Similar Questions

• With the help of Microsoft Office 2003 in Windows 7 that has been changed in Windows XP

  The company I work for recently had to buy a new computer because our hard drive crashed.  We were accustomed to using Windows XP, so the newcomer with Windows 7, but they managed to install Windows XP on it, which is good, since that's what we are used to.  However, the new computer came with OpenOffice and not Microsoft Word or Excel.  Some of the functionality is the same, but it is quite different and slows me down because the formatting of the documents is not the same and we don't have time to reformat all of our existing documents.  We have been using Word 2003 and Excel 2003.  Can someone tell me if buy us Microsoft Office 2003, if it will work on our existing Windows 7 with Windows XP change?  If so, our existing documents created in the 2003 version will remain unchanged or anyway should I reformat them?  Any help you can provide is MUCH appreciated.  Thank you!

  If your company has put Windows XP on it - which was a 100% wipe.  This computer has no idea that he had never Windows 7 top because it cannot read some sticker is on it (product key/certificate of authenticity), nor can it read the invoice which was purchased with it.

  When they suffered the (formatted) system and installed Windows XP pn it cleanly and updated it - they should have installed other software you needed in the context of your work.  Which probably included Office 2003.

  OpenOffice is free - anyone can get it.  If you own a license for Microsoft Office 2003, you do not - you might have installed on Windows 7, or you can install it on Windows XP now. (License and support).

• Help? With the help of file system Ext3 on key USB on Linux RT target

  We have been affected by problems with the SD cards and USB drives formatted in FAT32 on some devices, according to Linus RT of long-term monitoring (mainly the cRIO-9035). It seems that readers are vulnerable to fluctuations in current and unexpected reboots (which are inevitable on these sites). Write aborted operations make the damaged discs, thus sabotaging logging after reboot.

  We have identified two solutions; implement both gives the best redundancy:

  (1) installation of UPS (uninterrupted power supply for emergency supplies/batteries) - done

  (2) using the file system apparently more robust 'ext3', which is available on the target RT Linux (FAT32, ext2 and ext3) - don't have not so far:

  ->, I was not able to properly format a USB stick for ext3. I use the MiniTools Partition Manager and don't get any errors when create and format partitions. But they appear as 'read only' when it is inserted into the chassis of the RT. All attempts to access it, other than to observe the empty folder sdxx in ' / media "is returning errors.

  Someone had a bit of luck with the help of ext3 disks formatted as data drives on the objectives of the RT Linux? It is worthwhile to solve my problems or should I use FAT32 and the observed risk?

  I do not consider this but a temporary solution:

  I ran into issues when you use MiniTools Partition Wizard to partition and format my thumb on Win10 records. An unidentified change makes the inaccessible disks and freeze the browsing of file on the PC when I try to delete the partition. It was quite annoying!

  I decided to try another partition tool and went for the EaseUs Partition Master (free version for the moment). I formatted successfully one of the troublesome discs with it (to add some uncertainty to the solution, I used another brand sp * banking, new PC to do). The reader now mounted in read-write and allows the startup application create the I want to store files in folders.

  I'm very curious to know the difference between the tools of both partitions and their formatting...

• With the help of Vista on the laptop. Receive 3 updates on initialize to the top & stop. Do not install. Party at 3 x through process 80070002. How to fix?

  With the help of Vista on the laptop. Receive 3 updates on initialize to the top & stop.  Do not install.  Party at 3 x through process 80070002. How to fix?  3 updates failed to install: KB2779562, KB2705219 and KB2722913.  Constantly configures updates during startup and shutdown.  Takes a long time for the two workers.  Can anyone give advice?

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and 80070002 in C:\Windows\Windowsupdate.log.

• With the help of 1.7.0_07 - b11 version JRE Java hotspot Client VM

  I can't use by net cooking system indicates error java and java download does not work with my system with windows 7 giant premium 64 bit computer laptop.

  REPRT ERROR:

  Java plug-in 10.7.2.11
  With the help of 1.7.0_07 - b11 version JRE Java hotspot Client VM
  Home Directory user = C:\Users/
  ----------------------------------------------------
  c: clear console window
  f: finalize objects on the finalization queue
  g: garbage collection
  h: display this help message
  l: dump classloader list
  m: print memory usage
  o: trigger logging
  q: Hide console
  r: reload the policy configuration
  s: dump system and deployment properties
  t: dump thread list
  v: dump thread stack
  x: delete the cache of class loaders
  0-5: set the trace level

  Hello

  1 are you facing this problem with a specific Web site?
  2 are you having the same problem on other browsers as well?
  Please follow the links below to solve the problem.
  Method 1
  How to troubleshoot script errors in Internet Explorer
  http://support.Microsoft.com/kb/308260
  Note: follow the steps as troubleshooting applies to JAVA issues.
  Step 2
  How to enable Java in my web browser?
  http://www.Java.com/en/download/help/enable_browser.XML
  Method 2
  If you still face problems, please uninstall and reinstall JAVA
  Remove all traces of the failure of the Java installation by uninstalling Java:
  
  http://www.Java.com/en/download/help/uninstall_java.XML
  Install Java
  http://www.Java.com/en/download/index.jsp
  I hope this helps.

• My AirPort Extreme end not implemented with the help of AirPort Utility

  Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.

  When I try to set up as a Wireless extender...

  Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?

  .. .it will not accomplish the synchronization upward with AirPort Utility.

  Which version of AirPort Utility?  If it's on your Mac... and you don't know what version you have...

  Open AirPort Utility

  Click the AirPort Utility menu in the upper left corner of the screen

  Click on about AirPort Utility

  Report on the version number you see here

  You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?

• With the help of iPhone 6 s. try to copy the text message with a tap double and get a bubble with icons. How can I copy the message to paste in another?

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  maryml wrote:

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  Press and hold on the text and wait for the copy/more pop up.

• With the help of Club running on the Nike watch +.

  Hello

  This is something I have tried to work for a while and have not yet been able to find an answer. At the moment I use Nike + management club on my iPhone to follow the tracks that I find that gps is better than just using the application of the workout on my watch. However, something that really bothers me is that I start the race on my phone, but I can't then view my stats while running without having to press on and tap the watch and wait for the application to load, very irritating to race. I want to be able to lift my wrist and live stats are there to watch me, not listening and not get my phone out of my pocket. Surely this is something that can make the original watch?

  As a separate issue with the new app, Nike +, it does not recognize the songs I downloaded on my phone of Apple music in my playlists, then I have to play the separatelay of music through the application of music as opposed to go with Nike +? The ides on how to fix or is this a known problem with the latest Nike + app?

  Hello

  You may find it useful to consult the support resources of Nike and/or contact Nike for assistance with the help of their application:

  • Contact Nike (support is available by phone and via social media):
    • https://support-en-us.nikeplus.com/app/contact/l/4/t/4462/
  • Nike + running Club to support:
    • http://nikeplus.com/support/

  More information:

  https://iTunes.Apple.com/us/app/Nike+-run-Club/id387771637?Mt=8

• With the help of old gear series noon on El Capitan

  I have a Vox Tonelab SE effects audio Board (around 2004), there the old serial midi on the back ports. I hung with the help of a USB MIDI interface cable. While the USB Midi interface to the show in Audio / Midi set upward and also in the profile system for USB port it does not detect the Vox Tonelab so no communication lunch.

  There is a POWERPC application called ToneLabSE SoundEditor which I downloaded and installed in the hope he would install a driver but I guess that this obviously doesn't work on INTEL in any case. Using Wine I can run the PC version, but still no communication via midi.

  Someone at - it ideas, would like to get this Panel communicating effects via MIDI.

  Thank you

  

  

  

  Solved! Using the WINE app I've run the version of the PC of ToneLab SE editor application. So pretty unintuitively by changing the serial midi to USB, SERIAL interface cables that went to the and out on the Tonelab SE. Now of the Se ToneLab editor I can write banks of programs to hardware Tonelab, but unable to empty the banks since the material Tonelab to software. My main desire was to use Expression pedals on the Tonelab as Midi Ableton controllers and some of the switches to the control of the Looper stomp. Now I can do it all. Hooray!

• With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

  With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

  Opening was a pro the Pro amateur-oriented or serious app, usually shooting Raw, probably on a digital SLR.

  If that's you then pictures will miss a lot for you.

  If this isn't the case, then opening was probably overkill for your needs.

  If you like the pictures then this is the way to go.

• Thunderbird will only connect if stop then reopened. (With the help of Mac 10.9.4)

  With the help of Mac 10.9.4
  If I open Thunderbird, I can connect to my e-mail address and download the messages. If I select "Get Mail" once again, Thunderbird crashes and fails to connect to my emails. If I then close Thunderbird and re-open it, I'm able to immediately connect to my mail.

  It seems to have sorted itself after a few days. (Fingers crossed). Until today it worked properly. Will keep an eye on things for the next week and the report does so again.

• Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Would you like to share why you must do a clean install?

  You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.

• ow change titles & dates of lots of pictures (like in iPhoto?) With the help of Mac 'Pages' on, 2008 aluminium MacBook running OSX El Capitan 10.11.4

  How to change titles & dates of lots of pictures (like in iPhoto?) With the help of Mac 'Pages' on, 2008 aluminium MacBook running OSX El Capitan 10.11.4

  With the help of Mac 'Pages '.

  A typing mistake?

  If it is and you mean Photos Date of Mac are modified by selecting the photos using the Image menu == > adjust the time and date of order and changes made to the metadata such as keywords, location, etc. are made by selecting the photos and find the info and registering metadata in the Info window

  These are detailed in the help topics of pictures - a good place to look for help on the Photos

  View and add information about the photos

  You can view and add information about your photos. For example, you can see the date and time a photo was taken, the information about the camera that took the photo and badges that indicate the status of the photo. You can assign titles and captions to photos, add or change the location of the photos and change the date and time for them information. You can select multiple photos in an instant and add or change information about them all at once.

  Open pictures for me

  View and add information about the photos

  To view or change information for the photos, you select one or more photos, and then open the information window.

  • Open the Info window: Double-click a photo to view it, and then click the Info button in the toolbar or press on command I.
  • Add or change information: Change the following.
    • Title: Enter a name in the title field.
    • Description: In the Description field, type a caption.
    • Favorite: Click the Favorites button to mark the photo as a favorite. Click the button again to deselect.
    • Keywords: Enter the keywords in the keywords field. When you type, Photos suggest keywords that you have used before. Press enter when you have finished a keyword. To remove a keyword, select it and press DELETE.
    • Faces: Click on and type a name to identify a face. Click on several times, and then drag the identifier of the face different faces to identify many faces in a photo.
    • Location: Enter a location in the location field. When you type, Photos suggest places you can choose. To change a location, you can search a different location or change the location by dragging a PIN on the map. To remove location information, delete it or choose Image > location, then choose Remove location or back to the original location. You cannot assign a location if your computer is not connected to the Internet.

  Show titles, other metadata and badges

  Change the date and time of photo

  You can change the date and time associated with a picture. You can do this if you are traveling to a location in another time zone, and your camera affect your dates photos and periods that are correct for your House, but not the place you visited.

  1. Select the photos you want to edit.
  2. Choose Image > adjust Date and time.
  3. Enter the date and time you want in the modified field.
  4. Click a time zone on the map, if necessary.
  5. Click on adjust.

• get a dotted line around .swf files in my flash site now. This is new from Firefox 3. With the help of 4 on a MacBookPro. tried the fix "style no outline. does not work. any help?

  Question
  get a dotted line around .swf files in my flash site now. This is new from Firefox 3. With the help of 4 on a MacBookPro. tried the fix "style no outline. does not work. any help?

  Ah, quite understand now that I added to my doc html

  < style type = "text/css" >
  {body
  background-color: #FFF;
  }
  "'object {outline: none ;}"} '

  < / style >

• With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp.

  With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

  bjmrao wrote:

  With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

  Please ask Whatapps since you use their app.