With the help of Workstation 6 disks in ESX 3.5

Similar Questions

• With the help of Manager Update to upgrade ESX 5.1 to 5.5 - conflicting ERROR VIBS

  
  Hello

  I hope someone can help. I have a number of 5.1 ESX host that I would spend 5.5 using the Update Manager which seems straight forward enough... right

  vCentre is 5.5

  Import the ESXi ISO to update manager

  Create a baseline

  Attach the base to the host to be upgraded

  Analyze and correct the

  .... Simple

  The problem I have is that use us the HP Custom image because they are all servers in HP, sense, right. I downloaded the HP 5.5 Custom ISO Image from the VMWare site and imported from the ISO to the Update Manager, created a base line, attached to a host of test (DL585 G5) and scan. IM presented then an incompatible warning and details show below

  

  I searched the net for a solution and found several contradictory entries on dealing with VIBs and creating custom ISOs, I also downloaded the ZIP of the Depot HP ESX file and created a custom ISO that does not work either.

  Here are the current Broadcom VIBs installed on my ESX host, test

  

  I can not also remove the contradictory VIBs because they are network card drivers and if I delete and restart the host does not have network cards (well Yes, I tried).

  Its been 2 days of pulling my hair and maybe I'm missing something simple.

  Anyone have any ideas?

  Thank you

  DCurrie,

  I'm in the same boat as you. I all hosts in HP DL380s I have migrated my hosts to test on my server to vCenter 5.5 U1 and went to perform the upgrade on the hosts of 5.1. I had everything first to apply the latest patches on the 5.1, which then allowed me to level 5.5.0 of the host. I then had another set of patches that I applied (assuming that I had to do before moving to 5.5.1). After the implementation of those, I still 5.5.1 an incompatible upgrade.

  The upgrade contains the following set of contradictory VIBs:

  Broadcom_bootbank_net - bnx2_2.2.5dv55.2 - 1OEM.550.0.0.1331820

  Remove the conflicting VIBs, or use the Image Generator...

  Then, I could at least make at 5.5.0, but not more than details. Both used 5.5.0 and 5.5.1 ISOs are ISOs of OEM HP.

  I have currently installed bnx2_2.2.4f.v55.3.

  HP has like downloadable bnx2_2.2.3t.v55.7 under the heading vSphere 5.5.

  VMware under the HCL has several versions, including my current version and the bnx2_2.2.5d.v55.2.

  Since this is test, I'll play with it some more and see what I can understand.

  ----------------------------------------

  Update: from U1b 5.5 Release Notes

  Update Manager reports the status of compliance as Incompatible when scanning or clean up ESXi 5.x hosts in a HA cluster

  When you perform an upgrade ESXi 5.x hosts belonging to a HA cluster analysis, Update Manager can report on the status of compliance of the incompatible host and might not allow the hosts to be remediated. Inconsistent compliance status is because of the way the agent of FDM (HA) is installed on ESXi 5.x hosts. From vSphere 5.0, the FDM agent is installed on the hosts ESXi as a VIB. When a VIB is installed or updated on an ESXi host, a flag is set to indicate that the bootbank on the host has been updated. Update Manager checks this flag while performing an analysis to level or sanitation and requires this flag to be cleared before the upgrade of a host. The flag can be cleared by restarting the host.

  Solution: restart guests reporting the State of compliance as Incompatible. Run the analysis of upgrading or rehabilitation after the host comes back online.

  Will try this and let you know how it goes.

• With the help of HP recovery disks

  I install a new hard drive in my computer HP 1734c because the original cannot. I made 2 discs in my program of recovery for Vista. I noticed that after I created records that the first disc has no information about it but the 2nd disc has about 2.6 GB of info. Since only, I can do these recovery disks once and when I try to install the Vista program on the new drive it will not install, probably because he has no information about it, what can I do in addition to buy a new copy of Windows?

  For replacement media, please see: order of recovery discs for Windows 7, Vista or XP

  Carey Frisch

• To create the distribution with the help of disk manager.

  Dear all, I m facing problem with blue screen error. And my all partitions is corrupted and I like repartition with the help of disk manager. Win xp bootable cd its not working. so pls help thank you & best regards

  Hi zubair.

  · What is the exact blue screen error you receive?

  · What happens when you try to boot from the CD?

  · You want to reinstall or restore the system?

  · Do you remember any changes made on your computer before the show?

  · Are you able to boot to the desktop?

  · You have saved the data?

  You can check the links below: how to use disk management to configure basic disks in Windows XP:http://support.microsoft.com/kb/309000

  How to partition and format a hard disk using the Windows XP Setup program:http://support.microsoft.com/kb/313348

  Best practices for partitioning a hard drive:http://www.microsoft.com/windowsxp/using/setup/expert/tulloch_partition.mspx

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Would you like to share why you must do a clean install?

  You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.

• With the help of MS PRO Duo into the slot of the Satellite A200 MDMC

  I have a problem when inserting a Memory Stick PRO Duo SanDisk (512 MB) card with the help of Memory Stick Duo adapter in the card of my Satellite A200 - 1 M 8 (PSAE6) on Windows Vista Edition Home Premium.
  The device includes the insertion of the card (Windows notifies with the sound and the icon in the notification area).
  But then the computer window starts flashing and I can't open the disk of the card. OS always says insert the card in the card slot opening.

  I found the following statement in the manual of the laptop (Chapter 8 - optional devices):
  Memory Stick Duo/PRO Duo and Memory Stick adapter are not compatible with the multiple digital media card slot. :(

  But before that, I found this thread in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=101843𘷓
  The guy said that he has been successful and his position has been marked as the answer!

  Anyone know how to use MS PRO Duo in the locations of memory A-200?
  Thanks in advance.

  I put t believe that!
  First the user manual it says:
  -Memory Stick * PRO Duo *.
  -Memory Stick * Duo *.

  cards or adapters are not compatible with the multiple digital media card slot.
  In this case you cannot use the possibilities mentioned above!
  See the list given by Juan28 in the other thread.

  What you can do is to use the * Memory Stick * or * cards Memory Stick Pro *.
  I don't know but maybe the cards Memory Stick or Memory Stick Pro m is available for the Memory Stick Duo or Memory Stick Duo PRO working but to be honest I don t think so.

• Help? With the help of file system Ext3 on key USB on Linux RT target

  We have been affected by problems with the SD cards and USB drives formatted in FAT32 on some devices, according to Linus RT of long-term monitoring (mainly the cRIO-9035). It seems that readers are vulnerable to fluctuations in current and unexpected reboots (which are inevitable on these sites). Write aborted operations make the damaged discs, thus sabotaging logging after reboot.

  We have identified two solutions; implement both gives the best redundancy:

  (1) installation of UPS (uninterrupted power supply for emergency supplies/batteries) - done

  (2) using the file system apparently more robust 'ext3', which is available on the target RT Linux (FAT32, ext2 and ext3) - don't have not so far:

  ->, I was not able to properly format a USB stick for ext3. I use the MiniTools Partition Manager and don't get any errors when create and format partitions. But they appear as 'read only' when it is inserted into the chassis of the RT. All attempts to access it, other than to observe the empty folder sdxx in ' / media "is returning errors.

  Someone had a bit of luck with the help of ext3 disks formatted as data drives on the objectives of the RT Linux? It is worthwhile to solve my problems or should I use FAT32 and the observed risk?

  I do not consider this but a temporary solution:

  I ran into issues when you use MiniTools Partition Wizard to partition and format my thumb on Win10 records. An unidentified change makes the inaccessible disks and freeze the browsing of file on the PC when I try to delete the partition. It was quite annoying!

  I decided to try another partition tool and went for the EaseUs Partition Master (free version for the moment). I formatted successfully one of the troublesome discs with it (to add some uncertainty to the solution, I used another brand sp * banking, new PC to do). The reader now mounted in read-write and allows the startup application create the I want to store files in folders.

  I'm very curious to know the difference between the tools of both partitions and their formatting...

• With the help of the stationary state how can w/XP, I enable Spanish keyboard for the user?

  My daughter has a Spanish class this is why we have installed a panel of Spanish key for that topic.  I loaded Microsoft steady state to control what she uses, changes, etc... make his story on the computer.  With the help of most all the restrictions that she does not see its Spanish keyboard.  How to activate the Spanish keyboard while steady state is to limit what she can get.  We want only that she go to his school work, loaded on the hard disk and not much more.  The Spanish keyboard is essential for this class.

  Microsoft SteadyState has been abandoned and is no longer supported.

• With the help of AUSST - latest updates of Adobe CC 2014 are not uploaded to the server - how to solve this problem?

  With the help of AUSST - latest updates of Adobe CC 2014 are not uploaded to the server - how to solve this problem?

  I tried both incremental and train to do a fresh install (. / AdobeUpdateServerSetupTool - root = "/ serverroot/updates / Adobe / CS '-fee)

  If anyone can answer this - please let me know.

  Hi Mark,

  Try to refresh the web server and run the AUSST with cool switch. In addition, please make sure that you have enough disk space available in the location of the server.

  Thank you

  Ashish

• My AirPort Extreme end not implemented with the help of AirPort Utility

  Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.

  When I try to set up as a Wireless extender...

  Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?

  .. .it will not accomplish the synchronization upward with AirPort Utility.

  Which version of AirPort Utility?  If it's on your Mac... and you don't know what version you have...

  Open AirPort Utility

  Click the AirPort Utility menu in the upper left corner of the screen

  Click on about AirPort Utility

  Report on the version number you see here

  You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?

• With the help of iPhone 6 s. try to copy the text message with a tap double and get a bubble with icons. How can I copy the message to paste in another?

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  maryml wrote:

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  Press and hold on the text and wait for the copy/more pop up.

• With the help of Club running on the Nike watch +.

  Hello

  This is something I have tried to work for a while and have not yet been able to find an answer. At the moment I use Nike + management club on my iPhone to follow the tracks that I find that gps is better than just using the application of the workout on my watch. However, something that really bothers me is that I start the race on my phone, but I can't then view my stats while running without having to press on and tap the watch and wait for the application to load, very irritating to race. I want to be able to lift my wrist and live stats are there to watch me, not listening and not get my phone out of my pocket. Surely this is something that can make the original watch?

  As a separate issue with the new app, Nike +, it does not recognize the songs I downloaded on my phone of Apple music in my playlists, then I have to play the separatelay of music through the application of music as opposed to go with Nike +? The ides on how to fix or is this a known problem with the latest Nike + app?

  Hello

  You may find it useful to consult the support resources of Nike and/or contact Nike for assistance with the help of their application:

  • Contact Nike (support is available by phone and via social media):
    • https://support-en-us.nikeplus.com/app/contact/l/4/t/4462/
  • Nike + running Club to support:
    • http://nikeplus.com/support/

  More information:

  https://iTunes.Apple.com/us/app/Nike+-run-Club/id387771637?Mt=8

• With the help of old gear series noon on El Capitan

  I have a Vox Tonelab SE effects audio Board (around 2004), there the old serial midi on the back ports. I hung with the help of a USB MIDI interface cable. While the USB Midi interface to the show in Audio / Midi set upward and also in the profile system for USB port it does not detect the Vox Tonelab so no communication lunch.

  There is a POWERPC application called ToneLabSE SoundEditor which I downloaded and installed in the hope he would install a driver but I guess that this obviously doesn't work on INTEL in any case. Using Wine I can run the PC version, but still no communication via midi.

  Someone at - it ideas, would like to get this Panel communicating effects via MIDI.

  Thank you

  

  

  

  Solved! Using the WINE app I've run the version of the PC of ToneLab SE editor application. So pretty unintuitively by changing the serial midi to USB, SERIAL interface cables that went to the and out on the Tonelab SE. Now of the Se ToneLab editor I can write banks of programs to hardware Tonelab, but unable to empty the banks since the material Tonelab to software. My main desire was to use Expression pedals on the Tonelab as Midi Ableton controllers and some of the switches to the control of the Looper stomp. Now I can do it all. Hooray!

• With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

  With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

  Opening was a pro the Pro amateur-oriented or serious app, usually shooting Raw, probably on a digital SLR.

  If that's you then pictures will miss a lot for you.

  If this isn't the case, then opening was probably overkill for your needs.

  If you like the pictures then this is the way to go.

• Thunderbird will only connect if stop then reopened. (With the help of Mac 10.9.4)

  With the help of Mac 10.9.4
  If I open Thunderbird, I can connect to my e-mail address and download the messages. If I select "Get Mail" once again, Thunderbird crashes and fails to connect to my emails. If I then close Thunderbird and re-open it, I'm able to immediately connect to my mail.

  It seems to have sorted itself after a few days. (Fingers crossed). Until today it worked properly. Will keep an eye on things for the next week and the report does so again.