Withdrawal of the first two lines of the paragraph?
Hello
I want to have a dash on the two first lines of my paragraph, how do we make this happen? I don't seem to be possible.
The only way I know how is the second line indented manually. But as you can imagine is not a very effective way, if it produces more than 200 hundred times
PS: I use Indesign CS 5.5
Thank you
Hamid
AHA! Heymit, here's the trick that I use to do a little of the drop cap. Very simple: use a tank style!
Tags: InDesign
Similar Questions
-
my jet hp 5740 desktop prints only the first two lines and stop printing. Why?
After opening documents and viewing, the printer only prints the title of the document.
Hi John,.
1. what operating system do you use?
2. don't you make changes to the computer before the show?
3. this happens with a particular application?
Method 1: follow the steps described in the links below and check if that helps.
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows?T1=tab02
http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
Method 2: Download and install drivers from the link provided below.
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=357202&LC=en&cc=us&DLC=en&lang=en&cc=us
Hope it will be useful.
-
Interactive and first two report lines "BOLD"
Dear gurus,
I have an interactive report with 3 select parts.
Selects the first two create a line for each.
The third will generate up to 150 lines.
I am looking for something simple and good to get the first two lines / selects "BOLD"?
Suite structure is used (not the exact code):
Select null null, one, two,... from double
Group of...
Union of all the
Select null, null,... from two
Group of...
Union of all the
Select null, null,... twice.
Someone at - it an idea?
Hello
Thank you for your help.
I want to just use the first 2 rows, I use following code Javascript: (when the page loads)
If (document. GetElementsByTagName)
{
var table = document.getElementById (gTable);
lines of the var = table.getElementsByTagName ("tr");
Rows.Item (1).style.fontWeight = 'bolder ';
Rows.Item (2).style.fontWeight = 'bolder ';
}
Thanks again for your help
This problem is solved
-
How do I put the sender first and second in Inbox display two lines by?
I do not what is talking about the subject. I want the sender name first and in large print. The subject is first on this computer. The sender's name is first on another computer. How to control the display of two lines?
Ok. I can't help you. It is a forum XP and Windows Live Mail Forum is located here:
http://windowslivehelp.com/forums.aspx?ProductID=15 -
Mr President
Jdev worm is 12.2.1
How to add two lines when the second row is not visible, but also gets the first data line too?
I want to add two lines like below picture, but want the second to remain invisible.
I asked this question but my way of asking was wrong, that's why for me once again.
Concerning
Try to follow these steps:
1. in the database table to add the new column "JOIN_COLUMN" and add the new sequence "JOIN_SEQ".
2. Add this new column in the entity object. (You can add this in entity object by right clicking on the entity object and then select "Synchronize with database" then the new column and press on sync)
3. in your bookmark create button to create only one line NOT 2 rows.
4 - Open the object entity--> java--> java class--> on the entity object class generate and Tick tick on the accessors and methods of data manipulation
5 - Open the generated class to EntityImpl and go to the doDML method and write this code
protected void doDML(int operation, TransactionEvent e) { if(operation == DML_INSERT) { SequenceImpl seq = new SequenceImpl("JOIN_SEQ", getDBTransaction()); oracle.jbo.domain.Number seqValue = seq.getSequenceNumber(); setJoinColumn(seqValue); insertSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn()); } if(operation == DML_UPDATE) { updateSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn()); } super.doDML(operation, e); }
private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn) { PreparedStatement stat = null; try { String sql = "Insert into table_name (COLUMN_1,COLUMN_2,COLUMN_3,JOIN_COLUMN, HIDDEN_COLUMN) values ('" + value1 + "','" + value2 + "','" + value3 + "','" + joinColumn + "', 1)"; stat = getDBTransaction().createPreparedStatement(sql, 1); stat.executeUpdate(); } catch (Exception e) { e.printStackTrace(); } finally { try { stat.close(); } catch (Exception e) { e.printStackTrace(); } } } private void updateSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn) { PreparedStatement stat = null; try { String sql = "update table_name set column_1='" + value1 + "', column_2='" + value2 + "', column_3='" + value3 + "' where JOIN_COLUMN='" + joinColumn + "'"; stat = getDBTransaction().createPreparedStatement(sql, 1); stat.executeUpdate(); } catch (Exception e) { e.printStackTrace(); } finally { try { stat.close(); } catch (Exception e) { e.printStackTrace(); } } }
-
How can I get the first line of a paragraph style indent, but others not in withdrawal
I created a style of paragraph indented on the first line of each paragraph. In most of the books, at the start of the first line of a chapter, this line is not indented while the rest are. Is there a way to set up in InDesign CS3? Is the only way to make this work is to manually go out the tab at the start of each chapter?
2 paragraph styles.
1 paragraph style has no dash
2nd paragraph style has dash
set "next style" in 1st paragraph for paragraph 2e style style
the "next style" value in the style of paragraph 2 to "even".
Existing text.
Select all of the text
Right-click on the 1 paragraph style and select apply style then next style.
New text (typeing)
Start typing with the selected 1 paragraph style. When you press ENTER to start a new paragraph, the style will switch automatically to the 2nd paragraph style to what manually enable you return.
HTH
-mt
-
Draw two lines up to the maximum length of photo
Hello
The coordinates of the edge detection line is attached. How can I draw these two lines in an imageso line extends and catches up to the maximum length of the image. ? IE first extract the point of intersection of these two lines and look if it is less than the actual length of the image (for example for an image of 1040 X 740, the point of intersection should be behind / less than 1040)
any ideas?
Thank you
I found the extrapolation function... I installed VIPM and installed the MGI package.
-
Hello
Currently, we have two signals which are physically and logically linked together on the same line of data acquisition. The first, 'I' and the second signal, 'Q', are both related to "Ai6" (PIN 23) and "Ai GND" (Earth). However, when we probe the two lines coming our function "signal split", I drove Q by about 0.5ms. My question is, if these two lines are actually bound together physically and logically, then why are they phase shifted if they are both the same channel? They should be exact matches. I thought that the phase delay inter-channel occurs only in what concerns channels being read from data acquisition. I have attached a few screenshots as well.
Input signal is 20 kHz. Sampling rate is 40.5 kHz, number of samples/point is 1000.
Thank you.
Best,
Saami
System - Ultrawave Labs engineer
The board you are using is a multiplex. If you create several virtual channels, pointing to the same physical channel, we can enjoy this channel once for each channel. So what's happening essentially is that the physical channel was sampled once for channe 'I', then again for the channel 'Q' with a delay of a few milliseconds in between.
-
Hyperlinks on the two lines does not not on pdf
I create hyperlinks (to web pages) in InDesign CS 6 then pdf it. However, all links spread over two lines do not bind to the full hyperlink for example they only link to the first line.
For example:
http://EUR-Lex.europa.EU/legal-content/en/
TXT /? URI = celex:32006 L 0025
When I got the InDesign pdf file in Acrobat (with hyperlinks marked in the window) it links only to the first line, for example
http://EUR-Lex.europa.EU/legal-content/en/
Another example:
www.PLOSOne.org/article/info:doi/10.1371/
Journal.Pone.0053379
The really strange thing is that in some cases it works OK for example:
www.NHS.uk/ipgmedia/national/Epilepsy%20Action/Assets/
photosensitiveepilepsy.PDF
Can anyone shed some light on this for me - it's really frustrating...
Thank you
Sheila
It must create the hyperlink in the hyperlinks Panel (window > interactive > hyperlinks) as a URL. If you have not done so, Acrobat tries to read the URL from the text in the PDF file and will stop with each statement or other specific characters.
-
I can't find how to change the distance between two lines of text
ureself
ureselfI mean the vertical distance between the two lines with mmmmm
http://codeverge.com/Mozilla.support.Thunderbird/line-spacing-how-to-double-space/1402587
http://forums.mozillazine.org/viewtopic.php?f=39 & t = 403487
-
I was typing an email and when I would go to the next line, it will skip two lines instead of a single line. How can I fix the problem?
I'm not sure that you understand the problem. Could include a screenshot of it just after what happens?
If you need help to create a screenshot, please see How to make a screenshot of my problem?
Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.
Thank you!
-
I followed the advice and imported IE Favorites, but only the first two files have met. How can I get all THE files across please?
Wow. I think I will like Firefox if the aid is so easily available, quick and as good as this. Fixed right away
Thank you very much
Kevod -
The procedure of procurement of the game Clash of Clans first two payments $9.99 $4.44 and the second did not gems continued with the developer of the game and they told me to solve this problem continue with Apple iTunes... help solve me this problem and the compensatory jewelry
Double-see your message, my first response to this topic tells you how to contact iTunes Support (we are fellow users): Re: the procurement process of the Clash game Clans the amount was deducted from the iTunes account and do not have t...
-
How to set the title button in two lines
Hi all
Someone can give me a code example or an idea that can help me to define the button title in multiline, mean that I want to print the date currunt as '2009-12-11 11:42:45 ' in two lines on the title of the buttonfield.
I tried to use the "\n" character to break the line, but it was not a job for me. I put in a title, for example,
String title = "/ tej n Hi how are you?
ButtonField btn = new ButtonField (title);
Add (BTN);
But it's not working.
Thanks in advance,
Using custom field, we can achieve it. More wire has the solution for you
http://supportforums.BlackBerry.com/T5/Java-development/multi-line-ButtonField/m-p/94564#M10529
-
The two lines EX90 and add speed dial
My friends, I need help in this case, we replaced digital phone with EX90 new to our general manager. but there is some functionality was available on the old phone:
1 - the old phone has buttons around the screen as a speed dial buttons for certain numbers of employees
2 - the old phone has two lines one private and one is the direct lineHere, he wants the same features on the EX90:
1. I configured the favorite on the EX90 as a shortcut, but he wanted the speed Dial buttons appear directly on the screen forpress about this directlry.
2 - I have configured the EX90 on CUCM and added the second row but he only appeared, if there is a method to allowcalls on the (direct and private calls on different lines) EX90
Please I need your urgent help
The DefaultPanel Option is only in more recent versions of TC software, I do not remember what version it appeared in, but it is there in the last TC7.1.3. If you don't, you probably use an older version of software on your EX.
It is located in the web interface under Setup, System Configuration, UserInterface touchscreen Panel default.
The options are: none, last, list of contacts, MeetingList and keyboard.
The option of contact list
Another option (although, as for a simple speed dial) is the installation Service that puts a button in the upper left corner of the touch screen. Note: Only facility Service 1 is available in the Panel even if you configure 5 of them.
Wayne
--
Please rememeber the frequency responses and mark your question as answered as appropriate.
Maybe you are looking for
-
Screenshot (command + shift + 4) does not work
I use a Mac Mini running El Capitan. Command-shift-3 works great. What gives?
-
How can I change the background color by default for a Web page where none is specified?
There are many versions I've customized the background color if none has been given to brown to go with the skin I used then. Now, I find with a simple text file is not readable with black against Brown, but I can't find today's version where to put
-
How do I upload photos from my samsung bt3310 on my computer
I installed the disc that came with the cable
-
OfficeJet Premium 8600 - 2 Facer copy format default for trays and legal documents.
Maybe someone reading this can help me with two questions that I have about this printer. (1) how to adjust the printer automatically detects what tray (letter or legal) to print from? By example, if I print a legal document and legal paper in tray 2
-
Open XML, how to write the path
Hello I'm new to the Blackberry development and I hope you can help me with my problem. I try to work with an XML file, and so far, all that does very well as long I had the xml file, I work on, in the folder of my java application and deyployed usin