With audio buttons

Similar Questions

• Progress bar when audio plays on a slide with the button

  Hello

  I use 6 Captivate.

  I have a zipper opening for my demo that introduced the demo. This slide contains 1-3 minutes of audio. On this slide, I have a standard button named 'Start', that the learner must click Start the demo (which is on the next slide). I also have a PlayBar with rewind, Play/Pause, Back, Next buttons and Audio.

  Once the project starts, the Play/Pause button on the playback bar turns into mode 'Play '. This, I believe, is an expected behavior because of the presence of the 'button '. However, it causes me problems because, if the learner clicks on the 'Play' button (instead of the start or next buttons) after the end of the audio to the slide of the opening, the progress on the playback bar bar moves for the duration of the audio, so that nothing changes on the screen.

  Is it possible that I can:

  1. Move the progress bar with the button Play/Pause in "Pause" mode when opening, slide audio playback and switch to 'Play' mode once the audio ends? In this case,.

  a. If the learner pauses the audio by clicking Pause and then click on Play, it must continue with the audio.

  b. If the student click on the play button after the audio ends must take sound to the next slide.

  2. turn off the Play/Pause button so that the learner will not click on it?

  I don't want to hide the PlayBar on this slide as I want to give the Rewind option to the learner so play the audio again if he / she wants.

  Anthony

  A colleague found an easier solution than the one I was talking about earlier.

  He just moved the point to pause the start until the end of the slide button. Now, the progress on the playback bar bar moves with audio and the Play/Pause button passes in "Play" mode when audio stops at the end of the slide. On clicking the play button, the project will move to the next slide.

• Problems with audio/video streaming with USB devices on zero clients

  Hello:
  We are using view 6.1.1 in our environment and problems getting audio/video streaming to work well with the USB headsets, with zero customers.  Helmets are Jabra Link 360 and customers zero Samsung NC241.  Helmets are used as well for the phones to Jabber and also as audio device by default.   We started with the audio driver Teradici and everything seemed to work well, except that users could not answer calls on the headset itself with the button on the headset.  They were able to answer the calls of Windows though and the part worked fine.  In order to get the physical button to work, we had to first fill the USB receiver they use on the zero clients so that Windows will see as the device Jabra 360 and not the audio device Teradici.  Then we had the EHCI USB mode on them as well, and after that he started to work very well.  However, the helmets also serve as the audio device main as well as the communication (phone) device, with audio streaming continuously throughout the day.  With the current configuration, audio streaming will cut in and out during the day, and audio/video is not always to stay in either phase.

  I also applied the registry in this KB hack, VMware KB: improvement in audio quality when you use speakers or USB headsets with a desktop VMware view Horizon 5.2 , which helped clear up Crackle that we originally with the part phone headsets.  But there is still the issue of streaming audio.

  I wonder if the effectiveness of the bridging USB is not as effective and also is there a way to make this work better?  I read that the use of the pilot Teradici is supposed to help with audio/video problems, but do not know how that can be applied to USB devices as we use.  I've been reading upward on Teradici audio/video settings, but do not know where to go from there.  I was hoping that there are some best practices to use USB headsets with a view, but so far I'm not finding anything useful.

  For any help or suggestion would be greatly appreciated.  Thanks in advance.

  We were finally getting help by the people of Cisco after validation in the here and even open a support ticket with VMware, which was open for more than a month without will.  Where others try to implement similar, here are our findings:

  • Zero clients combine traffic USB and PCoIP.  It is not good when there is a lot of audio/video/USB traffic, especially the USB headsets that also carry audio softphone.  In our case, the USB traffic was so dense that it was causing audio and video become troubled and freeze and eventually cause the pcoip_server service to break in the virtual machine itself and cause the client disconnect.  The fix?  Don't use customers zero with USB phones software, they are not just designed for this type of solution.
  • Thin clients are much better designed for USB softphones.  In our case, we used the Cisco VXME client, which is the method of support for the use of Windows thin clients with the client of the Horizon.  There is integration between the two products that isolates the VOIP traffic out of the virtual machine and keeps it local on the client itself.  Regular audio and video traffic still go through the virtual machine using Teradici or VMware RTAV driver.

  Hope this helps others who may run this question.  One thing we did not try was a wired headset using the AV sockets on the zero client and Teradici audio driver.  This can work, but our needs here were the headphones must be bluetooth, so we were forced to stick with USB.

• I have no "audio" button in the window "fusion clips".

  Hi all

  I have Premiere Pro cs6 and want to connect a video et an audio with each other .
  but in the window of " fusion clips " lack of le Audio button ,

  which is shown in many tutorials , to make it is automatically synchronized.

  The video has audio of the camera.

  Is it a tool?

  thank you very much for your answer
  Andreas
  

  Audio sync is a feature that is new in PPr CC.  Make sure you look for tutorials for CS6.

  If you are considering upgrading, be sure to download the trial, first.  Audio synchronization works exactly 0% of the time for me to CC7 and 7.0.1.  I have not yet updated to 7.1, but I have no reason to believe that a fix has been addressed it is.

• Cp6: How to stop a slide with several buttons in a nonlinear presentation?

  Hello

  I would be very grateful for a solution to this issue, as I failed to find one yet in this forum.

  The presentation is non-linear, which means that the first slide is a kind of menu that you can choose another slide to explore and always comes back to the first.

  Each slide has several buttons that activate different audio files, and there is a button on the arrow in the lower right corner to jump to the first slide.

  The problem is that the slide does not stop after that you click on some of the audio buttons and continue on the next slide (instead of take a break until the user clicks on the arrow button). When I click a few buttons and listen to audio, eventually the slide automatically continues to the next slide.

  I tried:

  • Add button click box with "break project up to what the user clicks
  • change all the buttons for timing-> break after...
  • change only the arrow for Timing-> button pauses after...
  • and will not take unnecessarily long time to slide

  Any ideas?

  Thanks in advance,

  The best

  Acted

  You don't say 'how' to play the audio? In any case, the default behavior of interactive objects that trigger a simple action is out the read head. If you replace the simple action by a standard tip action one line, the playhead is not released. Watch this video (posterous is down once, again can not point to my blog):

  http://www.YouTube.com/watch?v=M3nKi-DB6Fw

  Lilybiri

• give the user an option to use with audio or without audio

  How to give the user to use published.exe with no audio and audio options?

  If they want with audio just click audio or without audio

  IM using captivate 5.5

  Win 7

  There is a mute on the playback bar button.  All the user has to do is click here to disable audio.  If you have done the captioning text and it synchronized with the audio, it will always show even if the sound is muted.

• Suspension audio button

  Hello to you all,.

  I use Captivate 4 to create slides in which I want to add a button to an audio file. When the user presses the button, the audio would be played and repeated as many times as necessary, but without changing the blades. The audio is in MP3 format.

  Thanks in advance.

  Hello

  There are certainly ways to do that, maybe try this one:

  1. Create a box to highlight (if you don't want it to be visible, when appears, the value border and fill the color of the background)
  2. In the properties of this HB set him invisible (Options tab)
  3. Always in the properties, Audio tab, attach the audio file
  4. Create a button on the slide (visible); as an action "on success", choose 'Show' and the box to highlight

  When you click on the button on the box highlight will appear (possibly invisible by choosing the right colors) and play the audio. But after playing, there will be a jump to the next slide. I understand that you want to the slide to break again and that the user will be able to play the audio again? I hope that you use CP4? A simple way to do this:

  1. Add a very short slide (0, 1 sec) before dragging it with the Audio button
  2. Add the 'Back' button on the slide, make sure what he done a break later than the first button (to play audio) and join the action "Go to previous slide" on success
  3. Create a tip Action, e.g. labelled "BackAction": with only one action to hide the nail box again. Necessary because you cannot run an action of 'skin' coming out a slide
     1. Hide THighlightBoxItem1
  4. Attach this AA 'BackAction' out of the Audio slide
  5. Think you also need to add a third button 'Continue' to exit the loop and make the leap to the next slide.

  Hope this was clear enough, tried and it works.

  Lilybiri

• Help with Audio using the DD Realtek Audio Manager

  Hi all
  
  I recently bought a new computer and tried today for the first time to record audio to one of my movies.
  
  On my old computer, there is no problem, but now that I bought a gateway that has this installed Realtek HD Audio Manager, I can't save.
  
  When I click on the audio button, the guest comes telling me that he will have to establish levels of microphone.
  
  Usually when I talk, it turns green and everything is correct.
  
  Now, nothing.
  
  Is there something with this software Realtek or the passage system which does not allow me to register?
  
  Thank you
  PAM

  Hi, Pam

  I'm not sure how to put it in terms you understand fully, but I'll try.

  When the computers are made, there are certain pieces of equipment which perform the tasks we ask them. This material is provided by different manufacturers. For example, you use a computer brand Gateway, but the internal circuit and the equipment are supplied by different manufacturers. Then gateway buys components from all over the place. And in this case, the manufacturer of the audio component is called RealTek. Audio material can be hard connected directly to the motherboard or it could be a separate and external expansion card that connects to the motherboard via a slot.

  Any hardware component normally requires a component of special software called a 'pilot' to help the operating system (Windows) understand how to work with the material. The driver can also reside in a few different places. It can be supplied on a chip on the motherboard or the expansion card, or it can also exist as a file that is installed in the operating system. Or it could be a combination of the two.

  so, in this case, RealTek is the manufacturer of a specific type of audio material. Unfortunately, no version of Captivate include how to work with the material provided by the manufacturer. The really unfortunate part of all this is while Captivate has problems with it, other software happily works just dandy and won't complain a bit.

  So the answer to the part of your question, is that if you remove any aspect of your software from RealTek, kill you also probably the audio capabilities of your computer. In other words, that no sound would work under Windows or any other software. Regarding the installation of other software that would work, you would seek to eventually buy an extra sound card. Disable the RealTek hardware and install the new card and its associated drivers. And even then, there is no guarantee that it would work with Captivate or even Windows. (My son continued his tail for a literally weeks trying to make a sound card to work in an old PC)

  As you can see, taking that approach is much heavier and more involved that it would be just maybe start Windows Sound Recorder or Audacity, record your audio clip and save it. Then in Captivate, import it into the project.

  What a pain that you would have to work this way? You're talking about. But until developers can so why some material works and some does not, it is what we are facing. For what it's worth, we see a similar problem with Captivate not reliable detection and work with a Headset Microphone that connects via the USB port.

  I hope this was helpful... Rick

• I'm new on El Capitan.  Window, emerged that says 994 issues found with a button to click to start the repair.  What is a legit Apple window?

  I'm new on El Capitan.  An arisen window that says 994 found subjects (files duplicated, System & unwanted internet, recoverable unauthorized software & disk space) with a button to click to start the repair.  What is a legit Apple window?

  Not enough information. Please be more complete. It would also help if you can provide a screenshot of this:

  To post a screenshot

  1. Press command + shift + 4, that will change the cursor to the line of sight.
  2. Hold down the mouse button and the collimator allows you to select the part of the screen you want to capture.
  3. Release the mouse button and the image will be saved on your desktop.
  4. Click on the camera icon in the toolbar of the message forum Editor.
  5. Drag the image on the button select a file and click the Insert button.

• I removed Applian freecorder in my programs, but I find myself with a toolbar of community with a button for Freecorder help page. How can I get rid of this, preferably on the entire toolbar

  I installed and now have uninstalleda Applian program (freecorder I think) but find myself with a toolbar of community with a button leading to the theFreecorder help page. I don't want the additional toolbar or button. How can I get rid of him? I tried to remove and reinstall Firefox, but this has not done it.

  Hello

  Please try to go to Tools (or Alt + T) > modules, Extensions , click on the left and if it is listed on the right, delete it. Otherwise, you will need to go to Add/Remove Programs in the Control Panel of BONE and remove it from there.

• How to get the original look of firefox 4 with "firefox button" on the road to top then bookmarks with the address bar... ?

  I've been using firefox 3.6.16 and just upgraded to version 4 yesterday evening. in fact, the problem is this, in my browser that "firefox" button and all tabes are displayed in the same way on top.

  what I want is to get the default appearance of firefox 4 with firefox button on top and all of the tabs that appear on located below this button... (not in the same way)

  I manage because of any parameter of preference or other? Help, please

  If the Firefox window is maximized, it displays the tabs of the same line that the Firefox button, it just displays them on a separate line on a window not optimized in terms.

• Stop the loops with a button

  I have an infinite loop is and display of data. How can I end the loop with a button or a keypress?

  Periodically perform a ProcessSystemEvents() call inside the loop. In a reminder of the STOP button, set a flag to indicate your loop to stop.

  stop unsigned int = 0;

  While (! stop) {}

  data getmeasured

  display the data

  ProcessSytemEvents()

  Sleep (250);   to be polite: it is impolite to spinlock, since you will monopolize the CPU and other threads can get hungry

  }

  then, in the reminder for a STOP button

  STOP the button callback routine

  stop = 1;

• HP Envy 17: How to re - activate the audio buttons feature beats?

  I bought a HP Envy 17 laptop about a year and a half ago. The laptop has a physical volume digital dial with a button of beats in the Middle:

  

  He changes volume by turning the wheel and opens the control panel of beats when you press the button in the middle.

  When I got to the laptop, I disabled voluntarily the button because I didn't like the chart he put on-screen whenever I changed the volume:

  

  Now I am trying to re - activate but I don't remember how I disabled it. Any suggestions?

  Hello

  Probably the easiest solution is to download and reinstall the HP OSD utility at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55152.exe

  Kind regards

  DP - K

• I created a 'film' in Windows Movie Maker with audio. I'm now trying to burn on a DVD in windows DVD creation, but the program will change the order of my photos. What I am doing wrong?

  I took pictures of a Picasa folder and created a "slideshow" with audio in Windows Movie Maker. It's over, but when I try and save it to a dvd using windows DVD create, change the order of my photos are randomly. Am I missing a setting? What I am doing wrong?

  It may be interesting to try to publish (Save) project in the. Film WMV
  format in a folder on your hard drive. Then import them. WMV file in
  Creating Windows DVD.

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - Edition
  http://www.Papajohn.org/Vista-publishing.html

• Switch Cisco 2960/3560 = > recovery password and default settings with the button Mode

  Hi Experts,

  I have some confusion with the button Mode with cisco 2960/3560 switches.

  I read on many forums and articles, but where things are not clear.

  a place given 3 seconds and somewhere is given 7 or 10 seconds.

  Qus1), what is the exact time to press/hold Mode button to perform two following tasks:

  A. password recovery (according to my knowledge 3 sec) good or bad?

  Configuration of the switch (start + run) would be safe

  After the recovery of password? Yes or no

  B. factory default (according to my knowledge 10 dry) good or bad?

  I'm afraid, because if I press mode button more than 3 seconds, then

  It will delete any configuration of cisco switch. Yes or no

  Qus2) I want to recover the catalyst 2960/3560 switch password without

  Start/run configuration to lose. That is my main concern.

  Please tell me how to do this, what will be the time keeping Mode buttom

  in a few seconds?

  Qus3) which means this line

  "If the password recovery mechanism is disabled in switch

  then you will lose all the config.

  This sentence has been given on this forum url

  https://supportforums.Cisco.com/thread/140848

  KS

  Attach a terminal or PC with terminal emulation (for example, Hyper Terminal) port console switch.

  Use the following terminal settings:

  • Bits per second (baud): 9600

  • Data bits: 8

  • Parity: None

  • Stop bits: 1

  • Flow control: Xon/Xoff

  Note: For more information on the wiring and connection of a terminal to the console port, refer to connecting a Terminal to the Console Port of Catalyst switches.

  Unplug the power cable.

  The power switch and take it to the switch: command prompt:

  2900XL, 3500XL, 2940, 2950, 2960, 2970, 3550, 3560, and 3750 switches of the series, to do this:

  Press and hold the mode button located on the left side of the façade, while you reconnect the power cable from the switch.

  2960, 2970

  Release the Mode button when the SYSTEM LED flashes orange and then turns green. When you release the Mode button, the SYSTEM LED flashes green.

  3560, 3750

  Release the Mode button after about 15 seconds when the SYSTEM LED turns green. When you release the Mode button, the SYSTEM LED flashes green.

  The system was interrupted before the flash at the end file system initialization

  loading the operating system software:

  flash_init

  load_helper

  boot

  switch:

  Run the flash_init command.

  switch: flash_init Initializing Flash... flashfs[0]: 143 files, 4 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 3612672 flashfs[0]: Bytes used: 2729472 flashfs[0]: Bytes available: 883200 flashfs[0]: flashfs fsck took 86 seconds ....done Initializing Flash. Boot Sector Filesystem (bs:) installed, fsid: 3 Parameter Block Filesystem (pb:) installed, fsid: 4 switch: !--- This output is from a 2900XL switch. Output from !--- other switches will vary slightly.

  Run the load_helper command.

  switch: load_helper switch:

  Question the dir flash: command.

  Note: Be sure to type a colon ":" after the dir flash.

  Appears in the file system of the switch:

  switch: dir flash: Directory of flash:/ 2    -rwx  1803357                  c3500xl-c3h2s-mz.120-5.WC7.bin !--- This is the current version of software. 4    -rwx  1131                     config.text !--- This is the configuration file. 5    -rwx  109                      info 6    -rwx  389                      env_vars 7    drwx  640                      html 18   -rwx  109                      info.ver 403968 bytes available (3208704 bytes used) switch: !--- This output is from a 3500XL switch. Output from !--- other switches will vary slightly.

  Type rename flash: flash: config.old config.text to rename the configuration file.

  switch: rename flash:config.text flash:config.old switch: !--- The config.text file contains the password !--- definition.

  Issue the boot command to boot the system.

  switch: boot Loading "flash:c3500xl-c3h2s-mz.120-5.WC7.bin"...############################### ################################################################################ ###################################################################### File "flash:c3500xl-c3h2s-mz.120-5.WC7.bin" uncompressed and installed, entry po int: 0x3000 executing... !--- Output suppressed. !--- This output is from a 3500XL switch. Output from other switches !--- will vary slightly.

  Enter "n" at the prompt to abort the initial configuration dialog box.

  --- System Configuration Dialog --- At any point you may enter a question mark '?' for help. Use ctrl-c to abort configuration dialog at any prompt. Default settings are in square brackets '[]'. Continue with configuration dialog? [yes/no]: n !--- Type "n" for no. Press RETURN to get started. !--- Press Return or Enter. Switch> !--- The Switch> prompt is displayed.

  At the switch prompt, type en to enter a mode.

  Switch>en Switch#

  Password recovery

  Type rename flash: config.old flash: config.text to rename the configuration file with its original name.

  Switch#rename flash:config.old flash:config.text Destination filename [config.text] !--- Press Return or Enter. Switch#

  Copy the configuration file in the memory.

  Switch#copy flash:config.text system:running-config Destination filename [running-config]? !--- Press Return or Enter. 1131 bytes copied in 0.760 secs Sw1#

  The configuration file is now reloaded.

  Replace the current passwords that you do not know. Choose a password with at least one capital letter, one number and one special character.

  Note: Replace passwords that are required. You must crush not all passwords listed.

  Sw1# conf t !--- To overwrite existing secret password Sw1(config)#enable secret !--- To overwrite existing enable password Sw1(config)#enable password !--- To overwrite existing vty password Sw1(config)#line vty 0 15 Sw1(config-line)#password Sw1(config-line)#login !--- To overwrite existing console password Sw1(config-line)#line con 0 Sw1(config-line)#password 

  Write the running configuration in the configuration file with the write memory command.

  Sw1#write memory Building configuration... [OK] Sw1#

  For factory reset:

  do not give under the control of factory reset

  Switch#copy flash:config.text system:running-config

  can I copy the running configuration to Flash

  Switch flash running-config #copy:

  Destination file name [running-config]?

  Building configuration...

  [OK]

  Switch #copy running-config startup-config

  Name of destination file [startup-config]?

  Building configuration...

  [OK]

  Review the link for more information below

  http://www.Cisco.com/en/us/products/hw/switches/ps628/products_password_recovery09186a0080094184.shtml

  Please note the useful messages.

  Concerning
  Vesta
  "Everybody is genius." But if you judge a fish by its ability to climb on a tree, he will live his entire life, believing that this is stupid. "