With the help of iTunes audio in Keynote

Similar Questions

• With the help of an audio clip to control the timeline

  I have a composition that has two pieces of VO. Each has an associated text block.

  I want to play the first VO when it is clicked on the first text. Then, when the VO ends, I want to fade the first block of text to falter, the second and play the second VO when we.

  I have the updated scenario in place with labels to play through transitions at the end of the first VO. No problem there.

  I have the audio that plays when I click on the blocks of text. Everything is good.

  However, I don't know how to make the calendar before the audio clip at the end play.

  This is the code for the first block of text:

  SYM.$("RUP01_Nar_1") [0]. Play();

  SYM. Play ('Nar2');

  It plays audio but also plays the timeline instantly (so from one to the other, the blocks of text fade as soon as starts the audio).

  I tell myself that I need some kinds of code between who said, essentially, ' wait than the audio finishes then [cheek chronology]. " But like many I tried I can't find anything to do.

  Thanks for your help...

  Thanks for that,

  I gave it a try, but unfortunately it did not work. The audio could not play altogether.

  However, I managed to solve the problem by using the setTimeout function and enter the audio duration as the time-out;

  SYM.$("RUP01_Nar_1") [0]. Play();

  {setTimeout (function ()}

  SYM. (Play ('Nar2')}, 10000);

  This does not mean having to customize the time-out for each clip, but it will serve well for the moment.

• With the help of iTunes and watch a movie

  Hi all

  I wanted to know if its possible to be able to watch a movie and navigate through the iTunes store and other menus of iTunes. I wanted to spend some time checking the movies and shows television while I watch a movie.

  I have the latest version of iTunes and I'm on a PC running Windows 10.

  Thanks for your help on this question everyone

  No, it's one or the other.

• When I try to load a photo CD, nothing happens at all. The same thing happens with the help of CD audio.

  I put my CD in the drive and the only thing that happens is some sound then nothing. The CDs are not load as they did.

  Hello

  Next message will be on automatic/AutoRun reading where it is also a question AFTER you do these:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• With the help of iTunes credit to buy parts of Pokémon

  I want to buy Pokémon go parts using my iTunes credit! my mother has approved purchase but requires then to his credit card details? I want to use my credit on my iTunes account

  As long as your balance covers the total price of the item (including all applicable taxes), and this account is the one who initially downloaded the app, then should be used only from your balance. Have you tried going through purchase to see what is actually loaded? If the credit card (apart from a temporary store to maintain charge) then contact iTunes Support: http://reportaproblem.apple.com

• With the help of iTunes in another device

  I have an Apple ID and Iv'e bought a few for my iPad and iPhone applications.

  My wife has another iPad (3ghas) with a different account identifier Apple and iTunes.

  Is it possible to temporarily buy and use my Apps and buy new applications using iPad my wife with my apple ID account?

  Thank you.

  She invites to family sharing your ID, you can each share each other apps, music... etc.

• With the help of iTunes. How do I do the MP3 from mp4 files - using cds?

  I had a cd I had ripped off music too - initially in iTunes mp4 files.

  I put this cd in my computer and iTunes asked to import the files in.   He said that she already had these files, and I would like to replace them...   I said yes.

  I was hoping that the origianl mp4 files would be replaced by MP3s from my cd - but it wasn't the case.   When I looked in my iTunes folder, to copy them to my sansa, replacement/new files were still all mp4s.

  Currently, in iTunes, if I'm going in Edition > Preferences > import music... the frame is AAC Encoder.   If I change it to MP3 encoder, will be future air imported as MP3 files?  Or should I do something else?

  Advice would be much appreciated...

  Poppy says:

  I had a cd I had ripped off music too - initially in iTunes mp4 files.

  I put this cd in my computer and iTunes asked to import the files in.   He said that she already had these files, and I would like to replace them...   I said yes.

  I was hoping that the origianl mp4 files would be replaced by MP3s from my cd - but it wasn't the case.   When I looked in my iTunes folder, to copy them to my sansa, replacement/new files were still all mp4s.

  Currently, in iTunes, if I'm going in Edition > Preferences > import music... the setting is AAC Encoder.   If I change it to MP3 encoder, will be future air imported as MP3 files? Or should I do something else?

  Advice would be much appreciated...

  I think it's okay from there, they will be imported as MP3 files.

• With the help of several Audio Sources UNLIMITED

  I use LCD TV for my monitor, but also have a plugged separate speaker system to the 3.5 mm jack. I want the computer play sounds through these two sources at the same time, but the control panel will allow me just to use one at a time. How can I fix?

  You can't, in theory.

  However, what you could try is a y jack - plug it into the line-out, then plug your two devices on two catches on the decision-making of y.
  Caution: make sure what you buy input stereo/Stereo out x 2 and not a string splitter - stereo stereo / mono mono right and left!
  See you soon,.
  Jerry

• With the help of Club running on the Nike watch +.

  Hello

  This is something I have tried to work for a while and have not yet been able to find an answer. At the moment I use Nike + management club on my iPhone to follow the tracks that I find that gps is better than just using the application of the workout on my watch. However, something that really bothers me is that I start the race on my phone, but I can't then view my stats while running without having to press on and tap the watch and wait for the application to load, very irritating to race. I want to be able to lift my wrist and live stats are there to watch me, not listening and not get my phone out of my pocket. Surely this is something that can make the original watch?

  As a separate issue with the new app, Nike +, it does not recognize the songs I downloaded on my phone of Apple music in my playlists, then I have to play the separatelay of music through the application of music as opposed to go with Nike +? The ides on how to fix or is this a known problem with the latest Nike + app?

  Hello

  You may find it useful to consult the support resources of Nike and/or contact Nike for assistance with the help of their application:

  • Contact Nike (support is available by phone and via social media):
    • https://support-en-us.nikeplus.com/app/contact/l/4/t/4462/
  • Nike + running Club to support:
    • http://nikeplus.com/support/

  More information:

  https://iTunes.Apple.com/us/app/Nike+-run-Club/id387771637?Mt=8

• With the help of old gear series noon on El Capitan

  I have a Vox Tonelab SE effects audio Board (around 2004), there the old serial midi on the back ports. I hung with the help of a USB MIDI interface cable. While the USB Midi interface to the show in Audio / Midi set upward and also in the profile system for USB port it does not detect the Vox Tonelab so no communication lunch.

  There is a POWERPC application called ToneLabSE SoundEditor which I downloaded and installed in the hope he would install a driver but I guess that this obviously doesn't work on INTEL in any case. Using Wine I can run the PC version, but still no communication via midi.

  Someone at - it ideas, would like to get this Panel communicating effects via MIDI.

  Thank you

  

  

  

  Solved! Using the WINE app I've run the version of the PC of ToneLab SE editor application. So pretty unintuitively by changing the serial midi to USB, SERIAL interface cables that went to the and out on the Tonelab SE. Now of the Se ToneLab editor I can write banks of programs to hardware Tonelab, but unable to empty the banks since the material Tonelab to software. My main desire was to use Expression pedals on the Tonelab as Midi Ableton controllers and some of the switches to the control of the Looper stomp. Now I can do it all. Hooray!

• NEW Prob with the creation of Itunes folder

  With the help of wind 7. Sorry if I post in the wrong place... first post

  I use Itunes 10.  I tried to update recvd ' message cannot get server '.» I will update later, or can someone tell me the answer to this problem?

  My main problem is I moved my library in another drive.  Lost all my playlist, etc. (always have the files).  Tried many variations of repair by trying some other .itl file and .xml files. Now finally decided to REBUILD (have all music, etc.).  My BIG problem is that I can't start AGAIN.  I try and deleted all the folders to Itune.  Trying to FIX this prob. I created a situation where when ITunes all my Itune for opening files pop up on my desk.  I made changes in the preferences (location changed Itune file) but Itunes still removes the files on my desktop...  ICAN can't stop it. I uninstalled Ver 10 (after trying to update) and always the same prob.

  Please PLEASE HELP... Sorry to say, I have worked with it for 3 days and I got frustrated and lost. Please help me get this new database has started, and I'll pick the prob of update as soon as POSSIBLE.

  Thank you

  iTunes data appearing on the desktop may be the result of incorrect permissions. For more information, see fix for iTunes for Windows security permissions . Take a look at make a library of portable split. If you want to create a new library, you need to press on and hold the SHIFT key as you launch iTunes, then use the option to create a library. If you still have the old .itl file I can help you fix the library if you put all the pieces together in the standard layout.

  TT2

• With the help of modulated signal pulse width (square wave) to control when a signal is enabled or disable

  With the help of modulated signal pulse width (square wave) to control when a signal is enabled or disable

  Hello all

  I am using a modulated signal to labview created pulse width (square wave) to control when a signal is activated or not.

  Here is my logic and a concrete example:
  (1) the wave source signal is continuous
  (2) use a PWM (square wave) created in labview to control when the signal is enabled or disabled
  (3) if the PWM (amplitude) signal is superior to 0 play signal PWM is not greater than 0 do not play signal.

  I use actually this to the sequence step / pulse several distinct magnetic coils using my audio card (which has several channels of audio output), I have a signal in labview played constantly.  As to compare it to the PWM (square wave) which controls whether or not the signal is played on each separate channel.  That way I can control which coil is on and offshore and in what order they are activated.

  I couldn't find an edge detection for a square wave created in labview, so I tried the limits, but it doesn't seem to work unless I change the phase manually and it only goes 1-1.  I'm just trying to compare the PWM (edges of the square wave) already created by labview / play a signal if the pulse is greater than 0 and it shuts off the signal, if she is less than 0.

  Should I do this another way

  TIA

  A waveform contains an array of values. You must check every value and respond accordingly:

  

• High power house with the MHC-GT4D Bluetooth Audio System.

  I'm in VietNam. I like

  High power house with the MHC-GT4D Bluetooth Audio System.

  How can I buy it?

  Pls help.

  Thank you.

  Hi NGUYENTUANHOA,

  Welcome to the community of Sony!

  For further assistance about your concern, please contact the representative offices of offices/Sony Sony nearest your place of residence in the Asia-Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to the proximity, they are in a better position to respond to your questions or concerns.

  Best regards
  -Mark

  If my post answered your question, please mark it as "accept as a Solution.

• My AirPort Extreme end not implemented with the help of AirPort Utility

  Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.

  When I try to set up as a Wireless extender...

  Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?

  .. .it will not accomplish the synchronization upward with AirPort Utility.

  Which version of AirPort Utility?  If it's on your Mac... and you don't know what version you have...

  Open AirPort Utility

  Click the AirPort Utility menu in the upper left corner of the screen

  Click on about AirPort Utility

  Report on the version number you see here

  You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?

• With the help of iPhone 6 s. try to copy the text message with a tap double and get a bubble with icons. How can I copy the message to paste in another?

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  maryml wrote:

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  Press and hold on the text and wait for the copy/more pop up.