With Officejet 951 HP cartridges ink tank

Similar Questions

• Compatibility problem with OfficeJet H470 and cartridge HP 138 (C9369HE)

  Just bought a new photo of HP C9369HE-cartridge for my printer H470b and have an incompatibility problem. The cartridge does not fit into the socket of the cartridge, because the edge of plastic on top of the cartridge.

  Have you checked the cartridge on SureSupply model - it is in the list of compatible cartridges.

  No original HP black cartridge? or there are different modifications of the HP OfficeJet H470b printer?

  Just having realized my error... I try to put the photo cartridge in the Tricolor cartridge slot, but it must be inserted into the slot of the BLACK cartridge.

• HP Officejet Pro 8500 has... Think new HP ink tank is empty.

  Printer stopped working and asked a new magenta ink tank.  I put a new reservoir of HP, but it keeps asking for a new.  I'm sure that wasn't too empty...  Please advise...

  Hi, James.

  What version of Windows are you using?

  Make sure that the cartridges are installed correctly

  Start > type services.msc

  Scroll down to print spooler

  Click with the right button on spooler and select stop

  Wait for Windows to stop the print spooler

  Close this window

  Control Panel > printers folder

  Right-click on the printer icon

  Select open

  If there are documents to print, waiting

  Click file > cancel all Documents

  File/close panel

  Unplug the printer from the computer

  Unplug the printer from wall outlet

  Wait 5 minutes

  Printer of the plug in the wall socket

  Plug printer into computer

  Go back and start the print spooler as shown above

  Try printing again

• OfficeJet Pro 8600 +. Error "there is a problem with the printer or the ink system... »

  OfficeJet Pro 8600 +.  Once we replaced the ink cartridges, our printer gives an error "there is a problem with the printer or the ink system.  Turn the printer off, then on.  If the problem persists, contact HP.  We've gone through the start/stop several times.  We also pulled back and ink cartridges in, in addition to taking the print head at.  I ran a diagnostic test download and it comes back with "unknown error (06).  Help, please!

  Thanks for your reply.  We exchanged all Costco ink cartridges and the printer seems to work very well at this point.  Yes, we did all of the print head and cartridge cleanings.  Nothing seemed to help.

• IIC system with non-move ink tank

  Is there a HP printer which is the printhead on the printer, the ink tanks are separate and do not move. The tanks are connected to the print head hoses. During printing, only the printhead, not tanks?

  I've seen printers HP with IIC that the ink tanks, well separated, do sit on the printhead and move with it.

  Hi thanhhuy456,

  The new models have transistioned to the use of other mechanisms of printing.  If the first printing mechanism, you may be able to find one of the older printers who have what you want, listed below.  To learn more about the products HP, click here.

  1. HP Officejet 8500 series
  2. HP Officejet 8500 series

  I hope this helps!

• Canon S820Printer my printer was working fine with Windows 7 Home Edition, then it stopped, magenta and yellow print. Ink tanks are full.

  My printer was working fine with Windows 7 Home Edition, then it stopped, magenta and yellow print.  Ink tanks are full.  What bad past and how to fix it?

  If you are sure that the ink cartridges are full, then try to re-seats and cleaning the heads - http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=8783

  - http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=8844
  If all goes well.

• OfficeJet Pro 8500 can operate with only the black cartridge?

  I have never use my color printer and do not want to buy color cartridges. Can I program the 8500 to print with just the black cartridge. If so, how? Currently, the printer does not work if all the cartridges are not loaded and with ink. Please notify.

  Hello

  Please try: put a piece of tape on the oblong hole in the ink cartridge of, it will continue to print black only. And once again, it is only a few pages.

  Kind regards.

• "I have a hp officejet 6500 e709 - black ink does not print." I have replaced the ink cartridge...

  "I have a HP Officejet 6500 E709 - black ink does not print." I have replaced the ink cartridge... clean the print heads and contacts... and nothing seems to work. All other colours print fine. HELP ME PLEASE.

  Before you buy a new set of PHA, you could try following the instructions on this post for a more aggressive cleaning Interior http://h30434.www3.hp.com/t5/Other-Printing-Questions/Photosmart-Premium-c309a-Black-prints-out-green-on-photo-paper/m-p/449245/highlight/true#M28673

  Try this first and post back to tell how you got.

• Why my printer HP Officejet 6600 uses color ink even if I'm not printing in color?

  I've had this printer about a year now. I replaced the full range of ink at least 3 times now, working on 4. I don't post much at all. A couple of leaves a day or two. I always thought she was using color ink very quickly so I thought I'd put it to the test. I changed the default settings in black ink only. I have replaced all the ink cartiridges, color and black. I decided this time I would not print anything in color just to see what happened. Well, the same thing is happening as if I were with color ink. The color ink is empty much faster than black ink. This seems weird to me. Now, we are at the point where it will not be printed unless I have replace the magentia. It seems unfair that they do not mention this clearly when you buy the item. Something like "Oh, by the way, we are not making enough money doing business as it should, then we will make replace you your ink supply, even if it is really not necessary and must take over." I paid for a new printer already with ink costs. Is there a way around this problem or am I stuck with it. Thank you.

  When you set the printer to print grayscale has also selected "black ink"? only

  HP and other printer manufacturers have technology another printer for different needs.

  • Some have integrated into the ink cartridges print heads.  These printers can print generally with one or more of the colors completely empty, or even with color or black cartridges (but not both) removed. The Deskjet 6980 series is an example.
  • Other printers have separate replaceable printheads and inks.  An example would be the printer Officejet 8600.  In these printers print head can be replaced if they are damaged by running the printhead with colors off.  Some of these printers allow printing with a color, the other will not.  If the printer is run without ink in one or several colours, the printer may be damaged, but the user may be able to recover without having to send to the printer for the service.
  • Other printers have permanent print heads.  To run only those without little ink in all colours would risk causing damage to the printhead due to clogs, air ingested in the grilled printheadvor printhead resistances of shooting. The Photosmart 6600 series is an example of this type of printer. For printers with fixed print heads that could require the service to get the printer to print properly again when the ink is finally replaced.

  The document described here how the ink is used.  The document is written for inkjet printers HP the same principles apply to printers inkjet from other manufacturers.

• Full ink tank cleaning

  My Photosmart C410a printer a lot of ink tanks that are used to catch ink when the cartridges are cleaned or the preinter passes through a print prep cycle.  I need help on how to access these tanks to clean them.  These tanks are located under the printhead in the corner before right to the printer.

  Well, if it is no longer under warranty, you can try to sop some of the ink. With the printer, open the access door as you would to change an ink cartridge. Once the carriage stops in the Middle, unplug the power cord at the back. This way the transport will remain in the Middle, and you will not work inside a live-powered device.

  You can sop part of ink with q-tips or something similar. But, be patient and slow, this can be very messy. Don't let the ink on things that it is very very difficult to get out. Once you get it sopped up to your satisfaction, close the door. Connect the power cord to the back of the printer and run it.

  Don't forget to not pick it up in the printer with the fixed supply cord, on the one hand, there is a time limit on transport sitting in the middle on some models, and if it is powered, it can itself reinstall to the right without prior notice. You don't want anything in fashion, like a finger, as appropriate. Leave the power cord only while you are there is the safest way.

• the ink tank cleaning

  I pressed by accident in the menu of my printer "ink tanks cleaning. I don't know what that means exactly. I tried to stop the process, but it did not work because my printer had already taken control of my computer. My printer model iseskjet J110a series. Please tell me what to do. Is this something wrong?

  Hi christaras,.

  Welcome to the HP Forums!

  I see the ink tank cleaning that happens with your HP Deskjet J110a, and I'm happy to help you with this problem of ink!

  This process is not bad, it's just picking the best quality print cartridges. All you have to do is wait until it finishes.

  Hope this helps you and have a great day!

• Will not print black after replacing the black ink tank

  After replacing the black ink tank, the printer does not print black data (text or graphic).  I ran printing HP and scan doctor utility and printed assessment page.  The text is printed in a pale blue color. Gray scale apperas block (far right) to have no black content and has a hint of cyan.

  Printer:

  HP Officejet 6000 E609n

  Thanks in advance for any help

  OK because that is a thing of warranty which may be worth dip the printhead as described below...

  (1) get a pan and put 1/2 "of very hot (not boiling) water in the bottom.
  (2) remove all ink cartridges, then remove the print head Assembly.
  (3) gently put the printhead nozzles down in water and soak for 5 minutes.
  (4) remove the print head and gently dry the electrical contacts.
  (5) replace the print head in the printer and then reinstall the ink cartridges.

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/HP-6500-Office-Jet-E709a-black-printer-cartridge-HP-920-not/m-p/447545#M36315

• DeskJet 3520: new splash black ink cartridge ink

  I just replaced my 564 to 564XL black ink cartridge. I received a message that the cartridge has been installed correctly. but when I tried to print I got a blank page. When I looked inside the printer, I saw that inner right before the printer is filled with fresh touches of black ink.

  I went on troubleshooting hp including cleaning printer head site and it did not help.

  Hey @idogold,

  Welcome to the Forums of HP Support!
  
  I understand that since the installation of a new black cartridge for your HP Deskjet 3520 e-all-in-one printer prints blank pages and you may have noticed some residue ink inside your machine. I would like to help you today to this question.

  Now, residue of ink inside right of your machine is completely normal behavior. For more information on why this product please click here.

  However, I'm concerned by the printing of blank pages. To begin troubleshooting can I please have you click here. When the support document opens can I please have cross you Solution three and four. This includes all sub-steps under two listed Solutions.

  Please reply to this message with the result of your troubleshooting. Good luck!

• In our officejet 7000 E809 black ink is not printing. We are not alone.

  In our officejet 7000 E809 black ink is not printing. You are looking for here we are not alone: http://h30434.www3.hp.com/t5/Ink-Toner-Cartridge-Printhead/Black-Won-t-Print-HP-OfficeJet-7000-E809a... We have replaced the cartridge. How can this be repaired?

  In fact, don't you worry. I figured out how to clean the print head. And fixed it. Thank you.

• How can I print with black and white cartridge only?

  
  

  Hello

  Unfortunately, it is not possible to print using the black and white, while one of the ink cartridges are empty.

  Using black ink only possible while there's ink color as well.

  While the color ink is not required for the purposes of printing, there are required for, maintnance operations of the device.

  As the appliance contains an internal printhead (IIC() system, lack of color ink can damage the system shortly. This is why the device is not functional when there is no ink in order to prevent damage to the system.

  For users who wish to print using just black ink (despite the reduced print quality), many HP printers offer options. For example, a driver colour setting (by selecting "print in greyscale with the black cartridge only" in printing preferences) specifies printing using only black ink. In addition, many IPH printers can operate in "reserve mode", which allows the user to continue to print with just the black cartridge when the colour cartridge is removed or not installed.In HP IIC systems, all supplies are required to be installed in the printer for the printer to function
  
  (Source: http://h10060.www1.hp.com/pageyield/en-150/articles/howInkIsUsed.html?cCode=il)
  

  Kind regards

  Shlomi