Windows Explorer Crash when using the control panel

This is the type of an interesting question that happens to me only sporadically and usually only to a cold start.

When I shut down the computer completely for cleaning or install something, when restarting, open the Control Panel causes Windows Explorer to crash (note that this is not Internet Explorer).

It restarts immediately, but I lost some of the icons in the taskbar - especially the icon Sound Max.

If I do a reboot it comes back and I can use the Control Panel normally. Tried to remove items from the start menu, as obviously something is in conflict when it starts but it is like shooting in the dark to find the good start. I even reinstalled W7 with a lot of attention, but it happens once again from time to time. I ran sfc/scannow several times and all is well.

As long as I don't do a cold reboot it will work very well for weeks without a hitch. (Please no comments about just don't).

Someone else has a similar problem? My specs are lower and it has not changed when I updated to the latest version of the bios so I suspect something on W7, and I strongly suspect the driver SoundMax which is in fact very old for W7X64.

All updates are underway, including the latest which was supposed to increase stability for W7 X 64. I had added this update 4/28. An accident 29/4 good. I uninstalled the update and re-installed directly from the microsoft link. Sometimes it works, but not in this case.

I studied all the information mentioned in the error codes and most of the time, it led to speculation of different people to different causes. I've read that it could be a conflict with the driver Sound Max, this is why I suspect as well that it might involve the Nvidia GPU driver. Changed the GPU driver and no joy. Whenever I have ask W7 to check a solution that is not found. So, it happens once in a while, but there is nothing wrong? At least Microsoft knows something is happening--evidence of the update.

ASUS P6T Deluxe V2 LGA 1366-Bios 1003 - Intel I7 920 - EVGA GF GTX 260 SC - 12 Gig Corsair DDR3 1333 Ram - Gig 2 300, Velociraptor, Raid 0 1 Seagate 500 Gig HD - Lite on DVD Burner - floppy drive and external-180 card-Coolermaster V8 Avermedia HDTV card reader - Thermaltake Toughpower 850 w. modular fan P.S. - Antec 1200 case - Reobus 6 - 5 controller 120 fan Thermaltake Fans - 1,200 cases GPU Driver 196,21 Windows 7 X 64

Hello

Make sure that Windows Update is turned on and install the update KB980408 (http://support.microsoft.com/kb/980408) - April 2010 stability and reliability update for Windows 7 and Windows Server 2008 R2 is available .

Issues that this update fixes this update improves the stability and reliability of Windows 7 and Windows Server 2008 R2 in various scenarios. This update addresses the following issues:

  • Windows Explorer crashes and then restarts when you access a third-party Control Panel item.

This update solves the problem?

If this isn't the case, please download this reg from my SkyDrive file:
http://CID-128fc518635be2dc.SkyDrive.live.com/self.aspx/.public/Ms%20Foren/registry/WER%5E_Explorer.reg

and double click on the file to import.

When Explorer crashes, Windows Error Reporting Service creates a dmp under C:\Localdumps . Please download the file to your public Skydrive folder and post the link here. I take to the dump, maybe I can see the cause.

André

"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

Tags: Windows

Similar Questions

  • Windows Explorer crashes when you open Control Panel

    After starting my PC of operation Win 7 Pro (64 bit) every time I try to open the control panel for the first time, Windows Explorer stops responding forcing me to restart Windows Explorer. Once Windows Explorer restarts then Control Panel opens normally after that no matter how many times I open the Panel. Any ideas how to fix?

    Often, a certain instability in Windows Explorer is due to the defective shell extensions and addons.
    Consider using Sysinternals Autoruns or ShellExView. Disable Add-ons and non Microsoft shell extensions and verify the behavior.  If he went, reactivate the disabled extensions/add-ons, one at a time and see if you can identify who may be liable.
    Try a clean boot, or boot into safe mode.  The behavior persists?
  • I get the error of Windows Explorer tries to use the Control Panel Applets

    Whenever I have open Control Panel, and then select an applet (Folder Options), I get an error for Windows Explorer and everything is frozen until I have completed the task with the Task Manager.  I am running XP Home Edition with Service Pack 3.  Have passed through each .cpl file by placing each of them, one at a time in a temporary folder and then try the control panel again.  I always have the error and cannot detect what applet file could be causing it.  Any help is appreciated.

    You must run a full on your antivirus scan, until the Trojan horse is completely removed.

    Try to access the folder in this way options:

    Start > my computer > in the top menu, click Tools > choose folder at the bottom of the menu options.

    Also run the eset online scanner on.

    Once the infection has been cleared, you should be able to go into folder options without freezing the pc.

    If you were able to enter the folder through the above method options and let us know if the Trojan horse has been completely deleted.

  • Windows Explorer crashes when you open any folder with MPEG2 files.

    WinXP SP3 - When you open any folder with MPEG2 files, windows Explorer crashes. If the folder contains only the MPEG1 files, it opens without a problem. We first thought it was a problem of media player, but we can not even click on a file to open it in media player.

    Hi kathyd,.

    ·        You did changes to the computer before this problem started?

    Since we do not know what is causing this problem, I'd suggest unanimous the event viewer on your computer and check the details in the window logs messages/error codes important related to the question, during the time where this problem occurs and after return.

    Event logs can help you identify and diagnose the source of current system problems or help you predict potential system problems.

    Access the link below to learn how to view and manage the event logs in Event Viewer in Windows XP

    http://support.Microsoft.com/kb/308427

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

    You can try to start both computers in safe mode and check if it can open the folder where the MPEG 2 files are stored and if windows Explorer crashes. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

    I hope this helps. Post back with the required information.

    Thank you and best regards,

     

    Srinivas R

    Microsoft technical support.

    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • "I can't uninstall" V9 uninstaller ' to my pc using the control panel uninstall installation

    "I can't uninstall" V9 uninstaller ' to my pc using the control panel uninstall facility. I know not how this program was originally installed, but I think that it is malicious. Help, please!

    Original title: impossible to uninstall a program

    Hello

    Please see the following for a good removal - http://malwaretips.com/blogs/safe-v9-virus/

    Kind regards

    Patrick

  • Windows Explorer crashes when I use my DVD player

    Installed on my new computer dvd player. BIOS has been registered, but Windows 7 has not been. Updated firmware to update, Windows 7 found and downloaded the drivers. I can see the drivers in Device Manager, but when I try to read from the drive windows Explorer crashes. Tried uninstalling the driver to reinstall dvd, but windows explored hangs.

    DVD player is:
    TSST corp CD/DVGW-SH-S182D

    Hello Elizabeth,.

    Are you facing this problem while trying to access some particular CD/DVD?
     
    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows
     
    Try the steps and check them off below if it helps:
    1. Click Start, type regedit in the search box, and then click regedit in the list programs.
     
    If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
    2. Locate and then click the following registry subkey:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
     
    Warning There may be many instances of the registry subkey that is mentioned in step 2. You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.
     
    3. in the right pane, click UpperFilters, and then click on remove.
    4. click on Yes to confirm the deletion of the UpperFilters registry entry.
    5. in the right pane, click LowerFilters, and then click on remove.
    6. click on Yes to confirm the deletion of the LowerFilters registry entry.
    7. exit the registry editor and then restart the computer.
     
    For more information, visit the links (these items can also be used in windows 7) below:
    http://support.Microsoft.com/kb/929461
    http://support.Microsoft.com/kb/939052

    You can also run the troubleshooter and check.

    1. click on the Start button and then click Control Panel.
    2. in the search box, type troubleshooting, and then click Troubleshooting. Click View all, and then click on play and buring CD, DVD and Blu - ray discs.
    3. follow the directions in the wizard.
     
    For more information http://windows.microsoft.com/en-us/windows7/products/features/windows-troubleshooting

    Hope this information is useful.
    Let me know if it worked.
     
    Thank you, and in what concerns:
    Umesh P - Microsoft Support

  • Windows Explorer crashes when the click with the right button on folders

    My Windows Explorer crashes whenever I right click on a folder, any folder.  It is for me a "Windows Explorer has stopped working" then it gives me a warning 'Windows restarts.  Then he closes my Explorer window.  I tried many things to see if that would help and nothing has done so far.  Anyone has any suggestions on how to solve this problem or knows what could be the problem?

    Click right problems are very often caused by third-party programs adding entries in the context menu.  Here is a program that can help you manage these inscriptions: http://www.nirsoft.net/utils/shexview.html.  Here, another article written for XP, but it applies to Vista that may be useful: http://windowsxp.mvps.org/context_folders.htm.

    I hope this helps.

    Good luck! Lorien - a - MCSE/MCSA/network + / A +.

  • Cannot activate windows, or use the control panel

    After searching the forum, I decided to post that I couldn't find something that relates to my question.  I've never had a problem like this before, nor have I heard of someone having a problem like this before.

    I had a problem where multiple items in Control Panel do not work.  First of all, I thought I might miss an update, but that didn't work either.  I remembered that I have been turned off of the windows activation.  When I go in Panel of-> system and click "you must activate today. Activate Windows now" nothing happens. Nothing at all.

    I first encountered this problem when I was trying to manage my firewall settings: Panel-> control panel all the elements-> Windows Firewall-> authorized programs.  

    Trying to allow a program through Windows Firewall. When I tried to click on "Allow another program" the same thing happened (absolutely nothing happened).  I followed this with trying to turn off my windows firewall completely, expecting the OS to get out the big warning saying that my computer is not protected please reactivate, etc..  I turned both outside the home and private and Public networks OFF and clicked on OK, and once again, nothing happened.

    I don't know how long this problem has affected my computer, because I did not need to change the settings of Windows for at least a couple of months.  Other things I tried to do that it does include:

    User accounts:

    Change your account name

    Change your account type

    Manage another account

    Thanks for the replies. I tried the suggestions the two first suggestions J W of Stuart, as well as a defragmentation. After these things, that I tried to run the repair installed and I couldn't do it, he could not see one of my old files. So I had to do a fresh install. Fortunately I did not lose a lot.  Thanks for the replies.

  • Windows Explorer crashes when you try to copy files (from dvd - rom on the hard drive)

    This is the error I get, copied from the technical details of UAC.

    I tried to create the new account and sfc/scannow
    sfc/scannow pointed out problems and errors, but is unable to repair.
    The Explorer.EXE version 6.1.7600.16450 program ceased to interact with Windows and was closed. To see if there is more information about the problem, check the history of the problem in the control panel of the center of the Action.
    Process ID: 98c
    Start time: 01ced605f3f95e5c
    Time of termination: 60000
    Application path: C:\Windows\Explorer.EXE
    Report ID:
    Is that the next step of repair window?
    Thanks in advance

    One of the recurring errors in Event Viewer was the 'Source' following 'KScsiPrt ':

    The description for event ID 9 source KScsiPrt is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.


    If the event is on another computer, the display information had to be saved with the event.


    The following information has been included in the event:


    \Device\Scsi\KScsiPrt1

    Which may indicate a problem with the SCSI KernSafe controller.

    Can you try disabling the controller SCSI KernSafe in Manager devices as suggested hereand see if that makes a difference.

    You may need to restart the computer after you disable the driver.

  • Windows Explorer crashes when you try to make the list of associated file types. Error: 0xc0000005

    This is the view in the general tab of the event viewer. Looks like a problem ole32.dll but I don't know what to do. I have Win 7.

    The failing application name: Explorer.EXE, version: 6.1.7600.16450, time stamp: 0x4aeba271

    The failed module name: ole32.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdac7

    Exception code: 0xc0000005

    Offset: 0x0002af88

    ID of the process failed: 0x1bfc

    Start time of application vulnerabilities: 0x01cafc16e3fb0780

    The failing application path: C:\Windows\Explorer.EXE

    The failed module path: C:\Windows\system32\ole32.dll

    Report ID: 605a0c40-680a-11df-b86a-001e90f0c8af

    Thank you

    Brian

    Often, a certain instability in Windows Explorer is due to the defective shell extensions and addons.
    Consider using Sysinternals Autoruns or ShellExView. Disable Add-ons and non Microsoft shell extensions and verify the behavior.  If he went, reactivate the disabled extensions/add-ons, one at a time and see if you can identify who may be liable.
    Try a clean boot, or boot into safe mode.  The behavior persists?
    If you continue to experience the problem, consider creating the hierarchy of following registry keys in the registry:
    HKLM\Software\Microsoft\Windows\Windows error Reporting\LocalDumps\explorer.exe\
    In the explorer.exe key, create a REG_EXPAND_SZ value named DumpFolder and set the value to%systemdrive%\localdumpsdata.  Ensure that the %systemdrive%\localdumps file exists, and then cause the crash to happen.  It must be a dump file in %systemdrive%\localdumps. Download the dump on your SkyDrivefile.
    (Letter is an environment variable that represents the system drive, usually C:.)
  • Windows Explorer crashes when you open folders that contain pictures.

    From this point, I'm exasperated!  Whenever I try to open a folder containing images, windows Explorer crashes.

    I did a thorough check of the spyware.  I jumped through hoops attempting to clean the cache thumb and no joy.

    When it first started happening, I thought it was too many files in a folder.  That does not seem to resolve things for a while, but the problem is back.

    There may be too much data in the folder or the display on the screen.  You have pictures instead of icons in these records?  Go to start / Control Panel / folder Options / view and check the box for display icons instead of thumbnails.  See if that solves the problem.

    If this isn't the case, create a single image and save the file.  Create a folder in Windows Explorer and save the file to this folder.  Try to open this file.  You have the same problem or does it work?  If this works, there may be something true in what you said about the size of the files.  If she has the same problem, then you must do some serious troubleshooting to try to find the cause and fix.

    I hope this helps. Keep me informed.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • How can I access my computer in order to remove downloaded files that has not deleted using the control panel and the usual functions to delete?

    I recently received from remote assistance installed a new anti-virus program. During using the remote technician, I he observed several open windows because it deleted the files that were left by previous anti-virus programs on my computer.  These files prevent the download of the new program.  As I watched him navigate through my programs and files, I noticed that there are a lot of game files that have been deleted by using the functions of the control panel and uninstalling still in my computer.  The technician of 3-4 programs installed on my computer while he removed residual files of the antivirus and promptly removed from these programs when it was correctly installed my new anti-virus program.  I would really like to know how to access files or records what he did and then delete the game files that I thought were removed.  I downloaded at least 100 trial offers for sets of objects hidden over the years and you don't want no trace with my memory of the computer.  No help available out there?

    Hey,.

    You can follow this link to recover lost or deleted files:

    http://Windows.Microsoft.com/en-us/Windows-Vista/recover-lost-or-deleted-files

    also, look for the file/game:

    http://Windows.Microsoft.com/en-us/Windows-Vista/save-your-search-results

    Hopefully this should help you.

  • Windows Explorer crashes constantly on the new Asus

    I bought a new X53SV-SX288V Asus with windows 7 64 bit on it and after installing some programs Windows Explorer crashes constantly for some reason any...

    I have restored the pc to factory a couple of times now, hoping it might fix the problem, but it is persistent...

    Windows Explorer crashes often and sometimes it seems that the problem has disappeared, but then it happens randomly. When I restart the Explorer usually just, it freezes again and gives me the same error permanently after each restart of Explorer... it just crashes, restarts, block immediately, restart and so on...

    I don't know what to do. I'm not much of a geek...

    The thing is, the problem occurs only after you have installed programs. Not directly after the time I restore settings, is probably not a hardware problem (I think).

    Still, I installed an antivirus before anything else.
    First of all, I tried Comodo several times. Then Avira. And now I'm with AVG. Thus, all the programs I download should be good.

    Side note: programs Evernote who install are all widely used programs like CCleaner, Skype, iTunes, Chrome,... All of their own websites, so I do not understand how they are the problem.

    Is it possible that this is a problem material, even when the problem occurs only after you have installed (well known) programs?

    How to fix this problem?

    Here is the message that comes up with the error:

    -----

    Description:

    Stopped working

    Signature of the problem:

    Problem event name: APPCRASH

    Application name: Explorer.EXE

    Application version: 6.1.7601.17567

    Application timestamp: 4d672ee4

    Fault Module name: ASUSWSShellExt64.dll

    Fault Module Version: 1.1.0.27

    Timestamp of Module error: 4c7f631d

    Exception code: c0000005

    Exception offset: 00000000000051da

    OS version: 6.1.7601.2.1.0.768.3

    Locale ID: 1043

    Read our privacy statement online:

    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

    If the online privacy statement is not available, please read our offline privacy statement:

    C:\Windows\system32\en-US\erofflps.txt

    -----

    Just to follow up on the post of madtor.

    The shell extension which seems to be the cause of the accident is the ASUSWSShellExt64.dll:

    Fault Module name: ASUSWSShellExt64.dll

    Fault Module Version: 1.1.0.27

    The ASUSWSShellExt64.dll appears to be from ASUS WebStorage software.

    The same problem has been reported in the following link:

    http://Forum.asuswebstorage.com/showtopic.aspx?TopicId=205

    Try to update or if necessary, uninstall the software ASUS WebStorage.

  • Satellite A200 - IE7 windows 'restore down' when using the Tracker pad

    Hi, I recently bought a Satellite A200 - 1VO and when using the laptop without a windows mouse explore 'restore down' at random.

    I found a thread on the site of the Internet USER who said that if his past not with a mouse, it may need tracker drivers up-to-date.
    You can also consider its under warranty.
    Any ideas anyone?

    Hello

    It s a bit confused what you´ve writes down. What do you mean exactly, where´s the problem and what you want to tell us when writing:

    > and when using the laptop without a windows mouse explore 'restore down' at random.
    >
    > I found a thread on the site of the Internet USER who said that if his past not with a mouse, it may need tracker drivers up-to-date.

    Whereas it should be, where´s now the problem?

    Please give clear and understandable feedback, then I and other users you could point to the solution.

    THX

  • Windows Explorer crashes when you try to open avi files

    I can't open avi files as windows Explorer crashes, if I open even a folder with an AVI in it, then windows Explorer crashes.

    I tried to run the Mats_run_codec from microsoft, but it just says: I need to run dot_run_fx (box 2), but when I run it I get the error message - system error: 0 x 80131107.

    I am running windows XP SP3

    I have seen "Event Viewer" and found the following: application

    Event type: error

    Event source: Application Error Event Category: no ID:1000 event date of publication: 14/03/2011

    Time: 20:04:22 user: n/a

    Description:

    Failing application iexplore.exe, version 6.0.2900.5512, failed module urlmon.dll, version 8.0.6001.19019, address 0x0002df6e failure. and the other error event is - Faulting application explorer.exe, version 6.0.2900.5512, failed module ntdll.dll, version 5.1.2600.6055, fault address 0 x 00011053.

    I hope someone can help as this has happened for a few weeks now.

    Firefly1z

    FIXED! Large.

    Windows Essentials Codec Pack (WECP) corrected all the problems immediately.

    "WECP is designed as an almost complete solution for all your video and audio should" see: http://www.mediacodec.org/

Maybe you are looking for