Similar Questions

• How to create the ISO image of windows 8 with the help of boot, efi, sources, and support files

  Hello
  I followed folders in my USB key:

  Boot
  EFI
  Sources
  Support,

  and the following files:

  Setup
  Bootmgr.EFI
  Bootmgr

  How can I create an ISO image of windows 8 with the help of these files and folders. I even installed ADK, but I couldn't keep up with it.
  I would be very grateful if someone could help me out here.

  Secondly, I would also like to know how to create a system image of WINDOWS 8, where the hard drive breaks down.

  Concerning
  MAK

  If you have the upgrade key, go here

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  You can go for the use of win8 / win7 / vista to match highlights you want - and download the win8 installation and run the installation with your key to download you need to install windows from that.  Will allow you to have an iso bootable.

  Make a picture of the control panel system / Windows 7 file recovery / system Image.  I certainly wouldn't put it on dvd.  It will be too.   Find an old preference portable hard drive and buy a $ 20 usb box, get an external hard drive.

• With the help of Windows agent to send log files

  Hello

  I really need to understand the sending of log files by using the Windows agent.  I have seeen your doc about this and it is a bit easy.  Then the event_marker is complicated.  The example shows a bunch of control characters and braces.    I need to understand the parameters event_marker.  Which, in a text file suggests that there must be a event_marker?

  Thanks in advance,

  Michael

  Hey Michael - don't know how I missed this one! The event_marker is a regular expression that is known to match the beginning of a new log message. For example, say I have the following logs:

  2014-03-27 10:29:38, 534 [pool-35-thread-1] DEBUG opId = com.vmware.sps.qs.notify.VasaProviderInfoNotifier - survey for the VASA provider changes

  2014-03-27 10:29:38, 540 [pool-35-thread-1] DEBUG opId = com.vmware.vim.query.client.impl.QueryDispatcherImpl - send request:

  declare default element space namespace "urn: vasa;

  declare namespace qs = "urn: vmware:queryservice";

  declare namespace vim25 = "urn: vim25";

  declare namespace xlink = "http://www.w3.org/1999/xlink";

  declare namespace vasaData = "http://data.vasa.vim.vmware.com/xsd";

  declare namespace vasa = "http://com.vmware.vim.vasa/1.5/xsd";

  for $doc in //VendorProviderInfo

  return

  {data ($doc/vasa: back / vasaData:uid)})}

  2014-03-27 10:29:38, 543 [pool-35-thread-1] DEBUG opId = com.vmware.vim.query.client.impl.QueryDispatcherImpl - recorded flow (QueryResponseMonitor): 27227

  You can see how the second message is a multiline message. If you do not specify an event_marker then the multiline message will be divided into individual events. However, if you specify an event_marker with a regular expression that matches the start of an event, then it will not break the message upward. For the type of message above, I could use an event_marker like:

  {event_marker = ^ \d{4}-\d {2} - \d {2} \d{2}:\d{2}:\d{2},\d{3}

  Which matches: 2014-03-27 10:29:38, 534

  The event_marker can be as short or as long as you want, but you must ensure that the regular expression that you specify is guaranteed to match a new event. I hope this helps!

• With the help of Control Source of Robo - project record

  There are two writers working on an HTML project, both using Source control explore 3.8 with RoboHelp 6. I was the creator of the project and added to Source code control.
  
  When another writer click on the button "save all", it takes 20-30 minutes until registration ends (when the hourglass disappears), allowing him to work again in the project.
  
  I have no problem with the backup. The Source code control database is on a separate server from one of our machines.
  
  We are new to this workflow, so it could very well be something done out of ignorance, but mine works fine and I installed the software on the other machine and has helped put in place under Version control.
  
  In the Task Manager CPU usage is up with the RoboHTML process using about 95 percent. I don't see anything different in his installation/configuration that should cause this. All suggestions, ideas, would be most appreciated.

  A good starting point would be to have your colleague to rebuild his CPD record. (In this order: make a backup copy of the project, check all of the files, close the project, delete the PCD file, and then reopen the project.)

  RoboHelp will rebuild the cpd file when it opens the project. Depending on the size of the project, it can go fast (almost imperceptible) to VERY slow (hours). Spin for as long as it takes this time - the following instances of the opening of the project should be normal.

  HTH,
  G

• With the help of a button to open another file

  I created a file with a button above. Button action has been implemented to open a new pdf file. The problem is the opening of this new file is not open in a new window. I need to set it up so that the new file may be closed, but the original pdf is always available. How can I do this?

  If you use a link of type "Go to a page view" to open a different PDF file, you can change the link after you created and select "open in > new window:

  

  The trick is the edition after establishing the link.

• With the help of British Colombia as a project management system

  Hi guys,.

  I am new to BusinessCatalyst, I have subscribed to the online marketing package and created my first website. I am including several features on the site, including a private forum and several forms to submit the data. I would also like to have a private area to manage projects between the members of the site. This could have outages task, assigning tasks specific to different members and due dates % completed data, ideally, there should be a system of documents where the work can be saved and linked to the special page. I just need some advice on whether or not this is possible using catalyst for business or if I have to use external software.

  Kind regards

  Ransom of Mitchell

  Since BC cannot you access or code server-side run the database directly, I don't see how to do it at the end of BC. That said, you can watch the different project management solutions out there and maybe customize so that it matches the look and feel of your site of BC. I'm sure that redmine allows this. Check it out at http://www.redmine.org/. Depending on the level of customization you need you will need to learn some Ruby on Rails.

  See you soon,.

  -mario

• My AirPort Extreme end not implemented with the help of AirPort Utility

  Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.

  When I try to set up as a Wireless extender...

  Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?

  .. .it will not accomplish the synchronization upward with AirPort Utility.

  Which version of AirPort Utility?  If it's on your Mac... and you don't know what version you have...

  Open AirPort Utility

  Click the AirPort Utility menu in the upper left corner of the screen

  Click on about AirPort Utility

  Report on the version number you see here

  You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?

• With the help of iPhone 6 s. try to copy the text message with a tap double and get a bubble with icons. How can I copy the message to paste in another?

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  maryml wrote:

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  Press and hold on the text and wait for the copy/more pop up.

• With the help of Club running on the Nike watch +.

  Hello

  This is something I have tried to work for a while and have not yet been able to find an answer. At the moment I use Nike + management club on my iPhone to follow the tracks that I find that gps is better than just using the application of the workout on my watch. However, something that really bothers me is that I start the race on my phone, but I can't then view my stats while running without having to press on and tap the watch and wait for the application to load, very irritating to race. I want to be able to lift my wrist and live stats are there to watch me, not listening and not get my phone out of my pocket. Surely this is something that can make the original watch?

  As a separate issue with the new app, Nike +, it does not recognize the songs I downloaded on my phone of Apple music in my playlists, then I have to play the separatelay of music through the application of music as opposed to go with Nike +? The ides on how to fix or is this a known problem with the latest Nike + app?

  Hello

  You may find it useful to consult the support resources of Nike and/or contact Nike for assistance with the help of their application:

  • Contact Nike (support is available by phone and via social media):
    • https://support-en-us.nikeplus.com/app/contact/l/4/t/4462/
  • Nike + running Club to support:
    • http://nikeplus.com/support/

  More information:

  https://iTunes.Apple.com/us/app/Nike+-run-Club/id387771637?Mt=8

• With the help of old gear series noon on El Capitan

  I have a Vox Tonelab SE effects audio Board (around 2004), there the old serial midi on the back ports. I hung with the help of a USB MIDI interface cable. While the USB Midi interface to the show in Audio / Midi set upward and also in the profile system for USB port it does not detect the Vox Tonelab so no communication lunch.

  There is a POWERPC application called ToneLabSE SoundEditor which I downloaded and installed in the hope he would install a driver but I guess that this obviously doesn't work on INTEL in any case. Using Wine I can run the PC version, but still no communication via midi.

  Someone at - it ideas, would like to get this Panel communicating effects via MIDI.

  Thank you

  

  

  

  Solved! Using the WINE app I've run the version of the PC of ToneLab SE editor application. So pretty unintuitively by changing the serial midi to USB, SERIAL interface cables that went to the and out on the Tonelab SE. Now of the Se ToneLab editor I can write banks of programs to hardware Tonelab, but unable to empty the banks since the material Tonelab to software. My main desire was to use Expression pedals on the Tonelab as Midi Ableton controllers and some of the switches to the control of the Looper stomp. Now I can do it all. Hooray!

• With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

  With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

  Opening was a pro the Pro amateur-oriented or serious app, usually shooting Raw, probably on a digital SLR.

  If that's you then pictures will miss a lot for you.

  If this isn't the case, then opening was probably overkill for your needs.

  If you like the pictures then this is the way to go.

• Thunderbird will only connect if stop then reopened. (With the help of Mac 10.9.4)

  With the help of Mac 10.9.4
  If I open Thunderbird, I can connect to my e-mail address and download the messages. If I select "Get Mail" once again, Thunderbird crashes and fails to connect to my emails. If I then close Thunderbird and re-open it, I'm able to immediately connect to my mail.

  It seems to have sorted itself after a few days. (Fingers crossed). Until today it worked properly. Will keep an eye on things for the next week and the report does so again.

• Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Would you like to share why you must do a clean install?

  You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.

• ow change titles & dates of lots of pictures (like in iPhoto?) With the help of Mac 'Pages' on, 2008 aluminium MacBook running OSX El Capitan 10.11.4

  How to change titles & dates of lots of pictures (like in iPhoto?) With the help of Mac 'Pages' on, 2008 aluminium MacBook running OSX El Capitan 10.11.4

  With the help of Mac 'Pages '.

  A typing mistake?

  If it is and you mean Photos Date of Mac are modified by selecting the photos using the Image menu == > adjust the time and date of order and changes made to the metadata such as keywords, location, etc. are made by selecting the photos and find the info and registering metadata in the Info window

  These are detailed in the help topics of pictures - a good place to look for help on the Photos

  View and add information about the photos

  You can view and add information about your photos. For example, you can see the date and time a photo was taken, the information about the camera that took the photo and badges that indicate the status of the photo. You can assign titles and captions to photos, add or change the location of the photos and change the date and time for them information. You can select multiple photos in an instant and add or change information about them all at once.

  Open pictures for me

  View and add information about the photos

  To view or change information for the photos, you select one or more photos, and then open the information window.

  • Open the Info window: Double-click a photo to view it, and then click the Info button in the toolbar or press on command I.
  • Add or change information: Change the following.
    • Title: Enter a name in the title field.
    • Description: In the Description field, type a caption.
    • Favorite: Click the Favorites button to mark the photo as a favorite. Click the button again to deselect.
    • Keywords: Enter the keywords in the keywords field. When you type, Photos suggest keywords that you have used before. Press enter when you have finished a keyword. To remove a keyword, select it and press DELETE.
    • Faces: Click on and type a name to identify a face. Click on several times, and then drag the identifier of the face different faces to identify many faces in a photo.
    • Location: Enter a location in the location field. When you type, Photos suggest places you can choose. To change a location, you can search a different location or change the location by dragging a PIN on the map. To remove location information, delete it or choose Image > location, then choose Remove location or back to the original location. You cannot assign a location if your computer is not connected to the Internet.

  Show titles, other metadata and badges

  Change the date and time of photo

  You can change the date and time associated with a picture. You can do this if you are traveling to a location in another time zone, and your camera affect your dates photos and periods that are correct for your House, but not the place you visited.

  1. Select the photos you want to edit.
  2. Choose Image > adjust Date and time.
  3. Enter the date and time you want in the modified field.
  4. Click a time zone on the map, if necessary.
  5. Click on adjust.

• get a dotted line around .swf files in my flash site now. This is new from Firefox 3. With the help of 4 on a MacBookPro. tried the fix "style no outline. does not work. any help?

  Question
  get a dotted line around .swf files in my flash site now. This is new from Firefox 3. With the help of 4 on a MacBookPro. tried the fix "style no outline. does not work. any help?

  Ah, quite understand now that I added to my doc html

  < style type = "text/css" >
  {body
  background-color: #FFF;
  }
  "'object {outline: none ;}"} '

  < / style >