With regard to the process of the writer

Hi all

We want to set up the process of the writer to write the results to the database.

So that we can use these data in the ETL process.

Thanks for your help.

Kind regards

Sandeep

Hi all

I found the solution for this.

Export can help for this funcaionalty.

Thanks for your help.

Kind regards

Sandeep

Tags: Fusion Middleware

Similar Questions

With regard to the update of the locations of cards-oracle

HII everyone,
In my application, we using mapviewer, which was installed locally on our server, for map rendering and showing the locations of a client like pinball machines.
Suppose that some places (address, City) is updated map... How mapviewer (which has been installed on our server locally) will update this site all in rendering...
Thank you
learner

It depends on how you got the map features. Mapfeatures are usually stored in the cache. If a change in database may not appear in the card immediately. If, however, given the characteristics of the map as a vectorlayer, then simple vector update updates map. You should consider two options with regard to the update database process. You can store the geometry as a function that is updated on the fly as change attributes of database, or you may use a database trigger to update the geometry when the attributes change. Thus, using a combination of correct space architecture and mapviewer correct functions.

With regard to the application of Nook on the Surface RT. Is there a way to change the way that newspapers appear?

With regard to the application of Nook on the Surface RT. Is there a way to change the way that newspapers appear? Like corners, they give a better way to navigate and get the overview for the different sections.

Probably not "such what." Next time you launch the application, make sure that the menu bar to it and see if there is a feedback icon. You may be able to comment on what features you want and they can do just that.

I had Photoshop CS for a while. I use it for one purpose, which is to standardize my bronze products photos, all photos are identical with regard to the composition, lighting, backgrownd, actually, I always place the same scale of assessment pr

I had Photoshop CS for a while. I use it for one purpose, which is to standardize my bronze products photos, all photos are identical with regard to the composition, lighting, backgrownd, actually, I always place the pillar of satisfaction even scale and then only switch products bronze... a simple task of worm. For this reason I have is no need to upgrade my old version of Photoshop. My problem is that it doesn't work anymore since Windows 10 recently installed in my PC. IO have tried to install it several times but can't. Is anyone out there help me please!

Activation for CS is closed. Adobe provides you with a free replacement of CS2.

Uninstall CS

Go here: Download Adobe Acrobat 7 and Adobe Creative Suite 2 products

Click English, download Photoshop CS2 and also copy the serial number that comes with it.

Install CS2 and use this serial number CS2. There no need activation.

Take your copy of the CS, it is no longer usable.

With regard to the previous discussion on the recent settings of the workspace page

With regard to the post Re: recent files page , when I went back to answer, there is no way to reply to the post. After trying the settings using the provided screenshots, page of recent files always came every time. So the answers you have provided are not correct for my particular case. Finally, I tried without any control in the preferences and that my custom workspace save as I wanted. Here is how I had to define it.
Thank you.

It is doubly strange. I just check and that the other thread is not locked and can be answered. Someone else has a problem, you reply to this thread.

Secondly, I turn off the settings described works for me and Photoshop opens without MRU and start work space.

You did _uncheck_ these settings? I like the new workspaces, so mine are checked, but it clearly says _Show_ at the beginning of each line.

With regard to the management of exceptions in coherence
Hello
I use c ++ connection of consistency

try {}
String::handle gridHandleCache = GridCacheName;

if(hCommCache == null) {}
hCommCache = CacheFactory::getCache (gridHandleCache);
}
else {}

"cost < <" Info: "< < GridCacheName < <" Cache already in a State of assets "< < endl;"
}
}
{catch (exception::handle Vex)}

"' cost < < ' consistency exe;
}
{} catch (std::exception (e)
cost < < e.what ();
}
catch (...) {
cost < < 'unknown exception ';
}

When the error occurred (duration or other errors), I still get an exception unname. It will never enter the Exception::Handle part of vex.

When he calls on Wrestling (Exception::Handle vex) {.} I want to separate the duration and connection error ecpetion sepeartyely.

Can I know what would cause / or how to handle it separately.

What are the mistakes is possible to connect / put/get/invoke (touchprocessor). serializable cast?

-Thank you

Edited by: 882600 August 31, 2011 05:51
There are several ways to achieve this. Perhaps the simplest is to simply catch Exception as std::exception const &, or one of its derivatives, then call what(). However, if you want to use the specific exception hierarchy richer consistency, you can get the equivalent of the what() result by calling getDescription()-> getCString(). With regard to the rankings largely what types of exceptions are "fatal", which would be RuntimeException and its derivatives, but the scope which it was caught in general is going to be more telling.

Mark
The Oracle coherence

With regard to the decode function
Hi all

I want to know abt decode function in sql-oracle
I... e passing parameters to decode using decode using the ': ' bind the parameter

Select the WORK, decode(:j,'CLERK','MANAGER','ANALYST','EXEC',JOB) of EMP;
I declared the variable j in sql environment
VARCHAR2 (20) OF THE VARIABLE J;
I have the query exec
and had the clerk as an input parameter
but the o/p as iam
JOB DECODE(:J)
--------- ---------
MANAGER
MANAGER
MANAGER
SELLER SELLER
SELLER SELLER
SELLER SELLER
CLERK CLERK
SELLER SELLER
THE ANALYST ANALYST
CLERK CLERK
THE ANALYST ANALYST

JOB DECODE(:J)
--------- ---------
CLERK CLERK

12 selected lines.

SQL > PRINT J;

J
--------------------------------------------------------------------------------

im not getting o/p
so please hlelp me only: should be used not &
This is my first thread.
execuse me if no errors

tons of thanks in advance to all
Hello

We can try like this...

Begin
: j: = 'CLERK ';
end;
/

then, we execute your SQL query as below...

Select the WORK, decode(:j,'CLERK','MANAGER','ANALYST','EXEC',JOB) OF the EMP
where JOB =: j;

I think that this will solve your problem

Kind regards
Soak the Sevin rana

with regard to the 39 problem

I need more instructions, I know not how, to one where I copy and paste these instructions too? where's the phone? I know I look stupid, but I can understand it once I have more help and what is a problem of 39 or error code 39 can you help me more? I would really appreciate it.

Hello

Code 39 means that the driver is corrupted or missing. Guess it's a CD/DVD.

Please make all underneath the same if you've done it before as it's often the total of the process which
solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a loose cable
or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

--------------------------------------------------------------

Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if
There are 'old', you can reinstall. Many use Windows default drivers, but a few will be
have more special. Also check the website of the manufacturer of the car.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

Hope these helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

With regard to the mode of transport SYNC
Version: 11.2.0.3
Operating system: Unix/Linux platforms

I'm new to Data guard

It's that I understood on the SYNC mode after googling and read 11.2 doc. correct me if I'm wrong.

SYNCHRONIZATION (synchronous Transport Mode)
======================

With the transmission SYNCHRO mode, LGWR is not allowed to recognize that a commit succeeded until the LNS confirms that it again to retrieve the transaction was written to the Redo logs waiting in the standby.
Until LGWR extracted this confirmation of LNS, the database is suspended and the validation operation is supported. That is to say. In the event of failure of a network between the (primary) production database and the standby database which prevents the
again to be written in the newspapers waiting to roll forward, then the primary database will block.

SYNCHRONIZATION method is also referred to as method "Zero data loss.

But there is an attribute called NET_TIMEOUT for LOG_ARCHIVE_DEST_n parameter; Assigned (in seconds) decides how long LGWR should wait to hear from LNS on scripture to redo in Standby Redo Logs.

The default value at 11.2 is 30 seconds. After 30 seconds, if LGWR cannot hear the LNS on a succesfull write to redo in Standby Redo Logs, process LGWR disconnects from the LNS and acknowledges the primary VERIFICATION and allow
DB primary to continue treatment even if he can no longer communicate with the day before.

This isn't strictly "zero data loss" as a VALIDATION has been recognized in the primary despite the entrance of again as a result of this change is not written for the eve SRL. Right?

Question2.

In all our Prod DBs, LOG_ARCHIVE_DEST_2 is set to the value below. No idea what type of protection is this DB in?
```
    MAXIMUM PROTECTION
    or
    MAXIMUM AVAILABILITY
    or
    MAXIMUM PERFORMANCE ?
```
```
service="HEWRMS_DG", LGWR SYNC AFFIRM delay=0 optional compression=disable max_failure=0 max_connections=1 reopen=300 db_unique_name="HEWRMS_DG" net_timeout=30, valid_for=(all_logfiles,primary_role)
```
This isn't strictly "zero data loss" as a VALIDATION has been recognized in the primary despite the entrance of again as a result of this change is not written for the eve SRL. Right?

You'll only no loss of data if you have maximum protection. If the primary is unable to reach the day before, it stops after a fixed delay. Oracle recommend two standby mode if you want maximum protection.

In available maximum primary will try to reach the previous day in the net_timeout value and whether it will commit the transaction and move. It will essentially drop down for maximum performance until it can connect to the waiting again.

Check the mode of protection of data.
```
select protection_mode from v$database;
```
Should read: you only have the guarantee of no data loss with maximum protection. You have no data loss with maximum availability until your watch and network are correct.

Published by: Freddie Essex on 5 June 2013 11:18

Strange behaviour of my 45.5.1. with regard to the address book

This happened today, out of nowhere I started to email. I clicked on WRITE as usual, then: and now where I typed the first letter of the address of the recipient, which was 'c', I got a drop-down list of my address book complete, arranged with addresses beginning with c first email, then all the rest who have 'c' somewhere in the address, then the rest. It happens to any letter I start with. What on earth I did (so I wouldn't do it again) and how can I disable it? PS: The new destination address is not in my address book, there is no shortcut, some inconvenience. When I managed to tap on the address book entry, the new address appeared in bright red. The only frame of reference I have for it is Christ's words in an old copy of the New Testament, I had. Is that where I should make my appeal? But seriously, I find a link that might have instructions but no luck, so any help will be much appreciated.

Seizure semi-automatic is not new but I just thought that you have ever used it and in the update process, it has become allowed. (I agree that Thunderbird will change frequently or that he loses all settings during upgrades. We have users who lose toolbars, or their connection fails, because a checkbox somewhere has changed its State during an upgrade).

http://SmallBusiness.Chron.com/remove-email-auto-fill-Thunderbird-63867.html

It had not occurred to me that he could be disabled, or someone would.

With regard to the NNTP protocol

Hi guys, I'm new on the development of network and the blackberry platform. I am developing a NNTP Reader on my blackberry by Socket connection.

Here are some of my code

final class _mainScreen extends MainScreen {
    private static String URL = "socket://news.microsoft.com:119;deviceside=false";

    public _mainScreen(){
        super();
        LabelField title = new LabelField("Welcome to myNewsgroup", LabelField.ELLIPSIS | LabelField.USE_ALL_WIDTH);
        setTitle(title);
        try {
        StreamConnection conn = null;
        conn = (StreamConnection)Connector.open(URL);

        OutputStreamWriter _out = new OutputStreamWriter(conn.openOutputStream());
        String data = "LIST\r\n";
        int length = data.length();
        _out.write(data, 0, length);

        InputStreamReader _in = new InputStreamReader(conn.openInputStream());
        char[] input = new char[length];
        for ( int i = 0; i < length; ++i ) {
            input[i] = (char)_in.read();
        };
        _in.close();
        _out.close();
        conn.close();
        } catch (IOException e) {
            // TODO Auto-generated catch block
            //Dialog.alert("Error!");
            e.printStackTrace();
        }
    }

But the code does not work, it will freeze in the similator. Any ideas? Thank you!

In fact, I wonder what kind of network connection should I use?

Steve

Your Simulator is the gel because you call a blocking method of e/s on the UI thread. To avoid this deadlock, you must perform the operation of network on a different thread.

Regarding the connection, try using the interface SocketConnection. I've never needed to use one before, but here's a rough example of how I would do it:

package nntp;

class NNTPConnection extends Thread{    public void main(String[] args)    {        NTTPConnection query = new NTTPConnection("news.microsoft.com", "List\r\n");

        // Start the query thread.        query.start();    }

    NNTPConnection(String host, String command)    {        this.m_host = host;        this.m_command = command;    }

    private final String m_command;    private final String m_host;

    public void run()    {        this.getResponse("socket://" + this.m_host + ":119", this.m_command);    }

    private char[] getResponse(String address, String command)    {        SocketConnection conn = null;        OutputStreamWriter writer = null;        InputStreamReader reader = null;        char[] response;

        try        {            conn = (StreamConnection) Connector.open(address);            conn.setSocketOption(SocketConnection.LINGER, 10);

            writer = new OutputStreamWriter(conn.openOutputStream(), "UTF8");            writer.write(command);            writer.write();

            reader = new InputStreamReader(conn.openInputStream(), "UTF8");

            // Create a buffer to store the data in.            DataBuffer buffer = new DataBuffer();            int length = 0;            int ch = 0;            while (ch != 1)            {                // get the next char from teh stream.                 ch = reader.read();

                // Add the character to the buffer.                buffer.writeChar(ch);

                // Keep a count of how many chars we're writing to the buffer                length++;            }

            // intialize the array we're returning to the number of chars we put in our buffer.            response = new char[length];

            // Start at the very beginning  I hear it's a very good place to start.            buffer.rewind();

            for (int i = 0; i <= length; i++)            {                response[i] = buffer.readChar();            }        }        catch (IOException ex)        {            // Whoops.        }        finally        {            try            {                if (writer != null)                    writer.close();                if (reader != null)                    reader.close();                if (conn != null)                    conn.close();            }            catch (IOException e)            {                // Couldn't cloase a stream. That can't be good.            }        }

        return response;    }}

After you set this class whenever you want to submit a NNTP request you would simply initialize an instance of this class and run the legacy of java.lang.Thread method of 'start' to run your query without freezing your program.

Edit: Fixed a misspelling in my code.

With regard to the ADF Restful Services in 12.2.1

I went through restful ADF services article in the guide of the developer and some examples, but its only contours:
(1) how to expose methods standard and custom Vo as a restful service. There is no mention of how to expose the custom method AM restful service, is it possible from now with automated wizard provided by ADF 12.2.1 for restful service?
(2) a typical use case is to write a function which is given to couple view of your and do some massaging until it can be written in a custom am method all your available, but how expose it as a restful service, the only option I see to this effect in 12.2.1 is to use SOAP service if I use automated restful services Wizard and do not write service JAX - RS scratch code creating an instance module root of service application, but our architecture warrants to use rest AND JASON architecture style.
If anyone has idea about this or has any comments/blogs about it in 12.2.1, please let us know!
Concerning
Mukul

In the 12.2.1 version we still have no support for the exhibition AM level method REMAINS the use of assistants to REST.

(You could build a Java class that access the AM and then expose this class REMAINS).

If it is the important scenarios for you please contact the Oracle Support and add your request to the emergency that follows this feature - 16851420.

In RoboHelp 2015, are there changes with regard to the CHM files?

I would like to know if there is a significant change for CHM files.
The only option that I use for output is Microsoft HTML Help to generate CHM files. I can't use other (WebHelp and etc.).
Well, I use the demo version of HR 2015 but I did not notice a significant change regarding the CHM files.
The dynamic filter is not applied to it. I am currently using RoboHelp 9, so I ask you to these changes because I'm thinking that if it's worth changing HR 2015, because I use the output HTML, I only generate CHM files.
I am trying to compare the two versions and I try to note their differences, but if you know some that it would be useful for me.
Sorry if I make mistakes, because English is not my mother tongue. Thanks in advance!

Hello, Camila

Your English is very good! Yes, dynamic content filtering is only available with the latest reactive HTML5. Available for CHM output functions are mainly dictated by Microsoft because the format of HTML (.chm) help is their owner specification.

RoboHelp has added a few things on top of the base CHM (skins for CHMS, glossary and browse sequences, etc.), but you won't find many features more modern in CHMS because Microsoft has continued to develop a long time ago.

That said, while the CHM format may not have a lot of bells and whistles that you hope to, the new 2015 RoboHelp has many other advantages that make it easier create and justify an upgrade.

Thank you

John Daigle

Adobe Certified RoboHelp and Captivate instructor

Evergreen, Colorado

www.showmethedemo.com

With regard to the update system - restriction of access to records admin app

Regarding the system update in this thread to update system - restricting access to folders app admin , I can not answer in this thread because I'm not a mod and there is no reply button.
My question concerns the public record, what we do with it?
S ' there is a placed file in it can it use liquid?
- I assumed that the front-end server can access this directory, but (from the front end) we won't be able to use the new API v3?
- Other applications access to the updated files? That is to say. He says in public, it is that? It is not safe at all in other words?
-Is the case more as a temporary workspace or the (public) long-term storage? Can other apps delete files there? That is to say. I might need to make sure that a file exists before you assume it's there.

Hello
1. The files in the folder admin app can run modules and liquid (if you do not use another library of client-side library which is in conflict with the liquid syntax)
2. Yes, front-end can access files on this folder (you cannot list the contents of the folder of front end) and you can access the REST API using module_data; direct access to the API is not possible, because you will need to be authenticated
3. Yes, other applications can access the files put there, same as possible that nobody knows the URL of the page
4. It is a public storage for long-term applications. Apps cannot delete files in other folders for apps, but they can read;
Cristinel

with regard to the contact form

How can I change the "from email" on a widget contact Muse - the isn´t page has launched the catalyst company but on my own server customer?

Hello

At this point, we cannot change the email address 'from' Muse. The email address 'from' will be the one with which you are connected to Muse.

You can go ahead and add this as an idea here - ideas for features in Adobe Muse

Kind regards

Aish

With regard to the process of the writer

Similar Questions

Maybe you are looking for