No wireless connection - can not operate the Satellite Pro M40

Similar Questions

• I can build in the Satellite Pro 4600 DVD burner?

  Hiya

  Can anyone help with this? Has anyone equipped with a DVD burner (dvd - rw drive Toshiba sd-r6252)?
  Which models are compatible? I'm good fight opening and Exchange.
  Compatibility just in fact know.
  Thank you

  Hello

  I put t found any information if this drive is compatible with the Satellite Pro 4600, but you should be careful to replace the drive.
  You should check the dimensions of the car. Very important is the drive (master, slave, csel) settings because it is not possible to change this settings as on the usual desktop drive.
  I'm not sure about the settings on the Satellite Pro 4600 but the ASP Toshiba should know that.
  You can also order the caught player supported by the Toshiba service partner in your country.

• Need advice on the Satellite Pro M40

  I wonder if someone could advise me. We just bought 8 smart tips for our school with these I ordered 8 portable computers SatProM40. When I ordered them I checked the spec as follows

  Toshiba SatProM40 - Celeron M360 1.4 GHz - RAM 256 MB - HD 40 GB-CD RW/DVD-ROM combo - Mdm - Lan EN - FAST EN - Win XP Pro - 15.4 "TFT.

  I checked before I ordered that the RAM was 256 because I had heard that it is the minimum recommended to switch to XP.

  Laptops take almost 5 minutes to turn on and everything takes an age to work it's really frustrating and they are totally useless for our school because the entire lesson is included with get the computers to run anything.

  I checked the system information and found laptops were running of 192 MB RAM and rang the provider. I was told that they used 64 MB for the graphics card and that's why they had provided a RAM of 256 MB computer.

  My question to someone who can help:-c' is a normal practice. If I had known this I would have ordered a laptop computer with more RAM to compensate.

  He would welcome any advice that would help us get our children working on their new computers. Thank you.

  Hi Lisa

  In my view, Satellite Pro M40 is nice unit for school work, but I agree with you really is 256 MB minimum RAM and I recommend you buy more 256 MB or 512 MB, depending on your budget.

  The compatible RAM modules are:
  PC2700 256 MB (PA3311U - 2M 25)
  PC2700 512 MB (PA3312U - 2M 51)

  Problem is that this device uses shared memory and that means that RAM will be used also for graphic designers. If there is someone who has a good knowledge of PC that they check all running processes. Many of them are unnecessary and can be disabled. I also noticed that preinstalled Antivir asks (Norton) slow OS quickly. If all units are not connected to the internet I recommend you to remove it.
  By the way: there are many applications of good antivir which works well and don't slow down the operating system currently running.

  Good luck!

• Wireless laptop can not find the wireless Officejet 6700 printer

  My laptop can't find my wireless printer Officejet 6700.  Printer is on the wireless network but the laptop cannot find it.  Laptop the wireless.  Have cisco router on my NBN skymesh satellite.  Have you tried printer setup in the control message panels reads:-printer is not found.  Using windows 7.  Have tried to use scan doctor, turning his router unpluging printer and electrical power to the router. Still no luck.  Printer is about 1 meter portable.  Do I have to set up a home network and connect like that.

  If you can easily plug the printer into the router using an Ethernet cable, who always beats wireless!  Try it!

• Why my wireless router can not access the internet?

  Since my ISP was purchased by another company I had problems to connect to the internet. 8 years with the former ISP I've almost never had a problem and if I did corrected himself very soon. I haven't changed anything on my end, but I get the info. below of Wireless Diagnostics. I hesitate to call the ISP because I don't want it must make changes that can not help and then I have I don't know how to get back to square one. I have tried everything that I read on the subject of internet connections has dropped, but it makes no difference. I use airport Time Capsule as my router wireless because of its 802.11ac technology while the Actiontec AGT784WNV Wireless Gateway is only 802.11n. Thanks for any help you can offer me.

  

  We need a lot of details.

  Perhaps the best way is a screenshot of the page summary of TC...

  That is to say, click on the TC icon in airport utility.

  

  It gives me a lot of valuable information.

  And I'll probably reset you your TC at the factory.

  Since you are concerned to recover the old settings make a backup now.

  Click Edit in the summary page... and in the main menu, click Export configuration.

  

  Now you have a way to restore the settings you... Although I don't think you want instantly.

  If we remove the fear factor that can help.

  If your ISP changes the settings a full reset and reconfigure the TC is usually required.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  Then redo the configuration of the computer that you want to use for TM using Airport utility.

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the wireless is still an issue defined wireless names like TC24ghz and assigned the 5 GHz other name... for example. TC5ghz

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  ** 3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC.

  Ignore this point if you don't understand it... after the return if you drop questions.

  4. be sure that IPv6 is set correctly in the computer. IE link-local only for ethernet or wireless depending on whether you are using. Car is not good enough.

• SanDisk USB Flash Drive & Logitech Wireless Mouse can not find the driver

  I am running Windows XP on a Dell XPS laptop.  When I joined the SanDisk Cruzer Flash Drive or a mouse with Logitech M215 wireless computer detects it and tries to load a driver but just by saying no driver found.  I use other mice wireless and other readers flash without any problems.  I went on the Web from Logitech website and SanDisk and they both say no driver required.  I contacted Logitech and they said it's a matter of Microsoft's operating system.  Where can I get a driver to run both devices.  Also when I go to the hardware profile the other device has a yellow box? next to him.  I try to uninstall the driver and updated it but without success.  Still looking for a driver.  Where can I find the driver.  Help.

  Hello

  1. have you tried plugging it into different USB ports and check?

  2. did you try to use the same flash player and mouse on another computer and check if it works there?

  3. how exactly did you uninstall the driver and reinstall it?

  Connect the hardware (mouse and flash drive) and run the fixit tool in the following article.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  See also:

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?
  http://support.Microsoft.com/kb/314634

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive
  http://support.Microsoft.com/kb/925196

• A Wi - Fi connection does not detect the Satellite L40-139

  Hello!

  I have a problem with the WiFi connection on Toshiba L40-139 Windows XP Professional
  I have all the drivers for this model of the site.

  Also Intel PRO/Wireless 2915ABG: 9.0.4.39 adapter has been installed.
  But during the installation there was an error "could not install the driver.

  If it detects a Wi - fi card by Device Manager
  When I try to connect to the Wi - Fi network, I got a message that it's not all Wi - Fi devices on my laptop.

  Help, please!

  Hello

  As I m wrong not the L40-139 PSL40E does support Atheros 802.11 wireless network card g.
  And that's why you should use and install the Atheros Wlan card driver!

  In addition, you must perform a BIOS update.
  According to some feedback here in the forum, the BIOS update to solve some problems of WLan.

  Check it out & good luck

  Good bye

• Upgrade can not display drivers - Satellite Pro U200-10J

  Hi all

  I recently received a Satellite Pro U200, which I am very satisfied so far.

  My current display drivers are the 7.14.10.1147 of the 945GM Express chipset Intel. The new drivers that have been added to the drivers on the Toshiba site list 17 and are the 7.14.10.1227. Unfortunately, they install! I get a message just after the initialization of configuration that these drivers are not the most appropriate for this laptop and it closed facility. When I try to update the Device Manager, it simply tells me that I already have the latest drivers for my machine.

  Please notify; p

  Hello

  Before you start installing the new driver remove the old. You can do this in the properties of the device in Device Manager.

  I did it with my Vista preinstalled Satellite A200 (also with the Intel graphics card).

• Can not start my Satellite Pro A10

  I have a Toshiba laptop Satellite Pro A10. When he tries to start windows, it comes up with the "We apologize for the inconvenience, but windows did not start successfully" etc. I tried all the options for example

  Start:
  Safe mode
  Safe mode with networking
  Safe mode with command prompt
  Last known good configuration
  etc.

  None of the options works. All I get is a flow of information about drivers and it then hangs. The last driver in the list is:

  multi (0) disk (0) partition (1) \WINDOWS\System32\Drive rs\Mup.sys

  I can't clear the checkpoint.

  Unfortunately, I can't find the disc that came with the laptop, so I'm well and truly stuck.

  Any suggestions?

  See you soon

  HI Leon,

  It is quite normal that there is a list of drivers displayed when you try to boot into 'safe' mode However, if initialization fails, obviously there is a problem with your operating system and your only options are to try to fix the problem by using the recovery console (you will need to boot from a CD of original Microsoft installation), or you can restore the original Toshiba CD recovery full operating system.
  A third possibility would be to start with a utility such as Norton Ghost or Acronis image backup/restore and restore a backup previously taken by an external device.

  The simplest option is to restore from a backup that is already taken, but if you don't then you would be better restore from the recovery CD Toshiba you can get at any Toshiba authorized Service partner.

  Kind regards

• Can not get my Satellite Pro L10

  I have a satellite pro l10, I tried to put my recovery disk in and she said keeping key c down when I start my computer but it does, nt work, how do I get this drive to work does anyone have an idea, s Please

  Hi James,

  Press and hold the 'C' key is a specific shortcut of Toshiba to allow the laptop to boot directly from the CD. However, you can also select the CD-ROM as boot device in the BIOS, just press the F12 key when you see the Toshiba start screen for power over the process and you will be presented with a menu of the device selection. Tab just down to the CD-ROM and press to enter. The laptop computer should now boot from the CD.

  Kind regards

• Pourrait PARALLEL port added to the Satellite Pro M40?

  Dear toshiba
  I have sattelie Pro M40 with room for a parallel port, the port can be added

  Kind regards

  Hello

  As Kevin says you can t add a parallel port, but you can use another device like PCMCIA card with parallel port.
  Check this box:

  http://www.IECI.com.au/products/Product_Page2.asp?product_id=113

  Good bye

• Wireless card is not on the Satellite C650-15U

  Hello
  I have a Toshiba Satellite C650-15U, this morning I tried to connect to the Net via wifi, but I saw that there is no connection. In Control Panel, there is no WiFi card, it seems to me that I have no card wireless at all!

  When I tried to reinstall the driver, the message: «card wirless not...» "is displayed. the only way to connect to the net is the cable.

  Can someone help me please.

  Can you enter check and if Device Manager card WLAN is in the list?
  Control Panel > system > Device Manager

  It should be listed under network adapters.
  Maybe some unknown device appears in Device Manager?
  Which driver you tried to install?

• What HARD drive can I install the Satellite Pro 2100?

  I installed a second hand Toshiba 40 GB HDD in my Pro 2100, but he fails to recognize in the BIOS. Any ideas?

  Yes, I have an idea ;)
  Have you checked if the HARD disk is not corrupted?
  I think it's a first step to find out what's wrong.

  If you are sure that the drive is 100% damage not so in my opinion him BIOS is unable to manage the size of the HARD drive. It s just too big size.
  The BIOS supports multiple disk sizes but if HARD drive it too big the BIOS may not be able to recognize the HARD drive.

• Why can not start the first Pro CC?

  He never moves past the loading screen and just crashes.

  It is performed without fault in the past, just that night, be difficult.

  I tried to restart creative cloud by connecting you to- and of course the PC. I also tried running it in compatibility mode.

  About AIDS.

  I run a big ASUS laptop, Windows 7, 16 GB of ram, Intel I7, SSD Drice, Geforce 630 m.

  I hope it's just a matter of an update?

  I have the CS6 family and installed the CS6 CC version. Would that be a problem?

  Thanks a bunch!

  Honey,

  Jesper Quistgaard

  Denmark

  http://compfreakstars.blogspot.com/2011/11/0xc0000005-error-every-day-many.html

• I can't uninstall the first pro.

  I can not uninstall the first pro VIA the cloud, either manually... and the program does not work

  Best way to uninstall an application CC use CC Cleaner App from Adobe tool...

  https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  Neil