With the help of MAX vs Teststand for switching
Can someone explain what is happening here?
I went to MAX and gave all my or alias switches (MUX). This is the tab of channels/exclusions. According to the diagrams tab is a road named column groups. I can give my Relay connection (as close to relay 2) alias here... like 'Close Relay 2 '. If I click on relay 2 on the diagram, it shows a link between ch2 and com. Fine. Now when I go in Teststand > tab properties > switch > activate the change... I have the 'operation' 'Connect' Is - this redundant? I already connected when I called him. If its Teststand because does not know what I want, when I call this particular alias he "cut" when I select disconnect from the drop down?
You would say I leave ALL my relay open in MAX and just 'Connect' 'disconnect' in Teststand?
Can you suggest what should be the other options though:
I want to connect 1 or several relay for this sequence, do tests, then disconect the relays? -What connection Liftetime? So 'Step '?
What is multimode and when and how to use it?
Included some screenshots
Thank you!
Clint
Hey Clint,.
NEITHER Switch Executive exists in MAX and TestStand (and LabVIEW, etc.). You can program individual routes to TestStand, or you can beforehand create complex route groups to the MAX, and then call the road/route groups TestStand. Suppose for example that you want to connect A to B, C, D, E and F, you can create a great course called 'channels' band in MAX, then add explicit connections to this group of ranges (from A to B, C, D, E and F). You simply connect 'great channels' now in TestStand and NI Switch Executive will do the rest.
While you can connect channels in MAX, the intention is that you create route groups in MAX and then use these groups of road to the test (if for no other reason than TestStand is automated so that MAX is not). At the end of the day, you can use the SW but you wish to, but we intend to the run-time execution to automate in teststand. Think that MAX is the debug/configuration environment.
Connection Lifetime is how long the relays must stay in touch. For example, inflicting on life 'Step' means that, after this step TestStand is completed, the relay will be disconnected.
Desktop mode is the concept that a relay can be connected more than once in the software. Until the connection number is 0, the relay is open. If the number of relays is greater than 0, then the relay is closed. For example, suppose that you have two different tests that can run simultaneously, and they share the same relay. Specifically, 1 tuberculin relay A and B, while the tuberculin 2 relay B and C. If you are able to run both events at the same time (function of your DUT), then when you connect test 1 and 2 at the same time, relay A and C will be all both have a connection of 1 account (they were connected once), but the relay B will be 2 connections. Thus, when testing 2 finishes and disconnects its associated relay, test 1 could still be running; Since the relay B will have a connection of 1 account after test 2 'disconnects' relay B, relay B will always be closed and 1 test will not be interrupted. The concept takes a minute to wrap your head around, but finally it is quite powerful.
OR Switch Executive is a very powerful program. Once you've played a little with it for a bit, it is intuitively easy, but there is a curve of rampup higher compared to our other software program switch (OR-DAQmx, OR-Switch, etc.). OR Switch Executive is particularly well suited for TestStand.
Let us know if you have any other questions or if my answers are not clear. Have a great day!
Tags: NI Products
Similar Questions
-
With the help of Max for alphanumeric values
Currently I have a column varchar2 with the following data
Try to find a way to remove all the letters and get the next highest value increase.NPT_Code NPT00001 NPT00112 NPT03019A NPT00419
Numbers are always set to 5. Letters from there always 3 to the left. and sometimes, there is a letter to the right.
I was going to mak a sequence and manually to the search for the greatest number in this column and just start from there, but I was wondering if anyone else knows another solution that uses max or something simliar.
Select Max(NPT_Code) + 1 into l_NPT_CODE FROM TABLE UPDATE TABLE SET NPT_CODE = L_NPT_CODE WHERE ID = XXXX;
Hello
Here's one way:
SELECT TO_NUMBER ( REGEXP_SUBSTR ( string_column , '[[:digit:]]+' ) ) AS number_value FROM table_x ;
number_value will be the number 3019 if string column is one of the following strings:
NPT03019A
NPT03019
T03019
03019NPT
NPT3019A
NPT0000003019A
03019
3019You can then use number_value functions such a MAX.
I hope that answers your question.
If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.
Explain, using specific examples, how you get these results from these data.
Always tell what version of Oracle you are using.
See the FAQ forum {message identifier: = 9360002} -
I use first elements 12-day.
I'm editing iPhone 5 video shot with the following specifications:
Type: MPEG Movie (.) MOV file extension)
File size: no more than not not 300 MB
Image size: 1920 x 1080
Frame rate: 30.00
Audio Format: 44100 Hz - compressed - Mono
Project Audio Format: 44100 Hz - 32 bit floating point - Mono
Total duration: no more than not not 3 minutes
Pixel format: 1.0
Project settings:
General:
Editing mode: DSLR
Time Base: 30.00 FPS
-Video
Image size: 1920 1080 horiz Green
Format of the pixels: Pixels square (1.0)
Fields: No fields (progressive scan)
Display format: 30 fps timecode
-Audio
Sample rate: 48000 Hz
Display format: Audio samples
Capture:
Capture format: DV
Video rendering:
-Previews
File format: I-Frame only MPEG
Compressor: MPEG I-Frame
checked = optimize stills
If I publish on the desktop and select AVCHD
choose: MP4 - H264 1920 x 1080 p 30
File type: H.264
Image size: 1920 x 1080
Frequency [fps] of image: 29.97
Audio: AAC, 160 kbps, 48 kHz, stereo
File size: 1531,05 MB
Duration: 6 Min 30,00 s
The video is choppy, whenever there is a moderate movement.
During the first reading, it is perfectly smooth.
All I want to do is be able to share this video on youtube, Facebook and watch it again on my computer of relatively high quality, but I'm willing to make compromises in order to get everyone to play smoothly.
1st quarter) what should I be out this about accomplish what I just said?
Q2) video must be only like 3 minutes after that installation but there seem to be 3 minutes of black screen at the end. How can I get rid of this black bit at the end?
cwsteini
Unless you have the information in front of you, please download and install the video properties MediaInfo reading program to determine the frequency of images or your video frame rates. Cell phone video is often characterized in variable rate which can (not always) create problems to get imported, video audio out of sync...
MediaInfo - download reviews and free software - CNET Download.com
Be on guard for any unwanted alongs carry with the MediaInfo. Excellent program, but those carry alongs can be a major nuisance. The reading of this program will tell constant compared to variable rate.
Also check the display to confirm that you are working with progressive video and not interlaced.
If variable rate, the next step would be to take video in brake hand and export it as H.264.mp4 with a rate constant, not variable. Use the median between the min and max.
We will follow to your results.
Thank you.
RTA
-
With the help of Extraputty 2014 TestStand
Curious to know if Extraputty is supported by TestStand2014. I installed Putty and the steps of teststand during the installation process. However, when you attempt to insert a step I do not get an option to extraputty as shown in the link below.
http://www.extraputty.com/features/TestStand.html
What is needed in order to start an SSH connection?
J Meye,
This is Ali from the National Instrument of engineering applications. Have you had a chance to look at these messages to the forum below? They are also Extraputty configuration to connect with TestStand 2012. Since there was not too much of a change of each software, did you have any success with following these steps?
ExtraPutty TestStand 2012 questions:
http://forums.NI.com/T5/NI-TestStand/starting-TestStand-with-ExtraPuTTY-installed/m-p/2596877#M43310
http://forums.NI.com/T5/NI-TestStand/starting-TestStand-with-ExtraPuTTY-installed/m-p/2596877
Review of SSH Communication:
http://digital.NI.com/public.nsf/allkb/A254FE727B22258586257B6E002DF401?OpenDocument
Problems with 64-bit:
http://forums.NI.com/T5/NI-TestStand/SSH-and-64-bit-TestStand/m-p/2961873#M46440
In addition, it is a 32-bit system? There was configuration problems with 65-bit with Extraputty systems.
-
With the help of MAX to configure digital input levels on a USB-6009
Hello
I use a USB-6009 box in a Windows environment. MAX allows me to configure the 8 bits in the port 0 as inputs or outputs. However, when I put the bits for all entries, their default level is high, and the "ALL LOW" button is grayed out. Is there a way I can turn this button to set the bits all low entry and therefore be configured to read a + 5V input pulse?
Concerning
Geoff Hammond
When you set up the pins as inputs, you can read 0 or 5 volts. It makes no sense to set then high or low. No PIN disconnected feel of course a logic 1 because of pull-ups on the device.
-
With the help of two different devices for VDR to save the same virtual machines
Hello
I have VDR backup right now most of my virtual machines. I'm experimenting with some recovery scenarios disaster using VDR. I want to set up a new device, backup virtual machines themselves, but with a destination off. My question is, it would cause problems to have two different devices, backup the same virtual machines?
I'm asking this is because I was looking at the notes of recent VMworld session on VDR and he says, regarding a troubleshooting scenario in which you must create a new device in addition to your current device, both devices back up the same virtual machines do not.
If it is dangerous to do so because of the likelihood that two devices can save the same virtual machines at the same time, I could schedule the backup windows at different times to avoid this problem.
Anyone have any ideas?
I create a second local camera vDR and vDR distance and test it against a test VM. The vDR devices will have their own CBT files for each virtual computer, so they should be able to work together, but I would like to go through tests to see how they work well on the WAN. Make sure that you can transfer enough data to host daily data change.
-
With the help of Adobe Application Manager for updating desktop applications?
Hello
I don't know if it's possible, but I can update desktop applications that I installed via Adobe Application Manager?
What I see is a list of the programs on the right and "Installed" or "install". Nowhere can I see a list of the updates available or applied.
However there are updates available, for example, I'm on Lightroom 4.1 and when I start it up it tell me that there is an update available. However following the link just takes me to an external Installer to download and run. Is there a method unified view/apply updates in the Adobe Application Manager? I've updated the MAO a day or two there as well so I'm sure I'm on the latest version.
I use Creative Cloud (CS6) on a 64-bit Windows 7 computer.
Thank you
Tobias
Tobias Adobe Application Manager automatically detects updates for most of the Adobe Applications. In general, if you can ensure you have the latest version by going to help > updates in the application you are eager to update. For example, Photoshop Lightroom uses a mechanism separate from the Adobe Application Manager Update.
-
With the help of videos quick time (for the web)
Hi guys,.
In my project, I use quick time videos in director, which work very well at its publishing and reading in the projector. However when I export for the web, video replay in the web browser. Is there something I'm missing when exporting?
Thank you very much
RichYour QT files are too large. The Member is set to listen to? You can
monitor percentStreamed (place a #field on the screen and update each)
frame with member("QT").percentStreamed) -
With the help of connections to database for the safety of the ADF
Hi all
I have a request of 11g ADF (11.1.1.2.0) that uses the security of ADF and authenticate via LDAP against an Oracle Internet Directory. Now, we have an obligation to authenticate Oracle database users and remove the need to use the OID. Is it possible to do this in WebLogic?
I know that if I maintain my own tables with user name and password in the form of columns, I use a SQLAuthenticator as described here:
http://Biemond.blogspot.com/2008/12/using-database-tables-as-authentication.html
But in my case I don't have my own table 'users', I actually want to use RDBMS users (just like Oracle Forms only). Has anyone written an authenticator class that can do this?
See you soonHello
Oracle Forms keeps a user login to the database schema - so it performs no authentication. If you want the personal connection, then security ADF isn't the riht place to look for that but referrals under ADF BC dynamic JDBC
To perform authentication against the schema of a database without connecting to the application to it (only for authentication pupose), you will need to write a provider of custom authentication (a JAAS login Module) for WLS wrapped. Then, this can be configured using the WLS console and authenticate the user session. This can then be used to authenticate the security of the ADF. See the documentation for WLS for how to write custom authentication providers
Frank
-
With the help of Adobe Acrobat 4 for post-processing under Win 8 compression
I have created pdf files and scanned documents.
I wonder if I can install using Acrobat 4 under Win 8 64 bits to compress my course PDF files (assuming that it's the only thing I do with Acrobat 4.0)?
I can't afford the new Adobe Acrobat X Pro at this time.
It is not compatible and that which settles.
Mylenium
-
With the help of an external file for the main content
Hello
I wish that the content key to a file (most likely a Word) that can be created in word and then placed in the main content of the home page. Then when my client modifies the Word document it can replace it by it FTP'ing in a folder of documents on the hosted server.
In the end, I would have preferred that it connect to the Web site hosted, connect you to the space where it wants to make changes, and then save. (I'll ask another thread)
Thank you
Steve
Hi Steve,.
I remember this thread: http://forums.adobe.com/message/3049247#3049247 with this trick:
Re: Connect to the remote server and edit content on a web page
You can also try some of the free solutions out there likeHans G.
-
With the help of Micro SD cards for videos
I was just wondering on the SD card in my sansa fuze. If I put videos in my SD card and put the card in the "rocket", would that work? Or that I still have to first convert it and place it in the SD card.
cnpark wrote:
I was just wondering on the SD card in my sansa fuze. If I put videos in my SD card and put the card in the "rocket", would that work? Or that I still have to first convert it and place it in the SD card.You must first convert your videos into a format that the "rocket" is able to play, regardless of the place of storage. You can achieve this by Sansa Media Converter or other tools developed by some of us (see my tutorialor video4fuze ).
-
Need help with the help of an xml file for changes in the system profile
I'm looking to accelerate the deployment of new rack-mounted servers by updating their server through xml import profile information and I'm stuck.
I am able to successfully export the profile as an XML to NFS.
I'm not having luck changing data to import.
My first attempt great base is simply by changing the name of drac.
Here are the contents of the xml file that I am trying to import:
ADMIN NOTE: Service tag removed per privacy policy>" timestamp="Mon Feb 15 12:50:44 2016">");" > laboratories-001-dev-a01 - dc1.example .net The job fails.Any ideas on what I am doing wrong?
Hi Martin,
I found my problem.
In the GUI, you can enter a COMPLETE domain like something.example.com name in DNS Rac name field.
Who will fail via importing a racadm as apparently a. is not allowed during the updating of the attribute "NIC.1 #DNSRacName".
Is this a bug of the DRAC?
-
With the help of a wild card for any date
I would like to have a contact to enter a campaign, once one of the fields from the custom contact form has ANY date in it, not only a date specific. Is this possible?
You can also try the Null not exactly and see if it works.
-
With the help of VISA Write in parallel loops (multithreading)
Hello
I got the idea to set up four parallel loops on a quad core with four EHR via serial port independently. I use the PXI-8430/8 and I was told that an independent operation of ports is possible.
What I did was simply to put in place four parallel for loops consisting only of a single entry VISA. With the help of the Tools > profile > find parallelizable loops, they gave me the following warning
This loop For may or may not be safe to parallelize. Warning (s):
-A node in the loop For can have side effects.This means, that the pilot VISA screws are not suitable for multithreading? With the help of LV2010
Thanks for your comments!
See you soon
Oli
Here's some good reading on paralleled for loops.
Regarding the caveat, it's just that - a warning. If you write commands on a device and orders must be received in the order then you cannot parallelize the loop. If the order does not matter then go ahead. But in the case of VISA wrote that a parallelized loop going not buy you anything. They are intended for operations of calculation intnesive.
Just stick to four loops.
Maybe you are looking for
-
Why my iPhone 6 finds it difficult to connect to the WiFi?
Hello Phone: iPhone 6 Software: iOS 9.3.2 I bought my iPhone 6 last year and never had a problem with it until recently. Suddenly, he's got many hardly showing with available networks to connect to. I can connect perfectly with the right password (th
-
A clean install of windows 8.1
Hello!Give me please a complete list of required software for a clean install of Windows 8.1 on the dv7 Hp ENVY 7355er?On the portable computer page is not given the full list of software.
-
OfficeJet J4580: Trouble getting EXCEL to print files
My HP Officejet J4580 all-in-one (currently logged on a HP Pavilion dv9000 notebook) prints more EXCEL files. So I tried to fix the problem by reinstalling the software drivers from the CD initially supplied with the printer. Download the latest vers
-
piracy of all of the email addresses entered my Yahoo immediately when the message is received by me
I tested my yahoo email to see thet kind of hacking I feel. Each incpoming email I receive is immediately sent a spam with the automatic response of subject from my e-mail address. I changed my password, lost password parameters be only for my cell a
-
Unable to sign in to windows live id - it goes to the page "to provide account information.
Original title: can't connect to windows live id after reset and it goes to this page of account information and I do like ask and then it goes to a page saying cannot save my info please identify yourself Provide account information Before you can c