ESX 4.1 and LSI Megaraid Storage Manager

Similar Questions

• LSI MegaRAID Storage Manager on VMware ESXi 4.0

  Hi guys,.

  We tried to install on VMware ESXi 4.0 MegaRAID Storage Manager (IBM x 3550 M2) and it uses Controller RAID MegaRAID SAS 8808E to monitor the hard disk status but could not be able to install and it returned the error as attaché

  We followed the procedure as shown in the following ibm Web site

  1.6 MegaRAID Manager storage system to a VMWare ESX Server

  Follow these steps to install the on a MegaRAID Storage Manager

  VMWare ESX Server:

  1. download the latest MSM to ibm.com

  2 unzip the and copy MSM_linux_installer - 501.01.tar.gz on a USB key.

  3. from the ESX Server, in the console root, type the following command

  to identify the USB device: fdisk-l

  4. type the following command: mount/mnt/dev / {name of the USB device}

  5. type the following command: cd/mnt

  6. type the following command to copy MSM_linux_installer - 501.01.tar.gz in the occupied Palestinian territories

  file: cp MSM_linux_installer - 501.01.tar.gz / opt

  7. type the following command to decompress the package gunzip MSM_linux_installer - 501.01.tar.gz

  8 type the following command to unzip the package tar - vxf MSM_linux_installer - 501.01.tar

  9. replace the directories with the path/opt/disk

  10 tapez./vmware_install.sh to install MSM

  11. Select version of VMware

  a. enter 1 to install Vmware 3.5

  b enter 2 for VMware 4.0 install

  12. Select the storlib option

  a. Enter n If you want to use the Inbox storlib driver

  b. Enter y if you want to install the storlib delivered with MSM

  IBM recommends 'y' is selected for use packed with MSM, storlib by selecting "n" can

  cause some features of MSM does not function properly

  I would like to know if I use the correct version of the Storage Manager Application MegaRAID for VMware ESXi 4.0

  
  

  If not could someone please advise on how to proceed with the installation and troubleshooting

  Please find the file of errors as attaché

  
  

  Greatly appreciate your help

  
  

  Thanks in advance,

  Vignesh
  

  Check if help: vSphere unknown health status ' vSphere ' eMware »»

• LSI MegaRAID Storage Manager and Dell PERC cards?

  Hi all

  I have a Dell PERC 6 / i in my whitebox ESXi 4 server and I seem to be missing some options when connecting to it via the LSI MegaRAID 2.91 Storage Manager - 05. Basically, it seems the only operation I can do is take the disks offline. I have no option to create tables, add/remove disks in bays or change RAID levels.

  I can do all these things from the BIOS, this is obviously not the card. I had a glance the BIOS if it was something in TeleManagement prevents there but could not see anything, and I was wondering if these limitations due to a cut the officer of management in ESXi or something? If not, what could be causing the problem? When I log in MSM I use the account root on ESXi and MSM reports that I have full access.  As it is MSM is not very good for anything other than general information about my disks, card and backup battery.

  When I log in MSM I use the account root on ESXi and MSM reports that I have full access. As it is MSM is not very good for anything other than general information about my disks, card and backup battery.

  Have you installed the OEM ESXi version for Dell machines, or just a generic of VM Ware?  If you install ESX (with console) you can then install OM, and will give you the access you want.  You can manage all of this on the web.  Otherwise ESXi is limited, and it is a known issue.

  Have you tried to discuss with Dell?

• With the help of the IBM MSM Megaraid Storage Manager

  I need to manage some disks (raid 1, 5) Bay in an ESX host, without restart or shut down the system, my server is a Lenovo with a LSI ServeRAID BR10i SAS controller, I download the MSM for Vmware Storage Manager, I installed it, but I can't launch the User Interface.

  When I started the: commande./startupui.sh error is:

  #./startupui.sh

  Exception in thread "main" java.lang.NoClassDefFoundError: GUI/VivaldiStartupDialog

  Caused by: java.lang.ClassNotFoundException: GUI. VivaldiStartupDialog

  java.net.URLClassLoader to $1.run (unknown Source)

  at java.security.AccessController.doPrivileged (Native Method)

  at java.net.URLClassLoader.findClass (unknown Source)

  at java.lang.ClassLoader.loadClass (unknown Source)

  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (unknown Source)

  at java.lang.ClassLoader.loadClass (unknown Source)

  at java.lang.ClassLoader.loadClassInternal (unknown Source)

  The main class is not found: GUI. VivaldiStartupDialog.  Program ends.

  #

  and when I run: commande./starthelp.sh:

  #./starthelp.sh

  en_US. UTF-8

  who: mozilla not in (/ usr/kerberos/sbin: / usr/kerberos/bin: / usr/local/sbin: / usr/local/bin: / sbin: / bin: / usr/sbin: / usr/bin: / root/bin)

  Mozilla does not exist

  who: no firefox in (/ usr/kerberos/sbin: / usr/kerberos/bin: / usr/local/sbin: / usr/local/bin: / sbin: / bin: / usr/sbin: / usr/bin: / root/bin)

  There is no Firefox

  Support browser are not installed on this system. Please install mozilla/firefox to launch help

  #

  I have already installed Mozilla firefox.

  Any ideas?

  Thank you

  Here is a link to the guide. FTP://FTP.software.IBM.com/systems/support/system_x_pdf/ibm_sw_msm_1.00-install-guide_vmware_noarch.PDF

  There are instructions to open the required ports in the firewall ESX and start and stop the service of msm in the ESX console. You need install the client Windows MSM Megaraid Storage Manager and manage that.

• ESX 4.1 and ESXi4.1 - Dell management tools

  OK, so what I understand starting with ESX 4.1 there is no console service, correct?

  So if we are moving from 4.0 to 4.1 to just install ESXi now that comes preinstallled with Dell management tools or keep with ESX 4.1?  If so, how do install us these tools once the console service disappeared?

  Hello.

  OK, so what I understand starting with ESX 4.1 there is no console service, correct?

  The service console is still there in ESX 4.1.  This will be the last version of the product to be shipped with the service console.

  So if we are moving from 4.0 to 4.1 to just install ESXi now that comes preinstallled with Dell management tools or keep with ESX 4.1?

  It boils at ease you are away of ESX and passes with ESXi and perhaps how much you rely on the service console.  On the operational level, things are different.  Do you have other agents or applications that require the service console?

  If so, how do install us these tools once the console service disappeared?

  For Dell boxes, you download Dell OpenManage Offline and VIB for ESXi group and then manage it remotely.  You use the vSphere CLI or vMA to install the bundle VIB offline.

  Good luck!

• Satellite A200-10W and WXP - Storage Manager installation issue

  First of all, I'm sorry for my bad English.

  After a downgrade from succesfull from Vista to Xp on my computer, from "slipstreaming" with the help of the program N-Lite, I have created a bootable cd with xp and intel matrix storage manager driver, also driver audio realtek high definition audio. The computer worked fine, but I had to format. Then I did the XP installation from bootable cd, I create the first time.
  After the restart I continue the instalation of the drivers they are toshiba authorized site.
  hereby order:
  (the Bios are for xp)
  Chipset
  storage
  view
  sound
  LAN driver
  WLAN driver etc.

  But the Storage Manager is not installed

  Click here

  Date last modified 18/09/07
  Intel Corporation
  Type Storage Manager
  Version 7.5.0.1017
  __Satellite (PSAEC), __________ A200

  Thanks in advance for your answers

  You may have changed the option compatibility ACHI SATA controller Mode settings in the advanced settings of the BIOS?

• Need help with XP installed. stuck at: Intel Matrix Storage Manager Driver

  I bought a new laptop 2.0 ghz with blah blah vista but I want to change to XP.

  I have
  bought a new copy of XP and I'm ready to go, then first question was in
  installation the screen says cannot find the installed hard drive.

  I have
  then found some wire somewhere I've lost that said to buy a
  external floppy drive and downloaded this floppy driver thingy that I
  need to go beyond this stage from the toshiba Web site...

  FYI driver name: SA200 ACHI F6-1017-XP

  That
  well work... when he said press F8 if you agree to install XP I almost
  wet me anyway after it formatted the drive it asked me this:

  Insert the diskette labeled:

  * Intel Matrix Storage Manager Driver *.

  in drive A:

  * Press ENTER when ready

  WTF tell you laptop? can someone help me please you after this point?

  :-(:-(, I want only XP is installed.

  So far its been like 3 weeks since I tried to install it

  Post edited by: IamMILOS

  You just need to install a driver, Intel Matrix Storage Manager.
  As the name said it s an Intel driver and can be found on the Intel page or you can download it from the European driver Toshiba page too.
  Check your area driver books and search for storage manager or package of robson.

  I recommend also to search in this forum for similar discussions on Intel Matrix Storage Manager Driver.

  Good bye

• EqualLogic 'virtual storage manager' does not appear in viClient

  I have installed and configured all the options necessary to HITVE and the 'virtual storage manager' does not pull through?

  On my home screen, to the title of "Solutions and Applications" - it indicates that three of the components by default HITVE, but not Virtual Storage Manager?

  Any ideas?

  I have HITVE not published, restarted, rebooted vCentre, solves all Commons - but still no module?

  VMware Storage Manager VSM v3.5, (formerly ASM/EV) was published on the web.  It's much improved then I would say that you give it a try.

• Comparison between ESX 4, Xen and Hyper-V

  Hello!

  Someone at - it a (new) comparison between ESX 4, Xen and Hyper V? Management performance, stability, cost and so on.

  Thank you to

  Hello

  Visit this link for the last comparison http://www.it20.info/misc/virtualizationscomparison.htm

  http://ctistrategy.com/2009/08/18/VMware-vSphere-Microsoft-HyperV-whitepaper/

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  Prakash

• Problems with LSI MegaRaid 9260-8i and ESXi 4.1

  Hello

  It's my first dappled in virtualization and got everything works pretty well for me except for one thing: esxi 4.1 does not allow me to use all the storage I allocated on my table of RAID5 on my LSI MegaRaid 9260-8i card. When I go in the vSphere client and try to create a data store, it recognizes the 2.73 TB logical drive except when it creates it is only 739,5 GB in size. Am I missing something here? I can't expand it, and it doesn't seem to be running from one of the physical disks, I have attached a few screenshots to illustrate the problem.

  Thanks for any help in advance!

  You create scopes of 2T and assemble them.

  I had to do this:

  localhost > /c4 set autocarve = on

  localhost > / c4 add type = disk = 0-3 name = RAID0 raid0

  localhost > / c4/u0 show

  Unit status % RCmpl %V/I/M VPort UnitType band Size (GB)
  ------------------------------------------------------------------------
  U0 RAID-0 OK - 256K 5587.89
  U0-0 DISK OK - p0 - 1396.97
  U0-1 DISK OK - p1 - 1396.97
  U0-2 DISK OK - p2 - 1396.97
  U0-3 DISK OK - p3 - 1396.97
  U0/v0 Volume - 2048
  U0/v1 Volume - 2048
  U0/v2 Volume - 1491.89

  Then you can create the data store by using three volumes.  Create it with the first, and then increase with the other two.

• What is the date of GA of Foglight for Enterprise Virtualization v. 7.0 and Storage Manager 3.0

  Hello

  I was wondering what should Foglight for Enterprise Virtualization v. 7.0 and Storage Manager 3.0 available for download

  Thank you

  Eli

  Foglight for virtualization 7.0 is now available on Supportlink here. Storage Management 3.0 is available here.

• Storage utilization & iCloud > storage management > Photos and camera

  I'm trying to free up storage on my iPhone 6 more running iOS 9.3.1. Photos is empty. Recently deleted photos is empty. Photos is disabled in settings > icloud > photos. The rockers are disabled in the settings > photos and camera. But its still appearing as using 440 MB of storage in the photo library and 30.6 MB in shared photo streams.

  

  How to explain and free this storage? Are there ghosts stored photos? All other discussions on this topic as the change of date and time has not worked for me.

  Is this storage room # or iCloud?

  If you connect to iCloud.com, see you there in Photos?

• Fault tolerance with an ESX host and two NFS storage pools

  Is it possible to have a fault with the tolerant pair tolerance fault running on the same ESX host, but each partner of a couple running on a separate NFS share?

  N ° you will need:

  2 ESX host

  1 x shared storage

  1 x THICKNESS VMDK provisioned.

  In your case, it's completely the opposite.

  Duncan

  VMware communities user moderator | VCP | VCDX

  -

• Get the error code 10 - LSI MegaRaid SAS 9261-8i device cannot start.

  How can I solve my problem of storage controllers? Get an error message stating: LSI MegaRaid SAS 9261-8i - device may not start (code 10)

  Looking at the web site of LSI, I see that they have released a driver updated on 8/10.  You should probably download and install it.  Here is the first part of the file read me for it:

  *******************************************

  Corp. LSI MegaRAID Windows drivers

  *******************************************

  Release date: 10/08/11
  ======================

  I found this at http://www.lsi.com/support/products/Pages/MegaRAID%20SAS%209261-8i.aspx .

  I hope this helps.  Good luck.

• Installing XP on Tecra S5 - Intel Matrix Storage Manager

  Hello
  Im trying to install XP on a Tecra S5.
  As described in the manual, I have created a disk with Intel Matrix Storage Manager.
  With a floppydrive USB I tried to install XP with the F6 method.
  I could choose the suitable from the disk driver and was able to create partitions and format them.
  Some time later in the installation process, XP asks for the "Intel Matrix Storage Manager.
  in the A: drive.
  Although disk is still in the drive, there is no reaction.
  Even when I change the disc, nothing happens.

  Any ideas?

  Hello

  Start the installation of Windows XP Home edition again, and when necessary to load the driver from the disk using the F6 option. This will make the disk HARD visible for the installation of Windows XP Home edition. When the HARD drive is recognized properly installing WXP. Later when WXP is installed correctly you can change the structure of the partitions.

  I do not understand why is floppy disk suddenly not accessible anymore. Check the data recorded thereon.