thank you!

  Hi GavinGraham,

  I recommend you contact the center of Rise of Nations Solution & advance helps support professionals.

  http://support.Microsoft.com/GP/cp_riseofnations_master#TAB4

  Hope the helps of information.

• my windows media player is VERY slow to start, sometimes stops working, will not play some videos

  When I run the program it opens but will not play a song sometimes longer than 15 minutes. Stops working and the screen will sometimes foggy transparent white - I can still see the player, but he has a white on fog. Today, that happen when you try to copy a cd. -just a regular old cdr.

  Show first frame of video and play a sound but video does not move. Windows vista-home premium-toshiba.

  I suggest that you try to reset the media library. Note firstly reset the library will make you lose all play counts and ratings too. Then, follow these steps:

  -Restart the PC.
  -Click Start, type services.msc in the search field and press ENTER. In Services, locate the Windows Media Player Network Sharing Service. If its status is started, double-click on the service and click on stop.
  -Click Start, type %LOCALAPPDATA%\Microsoft in the search field and press ENTER. This folder opens in Windows Explorer.
  -In this file, rename the old Media Player like Media Player folder. If you do not see the folder, then it is probably hidden. Set Explorer to view the hidden files and folders and show protected system files.
  -Launch WMP, your library will have been reset and will be rebuilt. Check if the problem persists.

• Why Internet explorer does not work well, stop working, do not dowlown and the printer too

  When I use the Microsoft Office word 2003 stop working. I can't use the printer because it says I don't have enough right. Internet explorer stop working when I want to use. When I said work stoppage, because stop (the word screen "not responding") and for seconds, I have to wait this back and start to work so slow.  I also have a lot of problems with the dates.

  Please can you check my computer and advise me how I can solve these problems.
  Thanks for your help
  Alicia of Bazo

  Hello AliciaD'Bazo,.

  Thank you for your message.  How long these problems last?  If all of these symptoms have occurred recently, you can perform a System Restore to a point when your computer was functioning as designed.

  If a system restore does not resolve the problem, I think that you would be better served download and run the malicious software removal tool.

  After you run the tool, you will find that your computer is or is not infected with a virus or a virus.  At the same it is, please post on the forum Vista Security steps to return your PC to a usable state.

  Another way to ensure that your computer is 100% clean is to perform a new installation.  Don't forget that a new installation will delete all your data and the current settings.  You would need to save everything that is important before you perform a clean installation.

  We can't wait to hear back on your part.

  See you soon

• reminder stopped working, does not?

  Not sure just at the moment where it happened, but "sticky notes" stopped working, answer.

  By clicking on the 'New Note' function, nothing happens, no error message, no pop up, nothing.

  It's as if the icon is 'dead '.

  How can I fix, delete, and download or whatever it takes to make it work again?

  Thanks for all suggestions, cures, what to do!

  Personally I'm afraid of encryption that when it's not it really won't.  Windows 7 comes with encryption of database files included via the Properties tab of the file, or with the supplied program of BitLocker.

  BitLocker Drive Encryption
  http://Windows.Microsoft.com/en-us/Windows7/products/features/BitLocker

  Encrypt or decrypt a file or folder
  http://Windows.Microsoft.com/en-AU/Windows-Vista/encrypt-or-decrypt-a-folder-or-file

  Programs such as WinZip allow only the password protect compressed files.  You can even store files on secure USB flash drives.

• Display driver stopped working, does not recover...

  HP Pavilion dv7-6015tx

  Windows 7 32 bit

  ATI Radeon HD 6770 m

  Hello

  I thought I had solved this problem before, but it persists today.

  A while back my pc would freeze and then recover, with pop - up saying dialogue

  "display driver has stopped working and recovered."

  Now, it does not recover, it remains just frozen.

  This does not happen when I come back to the graphics card Mobile Intel.

  It freezes when I use AMD ATI Radeon.

  My PC freezes when I lead average graph low load.

  (I watch YouTube videos via the media player and internet browsing)

  This means that I'm not hardcore gaming, however when I'm hardcore gaming my pc does NOT freeze.

  I have the latest software/driver graphic HP provides me with.

  I can't install ATI, because everything I download from there, says it's not compatible with my device.

  I also think that sometimes my pc is overheating.

  I have HP CoolSense set for maximum cooling, however I think that this is not enough. (blue screen of death)

  I tried SpeedFan software of third party temperature sensor that automatically adjusts the fan speed.

  However, I don't think that the software is compatible with my motherboard because it can read my fan RPM speed.

  I think it's the GPU causing overheating because the CPU is 50 degrees celcius at an acceptable (?).

  This is a new laptop, so there is no collection of dust or debris in the exhaust gas.

  I would like to update my graphics driver, there were no update driver since the: 2011-05-06

  Also, I would like a method to increase the speed of the fan, preferably both GPU and CPU

  to lower the temperature and components

  Even as I write this, now I got force restart the computer because it froze. (driver has stopped working)

  I realize that the graphics driver may not be the only problem

  or it may be another problem, disguised as a problem of the graphics driver.

  I am willing and pledged to use all means, (with the exception of a full recovery of my pc)

  to fix my current misadventures with my laptop.

  Kind regards

  John

  You must first update the latest version of the BIOS of your laptop.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-96635-1&CC=US&DLC=en&LC=en&os=4063&Product=5085756&sw_lang=

  Once you update to the latest version of the BIOS download and install the following softpaq and this should solve the problem:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=ob-95106-1

  This should solve the problem.