With the help of the IBM MSM Megaraid Storage Manager

Similar Questions

• LSI MegaRAID Storage Manager on VMware ESXi 4.0

  Hi guys,.

  We tried to install on VMware ESXi 4.0 MegaRAID Storage Manager (IBM x 3550 M2) and it uses Controller RAID MegaRAID SAS 8808E to monitor the hard disk status but could not be able to install and it returned the error as attaché

  We followed the procedure as shown in the following ibm Web site

  1.6 MegaRAID Manager storage system to a VMWare ESX Server

  Follow these steps to install the on a MegaRAID Storage Manager

  VMWare ESX Server:

  1. download the latest MSM to ibm.com

  2 unzip the and copy MSM_linux_installer - 501.01.tar.gz on a USB key.

  3. from the ESX Server, in the console root, type the following command

  to identify the USB device: fdisk-l

  4. type the following command: mount/mnt/dev / {name of the USB device}

  5. type the following command: cd/mnt

  6. type the following command to copy MSM_linux_installer - 501.01.tar.gz in the occupied Palestinian territories

  file: cp MSM_linux_installer - 501.01.tar.gz / opt

  7. type the following command to decompress the package gunzip MSM_linux_installer - 501.01.tar.gz

  8 type the following command to unzip the package tar - vxf MSM_linux_installer - 501.01.tar

  9. replace the directories with the path/opt/disk

  10 tapez./vmware_install.sh to install MSM

  11. Select version of VMware

  a. enter 1 to install Vmware 3.5

  b enter 2 for VMware 4.0 install

  12. Select the storlib option

  a. Enter n If you want to use the Inbox storlib driver

  b. Enter y if you want to install the storlib delivered with MSM

  IBM recommends 'y' is selected for use packed with MSM, storlib by selecting "n" can

  cause some features of MSM does not function properly

  I would like to know if I use the correct version of the Storage Manager Application MegaRAID for VMware ESXi 4.0

  
  

  If not could someone please advise on how to proceed with the installation and troubleshooting

  Please find the file of errors as attaché

  
  

  Greatly appreciate your help

  
  

  Thanks in advance,

  Vignesh
  

  Check if help: vSphere unknown health status ' vSphere ' eMware »»

• VMWare vRealize is compatible with the IBM SVC?

  VMWare vRealize is compatible with the IBM SVC?

  Given that you posted the question on the forum of vRealize Orchestrator, I think that your needs is to orchestrate/automate the tasks of storage... in any case, now that you told me you want to monitor the performance of your SVC, the VMware product that allow you to monitor the performance and health of the storage devices is the vRealize, Operations Manager , along the coast with the Pack of Directors for storage devices, BUT unfortunately the SVC is not supported by the provided by IBM management pack, have a look here: https://www-01.ibm.com/support/knowledgecenter/STWMS9_2.2.1/RN/isis_rn_supported_storage.html

  Only XIV and accelerate the spectrum is supported at the time... in any case I would recommend you use the control of the spectrum of IBM (formerly IBM Tivoli Storage Productivity Center).

• ESX 4.1 and LSI Megaraid Storage Manager

  Hi all!

  I'm testing a move of VMWare vCenter server for my organization and I am running into a problem.

  In my test environment, I have a Supermicro H8DME-2 motherboard with a Raid SAS LSI 9261 - 8i on that controller.  I currently have 2x750GB Sata in Raid 1 drives configured on the LSI controller.

  VSphere health now, reports that everything is perfect, especially when I pull on one of the hard drives.

  My problem is my ability to rebuild the table if I replace a drive.  I do not see this feature within vSphere (and I am not advanced to vCenter again, although I intend to do).  I was hoping to get LSI MSM installed, but I get an error.

  I installed MSM 8.00 - 05 website of LSI and used the vmware installation script.  I opened the ports required in the firewall of ESX.  I loaded the MSM client on either a guest on the ESX host or on my own machine and I am able to login and connect to the server.

  Loads of everything and I have just enough time to just a few clicks (about 20 seconds) until I lose the connection to the server.  After that, I can't reconnect unless I go to the server console and the show

  /etc/init.d/vivaldiframeworkd restart

  .  Then I can connect again, but only for 20 seconds.

  For this reason, I can't manage my server, for example a range of gradients or the configuration of a new table, without having to reboot the host, which is an unacceptable solution.

  If I have a ssh connection open to the server when the frame falls down, I get a few terminals output.  It is:

  # * glibc detected *... / JRE/bin/Java: double free or corruption (! prev): 0x081d2d40 *.

  = Backtrace: =.

  [/ lib/libc.so.6[0x8cd121]

  (/ lib/libc.so.6(cfree+0X90) [0x8d0bf0]

  [/ usr/local/MegaRAID Manager/jre/lib/i386/client/libjvm.so[0x623f009 storage]

  (/ usr/local/MegaRAID Storage Manager/Framework/libstorelibjni.so(_ZN7JNIEnv_24ReleaseByteArrayElementsEP11_jbyteArrayPai+0x1f) [0xed4f26e7]

  (/ usr/local/MegaRAID Storage Manager/Framework/libstorelibjni.so(Java_plugins_StorelibPlugin_processNativeCommand+0x1cb) [0xed4f1d59]

  [/ usr/local/MegaRAID Manager/jre/lib/i386/client/libjvm.so[0x621b25d storage]

  [/ usr/local/MegaRAID Manager/jre/lib/i386/client/libjvm.so[0x630f998 storage]

  [/ usr/local/MegaRAID Manager/jre/lib/i386/client/libjvm.so[0x621ab70 storage]

  [/ usr/local/MegaRAID Manager/jre/lib/i386/client/libjvm.so[0x621abfd storage]

  [/ usr/local/MegaRAID Manager/jre/lib/i386/client/libjvm.so[0x628b265 storage]

  [/ usr/local/MegaRAID Manager/jre/lib/i386/client/libjvm.so[0x63a03dd storage]

  [/ usr/local/MegaRAID Manager/jre/lib/i386/client/libjvm.so[0x6310ac9 storage]

  [/ lib/libpthread.so.0[0x9b549b]

  (/ lib/libc.so.6(clone+0x5E) [0x93533e]

  = Memory map: =.

  00846000-00860000 r - xp 00000000 08:15 /lib/ld-2.5.so 196046

  00860000-00861000 r - xp 00019000 08:15 /lib/ld-2.5.so 196046

  00861000-00862000 rwxp 0001 has 000 08:15 /lib/ld-2.5.so 196046

  00864000-009 a 2000 r - xp 00000000 08:15 /lib/libc-2.5.so 196047

  009a 2000-009 has 4000 r - xp 0013e000 08:15 /lib/libc-2.5.so 196047

  009a 4000-009a 5000 rwxp 00140000 08:15 /lib/libc-2.5.so 196047

  009a 5000-009a 8000 rwxp 009a5000 00:00 0

  009aa000-009ac000 r - xp 00000000 08:15 /lib/libdl-2.5.so 196048

  009ac000-009ad000 r - xp 00001000 08:15 /lib/libdl-2.5.so 196048

  009ad000-009ae000 rwxp 00002000 08:15 /lib/libdl-2.5.so 196048

  b 009, 0000-3000 009c r - xp 00000000 08:15 /lib/libpthread-2.5.so 196051

  009c 3000 009c 4000 r - xp 00012000 08:15 /lib/libpthread-2.5.so 196051

  009c 4000-5000 00013000 rwxp 009c 08:15 /lib/libpthread-2.5.so 196051

  5000-009c rwxp 7000 c 009 009c 5000 00:00 0

  009dd000 - 00a 02000 r - xp 00000000 08:15 /lib/libm-2.5.so 194744

  00a 02000-00a 03000 r - xp 00024000 08:15 /lib/libm-2.5.so 194744

  00a 03000-00a 04000 rwxp 00025000 08:15 /lib/libm-2.5.so 194744

  00 has 06000-00a0f000 r - xp 00000000 08:15 /lib/libcrypt-2.5.so 194796

  00a0f000 - 00a 10000 r - xp 00008000 08:15 /lib/libcrypt-2.5.so 194796

  00a 10000-00a 11000 rwxp 00009000 08:15 /lib/libcrypt-2.5.so 194796

  00a 11000-00a 38000 rwxp 00a11000 00:00 0

  00b 19000 - 00bf4000 r - xp 00000000 08:15 /usr/lib/vmware/lib/libstdc++.so.6 830095

  00bf4000-00bf8000 r - xp 08:15 /usr/lib/vmware/lib/libstdc++.so.6 830095 000da000

  00bf8000-00bf9000 rwxp 000de000 08:15 /usr/lib/vmware/lib/libstdc++.so.6 830095

  00bf9000-00bff000 rwxp 00bf9000 00:00 0

  00C 55000 - 68000-00C r - xp 00000000 08:15 /lib/libnsl-2.5.so 196064

  00C 68000 - 69000-00C r - xp 00012000 08:15 /lib/libnsl-2.5.so 196064

  00C 69000-00c6a000 rwxp 00013000 08:15 /lib/libnsl-2.5.so 196064

  00c6a000-00c6c000 rwxp 00c6a000 00:00 0

  00cab000-00cb2000 r - xp 00000000 08:15 /lib/librt-2.5.so 196057

  00cb2000-00cb3000 r - xp 00006000 08:15 /lib/librt-2.5.so 196057

  00cb3000-00cb4000 rwxp 00007000 08:15 /lib/librt-2.5.so 196057

  06000000 a-0642, 000 r - xp 00000000 08:15 941214/usr/local/MegaRAID Storage Manager/jre/lib/i386/client/libjvm.so

  0642 a 000-06444000 rwxp 0042a000 08:15 941214/usr/local/MegaRAID Storage Manager/jre/lib/i386/client/libjvm.so

  06444000-06864000 rwxp 06444000 00:00 0

  08048000-08052000 r - xp 00000000 08:15 / usr/local / MegaRAID Storage Manager/jre/bin/java 941045

  08052000-08053000 rwxp 00009000 08:15 / usr/local / MegaRAID Storage Manager/jre/bin/java 941045

  080ef000-08350000 rwxp 080ef000 00:00 0

  ebc83000-ebc84000 - p ebc83000 00:00 0

  ebc84000-ec684000 rwxp ebc84000 00:00 0

  ec684000-ec685000 - p ec684000 00:00 0

  ec685000-ed085000 rwxp ec685000 00:00 0

  ed085000-ed094000 r - xp 00000000 08:15 /lib/libresolv-2.5.so 196062

  ed094000-ed095000 r - xp 08:15 /lib/libresolv-2.5.so 196062 0000e000

  ed095000-ed096000 rwxp 0000f000 08:15 /lib/libresolv-2.5.so 196062

  ed096000-ed098000 rwxp ed096000 00:00 0

  ed098000-ed09c000 r - xp 00000000 08:15 /lib/libnss_dns-2.5.so 194726

  ed09c000-ed09d000 r - xp 00003000 08:15 194726

  A google search revealed by train

  export MALLOC_CHECK_=0

  but that has not solved the problem.

  Can someone point me to a solution?  I can't imagine that it is a new show, while everyone else is doing when they need to rebuild a table?

  Thank you!

  CIM LSI modules should be in the standard installation of ESXi. They will give you basic followed the vSphere client. Reconstruction of the tables would not be a part of that. I go back to ESXi 4.0 and try everything that is available for LSI specifically for ESXi. If the controller supports relief, you can simply add another drive.

  I don't know what can be available with the controller of the motherboard Supermicro (IPMI) but you can check this.

• Windows 7 will not be printed with the photo viewer and Picture Manager.

  Everytime I open an image file with Windows or Office Picture Manager Photo Viewer and try to print, I get 4 message boxes that said "your photos cannot be printed because this error occurred.

  There is nothing else that a button OK - not even one error code.

  The strange this is I can print almost anything with any other program very well. Firefox, Photoshop, all those print without problem. It's only the viewer Photo and Picture Manager that do this.

  The printer is an Epson RX595 with 64-bit drivers.

  My Office Picture Manager calls a dialog box that has a dropbox to define the printer. If you create an image of a document (*.mdi) you know it's the printer driver that has a problem.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Pavilion p6130y with the M2N7B - LA - no storage found-tried new drive in different sata-same result Pegatron

  Hello. Pavilion p6130y with Pegatron M2N7B - LA, Vista Home Premium 64 bit, Seagate Barracuda 7200.12 750 GB. Has stopped not working, with errors, none found in storage. Cable sata switched to other ports-same results. Bought the new Seagate hard drive and tested with new cables and ports with the same results. Taken to the technicians at best buy have tested and said it was the motherboard and not the hard drive. I don't know how they determined it was the motherboard - guy looked at the jury and said Oh yes I see it now... etc. Is it possible that I can say that it is the motherboard? I know enough to be dangerous ) with the material. Told us that a new motherboard is about $600. -better to get a new computer. The computer is around the age of 29 months. Is there a fuse that could be replaced if found reason for blowing possible in the first place? Seems too early for a bad mother for me. Thanks for any help.

  Ah Ah! Your motherboard is the origin of the problem, not hard drives. If the system is out of warranty, chances are you would, but I always call and let them know you have a problem with the map of M2N7B - violet.

• Import/export with the exception of security deployment manager

  Hello

  I'm getting following error, while trying to open the link export in Deployment Manager. (Browser: Firefox/IE/Chrome)

  Missing required permissions appear in the main container:

  http://Server1.com:14000/xlWebApp/ClientClassServlet/xlWebApp/detect.jar

  I also tried this link but no help. Any help.

  Unable to access the deployment (OIM11gr2ps1) Import/Export Manager

  Thank you.

  Find the java configuration and Security tab, click edit click and list of sites add button in pop.

  Add http://server1.com:14000/xlWebApp/ClientClassServlet/xlWebApp/detect.jar in it.

  Disconnect and reconnect in IOM and try again.

• Problem with the installation of Adobe Extension Manager 6.0.5

  I have an update for Adobe Extension Manager to update compared to the creative clouds to 6.0.5.  Every time I have try and install this update fails with the U44M1P7 error code.  When I look at the log files I get the exit code: 7 - could not complete the silent workflow.  I am under creative cloud CS6 on Windows 7

  to update manually: http://www.adobe.com/exchange/em_download/

• Send the report by email with the editor? and Task Manager...

  Hi, I have a big doubt, I try to send an E-mail with a report, first of all, I try to send with the editor, it comes to configurations of.
  
  Configuration of delivery
  
  ! http://LH3.ggpht.com/_V2lpPpulbm0/SLWM-4TLiJI/AAAAAAAACag/xZ5w57zkRnM/S800/bi%20Publisher.PNG!
  
  E-mail configuration
  
  ! http://lh5.ggpht.com/_V2lpPpulbm0/Slwm_PKsjVI/AAAAAAAACak/baCeaA9kV_s/S800/bi%20Publisher2.PNG!
  
  Send configuration parameters
  
  ! http://lh5.ggpht.com/_V2lpPpulbm0/SlwroVMXh4I/AAAAAAAACao/0-UaglX4N5Y/s512/configuracionparametros.PNG!
  
  
  But when I submit... I have an error: 'Deliver a STARTTLS comand first', * this * error means that Gmail server suporteront not?
  You know some Mail Company to Rrealize some tests.
  
  ! http://LH3.ggpht.com/_V2lpPpulbm0/SLWM-8g_LJI/AAAAAAAACac/1CeWNWZLL18/s640/errorpublisher.PNG!
  
  But... It is necessary to set up Job Manager? Why is it necessary to set up Task Manager, and Publisher is the same? or each of them is being used for something different, all forms, I post my Job Manager configuration too.
  
  ! http://LH4.ggpht.com/_V2lpPpulbm0/SLWM-X7idrI/AAAAAAAACaU/eq_N_Rloqjs/s576/SchedulerConfiguration.PNG!
  
  Thanks to all and sorry for the Spam Images(I think You comprehension better me)

   . i have an error: "Must issue a STARTTLS command first",this error means that Gmail Server not suporter?  
  

  Yes gmail will not support to send emails of this... because our accounts are free...

  Try with your credentials of the company e-mail, that it will work.

   It is neccesary configurate Job Manager? why is necessary configurate Publisher and Job manager, is the same? or Each one is in use for a different thing 
  

  BI Publisher will not use the e-mail manager job settings... If so, why we need configure the settings of mail in BIPublisher itself?

  Two things are different...

  Thank you
  Saichand.V

• LSI MegaRAID Storage Manager and Dell PERC cards?

  Hi all

  I have a Dell PERC 6 / i in my whitebox ESXi 4 server and I seem to be missing some options when connecting to it via the LSI MegaRAID 2.91 Storage Manager - 05. Basically, it seems the only operation I can do is take the disks offline. I have no option to create tables, add/remove disks in bays or change RAID levels.

  I can do all these things from the BIOS, this is obviously not the card. I had a glance the BIOS if it was something in TeleManagement prevents there but could not see anything, and I was wondering if these limitations due to a cut the officer of management in ESXi or something? If not, what could be causing the problem? When I log in MSM I use the account root on ESXi and MSM reports that I have full access.  As it is MSM is not very good for anything other than general information about my disks, card and backup battery.

  When I log in MSM I use the account root on ESXi and MSM reports that I have full access. As it is MSM is not very good for anything other than general information about my disks, card and backup battery.

  Have you installed the OEM ESXi version for Dell machines, or just a generic of VM Ware?  If you install ESX (with console) you can then install OM, and will give you the access you want.  You can manage all of this on the web.  Otherwise ESXi is limited, and it is a known issue.

  Have you tried to discuss with Dell?

• Display of the unavailable wattage with the last set of power manager?

  I recently installed the latest version (1.51 (a) the "Power Manager" software ThinkPad on my t400 and it seems now that the show "power when on battery ' display is no longer available? Am I just do not find the option to enable it, or has been deleted completely? The user interface for the power manager seems to have achieved a complete facelift with version so I'm afraid, that it was deleted :-(

  Step by step to version 1.47 software gives me the back of the option

  Well I am still convinced that the option to display the power on the battery meter has been removed from the user interface, but I found a way to fix

  My problem.

  It seems that the following registry controls what is displayed:

  [HKEY_CURRENT_USER\Software\IBM\PWRMGR\Data]
  'ShowRemainingTimeGauge' =: 00000002

  0 is used to display the "remaining percentage.

  1 should display 'time remaining '.

  2 should display 'power '.

  After you change the registry, you can restart or turn the gauge in the application of power manager

• Problems with the update of Adobe Application Manager to creative cloud

  I'm on a macbook pro, Snow Leopard 10.6.8
  I have a plan for photoshop CC and it works perfectly (I pay a monthly price for it and it is all ok).

  I'd really like the ability to use Creative Cloud sync, in order to have the same settings, when I switch from pc to mac (I use both extensively).

  At the moment I have Adobe Application Manager installed on my macbook pro.

  Adobe Application Manager is not up-to-date on its own.

  If I try to download creative cloud and install it, it opens Adobe Application Manager and stop there. Does not install creative cloud.

  I also tried to uninstall MAO, but it seems that I couldn't, so I used the Adobe cleaning tool and I eliminate AAM. Then I downloaded the installer of creative cloud again and I tried to install it, but it installed Adobe Application Manager instead!

  Help!

  Hi Lorenzo,.

  For Mac OS Snow leopard Desktop Application 10.6.8 creative Cloud is not compatible. It is compatible with Mac 10.7 and later.

  10.6.8 works with Adobe Application Manager only. This is the reason why, regardless of how many times you try to install creative cloud, it will install Adobe Application manager.

  See this link for help: requirements http://helpx.adobe.com/creative-cloud/system-requirements.html#System

  Thank you

  Ludo has

• Get surveys using filtered with the ID (space) data control manager surveys

  Hi all
  
  I need to get surveys using surveys Manager DataControl a space specific webcenter. I did not find any function under the control of data for surveys Manager for passing the scopeId as argument parameter.
  
  Is it possible to filter the polls based on the id of the scope?
  
  Can someone help me?
  
  Kind regards
  Suma

  According to the documentation.

  http://docs.Oracle.com/CD/E17904_01/WebCenter.1111/e10148/jpsdg_polls.htm#CIHIIJHG

  There is no scope ID to filter the polls based on spaces.

  But in any case, to achieve your desired goal, I would say that...

  Create surveys Mutiple (surveys) and on each Survey (Polls) you can have questions to take the poll.

  Thus,.

  Space 1-> 1-> Question 1 survey

  Space2-> eurobarometre2-> issue 1

  Space3-> poll3-> Question 1.

  All by posting the question you can use take survey taskflow or datacontrol where you will need to provide a SURVEY_ID in the pollId parameter.

  I hope that clarfiies your request.

  Kind regards
  Hoque

• Creation of nested with the Out-Of-Line storage option table

  Hi all
  
  I want to know the ability to adjust the table as out-of-line.
  
  Normal table creation is like this:

  CREATE TABLE BID_XML( BID_INSERT_STAMP DATE) ;
  
  ALTER TABLE BID_XML
  ADD( GLE XMLType) XMLType column GLE STORE AS OBJECT RELATIONAL
  XMLSCHEMA "http://www.schemas.th.com/IntBID03" ELEMENT "IntegrationBID"
  VARRAY GLE."XMLDATA"."Organization"."OfficerInformation"."Officer" STORE AS TABLE officers_tab;

  But we cannot access table officers_tab directly, so I want to define officers_tab as out-of-line? How can I do this?
  
  -Yasser

  Hi Yasser,

  Indeed, you can't do

  SELECT * FROM officers_tab;
  

  but you can question her via the SCOREBOARD operator:

  SELECT t.bid_insert_stamp,
         x.*
  FROM bid_xml t,
       TABLE(t.gle.xmldata."Organization"."OfficerInformation"."Officer") x;
  

  Isn't that enough?

• Problem with the H and V fieldmanager: S

  Hi to everyone! D

  IM new in this forum and I would like to ask one thing.

  I want to insert 3 BitmapFields on the screen, but with a particular organization, they must be placed as follows.

  I know I have to do it with the horizontal and vertical field Manager, but I don't know how > _

  If anyone can help me I will always be grateful with him

  http://www.freeimagehosting.NET/uploads/ae64a41495.jpg

  PD: below each image must be an aaaaaand RichtextField version are blackberry 8120 4.5.0 > _

  rboatright pretty well summed up my thoughts, but I would like to add:

  -Don't think you need the external V0

  -Center Images

  -layout on all labels (what I'd do RichTextField unfocusable), replace the value of width the width of the images

  -Center of all labels

  -Limit the width of V2 and V3 to Display.getWidth () / 2

  job done...