Wireless streaming from PC to Smart TV

Similar Questions

• wireless streaming from computer to monitor

  How can I get my new laptop with windows 7 to stream to my new sony 60 "monitor? They both see one another, but do not connect.

  Hi carpentersjatc,

  1. what happens when you try to listen?

  You can consult the following Microsoft Help article that will help install and use Play in order to disseminate.

  http://www.Microsoft.com/Windows/Windows-7/features/play-to.aspx

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit ourMicrosoft answers feedback Forumand let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Apple TV (gen 3) freezes when Streaming from iTunes

  I have a third generation Apple TV (latest updates OS) on an airport extreme wireless network 802.11ac. When you try to stream from iTunes (latest) on Mavericks (all patches), many videos can take up to five minutes to start playing, and after playing for twenty or thirty minutes, they "freezing" for anywhere from one minute to five minutes before resuming playback. If I was streaming on the internet, I could understand the delay, but it doesn't have much sense when streaming from a local source.

  What I'm trying to listen to are movies and TV shows that have been downloaded on iTunes. On Apple TV, I select 'Machines' and then select 'Movies' or 'TV Shows' and select the movie or TV show to watch. According to the film or television show, they will be either start immediately or that there may be a delay until five minutes before starting to play.

  I restarted the Apple TV and I checked there is nothing cached on the device, so I don't see where any content downloaded on Apple TV, itself might be forced memory.

  I took my two my edge router and my WiFi network and I can verity that Apple TV is streaming on the computer and not from the internet. I also checked that there are no other consequence WiFi activity (NTP updates, updates to the ASP, etc., but without the use of actual data bandwidth) and I checked that iTunes is the only process that consumes any real network, CPU, or the disk on the computer resources is continuous from. I also checked the other devices on the network are also not any bandwidth real WiFi.

  So I'm puzzled. Any idea what's going on here? Why Apple TV freezes? It is really this poor management of its buffers work? (I find that hard to believe!)

  Any ideas on how to debug this yet? Even better, any ideas how solve this problem?

  Thanks in advance!

  JK

  Try via Ethernet

  Test on another network

• EA6300 is not the video stream from computer to Ipad on my local networt

  I was previously using Video Stream (from Connect3) for videos from my computer to my Ipad with no problems. I used a WRT400n and have now upgraded to the EA6300. Now my Ipad can't access the server on the computer. I tried port forwarding, but that did not work. I guess that some settings on the router blocks. The computer is connected to the usb wireless network. It was connected via a cable when using the 400n.

  IP 192.168.1.118, IP 192.168.1.40 ipad computer. Anyone has an idea why the Ipad and the computer can not connect?

  OK, I thought about it. I had to go to the control panel and the settings of firewall and say let the Videostream program through. The strange thing was he had 2 ad for Videostream, one has been verified, the other was not. Checked both and then it was fine. Thanks to all who responded.

• Apple tv closes when streaming from my ipad

  Apple tv closes when streaming from my ipad

  It is impossible to repair without unplugging everything.

  Can you elaborate?

• Streaming from PC to XBOX 360 problems stay connected

  I have problems when I try to stream from my PC to my xbox 360, or when I use itunes remotely.  Programs to connect, but they remain not connected for a long time.  I am constantly having to go into services and then by restarting upnp device host.  The question does not connect not, but remaining connected.

  Someone had a problem like this?  Any help would be greatly appreciated.

  Please try to disable the Hello Service. Click Start, type services.msc in the search field and press ENTER. In Services, locate the Hello Service, double-click it, stop if it is running and set its Startup type to disabled .

  If you still get errors in the event viewer after that, then please copy and paste their description (the text under the general tab) in a new post.

  Tim Baets
  http://www.BM-productions.TK

• EA6500 disable wireless streaming

  I think I've been carefully through each single screen and may not know how to disable the broadcast wireless on my new EA6500. I usually see cela in 'Wireless' settings but must be missing something.

  Please indicate where I can get this temperature!

  We actually noticed this as well. There is no option to disable broadcasting SSID on the EA6500. I found this article from cisco knowledge base that explains why he is no longer available.

  Title: where can I disable Broadcasting SSID in Linksys Smart Wi - Fi account? ID article: 25811

  "In the broadcast SSID router configuration is no longer an option in Linksys Smart Wi - Fi routers.

• HP Officjet Pro 9500 Wireless: Printing from iPad

  My Officejet Pro 8500 Wireless can print from an iPad?
  If so why not iPad recognize it on our network home wireless?

  Can anyone help?

  George

  Hello

  It seems that this model is not compatible AirPrint, but you should be able to use the hp eprint app to print wireless from your ipad - download the application and make sure that your printer and your ipad are connected to the same wifi network. When it is finished, you should be mean print wireless from the eprint app.

  http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/is-OfficeJet-Pro-8500-A909g-CB023A-printer-AirPrint-e-print/m-p/1477997#M28785

• HP 3520: Impossible to print using wireless Direct from iPhone

  Have been printing for the last 2 years of my iPhone using Direct wireless. My HP3520 has never been protected password. Tried to print this morning that the usal but cannot print. Somehow my HP3520 became password protected. How can I disable this?

  Hello

  From the front panel of the printer, using up and down scroll arrow until settings is highlighted, then press OK.

  Highlight the Wireless Menu and press OK.

  Select Direct wireless , and then press OK.

  Highlight (No Security) and press OK, confirm if necessary.

  Which will disable any password for the Direct wireless network and you should be able to reconnect from your iPhone.

  Respect,

  Shlomi

• After the update for tvOS 9.1, it cannot play Live Video Streams from the start, Breaking NHL Gamecenter Live

  Since tvOS 9.1, update when I try to play an ongoing game from the beginning, using the NHL Gamecenter Live application, it will start playing for a second and then jump to live.  Basically, it breaks the app for the way I use it.  You can save 10 seconds each time, and he will play where leave you, but if interrupt you or try to fast forward / rewind it leap backward to live again.

  Jumping to living like that can easily spoil a game showing you the advance score.  In addition, it allows me to watch a game that has already started overnight since I don't want to miss the beginning of the game and can not start from the beginning to the end of the stream.

  I contacted NHL Gamecenter Live about this and they made it the Apple TV update:

  "At this time, the new Apple TV update does not support advance fast/quick return characteristic of live broadcasts."

  Does anyone know of a way around this, or if this is a bug or design?  If it's normal then Apple has actually ruined my Apple TV after only a few weeks of use.  I really hope that's not the case.

  Has anyone else noticed this problem?  I can't find any discussion about this but it seems like a pretty major flaw for me.

  Thank you!

  Scott

  I accidentally tag this message with iOS 9.1, it had to be tvOS 9.1.  Sorry about that!

• Create a data streaming from C++ stream and read it in LabView

  Hi all.

  I'm working on a project that is to connect to a tracker of movement and reading data of position and orientation of this in real time. The code to get the data is in c ++, so I decided that the best way to do it would be to create a c++ DLL that contains all the functions necessary to first connect to the device and it reads the data and use the node to call a library function to power the Labview data.

  I have a problem, because, ideally, I would like a continuous flow of data from the code c ++ in Labview, and I don't know how to do this. Put the node function of library call for a while loop seems like an obvious solution, but if I do it this way I'd have to reconnect to the device whenever I get the data, which is quite a bit too slow.

  So my question is, if I created c ++ function that creates a data stream, could I read that in Labview without continually having to call a function? I would rather have only to call a function once, and then read the data stream until a stop command is given.

  I'm using Labview 2010, version 10.0.

  Apologies if the question is badly worded, thank you very much for your help.

  Dave

  dr8086 wrote:

  This method resembles an excellent suggestion, but I have a few questions where I don't think I understood fully.

  I understand the basic principle is to use a call library function node to access a DLL that creates an instance of the device object and passes a pointer too in labview. Then a separate call library function node would pass this pointer to another DLL that could access the device object, update and read the data. This part could be in a while loop, then continue on reading the data until a stop command is given.

  That's all. I'm including some skeleton for example code. I am also including the code because I don't know how you experience multi threading so I show how you can use critical sections to avoid interactions between threads so that they do not lead to questions.

  // exported function to access the devices
  extern "C"  __declspec(dllexport) int __stdcall init(uintptr_t *ptrOut)
  {
      *ptrOut= (uintptr_t)new CDevice();
      return 0;
  }
  
  extern "C"  __declspec(dllexport) int __stdcall get_data(uintptr_t ptr, double vals[], int size)
  {
      return ((CDevice*)ptr)->get_data(vals, size);
  }
  
  extern "C"  __declspec(dllexport) int __stdcall close(uintptr_t ptr, double last_vals[], int size)
  {
      int r= ((CDevice*)ptr)->close();
      ((CDevice*)ptr)->get_data(last_vals, size);
      delete (CDevice*)ptr;
      return r;
  }
  
  // h file
  // Represents a device
  class CDevice
  {
  public:
      virtual ~CDevice();
      int init();
      int get_data(double vals[], int size);
      int close();
  
      // only called by new thread
      int ThreadProc();
  
  private:
      CRITICAL_SECTION    rBufferSafe;    // Needed for thread saftey
      vhtTrackerEmulator *tracker;
      HANDLE              hThread;
      double              buffer[500];
      int                 buffer_used;
      bool                done;       // this HAS to be protected by critical section since 2 threads access it. Use a get/set method with critical sections inside
  }
  
  //cpp file
  
  DWORD WINAPI DeviceProc(LPVOID lpParam)
  {
      ((CDevice*)lpParam)->ThreadProc();      // Call the function to do the work
      return 0;
  }
  
  CDevice::~CDevice()
  {
      DeleteCriticalSection(&rBufferSafe);
  }
  
  int CDevice::init()
  {
      tracker = new vhtTrackerEmulator();
      InitializeCriticalSection(&rBufferSafe);
      buffer_used= 0;
      done= false;
      hThread = CreateThread(NULL, 0, DeviceProc, this, 0, NULL); // this thread will now be saving data to an internal buffer
      return 0;
  }
  
  int CDevice::get_data(double vals[], int size)
  {
      EnterCriticalSection(&rBufferSafe);
      if (vals)   // provides a way to get the current used buffer size
      {
          memcpy(vals, buffer, min(size, buffer_used));
          int len= min(size, buffer_used);
          buffer_used= 0;                 // Whatever wasn't read is erased
      } else  // just return the buffer size
          int len= buffer_used;
      LeaveCriticalSection(&rBufferSafe);
      return len;
  }
  
  int CDevice::close()
  {
      done= true;
      WaitForSingleObject(hThread, INFINITE); // handle timeouts etc.
      delete tracker;
      tracker= NULL;
      return 0;
  }
  
  int CDevice::ThreadProc()
  {
      while (!bdone)
      {
          tracker->update();
          EnterCriticalSection(&rBufferSafe);
          if (buffer_used<500)
              buffer[buffer_used++]= tracker->getRawData(0);
          LeaveCriticalSection(&rBufferSafe);
          Sleep(100);
      }
      return 0;
  }
  

  dr8086 wrote:

  My main concern is that the object can get out of memory or be deallocated since it would not take place to any namespace or whatever it is.

  As you create the object with the new, the object expire not until the dll is unloaded or the process (LabVIEW) closes. If the object will remain valid between condition LabVIEW dll calls not a not unload the dll (who does if the screws are closed). When that happens, I don't know exactly what happens to the active objects (that is, if you forgot to call close), I guess the system recovers the memory, but the device could still be opened.

  What to do to make sure that everything is closed when the dll before I could call unloads close and remove the object is whenever I create a new object in the dll that I add to a list when the dll is unloaded, if the object is still on the list, that I'm deleting it.

  dr8086 wrote:

  I also have a more general question of programming on the purpose of the buffer. The buffer would essentially be a large table of position values, which are stored until they can be read in the rest of the VI?

  Yes, see the code example.

  However, according to the frequency with which you need to collect data from the device you have this buffer at all. That is, if take you a sample on every 100ms, then you can remove all threads and buffer related functions and instead to read data from the read feature itself like this:

  double CDevice::get_data()
  {
      tracker->update();
      return tracker->getRawData(0);
  }
  

  Because you need only a buffer and a separate if thread you collect data at a high frequency and you can not lose any data.

  Matt

• HP wireless keyboard from 2.4 GHz on the HP Pavilion Elite 083 Volume controls does not not in Windows 8

  I have a HP 2.4 GHz wireless keyboard on a desktop HP Pavilion Elite 083 UK:

  Model KG-08510 rev 1.1

  Product #ABU KZ256AA number

  Part number 505143-031

  .. Since the upgrade to Windows 8 Pro to Windows 7 Home Premium, I have problems with getting control of Volume +, - and disable keys on the keyboard to work reliably in Windows 8 Pro.

  In summary, the symptom is that when I start the PC from a start-up to cold which is a full power down of the State of the volume on the keyboard controls do not work.

  However, if I unplug and re - plug the USB wireless receiver that came the keyboard on the PC then on the keyboard volume controls begin to work again.

  I tried the following things to try to solve this problem:

  -Made a lot of new installation of Windows 8 i.e. reformatting the hard drive (no recovery) and fresh install Windows 8 on a blank hard drive.

  -Installation of Microsoft Windows all the updates available for the machine.

  -Manually install drivers wireless keyboard on the site of HP driver for my computer HP Pavilion Elite 083uk (this allows the screen display on to CapsLock and numlock which works reliably every time that I start).

  -Disable 'fast start up' in Windows 8 power settings

  -Using different USB ports on the back of the machine

  This question is re-producable each time and the keyboard volume buttons work fine even from boot cold when I was running Windows 7.

  I think that I have now found a solution / workaround to solve this case no matter who is interested.

  1. download and install the Microsoft "DevCon" tool that provides an interface to command line for Device Manager.

  Download and installation instructions are here:

  http://social.technet.Microsoft.com/wiki/contents/articles/182.how-to-obtain-the-current-version-of-device-console-utility-DevCon-exe.aspx

  2. create a Windows scheduled task with "highest privileges" that works on logon that issues the following command:

  DevCon restart 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

  This restarts "HID-compliant consumer control device" that is listed in my device manager which is middle for the proper functioning of the volume control and mute buttons on the keyboard (keyboard functionality is via a separate driver which is not affected).

  NB. you need to replace ""HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02"with whatever hardware ID is listed in the device for that Manager.»

  3. If the above does not work, then you must create a scheduled task to run a batch file with the following:

  DevCon disable 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

  DevCon enable 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

• stream HP 11: 11, 5G wireless stream

  My new HP flow 11 recognizes my slower wireless but not 5g - it isn't see it.   The review on the S11 I read before purchase. said it would... it was incorrect?

  Hello

  What is the model of your HP flow 11 (must be Stream 11-xxxxx HP). Now, a lot of new machines still use 2.4 GHz and this can be in a few years.

  Kind regards.

• Windows XP SP3 with router Belkin 802.11n Play 600N HD: how to minimize the impact on performance wireless streaming?

  Among the other computers in my house, I have an old Pentium 4 2 GHz Dell under Windows XP SP3.  I want to take all my music and put it on a (Belkin streaming) attached to the router hard drive, so I only store - and keep - it in one place, but can access to any of my computers - including this old Dell.

  The Question Is: there will be any type of CPU and/or memory (although I'm more concerned by the CPU) overhead streaming music from my drive attached to the router to my Dell (and if so: is it possible to mitigate that)?

  Specifically, I mean compared to run music directly to internal hard drive of the Dell: if any CPU or memory 'cost' for it in streaming on the network beyond what it already takes to play music.

  If it makes a difference: I use Windows Media Player to play the music.

  Hi RDougShelton,

  There will certainly be performance lag if played that music will be broadcast online in and the router will be bandwidth. For example, an impact on the speed of surfing.

  When you play locally on the hard drive, the bandwidth will be unaffected, however, you can face sligh increase the CPU usage.

  Hope that info help.

• Want 5530, wireless, printing from a laptop Mac and Windows 7

  Hello

  I've just set up my new Envy 5530 wireless printer on my iMac (running Mac OS 10.9), I can print comes it very well, even from my iPhone / iPad. I also posted an e-mail to her address and that works very well, too.

  However, I also have a laptop HP ProBook 6455 b and I'd like to be able to print wirelessly, of him also. But this does not work, I'm unable to install the printer using the "Devices and printers" Wizard on Windows 7.

  I went to:

  Control Panel > hardware and sound > devices and printers > add a printer > add a network, wireless or Bluetooth printer. This printer is not found, even when it is on and the rest of my devices can see and print on it.

  Do I need to download and install the drivers for Windows 7 from hp.com? Or is there something that I am not making the invisible to my Windows 7 computer printer?

  Thanks in advance for your help,

  David G.

  Hi David G.,.

  I understand that you can not get the printer connected to your Windows laptop. You are on the right track, you need to download HP ENVY 5530 e-all-in-one of the printer drivers. Select your operating system, and then click the button "next". Scroll down and click on "Driver - Product Installation software. Click Printer series e-all-in-one HP Envy 5530 full feature software and driver. This should bring up the download page, click on the 'Download' button and I suggest saving it to your desktop and run the installation from there.

  I hope this helps, let me know.

  Thank you