With the help of a .dll with a CVS 1458RT file

Similar Questions

• NOR - RT.ini in the cvs-1458RT file

  Hello

  CRIO systems, there is a file named NOR - RT.ini, which can be used to settle the claim of commissioning, set the time zone, etc. It is normally located in the root. Is there a similar file for CVS-1458RT, and if so, where can I find it?

  Thank you

  Soheyl

  Hello

  If you go to/etc/natinst/share you will find no - rt.ini and lvrt.conf. Time zone is located in the [LVRT] section of ni - rt.ini (RTTarget.TimeZone = "Etc/GMT + 6" for example "), and the startup application are defined in lvrt.conf.

  I hope this helps!

  Katie

• With the help of a ClassLoader to load several SWF files?

  Hello community,
  
  Pulling my hair out on this one. I want to use a single charger (from the class Loader) to, in order, load a SWF to a single movieclip on the stage. I have a charger that I want to load external files: 'peel0.swf', 'peel1.swf',..., 'peel9.swf' in 10 corresponding clips (that already exist on my scene): 'peel0_mc', 'peel1_mc',..., 'peel9_mc '.
  
  The problem with my code is that it does not load, but the last peel. Everything seems to be cranking away as you like, until I have look at the contents of my peeling - only the 'peel9_mc' Gets the external file "peel9.swf" in charge. When I slow down things with 'Simulate download' I see the 0-8 "peelX_mc" loaded with the correct SWF but when the 'loop' moves to the next line, it disappears from the mc. It's as if the *.addChild method does not stick.
  
  Any input would be greatly appreciated,
  
  -john
  
  

  VarioPegged!

  Yes! It worked like a charm. I do * love * this community.

  I sincerely appreciate your time and efforts to help me.

  Kind regards

  -john

• Problem with the help of DLL functions

  Hello.

  I'm writing a DLL that calls the functions of a DLL camera and them ends and passes of LabView. I wrote some code of practice and the dll of passage of functions and events with Labview and LabWindows/CVI DLLs, so I like to think I have a reasonable understanding on what I'm trying to do. However I keep getting errors in calling the functions of DLL functions camera I want to use in my DLL.

  I have two functions in the camera DLL, XC_AddImageFilter, and XC_RemImageFilter, I would like to wrap and put at disposal in my DLL. When I compile I get the following errors:

  2 link project errors, Undefined symbol '_XC_AddImageFilter' referenced in "ImageFilter.c". Undefined symbol '_XC_RemImageFilter' referenced in "ImageFilter.c".

  I tried to tweak the prototypes in my header file and the change in functions but nothing I try seems to work. I connected the camera DLL in my project in a way that was previously successful with another practice DLLs and I browsed this forum for similar problems, but I can't seem to find a soloution.

  Thank you for taking the time to read this. I hope that you will be able to help me with my problem.

  PS I had problems to join my code so I put an extension .txt at the end and apparently has worked so please forgive the suspicious file extensions.

  Sorry!

  I do not understand the Labview.lib file which is why Labview functions weren't working! Duh!

  #begginer errors!

• With the help of SequenceFilePreStep StepName run or skip

  Looking for help with a modification to my test menu.

  I have a number of subsequences that will call the test specific files that:

  (Not SubSeqCall) Compare_Interface_Max.SEQ (where the StepName contains the name of the sequence file called)

  (Instruction step)   Rename the Test with the account of the error file (Call a DLL to rename the "Compare_Interface_Max.seq" file as: 0 - Compare_Interface_Max.seq I know how many errors are in the file.)

  This format is repeated for test sequences about 180.  Sometimes, there will be a timing problem and I need to run some tests.

  What I'm trying to do is to before running each test, use a DLL call to test a file name in the directory of reports such as "0 - Compare_Interface_Max.seq" and NOT to run the test, if it is already passed.

  Two problems:

  1. How can I get the StepName calling within the SequenceFilePreStep?

  I can't seem to find in the "Runstate.Caller" variables... ».  I need the name of the step that calls to test the name of the file.

  (I tried to adjust the Locals.sStepName to the current stepname inside the expression pre-echelons, but it does not yet exist, PreStep is not yet known when the SequenceFilePreStep is called.)

  2. once I have the name of the step (i.e.: contains ".seq") so I can do my call to the DLL to test to see if the file exists.

  If the file is already outdated OK, I want to SKIP the step of subsequence call and the next stage of education, and I do not know how to do it from inside the SequenceFilePreStep.

  Any suggestions?

  Mike

  RunState.Caller.Sequence.Main [runstate. Caller.RunState.NextStepIndex]. Condition = "False".

  RunState.Caller.Sequence.Main [runstate. Caller.RunState.NextStepIndex + 1]. Condition = "False".

• I need help with a problem of file softdub.dll any answers or how to replace it?

  I need help with a problem of file softdub.dll all the answers, or how to replace it?  Yes, it's a problem of Vista vs itunes and apparently I lost? This file somehow.  I have no idea how blessed remedy.  I tried all the normal fixes / easy I know, but I am a novice at best.  so please, be gentle and try to guide me through a response.  Please, I beg you!

  Hello

  Did you download and save iTunes on the desktop > then right-click > select run as administrator to install?

  If you don't have anything done, see if this information helps you.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  If the advice already given does not, please contact Apple for assistance.

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• My AirPort Extreme end not implemented with the help of AirPort Utility

  Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.

  When I try to set up as a Wireless extender...

  Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?

  .. .it will not accomplish the synchronization upward with AirPort Utility.

  Which version of AirPort Utility?  If it's on your Mac... and you don't know what version you have...

  Open AirPort Utility

  Click the AirPort Utility menu in the upper left corner of the screen

  Click on about AirPort Utility

  Report on the version number you see here

  You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?

• With the help of iPhone 6 s. try to copy the text message with a tap double and get a bubble with icons. How can I copy the message to paste in another?

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  maryml wrote:

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  Press and hold on the text and wait for the copy/more pop up.

• With the help of Club running on the Nike watch +.

  Hello

  This is something I have tried to work for a while and have not yet been able to find an answer. At the moment I use Nike + management club on my iPhone to follow the tracks that I find that gps is better than just using the application of the workout on my watch. However, something that really bothers me is that I start the race on my phone, but I can't then view my stats while running without having to press on and tap the watch and wait for the application to load, very irritating to race. I want to be able to lift my wrist and live stats are there to watch me, not listening and not get my phone out of my pocket. Surely this is something that can make the original watch?

  As a separate issue with the new app, Nike +, it does not recognize the songs I downloaded on my phone of Apple music in my playlists, then I have to play the separatelay of music through the application of music as opposed to go with Nike +? The ides on how to fix or is this a known problem with the latest Nike + app?

  Hello

  You may find it useful to consult the support resources of Nike and/or contact Nike for assistance with the help of their application:

  • Contact Nike (support is available by phone and via social media):
    • https://support-en-us.nikeplus.com/app/contact/l/4/t/4462/
  • Nike + running Club to support:
    • http://nikeplus.com/support/

  More information:

  https://iTunes.Apple.com/us/app/Nike+-run-Club/id387771637?Mt=8

• With the help of old gear series noon on El Capitan

  I have a Vox Tonelab SE effects audio Board (around 2004), there the old serial midi on the back ports. I hung with the help of a USB MIDI interface cable. While the USB Midi interface to the show in Audio / Midi set upward and also in the profile system for USB port it does not detect the Vox Tonelab so no communication lunch.

  There is a POWERPC application called ToneLabSE SoundEditor which I downloaded and installed in the hope he would install a driver but I guess that this obviously doesn't work on INTEL in any case. Using Wine I can run the PC version, but still no communication via midi.

  Someone at - it ideas, would like to get this Panel communicating effects via MIDI.

  Thank you

  

  

  

  Solved! Using the WINE app I've run the version of the PC of ToneLab SE editor application. So pretty unintuitively by changing the serial midi to USB, SERIAL interface cables that went to the and out on the Tonelab SE. Now of the Se ToneLab editor I can write banks of programs to hardware Tonelab, but unable to empty the banks since the material Tonelab to software. My main desire was to use Expression pedals on the Tonelab as Midi Ableton controllers and some of the switches to the control of the Looper stomp. Now I can do it all. Hooray!

• With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

  With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

  Opening was a pro the Pro amateur-oriented or serious app, usually shooting Raw, probably on a digital SLR.

  If that's you then pictures will miss a lot for you.

  If this isn't the case, then opening was probably overkill for your needs.

  If you like the pictures then this is the way to go.

• Thunderbird will only connect if stop then reopened. (With the help of Mac 10.9.4)

  With the help of Mac 10.9.4
  If I open Thunderbird, I can connect to my e-mail address and download the messages. If I select "Get Mail" once again, Thunderbird crashes and fails to connect to my emails. If I then close Thunderbird and re-open it, I'm able to immediately connect to my mail.

  It seems to have sorted itself after a few days. (Fingers crossed). Until today it worked properly. Will keep an eye on things for the next week and the report does so again.

• Anyone having problems with messages of script with the new version of GMail and Yahoo Mail? All the others seem fine and no problems with other browsers. With the help of FF25

  Gmail and Yahoo mail are very slow to load. I get a message from the script almost whenever instruct me to continue or to stop the script. Everything I have shut down or restart the browser goes blank and hangs. So, I have to restart Firefox. I followed suggestions on the help pages for the slow e-mail accounts or issues. (cleared cache etc, reset etc.) nothing solves the problem. I only noticed the problem since the first update of FF25. Scripts to stop even on these pages is not acceptable, because you are directed to the pages who insist you must restart scripts. It's a nightmare! Gmail both Yahoomail are very slow to respond to clicks more.

  Your list of details of the system shows that you have a user.js file in the profile folder to initialize some preferences at each start of Firefox.

  The user.js file appears only if you or another software created, therefore, normally, he wouldn't be here.
  You can check its contents with a text editor if you do not create this file yourself.

  The user.js file is read whenever you launch Firefox and initializes the preferences to the value specified in this file, so set of preferences via user.js can be changed temporarily for the current session.

  • http://KB.mozillazine.org/Preferences_not_saved

  You can rename or delete the prefs.js file and numbered possible prefs-# .js and the file user.js to reset all default prefs.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

  Note that the folder "Application Data" in XP/Win2K and the "AppData" folder in Windows Vista and Windows 7 and later versions are hidden folders.

  • http://KB.mozillazine.org/Show_hidden_files_and_folders
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• ABP is blocking content from Ticketmaster, I tried to turn it off but it doesn't. I use Ticketmaster on my iPod, so I know that the problem is with the help of PBA.

  Tried different options of disabling with no joy. Don't know what else to do

  Try to start Firefox in safe mode. If there is no problem, then while
  a course in Firefox > Modules and delete the PBA. Then restart
  FF. If there is still a problem, Ad-Block can be reinstalled.

  ======================================
  

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• I get double Firefox screens declined downloads articles. With the help of FF19

  FF19 opens fine. However when I go to open an article reduces the brightness of the screen and when he returns to retouch the brightness, there are now two screens, one behind the other. When this happens, I am unable to do anyhting in FF and must end the process.

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.