With the help of HP recovery disks

Similar Questions

• With the help of product recovery CD when the hard drive replaced

  Hi all

  It seems that my hard drive is defective, so I bought a replacement, installed in the laptop OK and tried to use the Toshiba product recovery disc. The laptop started with the disc OK and recovery of product starting screen appeared and I started the process. The process starts, but then crashes and no matter how much time wait nothing further happens.

  I put the defective hard drive, back to and started on the recovery disk and it started and the process started OK.

  The recovery disc can not be used on a replacement hard drive? Surely, this is possible, as hard drives do fail and must be replaced.

  Can someone tell me how to fix it please?

  Thanks in advance!

  In General, you can use recovery image after replacing HARD drive. I did the same thing on my machine.
  It was: is the new HARD drive recognized properly? After Exchange of HDD enter BIOS and check this.
  Before you begin the recovery image installation if please try to set the BIOS to the default settings and try reinstalling the recovery image.

• I need to restore the with the Toshiba Satellite P200 recovery disk

  I also need to restore my P200 with the Toshiba CD. There is a note on the Pocket: insert the CD, power off, turn on with press F12, select the drive and follow the explanations. I wonder if it is possible to reformat just the 2nd disc.

  I can confirm what sascha wrote. I have Satellite A300 with 2 hard drives and via recovery DVD you can simply install OS on the first HARD disk. The second HDD is not visible for a second and Toshiba software engineers have designed to work with the first HARD disk only.

• With the help of DVD Recovery Win7 to bring satellites L850 - 1 9 'Out of the Box "?

  Hello
  I am using the recovery DVD for my Satellite - 1 9, PSKDLE L850, to replace my HD in the State.

  Even if the hidden partition was here, I always had errors, e.g. F3-F200-0002.
  But it wasn't the only one.
  Right now, I'm wiping the HD to give it the appearance of being a replacement HD, which lasts about 5 hours.

  I am unable to identify any docs on how to properly use the DVD online.
  Can someone give me a link that I seem to be using the wrong argument to search on my Android tablet.
  Thanks in advance.

  Concerning
  Andy

  Hi Andy

  How to install recovery image is described on follow Toshiba document - http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

  Please test once more and not sure that start you the installation of recovery with disk number 1 (if you have several of them).
  Post comments please.

  By the way: error message described can be demonstrated if the HARD drive is not OK.

• With the help of laptop recovery

  I have a Pavilion laptop G7. It came with a recovery on the hard drive partition as well as instructions on how to create a recovery media.

  Just two questions:

  (1) other that using different steps, is there a difference between the use of the partition of the drive against the media created in what is the final result?

  (2) only two methods recreate a new recovery hard disk partition or the process leaves the original intact?

  Hello

  I know what you mean, however when you create a set of recovery media, a change is written on the hard disk recovery Partition which saves this has been done and will not allow another series to be created - this change is also registered in your recovery media, because it is created if use you this media to reinstall the OS and so recreate the hard disk recovery partition , he'll always know the media has been created and will not allow another series to do.

  However, there is always the possibility of using an application third such an ImgBurn to create (and therefore be able to re - write) an Image of your media - guides that are here.

  Perhaps the best option if you are using Windows 7 is to simply create a disk Image using the option described here.

  Kind regards

  DP - K

• With the help of Workstation 6 disks in ESX 3.5

  Hello

  I read on the displacement of the Workstation to ESX from VMWare KB disks (KB article: 900). I tried to use the vmkfstools - i, but I always found with a wrong format.

  Should what settings I give the vmkfstools to be able to use the disks in ESX 3.5?

  I don't have a license to the converter, or I can buy one.

  Kake says:

  The free version is unable to convert a physical machine directly ESX...

  In fact, it can.  However, you can do a "remote" converted to a physical machine.  You must install the converter on the machine that you want to convert and run it from there, select "local computer", then you're allowed ESX as destination.

• To create the distribution with the help of disk manager.

  Dear all, I m facing problem with blue screen error. And my all partitions is corrupted and I like repartition with the help of disk manager. Win xp bootable cd its not working. so pls help thank you & best regards

  Hi zubair.

  · What is the exact blue screen error you receive?

  · What happens when you try to boot from the CD?

  · You want to reinstall or restore the system?

  · Do you remember any changes made on your computer before the show?

  · Are you able to boot to the desktop?

  · You have saved the data?

  You can check the links below: how to use disk management to configure basic disks in Windows XP:http://support.microsoft.com/kb/309000

  How to partition and format a hard disk using the Windows XP Setup program:http://support.microsoft.com/kb/313348

  Best practices for partitioning a hard drive:http://www.microsoft.com/windowsxp/using/setup/expert/tulloch_partition.mspx

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Would you like to share why you must do a clean install?

  You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.

• IRQL_NOT_LESS_OR_EQUAL blue screen. No luck with the help, can't "Repair computer". Help, please!

  Whole new generation that has been very well,

  Mobo: EVGA P55 SLI,

  Processor: Intel Core i7 860,

  RAM: Mushkin matched 2 X 2 = 4 GB

  PS: Blue Antec 750W

  GPU: EVGA Nvidia GTX 260 SLI (x 2)

  HD' Samsung 750Go (x 2) RAID 1

  DVD RW

  Blue Ray RW

  OS: Vista Edition Home Premium 64-bit

  System has been great from the GET go, there are more than 2 weeks. Never a failure to the no boot, no lock ups etc. Woke up in the middle of the night last week with cmptr attempt to restart. No new software or hardware installed had been. Nothing worked, quiet dampened.

  From there on, I was not able to start Windows.

  I entered the BIOS and tried to start a well known point... nothing. Always get blue screen. I have reset the CMOS on the mobo, removed the battery on the mobo and reinstalled. I unplugged the two hard drives power and SATA cables, bought a NEW (third) HD and installed, with only one new HD connected, with a full version of Windows Vista DVD in the CD/DVD drive, tried to boot Windows from scratch... still get the blue screen?

  Blue screen says:

  A problem has been detected and Windows has shut down to prevent damage to your computer.

  IRQL_NOT_LESS_OR_EQUAL

  If this is the first time...

  Check that any hardware or software is installed correctly.

  technical info:

  STOP: 0X0000000A

  (0xFFFFFA8D839EFB18),

  (0 x 0000000000000002),

  (0 x 0000000000000001),

  (0xFFFFF8000A481DD2)

  I was able to run the memory test and it came back without errors. I was not able to get to "repair your computer", as the beginning is never far away. When the computer reboots, it comes to the sequence: normal mobo beeps (five) than even that when the system was working fine... then I get the graph of the mobo splash screen EVGA P55 SLI,... then black screen with "Windows loading files"... which appears just above the loading bar (it looks like gage fuel fill from left to right).

  Once the bar then "fills" Blue Screen of Death!

  It's EXTREMELY frustrating because it was built for me by an employee of INTEL (very smart read), all latest drivers etc. Very little software loaded on the system. Most of the aid that I read guess you can operate within Windows already... Catch 22! I can't!

  Hello

  You get beeps when it worked? This is not normal.

  Computer MESSAGE / beep codes
  http://www.computerhope.com/beep.htm

  =======================================

  Think that material:

  Added new hardware, updated drivers to date (don't forget to check in Control Panel - Windows Updates - pilot
  updates), or add key software lately? Pilots and security/antivirus/antispyware products are also likely
  suspects. Next message is my generic driver updated methods to use when you get to this section of the
  troubleshooter.

  You can access Mode without fail - repeatedly press F8 as you start - last good configuration or system restore known?

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  Look in the Event Viewer to see if something is reported on these reboots.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  BCCode: a

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  Solve the problem

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.
  2. Press F8 to character-based menu that displays the choice of operating system.
  3. In the Windows Advanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
  2. Try disabling the cache in memory of the BIOS.
  3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
  4. Make sure that the latest Service Pack is installed.
  5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
  6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

  If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

  -------------------------------------------------------------------------

  It is my generic troubleshooting tool and can probably give more specific help when you give the ICC codes.

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• new laptop does not start with the boot CD or DVD disk

  HP Pavilion laptop computer g6 brand new windows 7 Home premium 64-bit.  Updates Windows, updating the Bios and Telus security installed, otherwise the system is factory.

  I'd like to partition the hard drive partitions with Partition Wizard on a boot disk, maximum because I don't need a 650 GB partition to do the maintenance on more I like to keep my data and other separate files of my operating system.

  The DVD drive is set to boot first.  The DVD player works (made recovery discs, checked the content on the CD, etc.).

  What happens when I try to boot using the CD or DVD - the DVD drive sounds like it is being accessed, then stops and I get a blue screen. This happens as well with the diskette in the partition Wizard and recovery disks.  Whenever I start even if the bios is set to boot from the first DVD I press the esc key and reset the DVD to start everything first.

  I checked the disk the wizard partition on a desktop PC and it works fine.  I updated the bios after checking on the internet, as was the fix for this issue.  It don't did not help me.

  It took me a while, but I thought about it.  The laptop and DVD player with Windows 7 can't read a bootable disc, made by another computer.  It won't even read a USB stick formatted by another computer (Windows XP).

  What a pain.

• With the help of MS PRO Duo into the slot of the Satellite A200 MDMC

  I have a problem when inserting a Memory Stick PRO Duo SanDisk (512 MB) card with the help of Memory Stick Duo adapter in the card of my Satellite A200 - 1 M 8 (PSAE6) on Windows Vista Edition Home Premium.
  The device includes the insertion of the card (Windows notifies with the sound and the icon in the notification area).
  But then the computer window starts flashing and I can't open the disk of the card. OS always says insert the card in the card slot opening.

  I found the following statement in the manual of the laptop (Chapter 8 - optional devices):
  Memory Stick Duo/PRO Duo and Memory Stick adapter are not compatible with the multiple digital media card slot. :(

  But before that, I found this thread in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=101843𘷓
  The guy said that he has been successful and his position has been marked as the answer!

  Anyone know how to use MS PRO Duo in the locations of memory A-200?
  Thanks in advance.

  I put t believe that!
  First the user manual it says:
  -Memory Stick * PRO Duo *.
  -Memory Stick * Duo *.

  cards or adapters are not compatible with the multiple digital media card slot.
  In this case you cannot use the possibilities mentioned above!
  See the list given by Juan28 in the other thread.

  What you can do is to use the * Memory Stick * or * cards Memory Stick Pro *.
  I don't know but maybe the cards Memory Stick or Memory Stick Pro m is available for the Memory Stick Duo or Memory Stick Duo PRO working but to be honest I don t think so.

• Help? With the help of file system Ext3 on key USB on Linux RT target

  We have been affected by problems with the SD cards and USB drives formatted in FAT32 on some devices, according to Linus RT of long-term monitoring (mainly the cRIO-9035). It seems that readers are vulnerable to fluctuations in current and unexpected reboots (which are inevitable on these sites). Write aborted operations make the damaged discs, thus sabotaging logging after reboot.

  We have identified two solutions; implement both gives the best redundancy:

  (1) installation of UPS (uninterrupted power supply for emergency supplies/batteries) - done

  (2) using the file system apparently more robust 'ext3', which is available on the target RT Linux (FAT32, ext2 and ext3) - don't have not so far:

  ->, I was not able to properly format a USB stick for ext3. I use the MiniTools Partition Manager and don't get any errors when create and format partitions. But they appear as 'read only' when it is inserted into the chassis of the RT. All attempts to access it, other than to observe the empty folder sdxx in ' / media "is returning errors.

  Someone had a bit of luck with the help of ext3 disks formatted as data drives on the objectives of the RT Linux? It is worthwhile to solve my problems or should I use FAT32 and the observed risk?

  I do not consider this but a temporary solution:

  I ran into issues when you use MiniTools Partition Wizard to partition and format my thumb on Win10 records. An unidentified change makes the inaccessible disks and freeze the browsing of file on the PC when I try to delete the partition. It was quite annoying!

  I decided to try another partition tool and went for the EaseUs Partition Master (free version for the moment). I formatted successfully one of the troublesome discs with it (to add some uncertainty to the solution, I used another brand sp * banking, new PC to do). The reader now mounted in read-write and allows the startup application create the I want to store files in folders.

  I'm very curious to know the difference between the tools of both partitions and their formatting...

• With the help of the stationary state how can w/XP, I enable Spanish keyboard for the user?

  My daughter has a Spanish class this is why we have installed a panel of Spanish key for that topic.  I loaded Microsoft steady state to control what she uses, changes, etc... make his story on the computer.  With the help of most all the restrictions that she does not see its Spanish keyboard.  How to activate the Spanish keyboard while steady state is to limit what she can get.  We want only that she go to his school work, loaded on the hard disk and not much more.  The Spanish keyboard is essential for this class.

  Microsoft SteadyState has been abandoned and is no longer supported.

• How to create the ISO image of windows 8 with the help of boot, efi, sources, and support files

  Hello
  I followed folders in my USB key:

  Boot
  EFI
  Sources
  Support,

  and the following files:

  Setup
  Bootmgr.EFI
  Bootmgr

  How can I create an ISO image of windows 8 with the help of these files and folders. I even installed ADK, but I couldn't keep up with it.
  I would be very grateful if someone could help me out here.

  Secondly, I would also like to know how to create a system image of WINDOWS 8, where the hard drive breaks down.

  Concerning
  MAK

  If you have the upgrade key, go here

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  You can go for the use of win8 / win7 / vista to match highlights you want - and download the win8 installation and run the installation with your key to download you need to install windows from that.  Will allow you to have an iso bootable.

  Make a picture of the control panel system / Windows 7 file recovery / system Image.  I certainly wouldn't put it on dvd.  It will be too.   Find an old preference portable hard drive and buy a $ 20 usb box, get an external hard drive.

• With the help of AUSST - latest updates of Adobe CC 2014 are not uploaded to the server - how to solve this problem?

  With the help of AUSST - latest updates of Adobe CC 2014 are not uploaded to the server - how to solve this problem?

  I tried both incremental and train to do a fresh install (. / AdobeUpdateServerSetupTool - root = "/ serverroot/updates / Adobe / CS '-fee)

  If anyone can answer this - please let me know.

  Hi Mark,

  Try to refresh the web server and run the AUSST with cool switch. In addition, please make sure that you have enough disk space available in the location of the server.

  Thank you

  Ashish