With Informatica error when loading data for BI applications running

Similar Questions

• Member not found error when loading data

  Hi all
  I created a data load file and load the data for the cube of the Regional service. I saw some members all values of measure zero as shown below:
  
  '1018' 0 0 0 294.4739236
  "1019" 0 0 0 0
  
  Data is loading properly for Member '1018' but for '1019', even if it is already present in its lines, its raise an error, as shown below:
  
  +------Member 1019 not found in the database.
  
  
  Please help me solve this problem...
  
  Thanks in advance
  
  
  Kind regards
  Lolita

  Hi Lolita,.

  Are you sure have first '1019' member in the sketch?
  Right-click in the map and find the 1019 member. If you are able to track, then check that the mapping rule files is correct or not.
  Also, try to load the data for another combination for the same Member.

• Get the error when loading data into the base cube

  Hi all
  
  I get the error by loading the file of hollow data to the database below.
  Please take suggest me...
  
  I use ESSBASE 9.3.1.3.
  
  
  Error:
  
  Basic charge database
  The Xchgrate database management
  Load the database Interntl
  Sample application loaded - connection established
  Start the application [example] with the process id [1688]
  Empty invalid character in name (E:\My personal Data\Test\222.txt) based on the ESSAPI EssUpdateFile
  Unexpected error Essbase 1030010

  Empty invalid character in name (E:\My personal Data\Test\222.txt) based on the ESSAPI EssUpdateFile

  Essbase has problems with spaces (white space characters) the path names (my personal data)

  Rename your path or move the data file to a location that has no characters/spaces in the path name.

• Calculate the usage data for specific applications running

  Hi all

  How to find how much data usage is made by different applications running.

  that is to find what different application network traffic.

  Concerning

  Stephenson

  ApplicationManager for the first.

  not possible for the second.

  for a bes-enabled device, you can use statistical server-side

• Error when loading data from a file XML using HTTPService

  Hi all

  I have a runtime error that made me beat right now I am building an App in Flash Builder 4 to run on AIR.

  The error is as follows: TypeError: Error #1009: cannot access a property or method of a null object reference.

  What I'm doing:

  I have 2 DropDownList controls, the first is filled with the names of countries and the other with the language options.  All 1 DropDownList control

  set to an image control to display the flag of the country and activate the 2nd DropDownList.

  The 2nd DropDownList control sets the returned variable equal to the language code.  I then call the function in the language and pass it returned .  using this variable, I build the string

  for langFilePath will be equal to the XML file (which is "Lang_GBR.xml") location on my desktop and then call the HTTPService.

  As soon as the function of language is called, the runtime error occurs and highlights the line with btn_LS_mainMenu.label = loadLangService.lastResult.Lang.GlobalTags.btnMenu;

  When I try to assign the label of button with a new value in the XML file.

  I suspect that maybe it's a trivial mistake, but I can't see it at the moment.

  Any help or advice would be appreciated.  Thank you

  Code:

  <fx:Script>
          <![CDATA[
                 
                 [Bindable]
                 public var langFilePath:String;
  
                 public var langDir:File = File.desktopDirectory;
                 public var langCode:String;
                 
                 public function countrySelect_changeHandler(event:IndexChangeEvent):void
                 {
                      switch (countrySelect.selectedItem)
                      {  
                           case ('United Kingdom'):  
                                trace("Item Selected was: "+ countrySelect.selectedItem);
                                img_countryFlag.source = AngolaFlag;
                           break;
                           case ('France'):  
                                 trace("Item Selected was: "+ countrySelect.selectedItem);
                                 img_countryFlag.source = AustraliaFlag;
                           break; 
                           default:  
                           break;
                       } 
                      langSelect.enabled = true;
                      trace("1st dropdownbox");
                 }
  
                 
                 public function langSelect_changeHandler(event:IndexChangeEvent):void
                 {
                      switch (langSelect.selectedItem)
                      {                                          
                           case ('English'):  
                               trace("Language Selected was: "+ langSelect.selectedItem);
                               langCode = "Lang_GBR";  
                           break;
                           case ('French'):  
                               trace("Language Selected was: "+ langSelect.selectedItem);
                               langCode = "Lang_FRA";  
                           break;
                      }
                      language(langCode);
                  }
  
                 public function language(aParam:String):void
                 {
                      trace("Code Was: " + aParam);
                      trace("Lang dir: " + langDir.nativePath);
           
                      langFilePath = langDir.nativePath + "/" + aParam + ".xml";
           
                      trace("File to load: " + langFilePath);
                      trace("loadLangFile.url: " + loadLangService.url);
                      loadLangService.send();
                      
                      btn_LS_mainMenu.label = loadLangService.lastResult.Lang.GlobalTags.btnMenu;
                 }
            ]]>
  </fx:Script>
  
  
  <fx:Declarations>
       <s:HTTPService id="loadLangService" url="{langFilePath}"/>
  </fx:Declarations>
  
  
  <s:DropDownList x="10" y="201" id="countrySelect" prompt="Please Select Your Country" width="274" enabled="true" change="countrySelect_changeHandler(event)">
  
  <s:DropDownList x="10" y="348" id="langSelect" prompt="Please Select Your Language" width="274" enabled="false" change="langSelect_changeHandler(event)">
  
  

  Not sure on your XML structure, but for now I see the problem here between these 2 lines of code:

  loadLangService.send();
                   
btn_LS_mainMenu.label = loadLangService.lastResult.Lang.GlobalTags.btnMenu;


  Data do you your httpService supposed to receive just cannot go so fast to fill the lastResult before calling it in the following line

  Try to add a listener to result at your service before sending:

  .....

  loadLangService.addEventListener (ResultEvent.RESULT, handler);

  loadLangService.send();

  ......

  function handler(event:ResultEvent):void {

       btn_LS_mainMenu.label = loadLangService.lastResult.Lang.GlobalTags.btnMenu;

  }

• Cannot find the file error when loading data from text file to Oracle

  Hello
  
  I have an interface where I am loading a data from the text file to Oracle.
  But when I try to do that I am getting following error.
  
  ODI-1227: SrcSet0 (load) task fails on the source FILES SAPMM connections.
  Caused by: java.sql.SQLException: file not found: d:/mdb/#General.get_filename
  to com.sunopsis.jdbc.driver.file.FileResultSet. < init > (FileResultSet.java:160)
  at com.sunopsis.jdbc.driver.file.impl.commands.CommandSelect.execute(CommandSelect.java:57)
  at com.sunopsis.jdbc.driver.file.CommandExecutor.executeCommand(CommandExecutor.java:33)
  
  SAPMM is the name of the connection.
  I use get_filename to get the name of the file and it is fetching a correct value as long as this variable is updated in the previous stage of this interface.
  KM, used for loading is SQL file
  
  What would be the cause of this error?
  
  Thank you
  Mahesh

  Also a single query would be ok if I'm moving only generated package (according to your scenario3) scenario and not UI? It running properly?

  Yes... It runs successfully

• ODI error when loading data from Oracle to Essbase

  Hello and happy new year to everyone!
  
  I can't load some data from an Oracle table to an Essbase database. The Oracle table has all the members of the Essbase database, columns, and in addition, it has a column for data.
  
  I use the IKM SQL for Hyperion Essbase (DATA) as IKM and I can't choose a LKM in the dropdown, but I imported the LKM SQL to SQL.
  
  Error thrown is:
  
  org.apache.bsf.BSFException: exception of Jython:
  Traceback (innermost last):
  "< String >" file, line 23, in there?
  com.hyperion.odi.essbase.ODIEssbaseException: error reached records the maximum error threshold: 100
  at com.hyperion.odi.essbase.ODIEssbaseDataWriter.loadData (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)
  at java.lang.reflect.Method.invoke (unknown Source)
  at org.python.core.PyReflectedFunction.__call__ (PyReflectedFunction.java)
  at org.python.core.PyMethod.__call__ (PyMethod.java)
  at org.python.core.PyObject.__call__ (PyObject.java)
  at org.python.core.PyInstance.invoke (PyInstance.java)
  to org.python.pycode._pyx10.f$ 0 (< string >: 23)
  to org.python.pycode._pyx10.call_function (< string >)
  at org.python.core.PyTableCode.call (PyTableCode.java)
  at org.python.core.PyCode.call (PyCode.java)
  at org.python.core.Py.runCode (Py.java)
  at org.python.core.Py.exec (Py.java)
  at org.python.util.PythonInterpreter.exec (PythonInterpreter.java)
  at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
  at com.sunopsis.dwg.codeinterpretor.k.a (unknown Source)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting (unknown Source)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (unknown Source)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (unknown Source)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (unknown Source)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt (unknown Source)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (unknown Source)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (unknown Source)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession (unknown Source)
  at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (unknown Source)
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (unknown Source)
  at com.sunopsis.dwg.cmd.e.i (unknown Source)
  at com.sunopsis.dwg.cmd.g.y (unknown Source)
  at com.sunopsis.dwg.cmd.e.run (unknown Source)
  at java.lang.Thread.run (unknown Source)
  
  Caused by: com.hyperion.odi.essbase.ODIEssbaseException: error reached records the maximum error threshold: 100
  at com.hyperion.odi.essbase.ODIEssbaseDataWriter.sendRecordArrayToEsbase (unknown Source)
  ... 32 more
  
  com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: error reached records the maximum error threshold: 100
  at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
  at com.sunopsis.dwg.codeinterpretor.k.a (unknown Source)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting (unknown Source)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (unknown Source)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (unknown Source)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (unknown Source)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt (unknown Source)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (unknown Source)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (unknown Source)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession (unknown Source)
  at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (unknown Source)
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (unknown Source)
  at com.sunopsis.dwg.cmd.e.i (unknown Source)
  at com.sunopsis.dwg.cmd.g.y (unknown Source)
  at com.sunopsis.dwg.cmd.e.run (unknown Source)
  at java.lang.Thread.run (unknown Source)
  
  
  
  I'll wait for any help.
  
  Thank you!

  First of all, I would highly recommend the upgrade because there were a few bugs with the adapters of Hyperion.
  If you set MAXIMUM_ERRORS_ALLOWED to 0 it will be infinite, so it will not stop because of rejected records.

  Once you assign to LOG_ENABLED and LOG_ERRORS Yes
  then you LOG_FILENAME together and ERROR_LOG_FILENAME, put them in a known example location c:\temp on windows.

  Ok?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Error while loading data file with using a file of rules through a MAXL.

  I think that the functionality to generate a. Records error during loading data in the ERR file is supported only if there is a. RUL file being used.
  
  Is this good?
  
  I tried to get. ERR files to generate by using the following statement:
  Import database PL_RPT. Reprting data data_file
  "E:\Hyperion\AnalyticServices\APP\PL\PL.txt" to load_buffer with buffer_id 17
  Error writing to "E:\Hyperion\Scripts\Pln\Logs\LoadlData.err."
  
  When I run this, if there are errors, it is not generated any file errors and stops the load.
  
  I saw the technical reference Essbase ASO MAXL data loading and code syntax diagram indicates that it is supported.
  
  Any suggestions will be greatly appreciated.
  
  Thank you

  Hello

  Here are a few suggestions for trapping errors. I hope that one of them will meet your needs:

  1._____________________________________________

  spool to 'D:\logs\maxlresults.out ';

  function SIERREUR 'WRITE_ERRORS ';

  / * do stuff * /.

  Define the label 'WRITE_ERRORS ';
  spool off;
  spool to 'D:\logs\maxlerrors.out ';
  "exit";

  2._____________________________________________

  coil stdout to "D:\logs\maxlresults.out."
  coil stderr to "D:\logs\maxlerrors.out."

  3._____________________________________________

  essmsh script.msh 2 > D:\logs\maxlresults.out

  Robb

• Event ID: 7024 with error message: "the Windows Firewall service stopped with the error service specific data are invalid.

  Original title: cannot start Service Windows Firewall: Error Code 13

  Hello.

  Anyway, the Action Center has begun randomly telling me that the Windows Firewall is disabled. When I try to start or return to the default settings, it tells me that it is not able to do.

  I went to Services and Windows Firewall is set to automatic, but it is not started. I try to start it and it tells me that it is not able to do the same. The error code is 13.

  I am an administrator.

  MalwareBytes did find and delete a virus named "Disable.SecurityCenter", but after removing that I am still unable to start the Service.

  Can someone help with this problem?

  Edit: The journal ID is 7024 and description:

  "The Windows Firewall service stopped with the error service specific data are not valid... '. ».

  Hello, Connor

  You can try to perform a system restore to before that the problem started. For instructions on how to proceed, see the following ink: System Restore: frequently asked questions

  You can also try running a SFC scan to check (and repair) system corrupt/modified files. To do this, go to start, all programs, accessories, click with the right button on command prompt and choose Run as administrator. In the command prompt, type the following command and press ENTER: SFC/scannow

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem loading data for Planning Server through ODI

  Hi all
  
  I am facing problem while loading data for Planning Server through ODI.
  I created the interface with flat as a source of data as file below
  
  Location data load Cube name POV cost per seat
  Ctbn_PnL of Tidel Equifax, Budget, Working_2010, FY10, Wk1, Local 333
  Ctbn_PnL of Tidel Equifax, Budget, Working_2010, FY10, Wk2, Local 444
  Ctbn_PnL of Tidel Equifax, Budget, Working_2010, FY10, Wk3, 555 Local
  Ctbn_PnL of Tidel Equifax, Budget, Working_2010, FY10, Wk4, Local 666
  Budget, Working_2010, FY10, Wk5, Tidel Equifax, Local 777 Ctbn_PnL
  Ctbn_PnL of Tidel Equifax, Budget, Working_2010, FY10, Wk6, Local 888
  Budget, Working_2010, FY10, Wk1, PADI Ctbn_PnL Equifax, Local 222
  Budget, Working_2010, FY10, Wk2, PADI Ctbn_PnL Equifax, Local 111
  Budget, Working_2010, FY10, Wk3, PADI Ctbn_PnL Equifax, room 345
  Budget, Working_2010, FY10, Wk4, PADI Ctbn_PnL Equifax, Local 346
  Budget, Working_2010, FY10, Wk5, PADI Ctbn_PnL Equifax, Local 347
  Budget, Working_2010, FY10, Wk6, PADI Ctbn_PnL Equifax, Local 349
  
  And the target as an application of Planinng. Interface has been properly executed, but are not filled with data in the form of Plannning or Essbase.
  I obtained the information in the log file after running the interface:
  
  2010-05-20 18:45:38, 409 [DwgCmdExecutionThread:null:5] INFO: Oracle Data Integrator adapter for Hyperion Planning - free 9.3.1.1
  2010-05-20 18:45:38, 409 INFO [DwgCmdExecutionThread:null:5]: connection for application [PnL_ODI] [chnveltss03]: [11333] using [admin] username.
  2010-05-20 18:45:39, 800 [DwgCmdExecutionThread:null:5] INFO: successfully connected to the planning application.
  2010-05-20 18:45:39, 800 INFO [DwgCmdExecutionThread:null:5]: loading for the charge of planning options
  Name of the dimension: location like Parent child: false
  Order By entry charge: forgery
  Update the database: true
  2010-05-20 18:45:39, 815 INFO [DwgCmdExecutionThread:null:5]: beginning of the loading process.
  2010-05-20 18:45:39, 815 DEBUG [DwgCmdExecutionThread:null:5]: number of columns in the result set of source does not match the number of columns planning targets.
  2010-05-20 18:45:39, 831 [DwgCmdExecutionThread:null:5] INFO: type of load is a [member of the load dimension].
  2010-05-20 18:45:39, 831 [DwgCmdExecutionThread:null:5] ERROR: file [[Tidel, null, null, null, null, null, null, null, null, null, null, null, Ctbn_PnL, Budget, null, "Equifax, null, null, null]] has been rejected by Planning Server.
  2010-05-20 18:45:39, 831 [DwgCmdExecutionThread:null:5] ERROR: file [[Tidel, null, null, null, null, null, null, null, null, null, null, null, Ctbn_PnL, Budget, null, "Equifax, null, null, null]] has been rejected by Planning Server.
  2010-05-20 18:45:39, 847 [DwgCmdExecutionThread:null:5] ERROR: file [[Tidel, null, null, null, null, null, null, null, null, null, null, null, Ctbn_PnL, Budget, null, "Equifax, null, null, null]] has been rejected by Planning Server.
  2010-05-20 18:45:39, 847 [DwgCmdExecutionThread:null:5] ERROR: file [[Tidel, null, null, null, null, null, null, null, null, null, null, null, Ctbn_PnL, Budget, null, "Equifax, null, null, null]] has been rejected by Planning Server.
  2010-05-20 18:45:39, 847 [DwgCmdExecutionThread:null:5] ERROR: file [[Tidel, null, null, null, null, null, null, null, null, null, null, null, Ctbn_PnL, Budget, null, "Equifax, null, null, null]] has been rejected by Planning Server.
  2010-05-20 18:45:39, 847 [DwgCmdExecutionThread:null:5] ERROR: file [[Tidel, null, null, null, null, null, null, null, null, null, null, null, Ctbn_PnL, Budget, null, "Equifax, null, null, null]] has been rejected by Planning Server.
  2010-05-20 18:45:39, 847 [DwgCmdExecutionThread:null:5] ERROR: file [[Padi, null, null, null, null, null, null, null, null, null, null, null, Ctbn_PnL, Budget, null, "Equifax, null, null, null]] has been rejected by Planning Server.
  2010-05-20 18:45:39, 862 ERROR [DwgCmdExecutionThread:null:5]: file [[Padi, null, null, null, null, null, null, null, null, null, null, null, Ctbn_PnL, Budget, null, "Equifax, null, null, null]] has been rejected by Planning Server.
  2010-05-20 18:45:39, 862 ERROR [DwgCmdExecutionThread:null:5]: file [[Padi, null, null, null, null, null, null, null, null, null, null, null, Ctbn_PnL, Budget, null, "Equifax, null, null, null]] has been rejected by Planning Server.
  2010-05-20 18:45:39, 862 ERROR [DwgCmdExecutionThread:null:5]: file [[Padi, null, null, null, null, null, null, null, null, null, null, null, Ctbn_PnL, Budget, null, "Equifax, null, null, null]] has been rejected by Planning Server.
  2010-05-20 18:45:39, 862 ERROR [DwgCmdExecutionThread:null:5]: file [[Padi, null, null, null, null, null, null, null, null, null, null, null, Ctbn_PnL, Budget, null, "Equifax, null, null, null]] has been rejected by Planning Server.
  2010-05-20 18:45:39, 862 ERROR [DwgCmdExecutionThread:null:5]: file [[Padi, null, null, null, null, null, null, null, null, null, null, null, Ctbn_PnL, Budget, null, "Equifax, null, null, null]] has been rejected by Planning Server.
  2010-05-20 18:45:39, 878 [DwgCmdExecutionThread:null:5] ERROR: Record [[null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null]] has been rejected by Planning Server.
  2010-05-20 18:45:39, 878 [DwgCmdExecutionThread:null:5] INFO: planing cube refresh initiated.
  2010-05-20 18:45:44, 284 INFO [DwgCmdExecutionThread:null:5]: planning of the cube refresh operation completed successfully.
  2010-05-20 18:45:44, 284 INFO [DwgCmdExecutionThread:null:5]: load the process is complete.
  
  
  Please help me in this grace,
  Srinivas

  You are right. The table that you have described is in the format 'Generation' (the highest to the lowest level of the hierarchy). The KM of planning requires data to load in format "Parent/child". You must create multiple interfaces (one for each pair of generation) or use a view to make the transformation.

  While a view seems to be the easier choice, note that ODI will not be able to perform any analysis of lineage of data on the integration process.

  Hope this helps,
  Matt

• Get the error while loading data

  Hello
  
  I get an error when loading the data in the database demo Application based on Essbase 11.1.1.3. I used the format during the loading of the data below
  'Stereo"-Tab-"Boston"-Tab-"Actual"-Tab-"Jan"-Tab-"Sales"-Tab-"100 '.
  But when I try to open this text file in the rule file it said - empty character in the name. No idea what's wrong I do.
  
  The hierarchy of the Demo.Basic database as below:
  Year
  -T1
  -Jan
  Market
  -East
  -Boston
  Product
  -Audio
  -Stereo
  Account
  -Profit
  -Margin
  -Sales
  Scenerio
  -Real
  
  Thank you

  Where is saved the file? I believe that this is the error message you get if you save the files in a folder such as My Documents, in which you will notice a space between my and Documents. Try to save your file in a directory where there is no space such as C:\Hyperion.

  See you soon,.
  Mehmet

• Need data files and rules file to create and load data for sample.basi

  I need emergency data files to build dimensions dynamically and also the rule files for loading data to the application Sample.Basic for Essbase 9. Kindly let me know if anyone can provide them. Otherwise any link frm where I can get it?
  
  Thanks in advance.

  Outline and all the data (calcdat.txt) are included in the zip, so you don't need to rebuild something with the loading rules

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• ENT-06954: error when displaying BIBean for Cube Dataviewer.

  Hello
  I need urgent help.
  I'm building a cube, ROLAP using OWB 11 g. First of all it works, but after 2 days when I want to display the data cube, by using the data viewer I get this error. Please help me.
  
  ENT-06954: error when displaying BIBean for Cube Dataviewer.
  ENT-06954: error when displaying BIBean for Cube Dataviewer.
  
  at oracle.wh.ui.owbcommon.dataviewer.dimensional.CubeDataViewerMain.getDataviewObject(CubeDataViewerMain.java:391)
  at oracle.wh.ui.owbcommon.dataviewer.dimensional.CubeDataViewerEditor._init(CubeDataViewerEditor.java:66)
  at oracle.wh.ui.editor.Editor.init(Editor.java:1115)
  at oracle.wh.ui.editor.Editor.showEditor(Editor.java:1431)
  at oracle.wh.ui.owbcommon.IdeUtils._tryLaunchEditorByClass(IdeUtils.java:1436)
  at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1349)
  at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1367)
  at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:869)
  at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:856)
  at oracle.wh.ui.console.commands.DataViewerCmd.performAction(DataViewerCmd.java:19)
  to oracle.wh.ui.console.commands.TreeMenuHandler$ 1.run(TreeMenuHandler.java:188)
  at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
  at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
  at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
  at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
  at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

  Right to post Forum is here
  [Home forum' Developer Tools' BI beans | http://forums.oracle.com/forums/forum.jspa?forumID=79&start=0]

  HTH
  SS

• Install PT8.53 with Linux question: connection process Data Mover and application designer

  People,

  Hello. I install PeopleTools 8,53 Internet Architecture.

  Server database is the database Oracle 11 GR 1 material.

  Operating system is Oracle Linux 5.

  I installed successfully JDK7, WebLogic Tuxedo 11 GR 1 material and PeopleTools 8,53 10.3.6, in Oracle Linux 5.

  
  I've been setting up of database PeopleTools8.53. Because the Wizard installation problem, I created PeopleTools 8,53 database manually by using starter PT853 Oracle database instance. I have run the following scripts:
  (1) utlspace.sql
  (2) dbowner.sql
  (3) ptddl.sql
  (4) psadmin.sql
  (5) psroles.sql
  (6) connect.sql

  
  Then, we perform Data Mover script in a Windows XP Client computer to fill the PeopleTools PT853 database machine Linux Sever instance.

  I installed Oracle Database 11 g 2 client for 32-bit Windows XP 64 - bit Windows virtual machine and run it successfully.

  In Oracle Linux 5 Server Machine Net Manager:

  Service name: PT853
  Connection type: default database
  "TCP/IP Protocol".
  Host name: 192.168.196.102
  Port name: 1521

  Listener: LISTENER
  Protocol: TCP/IP
  Host: 192.168.196.102
  Port: 1521

  
  I test the Service PT853 with "SYSADM" username and password "SYSADM". The connection is successful.

  In the Windows XP Client computer, the information in the Net Manager is the same, and the connection is successful as well. Its details are as below:

  
  NET Service Name: PT853
  Protocol: TCP/IP
  The host of the database Machine name: 192.168.196.102
  Port number: 1521
  Name of the Basic Service: PT853
  Connection type: default database

  
  This means that Windows XP can connect to Oracle Linux 5 successfully. But in the computer Windows XP Client, Data Mover and application designer cannot open a session in PT853 Instance of database in the Linux Server machine. Its details are below:

  Configuration manager:
  Type of database: Oracle
  The database name: PT853
  User ID: SYSADM
  Connect ID: people
  Connect password: people

  Data Mover:
  Type of database: Oracle
  User ID: SYSADM
  Password: SYSADM

  Application Designer:
  Type of database: Oracle
  User ID: SYSADM
  Password: SYSADM

  When connect Data Mover and application designer, I got the same error:

  ORA - 12154:TNS: can not resolve the connect identifier specified. Invalid user ID and password for the access code.

  According to my understanding, process connection Data Mover and the application designer requires 3 tables in SQL Server: PSOPRDEFN, PSACCESSPRFL, PSSTATUS. I'm not sure the process of connecting to the Oracle database. I checked the database PT853 instance in Linux, and there is only one table "PSDBOWNER" created by the scripts.

  My question is:

  Can any folk tell me the connection process Data Mover and Oracle database application designer? Requires only one table "PSDBOWNER"?

  Thank you.

  Oh my, many mistakes action here. If PSDBOWNER doesn't have a line, it must be solved at the time that the error came out. The replacement by SYSADM first why? Why is complaining already existing SYSADM? Most likely, you HAVE created manually, where you shouldn't.

  Again and again the same story. And again, sorry to say but you should take the basics of Linux training, Oracle training bases and sorry to be hard but reading training as well to read correctly the Peopletools Installation Guide where all required steps are really described in details.

  I don't think anyone can help you across the network in this respect,

  Nicolas.

• I get a download error when you go to the applications tab

  I get an error when I go to the applications tab, when I go to the applications tab, it says download error, please contact customer and I tried to contact them but they do not respond, I'm on a Windows 10 laptop, please help me!

  Please remove Creative Cloud app and Adobe Application manager using

  • https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html