WISN and Group RF problem

We have on WISN version 4.0.155.5. We have set up a group name of RF for two controllers in the WISN and use auto-RF. The problem is each controller can be seen in the RF group and considers himself to be the head of the RF group. My understanding is everyone should see two controllers of the RF group and only should be the head of the RF group. Where could be the problem?

I posted the following in your other thread:

You still have APs on the two WiSMs? They will see only other members of the RF group who have APs related to them. I had the same issue, but when I moved 1 AP for each group of WISN the RF came up as planned.

Tags: Cisco Wireless

Similar Questions

  • problem setting users and groups in the areas of security

    Deploy my application ADF of my R2 Jdev11G, but the funniest, it is there is always deletion of the parent to my user setting group layout.

    for example. in Weblogic server: security realms > myrealm > users and groups, and then choose a user can then see 4 tabs 'General', 'Passwords', 'Attributes' and 'Groups' settings for the selected user, and then in the 'Groups' tab, if I choose a group in the column ' Group Parent: available ' in another column "elect." It will be removed later when I re - deploy application to the J-developer the next time, could you let me know how I could avoid this deletion? Thank you!


    Kind regards!

    My question is not clearly described or is it Bug Oracle? Do please help me to thay! Thank you!

    Edited by: xsyang January 6, 2012 01:14

    Edited by: xsyang January 6, 2012 01:25

    See the options in the app (menu)-> Application Properties-> deployment-> Weblogic (subnode under deployment in GR 11, 2), specifically the "migrate the following security objects' 'users and groups' checkbox.

    There is little documentation available on the options here: http://docs.oracle.com/cd/E24382_01/web.1112/e16182/adding_security.htm#BGBFJDED

    CM.

  • How can I restore my tabs and groups of tabs after a update to version 36.0?

    I work with many tabs when I use Firefox. I keep classified in groups of tabs, which helps to separate the different children to work I do and interests I have. I have been using this environment for years. When I started my job today, Firefox updated to v36.0, and noted the following behaviors:

    1. There is only one group of tabs when you try to display tabs at Panorama, as opposed to a dozen groups;

    2. normally if the hidden tabs (tabs in the same group as the startup group, and not the default page) downloading of content to what the user clicks on, icon, if any, and the name of the page will show on the tab currently, the tabs display 'New tab' and no icon. It seems, however, the number of tabs that exist across all groups of tabs, but are now ghosts this default value, a group of tabs. I must add, however, I do not count the number of tabs, so I can't be exactly. When you click on it, there is just a blank page. It is so strange that Firefox knows they are there but cannot simply attach the address.

    I tried to restore the following files from my backup of Windows Home Server to the folder AppData\Roaming\Mozilla\Firefox\Profiles\ .default < gobbletygook >:

    1. in the sessionstore-backups folder, I replaced the files previous.js, recovery.bak and recovery.js (not all of the upgrade ~) with the files yesterday and the day before yesterday.

    When that did nothing, I replaced

    2 sessionCheckpoints.json

    I do not see any file with a recent date that seems to be the one that I have to restore. I should add that I don't see hidden files. I thought about the restoration of the whole of the batch, but didn't know how it would affect the program v36.0 and the profile on 35.0.1 files.

    I have deadlines this week and must immediately restore my environment in order to make these possible. I have no address list on my Web pages to work in IE or other. Any help would be much appreciated.

    On a second note, I had been wondering recently if this tab group environment is an appropriate way to maintain my work environment. Sometimes, during the opening of Panorama, I would get an error saying a script takes too much time, but if I clicked on continue, it would display the groups in a few seconds. I considered bringing it in bookmarks, but it would be tedious and more difficult to access and open several tabs. Initially, I tried tabs groups thinking it was just a matter of maintaining a table of addresses (in tabs) with a name or an ID of tab group. How that might go wrong? Well, there, so it is obviously more complicated than that, and I did not know that upgrades would affect the data of a personal nature. That I should abandon the use of tab groups?

    With the help of information from the user, ptressel, in a post here on the existence of sessionstore.js when version 33 was released, I could easily get my tabs and groups of tabs as follows:

    1. close Firefox and, perhaps, wait a few seconds (30 years?) for any final closing of files;
    2. Check if you have a sessionstore.js file in your profile folder, named as I documented in my original post above.
    3. If this is not timestamped before the discovery of your problem, open the sessionstore-backups folder.
    4. Check if the recovery.js file is properly stamped and, if not, the recovery.bak.
    5. At this point, you are likely to find that none of them is before your problem occurring. If so, open your backups from this folder and go through steps 2 to 4 to find a file before your problem occurring.
    6. When you find a file, copy it to the root of your current profile folder and name it, "sessionstore.js.
    7. Open Firefox. Mine opened upwards as you wish.

    It is a solution for Windows. Sorry I can't comment on other platforms, but I'd bet it's just a copy of file and change of name, it is likely even.

    For Windows users, you can find you must sign out and sign in as administrator in order to access backups. You must not logoff your standard account, but do have Firefox closed as described above.

    Hope that helps.

  • tabs and groups of tabs are lost

    Closing Firefox and then restarting him, invariably all my tab groups seem to have lost their legs. Reopening of groups of Eve extended or closed (using the Group Manager add-on tab) will not help.

    It is not happened on my previous install but have since upgraded to Kubuntu 14.04 and Firefox 29 (to be precise Firefox to canonical 1.0), I keep losing my tabs and groups of tabs.

    Don't know what mistake I make.

    In case you use "clear history of Firefox closing:

    • do not erase browsing history

    Note that compensation "Preferences of Site" clears all exceptions for cookies, images, pop-up windows, installation of software, passwords, and other specific data from Web site.

    You can check for problems with the sessionstore.js and sessionstore.bak files in the profile folder of Firefox that store session data.

    Rename (or delete) the sessionstore.js file and possible sessionstore-# .js files with a number and sessionstore.bak in the Firefox profile folder.

    Delete sessionstore.js will cause App Tabs and groups of tabs open and closed tabs (back) to get lost and you will have to re-create them (take note or bookmarks if possible).

  • Telephone calls from a man saying that he worked for Microsoft and he had problems in my area

    A man rang today saying that he worked for microsoft and he had problems in my area and if I turned on my computer it will help solve the problem. ???

    It was an international call, but I said that I had not reported any problems. What is going on???

    Relatively new user to the computer

    Hello

    Its a SCAM!

    In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
    Watch groups. Arm yourself with knowledge.

    No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
    computer. So that's the fraud or scams to get your money or worse to steal your identity.

    Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
    phone calls to help you fix your computer
    http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

    Scams and hoaxes
    http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

    Microsoft Support Center consumer
    https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

    Microsoft technical support
    http://support.Microsoft.com/contactus/?ws=support#TAB0

    Microsoft - contact technical support
    http://Windows.Microsoft.com/en-us/Windows/help/contact-support

    I hope this helps.

  • Suddenly can't access local users and groups permissions list

    In computer management (my computer / manage) "Local users and groups" icon has a red x on it and when I click on it I get this message:

    Local users and groups
    Unable to access the computer {computer name} toa. The error was: library not registered.

    How can I find which library is not registered, so I can register?

    BTW, this is one of several very similar problems that began to arrive after the last update of Microsoft Windows Vista.

    Hello GCCarvill,

    Thanks for posting your question in the Microsoft answers Forum.

    If you have a system restore point, before applying the updates would be the fastest way to restore the library file
    who is missing. Use the following article to restore to an earlier point in time. Don't forget to create a manual restore point before using an earlier version of the operating system.

    936212 KB - how to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
    http://support.Microsoft.com/kb/936212

    You can also create a manual system restore point so that you can restore in case of problems.
    How to create a system restore point manually:
    Right-click on the computer icon in the desktop, then choose Properties
    In the left pane, click System Protection
    Alternatively, to directly access the System Protection tab, click Start and type SystemPropertiesProtection.exe.
    If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    Click the System Protection tab and then click on create.
    In the System Protection dialog box, type a description, and then click on create.

    After the search for the other forums, I found another user having a similar problem. They used a tool called FileMon and after comparison, they discovered a file called activeds.tlb was missing. They have restored a copy in the system32 directory and
    was then able to access the local users and groups successfully. You can download a copy of FileMon of:
    http://www.sysinternals.com

    If please reply back and let us know if it helped to solve your problem or if you need further assistance.

    Thank you

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Win 7 Pro - all users in local users and groups

    Hello I have a new install of Windows 7 Pro with two users; Administrator (built in) and my personal user (CCzahor). I can connect to windows very well with both users.  When I right click my computer and manage them, there is no user appearing in "users and groups / users.  However, if I go to groups, double-click 'Administrators', I see Director listed, and I see CCzahor under "users".  In addition, when I run lusrmgr.msc, I see the same thing as described above, but when I run netplwiz.msc, I see the admin and CCzahor displayed in the list.

    It is not functionally a problem, but rather a nuisance than anything else.  Any ideas?

    Hello

    Please provide a detailed description of the issue.

    I understand the inconvenience you encountered. I will certainly help you with information.

    Note: Users and groups is located in computer management. A collection of administrative tools that you can use to manage a local computer or a remote computer. Please see the link below.

    Local users and groups overview

    https://TechNet.Microsoft.com/en-us/library/cc770756.aspx?f=255&MSPPError=-2147217396

    Important: Under local users and groups, you must click users to see users and groups. And if the two accounts you have in the system have administrator permissions, it's going to be reflective under the administrator group.

    I hope this information is useful.

    Please provide us with the information above to help you best.

    Thank you.

  • Not the users and groups folder under computer management

    Original title: no access to users and groups in Windows 8 Pro

    Right click on computer, select Manage

    There is no option in the management of the computer!

    WHY? How to view?
    Thank you
    Hi Johnny,.
     

    Looks like you are unable to get users and groups under computer management.

     
    I would like to gather information to help you:
     

     
    (1) how do you try to locate users and groups under computer management?
    (2) you are able to view other folders in the same section?
    (3) don't you make changes to the computer before this problem?

     
    I suggest you to check if the steps will help you to locate users and groups folder under Computer Management:
     

    (a) Windows and X set button, and then select computer management.
    (b) double click on system tools.
    (c) click on local users and groups.
    (d) check if you are able to find users and groups folder.
     
    Do we not respond with the status of this issue.

  • How do I give users access to the addition of other users and groups in weblogic * without * giving administrator rights

    Hello

    Before opening a SR Oracle for the same problem, just wanted to put it out there to see if we can provide a non administrator user access to the Weblogic administration Console so that it can log and ONLY add users and groups, but not change any setting in the administration console. We offer a personalized access? All grain specific to be accessible?

    Please don't give me the links where it says "give read-only access", giving "monitor."

    read only user cannot add new users/groups in the administration console. The administrator credentials can be provided to that user. It just has to be able to connect, go to security domains > myrealm and add new users and groups. nothing else.

    Please let me know.

    Thank you

    Dan

    Thanks Christian.

  • Right users and groups cannot be found

    Hey all,.

    I have a problem with a gentle version of the last vCAC and when it comes to adding users and groups to the rights, I find it is blindly with the users and groups that it is and that it allows me to add even if I used some of the users and groups for other configurations and it worked properly just seems to be the right that really gives me worth.  Anyone seeing this and if so what did you do to go beyond that?

    Thank you

    Steve

    Hey steve,

    You have these users and groups added to the corresponding business group?

    BR,

    MG

  • Get details of username and group of companies of Workflows Hadoop

    Hi people,

    We are able to deploy Hadoop Clusters successfully using vCAC - vCO integration. We strive to update the database with information such as the user name (who asked the Hadoop Cluster), company of the etc group, the problem is, we are not able to make the username and group business Details of the vCAC through the Hadoop Workflows in vCO. These details are the entries, attributes, nor outputs... However, the details are displayed. But, when the workflow starts we get details such as ID username and group of companies in vCO on the 'Variables' tab (shown in the image below).  Is there a way we can save this information?

    System.log (__asd_tenantref); -does not work.

    I think that these values are updated automatically through vCAC when the deployment of the cluster is started. Is there a way we can track this information?

    Thank you

    SK

    (In the picture below, those highlighted is the required information)

    For these variables, please use this package: com.vmware.library.asd.package

  • Sorting and grouping - two months in this query

    Hi all

    Thanks a lot for JAC

    I am doing a project for the construction company, I faced this problem by grouping points according to the relationship between these points the
    Relationship is from 1 to 100. If the point between what means there is relationship between these points has come.

    resolve this question already, but the results does not correct when the table contains more data.

    SQL - sorting and grouping.
    Jac and thanks a lot to him.

    This example for more details

    for example, I have these points
    id   location         percentage   comments 
1     loc 1,2          20%                that mean point  1 and 2 close to each other by 20%
2     loc 1,3          40%              that mean point 1 and 3 close to each other byy 40%
3     Loc 8,6          25%               that mean point 8 and 6 close to each other by 25% 
4     Loc  6,10        20%
5     LOC 11,10        10 %
6     LOC 15,14         0%
    In addition, we can see the relationship between these points as follows
    -points 1,2,3 in a group why because close 1.2 and 1.3 a relationship which means 1.3 also hid the relationship.
    -Points 6,8,10,11 in the second group there are the relationships between them.
    - but no relationship between 1, 2 or 3 with any point of 6,8,9,10,11
    -as well as no relationship between 15, 14, which means 14 in the third group and 15 in the fourth group.


    Whati need?

    to group the points that growing a relationship according to the percentage value


    The most important part is to group the points. For EXAMPLE, the query below, the gropuing is not correct.

    I have the following table with data
    drop table temp_value; 
create table temp_value(id number(10),location varchar2(20), percentage number(9)); 
 
 
insert into temp_value values  (1,'LOC 1,2',10); 
insert into  temp_value values (2,'LOC 1,3',0); 
insert into  temp_value values (3,'LOC 1,4',0); 
insert into  temp_value values (4,'LOC 1,5',0); 
insert into  temp_value values (5,'LOC 1,6',0); 
insert into  temp_value values (6,'LOC 2,3',0); 
insert into  temp_value  values(7,'LOC 2,4',0); 
insert into  temp_value values (8,'LOC 2,5',30); 
insert into  temp_value values (9,'LOC 2,6',0); 
insert into  temp_value values (10,'LOC 3,4',0); 
insert into  temp_value values (11,'LOC 3,5',0); 
insert into  temp_value values (12,'LOC 4,5',40); 
insert into  temp_value values (13,'LOC 4,6',0); 
insert into  temp_value values (14,'LOC 6,7',40);
insert into  temp_value values (15,'LOC 7,2',0);
insert into  temp_value values (16,'LOC 8,2',60);
insert into  temp_value values (17,'LOC 8,3',0);
insert into  temp_value values (18,'LOC 3,1',0);
insert into  temp_value values (19,'LOC 9,6',30);
insert into  temp_value values (20,'LOC 11,2',0);
insert into  temp_value values (22,'LOC 12,3',10);
insert into  temp_value values (23,'LOC 19,3',0);
insert into  temp_value values (24,'LOC 17,3',0);
insert into  temp_value values (24,'LOC 20,3',0);
    When I used this query, the results is not correct

     with t as
    (select percentage,loc1,loc2,sum(case when percentage = 0 then 1
                       when loc1 in (l1,l2) then 0
                   when loc2 in (l1,l2) then 0
                   when l1 is null and l2 is null then 0
                   else 1
              end) over(order by rn) sm
    from (     select id,location,percentage,
                       regexp_substr(location,'\d+',1,1) LOC1,
                      regexp_substr(location,'\d+',1,2)  LOC2,
                     lag(regexp_substr(location,'\d+',1,1))
                      over(order by percentage desc) l1,
                      lag(regexp_substr(location,'\d+',1,2))
                      over(order by percentage desc) l2,
              row_number() over(order by percentage desc) rn
      from temp_value
      order by percentage desc
        )
  )
   select loc,min(sm)+1 grp
     from(
       select loc,rownum rn,sm
       from(
       select percentage,decode(rn,1,loc1,loc2) loc,sm
       from t a,
            (select 1 rn from dual union all
             select 2 from dual ) b
       order by percentage desc,decode(rn,1,loc1,loc2) asc
      )
   )
    group by loc
   order by min(sm),min(rn);
    results


    SQL > /.
    LOC                         GRP
-------------------- ----------
2                             1
8                             1
6                             2
7                             2
4                             3
5                             3
9                             4
1                             5
12                            6
3                             6
11                           13

LOC                         GRP
-------------------- ----------
19                           14
17                           15
20                           22

14 rows selected.
    SQL >


    but the just is
    Location        group No
2                  1
8                  1
4                  1
5                  1
1                  1
6                  2
7                  2
9                  2
12                 3
3                  3
19                 4
17                 5
20                 6
    Thanks in advance.

    Published by: Isabelle on November 30, 2012 03:07

    OK, I thought an it once again and found out how to include with any such percentage points.
    In your example expected output you missed the 11 that's why we got 7 groups now.
    The order of the Group 2 and 3 is ambiguous, because the highest percentage of these groups is the same.

    with connects as (
select distinct
 loc1
,loc2
,connect_by_root(loc1) grp
,percentage per
from
temp_value
--start with
--percentage != 0
connect by nocycle
(prior loc2 = loc1
or
prior loc1 = loc2
or
prior loc1 = loc1
or
prior loc2 = loc2)
and
percentage != 0
and
prior percentage != 0
)

select
 loc
,dense_rank() over (order by decode(per,0,1,0), grp) grp
from (
select
 loc
,max(grp) keep (dense_rank first order by per desc, grp) grp
,max(per) keep (dense_rank last order by per nulls first) per
from (
select
 loc1 loc
,grp
,per
from connects
union
select
 loc2
,grp
,per
from connects
)
group by
loc )
order by 2,per desc,1

LOC     GRP
2     1
8     1
4     1
5     1
1     1
12     2
3     2
6     3
7     3
9     3
11     4
17     5
19     6
20     7

    Think we are done now ;-)
    Edited by: chris227 at 30.11.2012 16:46

    Edited by: chris227 at 30.11.2012 17:12
    order corrected

    Edited by: chris227 at 30.11.2012 17:15
    simplification, no need to rank in linking subquery

    Edited by: chris227 at 30.11.2012 17:26

  • automatically generated GROUP BY problem

    I Autogenerate GROUP BY clause and Synchronize it checked by increment, (really good service, thank you!) and noticed some problems.

    (1) by typing SELECT A, B, COUNT (*) from a causes GROUP BY must be generated, taking a. causes a second GROUP BY must be generated. Ending with:
    SELECT A, B, COUNT (*) of a. Group by group by A, B A, B

    (2) the first element of the list does not appear to be updated:
    SELECT moo, cow, count (*) cow group by moo, cow;

    If I add a one for the cow, the clause is updated. If I add a one-for-moo, however, is not.

    Thanks Brian, fixed.

  • Cases and Group by

    I tried to understand what is the problem with a large sql query that does not change what I do.
    Have managed to isolate the part which is a failure, but I get the error message:

    ORA-00979: not a GROUP BY expression

    is not very useful.

    I suspect there is something fundamentally wrong in what I'm trying to do.

    I had to anonimise the names of the tables and fields that the data that I use is quite sensitive, but it should not forget the problem.

    Here is the query:
    select
case when a='100' and cost in (select cost from lookup) then '100' else b end as main,
count(*)
from 
data_table
group by 
case when a='100' and cost in (select cost from lookup) then '100' else b end
    DATA_TABLE has (among others) of fields:
    a, b, and the cost

    search contains the field:
    cost

    All fields are VARCHAR2 (255)


    If I remove the count (*) and any group of the query statement runs it is to say:
    select
case when a='100' and cost in (select cost from lookup) then '100' else b end as main
from 
data_table
    This shows that the stated case is valid - then why I can not combine the count and group of?
    If this is a reason of syntax is there another solution that I can possibly use subqueries to work around the problem - I prefer to avoid this and can't really make the case in a decoding without him make mess.

    Oracle version:
    Oracle Database 10g Enterprise Edition Release 10.2.0.3.

    TIA

    Published by: user8378443 on May 11, 2011 10:26

    Try like this,

    SELECT MAIN, COUNT (*)
  FROM (SELECT CASE
                  WHEN A = '100'
                   AND COST IN (SELECT COST FROM lookup)
                  THEN '100' ELSE b
               END
                  AS MAIN
          FROM data_table)
GROUP BY MAIN

    G.

  • ORACLE ADMINISTRATION TOOLS - MANAGE SECURITY AND THE VARIABLE - PROBLEM

    To manage security, I use an external "DIM_DMT_PRIVILEGE" table with 3 columns: user, Type and value

    I created a block of initialization in the variable management section named 'CATEGORY' by the next expression of inititialisation:

    SELECT "CATEGORY", DMT_VALUE_CD
    OF DIM_DMT_PRIVILEGE T
    WHERE T.DMT_TYPE_CD = 'CT '.
    AND)
    High (T.DMT_USER_CD) = upper ('VALUEOF (NQ_SESSION.) THE USER) ")"
    OR T.DMT_USER_CD in ('VALUEOF (NQ_SESSION.) (GROUP)')

    The problem is that the initialization state * "upper (T.DMT_USER_CD) = upper ('VALUEOF (NQ_SESSION.)" "USER)") "* success but the other *" or T.DMT_USER_CD in ('VALUEOF (NQ_SESSION.) GROUP) ")" * don't.

    In the external table, the column user contain users and groups of users, security groups, and users.

    Thanks for your help,

    Kevin

    Hello

    In your select statement, you must use the name of the database table columns and not the names of the variables defined in the initialization block.

    Looks like you used the names of variables in a query, if I understand correctly.

    According to my understnading, you must use...

    SELECT DMT_TYPE_CD, DMT_VALUE_CD
    OF DIM_DMT_PRIVILEGE T
    WHERE T.DMT_TYPE_CD = 'CT '.
    AND)
    High (T.DMT_USER_CD) = upper ('VALUEOF (NQ_SESSION.) THE USER) ")"
    OR T.DMT_USER_CD in ('VALUEOF (NQ_SESSION.) (GROUP)')

    It will store these values corresponding to you first two variables defined in the initialization block.

Maybe you are looking for