with win 64 pro 8 comment get a driver for the epson stylus color 500 rx scan

with win 64 pro 8 comment get a driver for the epson stylus color 500 rx scan

Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:

Hello

Please get your language in the drop-down list above pour post your question in the language of your choice. The forum you posted is in English only. If you can't find the language of your choice above, options of fees to pay to other international destinations can be found by following the link below:

Thank you

http://support.Microsoft.com/common/international.aspx

Tags: Windows

Similar Questions

  • How can I get a driver for an Epson Stylus Photo 950 printer that works with Windows 7?

    Original title: How can I get a driver for an Epson Stylus Photo 950 printer that works with Windows 7?

    It is not listed in the list of printer drivers and I can't find anywhere on the web.

    Hello

    http://www.Epson.co.UK/printers-and-all-in-ones/inkjet/Epson-Stylus-Photo-950/drivers-support?target=article&Extn=.html&articleid=3394

    This article from Epson says that the driver is included in Windows 7.

    I don't see any info out there that clearly explains how to add it.  It simply States that you must go to "add a printer".  Looks like you already did this well.

    I would say following upward with support from Epson to see if they can offer some better instructions. Want to know if your hardware current & software will work with Windows 7? Click on these links: *Windows 7 Upgrade Advisor * *Windows 7 Compatibility Center*.

  • Where can I get a driver for the raid on my motherboard controller intel?, promise PDC20319 S150 TX4

    Where can I get a driver for the raid on my motherboard controller intel?   I need for Windows 7.

    Hello

    I suggest you for the link and check the drivers available for the device is only for the Windows XP operating system.

    http://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&keyword=%22promise+PDC20319+S150+TX4%22

    I suggest you contact the manufacturer for additional assistance:

    http://www.Intel.com/p/en_US/support?IID=HDR+support

  • My win7 is not the driver for my epson stylus sx420w can I download one and where I can get it

    My win7 is not the driver for my epson stylus sx420w can I download one and where I can get it

    If the Epson support site isn't a win7 driver and he only appears not one avilable via the add printer on win7 Wizard is not a

  • OfficeJet Pro 8500: There is no driver for the Officejet Pro 8500 for Windows 10?

    Cannot find a driver for the Officejet Pro 8500 on Windows 10

    Former driver is blocked running.  Where is an updated driver?   Worked very well under Windows 8.1.

    Reinstall the driver of windows 8.

  • How can I get a driver for the glide cruzer sandisk flash drive

    How can I get a driver for sandisk cruzer 4 GB flash drive glide? I use win7 32 bit. I have a yellow flag in Device Manager

    Other usb devices work on this PC?

    Is it the same if you try all usb ports?

    You can test the device on another PC?

  • i ' v bought netbook with WIN 7 Starter pack. What to do for the installation of Ms Office

    I ' v bought my first netbook (lenovo s205 mini) with windows 7 starter pack.

    • How to install other things like desktop 03 or 07 & some other essentials windows?
    • Also inform all other i ' v of things to do to make look & work better...
    • I'm a great one of 7 has as snipping tool, sticky note all n... pls help me how to customize all the other n things also...
    • Pls help me as soon as possible...

    I ' v bought my first netbook (lenovo s205 mini) with windows 7 starter pack.

    • How to install other things like desktop 03 or 07 & some other essentials windows?

    Go to a computer with a CD or DVD drive

    Insert your Office 2007 CD in the drive

    Insert a USB key or an external hard drive with enough space (1-2 GB)

    Click Start > computer (or computer if the computer is running Windows XP)

    Open the Office 2007 disk (Browse)

    Press Ctrl + A on your keyboard to select all files on the disk (if the computer is running Windows XP, click Edit > select all, then click on Edit again and copy or if its Windows 7/Vista, click on organize > select all, then click on organize > copy)

    Return to the computer or workstation

    Open the USB key or external storage device

    Right-click in the storage device

    Click new > folder

    Give it a name

    Open it

    Press Ctrl + V on your keyboard to paste all the files on the disk to this folder (if the computer is running Windows XP, click Edit > paste, or if its Windows 7/Vista, click on organize > paste)

    Close all windows

    Eject the storage device

    Carry it to the Netbook, insert it into an available USB port

    Open the folder on the storage device the copy of Microsoft Office copy you

    Run the file setup.exe on the disk

    Proceed with the installation of Microsoft Office.

    ----------------------------

    You can download Windows Essentials to:

    http://Windows.Microsoft.com/en-us/Windows-Live/Essentials-home

    http://techingiteasy.WordPress.com/2009/02/28/installing-Windows-Live-Essentials/

    • Also inform all other i ' v of things to do to make look & work better...

    If you want features such as Aero Glass and the ability to change the background screen and themes, you need to upgrade to a higher edition like Windows 7 Home Premium:

    Microsoft Windows 7 Anytime Upgrade [Starter to Home Premium]

    • I'm a great one of 7 has as snipping tool, sticky note all n... pls help me how to customize all the other n things also...

    You must upgrade to Home Premium for the capture tool. Click Start, type: Notes

    • Pls help me as soon as possible...
  • Where can I get a driver for the mass on an Aspire 9300-3716 storage controller

    I get a message that there no driver installed for the mass storage controller.  Any assistance in finding, it will be appreciated

    Key of the Windows logo + x
    Click on Device Manager

    If the yellow exclamation point is present
    Double click on it
    Choose the tab "Details".
    in the drop-down list, select HardwareIDs
    Click the first value and paste here

  • How to set the power settings - Satellite Pro A10 with Win XP Pro

    I an A10 Pro of the Satellite with Win XP Pro installed and cannot access the power settings. When I go into the power settings in Windows, I get a msg telling me to use Toshiba Power Saver and Win power settings are grayed out.
    I installed pwrsav-spa10-xp-60007-.zip which tells me that it is installing the Toshiba Power Saver, but always Win power settings are greyed out and I can't find no separate application "Toshiba Power Saver".
    The BIOS shows ' version of BIOS ACPI = 1.30.
    Can someone advice how to change the power settings please?
    Thnx.

    Dave

    Hi Dave,.

    You have the "Toshiba common Modules" installed? They must first of all for many models of Toshiba, and power settings module is an add-on for that.

    If you do not have the appropriate restoration or the utility CD handy, the drivers can be downloaded from the Web from Toshiba website.

    I hope this helps, let us know how you go

    Weezle

  • new computer with win 7 pro when it is connected to a Flash drive or external hard drive poster, you have currently not authorized to access this folder or location is not available

    There are now 4 computers in front of me.

    Two are laptops 17 inch hp (consumer)

    Two are workstations mobile hp 17 inch (company)

    On the consumer books, I can view the files on my external hard drive 1 to and 1 GB player.

    On the company workstation (mobile), I'm not able to view the files on the hard drive or flash drive.

    I need your help so that I can save files from the internal hard drive of the mobile platform of book z hard disk external.  And I need to be able to reconnect the external drives and readers to the Zbook mobile workstation to transfer files to transfer flash.

    These are the pop ups that appear for each when displaying of readers by opening my computer:

    When left click hard disk drive a pop up appears with the title bar: location is not available.

    H:\ is not accessible.

    Access is denied.

    Make a right click on the hard drive allows FreeAgent GoFlex drive opening (h :)) properties)

    The tabs are ReadyBoost, previous Versions, Quota, customize, general, tools, hardware, sharing, security

    By clicking on security of advances and then permissions then continue and then change my name owner or administrator... both methods result in the same access denied result once again.

    I came across this http://technet.microsoft.com/en-us/library/00d04415-2b2f-422c-b70e-b18ff918c281 is this something I need to study and learn before I am able to connect and use an external drive or flash?  Or is there another problem?  If the answer is in this link, do I have to put emphasis on and why wasn't windows 7 configured so that it is easy to use external drives as in win xp and win 8?  Are all usb ports do not or all drivers of failing or is it a software problem all?

    I was not able by trial and error to display all files on any hard drive or external flash on the two books of z of mobile workstation.

    Then I went to the flash drive.

    Left click on the flash drive produces a pop-up with title bar G:\

    You don't have permission to access this folder.

    Click on continue to get permanent access to this folder.

    After clicking on continue it opens another pop-up with title bar G:\

    You have been denied permission to access this folder.

    To access this folder, you will need to use the Security tab.

    When clicking on the Security tab he opens a new pop with the title bar: removable disk (g) properties

    The tabs are general, tools, hardware, sharing, ReadyBoost, customize

    He did not indicate what to do next.

    Summary:

    Two new computers hp zbook stations mobile work with win 7 pro

    Or computers with their multiple ports usb allows to access my external hard drive or flash drive.

    The external hard disk and flash dirve each work very well with the consumer portable computers hp with winning 8 and 8.1 of win and have worked with computers with win xp.

    How can I get the Replicator hp z book with win 7 pro for usb drives work with external hard drives or external flash drives?

    I have so far done the following:

    (1) run administrative guest with sfc/scannow and it found no violations of integrity

    (2) ran microsoft fixit will be all available Parameters which automatically checked and corrected each book workstation z mobile http://support.microsoft.com/mats/windows_file_and_folder_diag/

    (3) contacted HP support

    (4) checked for malware using microsoft security essentials, malwarebytes and spybot on each mobile workstation

    (5) updated drivers using HP support assistant on each computer

    (6) windows update the device HP support assistant on each computer

    How do two new computers with win 7 pro can be connected to external drives that allow to view the files as they do with win xp and win 8 automatically?

    How can I access my files on the external hard disk and flash the mobile workstation book z?

    The specifications for the mobile workstation of zbook are:

    Operating system: Windows 7 Professional 64-bit Service Pack 1

    Microprocessor: Intel core i7-4800MQ CPU @ 2.7 GHz

    Moemory system: 16 GB of memory on 2 1600 MHz dimm

    Graphics device 1: Nvidia Quadro K3100M

    Graphics device 2: Intel HD 4600 graphics card

    Hard drive 1: SCSI Disk Device

    C: 683.42 (613,62 free go-go)

    D: 12.21 GB (1,3 GB free)

    E: 1.99 GB (1.97 GB free)

    The hard drive is a seagate 1 TB drive that works very well

    The flash drive is a 1 GB drive which works very well

    This problem has been resolved.

    Right-click all methods have not access external external hard drives and flash drives.

    Sharing, permissions, ownership, administrative changes, all method all failed.

    This problem has been resolved by higher HP product support.  Other levels of support were not able to diagnose the problem or fix.

    The problem has been resolved by:

    (1) determine that he was not a NTFS problem

    (2) using the msconfig to isolate a single service

    When the unique service has been disabled the files on any external drives have been available.

    The service of the problem was the HP Client Security.

    This HP Client Security in its default value is set to deny access.

    Then right-click on the drive and change the permissions, ownership, to administrators, using everyone etc. will fail because they are all trumped by the HP Client Security that is set by default to deny access.

    When that client security is changed the drives become available.  It is not information about this when using the computer and this can be learned by trial and error.

    I hope this helps all those who have z book 17 mobile workstations or HP computers that are equipped with client security.

  • controller not installed Ethernet Pavilion dv4t with Win 7 Pro x 64

    Past the laptop computer object of WIn 7 home for Win7 Pro for businesses.  View of web for the HP driver is incomplete and is not a) the wired or b driver) a description in all other network drivers this driver includes the cable part of the network equipment.  So looking for the driver for ethernet controller correct for the subject to WIN7 Pro laptop.  HP technical support if it isn't useful at ALL.  All what they seem to be able to do are read in a script.  They can not seem to find a driver for the controller net ethernet, but the machine is able to order with WIN7 Pro installed.  I am trying to understand this.  For the ethernet controller hardware ID is listed in the Manager of devices such as PCI/VEN_197B & 2392 & SUBSYS_385103C & REV30.  Anyone who has a dv4t which can get the driver installed and I would like to know which manufacturer... Intel (which I don't think it is) RealTek or Jmiron seem to be most commonly installed if I did my research properly.

    Hello

    Well it's certainly a surprise that the driver that you require for the ethernet controller is Atheros and I can find no reference to this HP.

    However, try the following.

    Download the 64-bit inf file for AR8151 on the link below and save it in your downloads folder.

    http://www.Atheros.cz/Atheros-network-download.php?chipset=50&system=6

    It is a compressed file, so if you need an extraction utility, download and install 7 - Zip from the Installer x 64 64-bit .msi on the link below.

    http://www.7-zip.org/

    With 7 - Zip installed, right click the file zipped you download, select Extract 7 - Zip, select the files and then click Ok.

    Cut and paste this folder newly extracted to your desktop for convenience.

    Now open the Device Manager, open network adapters, right-click on ethernet controller and select "Update Driver Software".  Choose "Browse my computer for driver software" then click Browse and navigate to the folder on your desktop and click Next.

    This installs Ok?

    Kind regards

    DP - K

  • HP Z800: HP Z800 refreshed win 7 pro 64... do not finish the windows updates...

    HP Z800 refreshed win 7 pro 64... do not finish the windows updates...

    Newly installed OS - everything seems to work fine, except for the shot without end to WIndows update... Verification of updates. Apparently, this affects the update of Windows 10 as well. Someone at - it ideas? I tried all the options via the site help MS. Merci.

    Greetings,

    Please read this.

    You can wait patiently (updates will appear later) or there is a problem in the article.

    You need to reinstall Windows for the fix. Your PC must be isolated from the network when reinstalling windows. You need to download both updates and install before connecting your PC to the network.

    I used the fix of Ed Bott and it works. But I reinstalled Win 7 again. I wasn't going to wait for hours and hours to get the security updates.

    You can try to install these updates on the problematic installation of Win 7:

    1. apply the Microsoft patch found here. Disconnect from the network.

    2. install the two updates in offline mode and cross your fingers.

    3. repeat on Windows Update.

    See you soon!

  • This summer, I bought a computer with Vista. Will I get a refund for the upgrade to Windows 7?

    This summer, I bought a computer with Vista.  Will I get a refund for the upgrade to Windows 7?

    See: Frequently asked questions - Upgrade Options
    http://www.Microsoft.com/Australia/Windows/buy/offers/upgrade-FAQ.aspx TaurArian [MVP] 2005-2010 - Update Services

  • I have Adobe Acrobat 9 Standard Windows. I replaced my PC with a Mac. I need a download link for the Mac version of Adobe Acrobat 9 Standard. I am only to find a link for the Pro edition.

    I have Adobe Acrobat 9 Standard Windows. I replaced my PC with a Mac. I need a download link for the Mac version of Adobe Acrobat 9 Standard. I am only to find a link for the Pro edition.

    Your license will work for the Windows version and it is too old to qualify for a swap of platform (I don't know if it is a Mac version of standard far in the back - I think that there is for Windows).

  • When I defragment I get message "suspended for the shadow copy of volume.

    Original title: Defrag problem

    When I defragment I get message 'suspended for the shadow copy of volume' whatever that means?

    The VSS Service should not be run unless you do some kind of a backup that uses it.

    Are you using any kind of third-party backup software that would force the VSS Service to run all the time?

    If defrag used to work, what do you think might have changed since the last time it worked correctly?

    I have my VSS Service set to "Manual" - in this way, it not start with XP on a restart and run all day to do nothing, but he will start by itself when I do a backup and stop when the backup is complete (it runs when you need).

    You check the VSS Service, click Start, run and enter in the box:

    services.msc

    Click OK to open the Services applet and find the Volume Shadow Copy Service.

    Select the status and Startup Type columns.

    If you do not have a backup at this time there, the Status column must be empty (not started) and the Startup Type should be set to manual.

    If this is not the case, let a right-click on the VSS Service, properties, Stop (to stop it), change the Startup Type to manual and OK your way out (ensure that it is reactivated by itself).  If it starts up again without a valid reason, you need to understand why and fix it.  Restart to make sure the changes 'stick '.

    See if your defragmentation works when the VSS Service does not work...

Maybe you are looking for