With 2 monkeys roaming network connected to the internet

Hello

My apologies if this has been discussed (I did some search but did not find anything useful). I have the question realted following a change in my network topology:

current installation:

-Cable modem is connected to the WAN port on my Time Capsule (3 TB Tower). Transport CANADA acts as DHCP unit (modem is silent, that is without router)

-Port LAN of the TC is connected to the WAN of the MONKEY #1 via CAT6 Ethernet port.

-MONKEY port LAN #1 is connected to the WAN of the MONKEY #2 port

-Port LAN EPA # 2 is connected to the WAN of the MONKEY #3 port

-all the monkeys (the latest models of Tower) Act in Bridge mode, but create a WLAN.

I like that, a roaming welll workign network throughout the House.

New installation / planned:

-J' changed from cable to fiber to the home. So now I have a new box of fiber that offer Internet via 4 Gigabit Ethernet ports.

-The new fiber box is physically located between the TC and the #1 MONKEY.

-without having to pull a new cable in the box of fiber for the TC (for feed on the Internet in the beginning of the string), I was thinking about this:

-1 Ethernet cable from fiberbox to the TC and feed the Internet through another Ethernet into the WAN port on the #1 MONKEY in the remaining string.

-Switch the TC using the Bridge so that the fiber box making the DHCP

However, now the TC is is more directly connected to the chain of the EPA.

QUESTIONS RELATING TO THE:

-I'll always be able to have a mobile network, or I will with 2 networks, i.e. 1 created by TC and 1 piloted by monkeys?

-all Clients on the network will see always shared devices (printer, for example) on the network?

Thank you very much for your expert advice on this.

Rgds,

Sascha

-run 1 Ethernet cable from fiberbox to CT...

-Switch the TC using the Bridge so that the fiber box making the DHCP

It should work.  (See Note below)

feed the Internet through another Ethernet into the WAN port on the #1 MONKEY in the remaining string.

It should work. (See Note below)

However, now the TC is is more directly connected to the chain of the EPA.

Since the TC is connected to Ether even switch on the product of the fiber to which EPA #1 is also connected... TC and AE #1 are, indeed, also linked together.

I'll always be able to have a roaming network

Yes

-all Clients on the network will see always shared devices (printer, for example) on the network?

Yes, assuming the fiber box works properly.

Important note... Your plan to have the TC and the MONKEY in Bridge Mode expected to work... BUT... Apple has another idea on how a mobile network should be configured. See the information on a roaming network in this Apple support document:

Wi - Fi base stations: extend the reach of your network wireless by adding additional base stations Wi - Fi - Apple Suppo...

More precisely... Apple will tell you to connect an Ethernet cable from the product of the fiber to the WAN on the TC port and set the TC for managing DHCP and NAT... just as it does now.  Then... all the rest would be put in place just as you have it now... with a connection Ethernet between a LAN port on the TC to the WAN on EPA #1, LAN on EPA to WAN on EPA #2 #1, etc..

If you follow the advice of Apple... you'll get an error Double NAT on your network... Apple who will tell you to ignore. How well your network will work with a Double NAT problem is open to question.

I don't recommend to follow advice Apple... just pointing out that Apple has different ideas and interesting on how to do things, which sometimes goes against the traditional rules of network management.

Tags: Wireless

Similar Questions

  • I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection.

    I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection. It connects to other networks wifi very well with Internet access, is that the wireless in my house what it connects to. When I diagnose the problem, it says "Cannot communicate with DNS server (208.67.222.222)", and then under that it says: "languished network diagnostics remote hosts, but had not received a response." It connects to the Internet through an ethernet cable, but it is rather annoying pulling the cable autour. I currently have Windows Vista Home Premium. Thank you!

    original title: Internet connectivity problem

    Hello

    Now, you may need to contact the support of Panda Internet Security centre to change the settings so that wireless is enabled through it.

    Support link: http://www.pandasecurity.com/homeusers/support/

  • I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. I use downgrade XP on vista.

    I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. Usually, you must configure only once and his game, but I have to keep on my new Dell Precision 6400 reconfigure it. I use downgrade XP on vista.

    Hi Susancav,

    Welcome to Microsoft Windows Forums!

    I'll be your message to the category of xp windows for a better answer. You can always find your message by going to my Threads in the section My Forum links at the top right of the page. http://www.Microsoft.com/windowsxp/expertzone/newsgroups.mspx

    Thank you and best regards,

    Bindu S - MICROSOFT SUPPORT
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • System hangs after upgrade to 'Windows 8 preview version' to 'Of Windows 8 preview with media center version' when connected to the Internet

    I use "Windows 8 preview version" for the last 4 months.

    I recently updated the system 'Windows 8 preview with media center version', but my system hangs after each start and restarts.
    It works only when I disconnect from an Internet connection. Once I connect to the internet, the system shows new blue screen. Now, I don't even have a system restore to go back to the previous configuration.
    I want to use internet on a system without the system get crashed, please help me solve this problem.
    I am using Dell Inspiron 15R

    The minidump files display a stop error message DPC_WATCHDOG_VIOLATION (133) referencing the netio.sys:

    BUCKET_ID: 0x133_DPC_NETIO! StreamInjectRequestsToStack

    The netio.sys is a Windows driver that is involved in the "networking."

    The process that crashes regularly is avgnsa.exe which is a process of AVG.

    I would say to uninstall AVG and see if the accidents to solve.

    He also seems to be a remnant of a previous installation of Trend Micro (tmtdi.sys) driver.

    If you had previously installed Trend Micro plan to run the following Trend Micro removal tool:

    http://esupport.trendmicro.com/pages/How-do-I-Remove-Old-or-New-versions-of-Trend-Micro-Products-in-My-COMP.aspx#.

    If you're running Windows 8 pre-release version of the software consider using just the built-in Windows and antivirus software firewall rather than any third-party antivirus or firewall software.

  • My laptop with Windows Xp does not connect to the internet, please help me!

    Then my laptop, as indicates it works on Windows Xp, but even if I'm supposed to be connected to my home network, when I run Internet Explorer, it can not connect to internet. Any help and insight will help. Please help me!

    I'm sorry that had to retype all of this, but in essence, that everything indicates that things work correctly with your Internet connection.

    To translate, the first bit tells us that your router assigned your computer 192.168.0.12 IP address.  The own IP address of the router is 192.168.0.1

    The result of ping 127.0.0.1 indicates that your computer can communicate with itself (the adapter is OK)

    The 192.168.0.12 ping result indicates that your computer can communicate with your router (that we already knew because otherwise your computer don't would not have been assigned an IP address).  It also means that you are connected to your local network.

    The result of the ping 192.168.0.1 is similar to the 127.0.0.1 test.

    And finally, the ping Google result shows that you are able to access the Internet.

    Knowing all this, you probably need to reset TCP/IP or Winsock, or both.

    Manually:

    Open a command prompt window and type

    netsh winsock reset {enter}
    netsh int ip reset c:\resetlog.txt

    Or see these two articles from Microsoft, include the two "FixIt" links
    How to reset Internet Protocol KB99357 How to determine and recover from Winsock corruption 811259 KB 2

  • Connectivity of the Internet with Windows 7

    I have a desktop computer with Windows 7 installed and a laptop with Windows Vista installed.  I access the internet via a wireless network.  Installed with Windows 7 computer has network connectivity, but not internet - diagnosis suggests that the problem is that with the internet connection to the modem, however, my laptop has network connectivity and the internet.  What is the cause with the desktop internet connectivity problem?  What can I do to fix this?

    Dumbo,

    Many people have difficulties to internet connection as a result of the recent update to Win7.  It has nothing to do with their AV. applications

    The update KB2705219 is said to be, the cause and uninstalling has resolved the problem at least a user [who did not provide more details, he comes to say it was fixed].

  • Unable to connect to the internet via the Time Capsule 2 TB router

    Hello

    I can't connect wireless to the internet using my Time Capsule (see 7.7.3 running).

    I mainly use a macbook air (so no ethernet jack) running El Capitan 10.12.2 but the problem also occurs with our iPad and iPhone.

    The system has worked for a few hours after the initial Setup, but our ISP crashed and I was not able to make it work since their entry online. I've used a Linksys router.

    ISP is done via a wireless connection. The provider can see my antenna and an Apple device connected to it. I have a static IP address with DNS assigned.

    My airport utility shows green for the network connection and the internet but no Web page will open.

    I did reset hard and reconfigurations a few times which one where I left the modem to the router cable disconnected until I got the full configuration.

    The wireless network is using DHCP with DNS assigned to a beach.

    Router mode is DHCP and NAT.

    Any ideas would be appreciated.

    There are a number of situations where the TC will simply not work.

    I have a static IP address with DNS assigned.

    If you have configured the Internet of TC tab with static IP address?

    Would it not be possible to get the address IP via dhcp... have you tried?

    Wireless modem is connected by ethernet to your TC? Also, the modem is a router that is bridged?

    I really need to see the numbers... but it's not good to put the public IP address here... xxx on the first two bytes and just give me the rest... as long as the IP and gateway are the same.

    Or send it to my email address. (see my profile).

    Your linksys might work, but the CT will not... This happens because Apple does not provide sufficient flexibility to allow the wireless Internet service provider. (Or Satellite or fiber or some ADSL).

    But it can also be a problem with the network... we have problems with the WAN port with some modems.

    Does the ethernet connectivity light come on, when you connect the modem to the WAN port on the TC?

  • Unable to connect to the internet from Vista PC

    The computer was working fine, but today when I booted up it would no longer connect to the internet. My WiFi works and I can connect with other computers on my network without problem. The connection is listed as work, but with limitations, but nothing can connect to the internet. I tried the ip in cmd mode config, but it does not work anyone help?

    Hello

    Thanks for sharing the information. In case, if you need help, you can always after your questions related to Windows and your valuable suggestions in the Windows forum.

  • I have five Airport extreme with their network of people names different location home.  I have a brighthouse router that I use to connect to all the extremes of the airport.  I experienced the problem of connection to the internet.

    I have five airport extreme, with their network of people of names in a different location in the House.  I have a brighthouse router that I use to connect to all the extremes of the airport.  I experienced the problem of connection to the internet.

    Are all connected to the Brighthouse router by Ethernet extremes? Are all of the extremes configured as bridges?

  • XP sp2 can not find networks (wifi) also connect to the internet. No problem with router as Vista works fine

    my old machine is broken down and wiped xp sp2 off the drive. I fitted another harddrive and reinstalled from xp disc. Installation was bad, so bought a new drive, the Installation went like in a dream, but my computer cannot find all the networks. The wifi dongle works ok (tested on vista) the router isworking well on my vista machine (find 7 networks) parameters must be wrong or the new installation was not so good Mmm tried to reinstall 4 times with the same result.

    Hello

     

    Thanks for asking!

     

    You can't connect to the internet.

     

    1. do you receive any error messages?

    2 what is brand and model computer?

     

    The question may be because the network drivers.

     

    To check that I suggest to visit:

    In Windows network connection issues

    http://support.Microsoft.com/kb/313242

     

    I hope this helps. If the problem persists, let know us and we would be happy to help you.

     

     

  • You are not connected to the internet! You want to work offline or try again? There is also a box with a red x and the message reads unplugged network cable.

    Unplugged network cable?

    Recently I get this message then on the line. You are not connected to the internet! You want to work offline or try again? There is also a box with a red x and the message reads unplugged network cable. It is very aggravating. Can someone tell me how to solve this problem? It might have something to do with my firewall? I recently downloaded mozzilla firefox if I could play words with friends, because IE would not work on the game.

    Hi LouisteanGriffin,

    ·         Did you do changes on the computer before the show?

    Follow these methods.

    Method 1: Follow these steps:

    Step 1: Start the computer in safe mode with network and check if the problem persists.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

    Method 2: Temporarily disable the security software.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 3: Follow the steps in the article.

    How to troubleshoot a network home in Windows XP

    Windows wireless and wired network connection problems

    For reference:

    How to reset the Protocol Internet (TCP/IP)

  • I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network.

    I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network.  I have Ping www.microsoft.com and the answer is "ping request could not find host www.microsoft.com.  I am connected to the network wireless through my iPad and can connect via my smartphone. This leads me to believe there is only something configured properly on my laptop. Can anyone provide assistance?

    Hello

    You can try a system restore...

    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

    .. .choose time, until this problem (you may tick to show more older restore points).

    Tricky

  • My laptop Vista with Atheros AR5007 802. 11 b / g adapter does not connect to the internet using the local area or wireless network connections

    I just bought a new router d-link wireless n for my house.  Connect my Win 7 Desktop, laptop xp to Acer and multitude of other devices, but my laptop Vista with Atheros AR5007 adapter does not connect to internet.  I tried to disable IPv6, defining the name of the network, flushing dns cache, etc..  Nothing will work.  (It would not connect to an another 802.11n router in January either.)

    I get local only on both connections Wi-wired and wireless, no matter what I do.
    I'll send this to my office that I can not connect my laptop to the internet and he does not see the other machines on the network.
    Any suggestions from anyone?  I spent hours trying to solve the problems, now completely stumped.

    OK, here was my fix:

    I tried a lot of things, but they do not work.  I downloaded a 'new' driver of HP - it turns out it was the original with the problem.  I found another one that was about a more recent months, still does not work.  I finally managed to get the atheros.cz driver for my card files.  But they do not have an installation file.  I had to search for each old file in its directory, copy it to another place (to be sure, just in case) and then copy and replace the old file with the new file in the original folder.  Fortunately, there were only 6 files, but it took about an hour and a half.  This isn't a lot of time compared to the 18 or if I was just trying to figure out the problem.  Now, my laptop connects to the internet without problem.
    I had this problem with a router "n" beginning of the year in a hostel.  The guy in the Inn told me that he had seen before once.  It's obviously a common problem with these cards (as seen on the "solutions" online) and Vista.  I'm always hating on Vista after this problem.
  • Errors in Windows 7 with Windows Help and Support, network connection, and the system restore

    I have a HP Pavilion dv6 (4 years), sometimes overheated with heavy use. Normally I can cool, restart and wear. However, my laptop just overheated and closes, and this time I encounter all sorts of problems.
    First of all, after the reboot, I noticed that the system does not automatically connected to my Wi - Fi (it does not even recognize the available network).
    Secondly, in attempting to fix the network problem, I clicked on the link "Troubleshooting", only to receive the following error message "an unexpected error has occurred. ID of Package cannot continue the Troubleshooting Wizard": unknown path: C:\Windows\diagnostics\system\networking error Code: 0x8007045A

    Third, because troubleshooting did not work, I thought I'd try the help and Support Windows to search for answers. However, when I opened it, I received the following message: "Windows Help and support has encountered a problem. You might be able to solve the problem by restarting Windows Help and Support. If the problem persists, proceed as follows: 1. search the online help on the Windows website.  2. contact your manufacturer of computers or Microsoft Support for assistance. There could be a problem with one or more Windows system files or folders on your computer. "Because I could not connect to the internet, these suggestions and links were useless.

    Fourthly, as I failed to locate the problem, I tried a system restore. However, after he appeared to run (took about 30 min) and restarted Windows, the following message appeared: "system restore was not entirely successful. The system files and settings on your computer did not change. Details: System Restore could not access a file. This is probably because an antivirus program is running on the computer. Temporarily disable your antivirus and restart System Restore. An unspecified error occurred during system restore. (0x80070005)
    You can try the system restore again and choose a different restore point. If you continue to see this error, you can try an advanced recovery method. For more information, see what is recovery? "I have disable my antivirus (AVG), tried and received the same error message.

    Short physically all my backup files and restore to factory settings, I think I've exhausted what I can do.

    * EDIT * after scouring the site, I found a suggestion to run the tool via the command prompt System File Checker (see thread here: http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/no-internet-connection-on-this-computer-after/83fb22c9-712e-467d-9a68-f8d52dde9bcb), which I did and found some corrupted files. The following response appears: "Windows Resource Protection found corrupt files and repaired successfully details can be found in the CBS.log newspaper... File system changes will take effect after the next reboot. "After restarting, the internet connection problem seems to have been resolved. Service work. and Windows Help and Support also works! I hope it helps someone else!

    Hi Lorenacadi,

    Thanks for sharing of the resolution. Your efforts and patience are highly appreciated.

    In addition to the emission of heat:

    Two things inside the laptop generate heat - power (in the place where the power cord plugged in) and the processor.  The CPU has a heater and a fan to help disperse the heat and keep the CPU at a reasonable temperature.  Hot air is sent on the vents, and air at room temperature between in other events.
    What happens generally is dust forms near the vents, near the Airways within the laptop computer which lead to the mouths and on the CPU fan itself.  All these sources of dust cause airflow slow down, so that the hot air lingers and gets even hotter.  To resolve this problem, you will need to take the laptop apart and 'very good' to clean the dust and the CPU fan.

    Another potential source of heat which would be composed of dust problem might be software related.  More 'work' the CPU must do the most energy is needed and therefore more heat is released.

    Keep us in case you have questions/suggestions more associated with Windows.

  • Unable to connect to the internet and have problems with the help of program network Toshiba

    Original title: I can't go on the internet?

    I try to go online to check my bank account and net work of toshiba program will not cone upward on my screen.i have a blank page.

    Hi Alice,.

     

    Please join Microsoft Community where you can find the necessary information on Microsoft products!

    You are unable to connect to internet and unable to use a Toshiba network program.

    1. what browser do you use?

    2 are you able to open other sites?

    3. Once you get a white page?

    4. do you get error messages when you try to open the site to the Bank?

    5 did you do changes on the computer before the show?

    6. who is the program of Toshiba network you're talking about?

    To work the issue with cannot connect to the internet:

    Method 1:

    See the site:

    The problems of Internet connection

    http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-Internet-connection-problems

    Note: Apart from using the Internet connectivity evaluation tool, all the other steps are applicable to Windows 7 as well.

    To work the issue with Toshiba program:

    Method 2:

     

    Reinstall the boot program:

    Step 1: Clean boot

    When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

     

    Check out the link:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.

    Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

    Step 2: Uninstall the program

     

    See the site:

    Uninstall or change a program

    http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

    Step 3: Install the program

     

    If the problem persists, then you try to get help on the Toshiba forums site:

    http://forums.Toshiba.com/

    I hope this helps. If the problem persists, let know us and we would be happy to help you.

     

     

     

Maybe you are looking for

  • can I change my old trackpad and replace Force touch trackpad on my macbook pro... it's going to work?

    can I change my old trackpad and replace Force touch trackpad on my macbook pro... it's going to work?

  • Impossible to get websites to use respective SSL certificates

    Mac OS 10.10.5 Server 5.0.15 I have a question where the default web site ("Server (SSL) Web site" ") is in conflict with the SSL certificates for my three other SSL sites. The configuration of my website (Note: server IP is 192.168.1.100) Web Server

  • Microsoft Digital Media Keyboard 3000 bilingual

    I am running WIN Vista Home Premium 64 Bit and installed Microsoft Digital Media Keyboard 3000 bilingual using English.  Whenever I use the keyboard, it starts to type French after only a few minutes and I don't know how to change it back to English.

  • Cannot telnet ASA VPN remote

    Hello I set up a VPN between two sites using two cisco asa. The VPN works perfectly, but I can not telnet, ssh or run ASDM on the ASA remote, that is, if I'm on LAN 1, I can not telnet, ssh or run ASDM on ASA2 and vice versa. Just to test, the entire

  • BSOD and video artifacts

    Hello. I have HP Compaq 8710p Notebook with NVIDIA Quadro NVS 320 M. Two days ago it started crashing whenever I'd run any type of 3D application/game. She even crashed a few times in NVIDIA Control Panel when he wants to make the small logo rotating