With the help of VMware workstation 7 on Win 7 laptop

Similar Questions

• With the help of VM Workstation 8. error when restoring from instant snapshots are not allowed on this virtual machine.

  Hello

  I have takena instant and then try to turn on the machine and get a message:
  "Snapshots are not allowed on this virtual machine!

  When I try to start the snapshot form, I get an error:
  "snapshot restore error, snapshots are not allowed on this virtual machine.

  Can you please help?

  It seems that the configuration (.vmx) file has been deleted (zero byte). I recreated a new you have attached log files. Please replace the file corrupted with VMware Workstation (or at least tab of the virtual machine) closed in order to ensure that the replaced file gets read.

  André

• With the help of VMware ESX in a business continuity Plan

  I'm looking to set up a Plan for continuity of the business using Vmware ESX. I would like to install an outside site that will duplicate a few key servers. Does anyone have any ideas on how I can do this with ESX? Is it as simple as pushing Server snapshots to the offsite location? Any ideas...

  Thank you

  Scott

  Hello

  Welcome to the forums.

  I'm looking to set up a Plan for continuity of the business using Vmware ESX. I would like to install an outside site that will duplicate a few key servers. Does anyone have any ideas on how I can do this with ESX? Is it as simple as pushing Server snapshots to the offsite location? Any ideas...

  One thing to know is that a snapshot in terms of "VMware" is not a full copy of the disc, it is a file that contains the changes to the drive block since the snapshot was created. Snapshots of assistance in making backups of virtual machines running, but allowing the basic disk to copy while the data is written to the snapshot. Then, you're the snapshot.

  So how do DR/BC is having a good backup strategy using one of the available backup/replication tools.

  There are:

  Veeam Backup w/replication

  Vizioncore vRanger backup and vReplicator for replication connection

  EsXpress doctorate for backup (restorations of use for replication)

  There is also some SRM if your San is supported, etc.

  So there are a lot of options the question is how 'real time' you need the data. You could also use the replication SAN, Double Take, etc.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009, Analyst of DABCC
  ====
  Now available on Rough Cuts: ' VMware vSphere (TM) and Virtual Infrastructure Security: ESX security and virtual environment '
  Also available "VMWare ESX Server in the enterprise"
  SearchVMware Pro| Blue gears. Top virtualization security links| Security Round Table Podcast virtualization

• Problem with the Installation of VMWare Workstation 8

  I got this error when installing VMWare Workstation 8

  How can I solve this problem?

  

  Whether or not, it gives me this

  

  and then nothing happens

  Looks like your way of temp has 2 problems - firstly, it is quite long; Secondly, there is a strange character in.

  Try changing your environment a simple C:\TEMP or C:\Windows\Temp folder variable.

• With the help of VMware CP in DMZ networks

  Hello

  I am familiar with the installation and configuration of the PC, but I have a requirement for a customer that the network consists of many DMZ networks, which are all protected by a firewall between them for safety reasons.

  Is there a way that CP can be configured for statistics before several data collectors, located within the DMZ networks to a central collector, related to the data warehouse?

  There is no way that my client can open the ports required for 'normal' data collection, and I was hoping that there would be some sort of SSL connection between the collector in the demilitarized zone and the main collector on the local network.

  The only other option would be to create a single data for each DMZ collector and record each as a separate company...

  You can do in case of problems. After you have created the company, you add can all collectors by going to the company-> save the database ID and click on the Add button. After the first synchronization, wait a few hours and create a project and associate all systems.

  I've done a few times for the same exact reason and it works fine.

  There is no built-in way to link collectors I know. I guess you could plan a robocopy to move each utbox files in a central shipping box, but it would be a pain.

  Dave

• With the help of VMWare Player in internet cafes

  I'm hoping to take a virtual machine from a development environment rudimentary vacationing European cycling for emergency repair work (SQL Server, Microsoft Access, etc.). I had intended to put the virtual machine on a S200 personal IronKey 16 GB Secure Flash Drive: https://www.ironkey.com/personal.

  I would use this VM in internet cafes. Is it possible to run the virtual machine without installing the player on PC for a coffee? For example, it is possible to rotate the player from the same flash player?

  Thank you.

  VMware Player must be properly installed on the host system. Also running the VMS in a drive USB Flash can be very slow with a lot of latency, and I wouldn't recommend well it's certainly doable.

• Publish with the help of VMware thin App

  So far, I have:

  Created a package on the deployment server

  Moved the .exe to a folder named DeployMS at the root of C:\ on this server

  Machine for the MSword.exe and created a shortcut from a XP lance Word very well.

  So now, I copied ThinReg from the server to the XP Machine deployment

  and created a file locally beats on the C:\ of the xp machine that has:

  c:\Thinreg.exe/r/a ".
  & lt; Server name & gt; \DeployedMS\MSWord\Microsoft Office Word 2003.exe

  But the word is still not save.  No shortcut in the start menu, can not open .doc to the file. ect...

  Can someone tell me please in the right direction.

  The account has access to the location of the file on the server?

• With the help of LifeCam1.4 MS VX3000 Win XP. When you try to contact video via IM photo looks OK on my computer, but cannot be received by contact. If poster this image can't get out on the interenet. Thank you

  In trying to establish a video contact, I can't image to the recipient.  The image turns on ok my computer when you do the video contact.

  Try to update Windows and LifeCam.

  Ask your friend to update their windows and make sure that you and your contacts use the latest version of IM. It could be the internet connection problem.

  Try to test it with little people and people with a greater internet connection and see the result. If it was even then contact support for your Instant Messaging.

• With the help of powerpoint 2007, windows 7 new Toshiba laptop... moving objects or text boxes is very choppy, not smooth or reactive

  As stated above, that I noticed that when I'm creating work in pwrpoint, or insert images, resize and move the movement is not smooth, very jerky... while resizing, the cursor moves but the real sizinf does not to seconds

  You probably wanted this post in the forum PowerPoint?

  http://social.answers.Microsoft.com/forums/en-us/category/officeppt TaurArian [MVP] 2005-2010 - Update Services

• How to disable the server of VMware Workstation share

  How to disable the sharing of VMware Workstation Server using a configuration of the registry or configuration file. I have several workstations on the network that has VMware workstation 8.0.4 install and I need to turn off sharing for all users. This function is located in preferences/Shared VMs.   I need to be able to adjust this setting to disable remote. The host computers using windows xp. Any help will be appreciated.

  It depends how you are going to access various systems is however here two options that you can include in any method you choose.  We need to create a. CMD file and the other is to use just one. REG file.

  The command Disable_VMwareHostd.cmd of Script can be as simple as:

  net stop VMwareHostd
  reg add HKLM\SYSTEM\CurrentControlSet\services\VMwareHostd /v Start /t REG_DWORD /d 00000004 /f
  

  The Disable_VMwareHostd.reg file would be:

  Windows Registry Editor Version 5.00
  
  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\VMwareHostd]
  "Start"=dword:00000004
  

  Note: Always two empty lines at the end of the .reg file.

  The syntax of the command to execute would be:

  regedit /s Disable_VMwareHostd.reg
  

  Note that just by using a .reg file, you must always stop the VMwareHostd Service, so I would opt for the use of the method of Script command as it will stop the VMwareHostd Service and turn it off at the same time.

  I still have my put networks in place to be able to (with authentication) execute commands remotely and or push the or the files that are necessary to achieve the objective.  In a case like this, when I had hundreds of systems to change I write a binary executable to fix the problem, which would automatically run when the user logged on to the domain, but if you don't have programming skills so then using a Script command and or file Reg can / will do the job.

• How to solve the problem of VMWare Workstation 8 - unable to open/dev/vmmon

  Initially, I had this problem in March 2011 after installing VMWare Workstation 7 on a lab machine 5.7 RHEL and attempt to boot an image I know was good and should work. .  Someone else fixed the problem for me - I think they had to install a new/different libraries (vmmon.o and vmnet.o for vmware).  However, I find no information detailing what has been done to solve the problem.

  I see the same error on the same machine after upgrading to VMWare Workstation 7.0 for VMWare Workstation 8.0.

  1 here are the mistakes I see:

  a. "Could not open/dev/vmmon.

  b. "failed to initialize the surveillance apparatus.
  c. "cannot change the power state of VM: cannot find a valid peers to connect to.

  Also, when I run the stop etc/init.d/vmware, then run /etc/init.d/vmware start, I see that the State of "Virtual Machine Monitor" is DOWN.

  
  2 here is the information on VMWare Workstation:

  VMWare Workstation 8.0.1 build 528992

  3 here is the RHEL uname - information for the host:

  2.6.18 - 274.7.1.el5xen Linux #1 SMP xxx.xxx.xxx kills Oct 17 12:06:22 EDT 2011 x86_64 x86_64 GNU/Linux
  Release of RedHat Enterprise Linux Server 5.7 (Tikanga)

  The problem could be that the version of vmmon.o and vmnet.o that comes by default with vmware does not work with linux kernel version I have on my system.  I think I need to build a new vmmon.o and vmnet.o on my particular 5.7 RHEL.

  I found that to build a new version of vmmon.o you Executive vmware - config.pl.  I have not just on my machine, and I was not able to find on the internet.

  Here is the version of vmmon.o (for RHEL 5) that I have installed on my machine:
  /usr/lib/VMware/modules/binary/BLD-2.6.18-8.EL5-x86_64smp-RHEL5/objects/vmmon.o

  Here is the version of rhel5 I use:
  2.6.18 - 274.12.1.el5xen
  It is possible that the vmmon.o using bld - 2.6.18 - 8.el5 - x86_64smp-RHEL5 is not compatible with the kernel 2.6.18 - I 274.12.1.el5xen.

  Please help me find vmware - config.pl so I can build my own vmmon.o and vmnet.o

  do not use a kernel XEN enabled when you install Workstation

• With the help of com 1

  I have VMware 7.1.6 build 744570. With the help of 'Virtual Machine Settings' and 'Add', I am able to create a serial port as "serial port 2" and "serial port 3", but I can't create port 1 (a.k.a. com1).

  Someone at - it ideas?

  By default, the tool ThinPrint VMware uses COM1.  He is the host printer can be used without having to install specific printer drivers in the comments.  I normally do not use ThinPrint so I just remove the printer settings of the virtual machine and then when I add a Serial Port, which he defined as COM1.

• With the help of ActiveSync

  I just got the Samsung Galaxy S4 and I'm looking to find an e-mail with the help of ActiveSync client; However, it is precarious with our administrators having the ability to remote wipe our personal devices. In short, with are all the other available similar policies and remote wipe sandboxed for this application? or apply to the device as a whole? There may be a white paper available to read more about this? Is there a free trial of this application to test the feature?

  Thank you

  Neil

  Hello

  The app is designed to comply with Android Device Policy Manager, so he's going to wipe the device when receiving the order of deletion from the server.

  Management of workspace on personal devices is supported in VMware Horizon Mobile products:

  http://www.VMware.com/products/desktop_virtualization/mobile/overview.html

  To the point, we don't have a free trial version.

• My AirPort Extreme end not implemented with the help of AirPort Utility

  Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.

  When I try to set up as a Wireless extender...

  Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?

  .. .it will not accomplish the synchronization upward with AirPort Utility.

  Which version of AirPort Utility?  If it's on your Mac... and you don't know what version you have...

  Open AirPort Utility

  Click the AirPort Utility menu in the upper left corner of the screen

  Click on about AirPort Utility

  Report on the version number you see here

  You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?

• With the help of iPhone 6 s. try to copy the text message with a tap double and get a bubble with icons. How can I copy the message to paste in another?

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  maryml wrote:

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  Press and hold on the text and wait for the copy/more pop up.