Wizard cannot install hardware - problem with installing lost Sigma Tel High Def Audio CODEC audio

Similar Questions

• I have a problem with the drag (cursor snap) video and audio stuttering!

  I have an emachine windows vista home edition and have caused problems with the drag (cursor snap) video and audio stuttering.  my hardware configuration includes an HP printer and a video camera from Microsoft with pregnant beyond the keyboard, monitor, and system speakers routine.  Are there updates or the settings that I can apply to correct this problem?

  http://www.eMachines.com/support/drivers.html

  The latest drivers/software for your machine come directly from eMachines.

  Click the link above for them.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot type, hardware problem?

  When the connection of the user, I couldn't type my password because the computer type the letter H continuous. My friend thought it was a problem of a bad keyboard, then it deleted physically from the laptop. I plugged a USB, same problem keyboard. Until I have a chance to press a key, the letter H is displayed continuously & backspace will not remove. Then I reinstalled windows xp, but when the time comes to enter the product key, I can't because of the letter HARMAN etc. Now I'm stuck in an endless install because the message "the file 'asms' on windows xp professional service pack 1 cd is necessary." "The type pathname file is located and click ok." In the box that I have would seize the file, HAROLD constantly. Command button will remove HHH, but when I'm not pressing strand CNTRL of h. The laptop is a Sony Viao pcg-8m3l. Keyboard still deleted cell phone fr. changed the hard drive, tried to reinstall, same prob. Start beeps continuously. Have that before the removal of the keyboard & before you reinstall attempt. Please let me know what hardware problem, I looked over. Thanx

  Hi KaliTender,

  Follow these methods.

  Method 1: Disconnect any external devices to the laptop and see if the problem still occurs.

  Method 2: Boot into the bios and reset

  Note: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If the problem still persists, then contact the manufacturer for more help and information.

  http://eSupport.Sony.com/

• It cannot install the update of high priority KB2572067. Get messages saying can't install updated

  It cannot install high priority updae KB2572067. Get the message saying updates cannot be installed. I could use some help with this problem.

  Hello

  Let us know the Setup error code:

  (a) click Start, click all programs, and then click Windows Update or Microsoft Update.

  (b) on the Windows Update Web site or the Microsoft Update Web site, click on view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  (c) in the status column of this window, find the update failed to install, and then click the red X.

  (d) a new window opens that displays the installation error code.

  Method 1: Boot your system in clean boot mode, and then run Windows updates.

  Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353

  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

  Method 2: Disable the security software installed on your system and then try to run Windows updates.
  Important: Please remember to turn it on once you install updates.

  Method 3: Keep the computer in clean boot mode and disabled security software, please download the update manually from the link provided below and install it.
  Note: Please do not forget to start the system in normal mode and activate the security software, after you install the update manually.

  http://www.Microsoft.com/download/en/details.aspx?ID=27715

  Method 4: Try the steps in the article mentioned below to repair the .net Framework in your system:
  http://support.Microsoft.com/kb/923100

• Cannot change NetworkName (problem with the syntax?)

  First of all, I don't know anything about Powershell, so it is probably a n00b mistake.

  I'm changing the portgroup to a specific NIC of the virtual machine, but it fails, and looks like there is a problem with my syntax and more precisely my definition of the network card.

  Please enlighten me on what I am doing wrong, have tried several different syntaxes now without a bit of luck.

  [vSphere PowerCLI] C:\Program Files (x 86) \VMware\Infrastructure\vSphere PowerCLI > Set-NIC - NIC "Network adapter 2" - don't
  tworkName "NAT" - vm win7-01
  Together-NetworkAdapter: cannot bind parameter "NetworkAdapter". "Could not convert the value of 'Network adapter 2' of type 'System.String' to type '.
  VMware.VimAutomation.ViCore.Types.V1.VirtualDevice.NetworkAdapter ".
  On line: 1 char: 35
  + Set-network adapter - card network < < < < 'Network adapter 2' - NetworkName "NAT" - vm win7-01
  + CategoryInfo: InvalidArgument: (:)) [game-NetworkAdapter], ParameterBindingException)
  + FullyQualifiedErrorId: CannotConvertArgumentNoMessage, VMware.VimAutomation.ViCore.Cmdlets.Commands.VirtualDevice.SetNetworkAdapter

  I think you should do the following

  Get-NetworkAdapter - VM win7-01 | where {$_.} Name - eq 'Network adapter 2'} | Together-NetworkAdapter - NetworkName "NAT" - confirm: $false

  First you "get" the NICs for the virtual machine, and then you filter one you want with the Where-Object cmdlet and finally you set the adapter to the portgroup.

  -Confirm the parameter avoids that you must meet to confirm the change.

• Windows 8 "There is a problem with the driver for bluetooth hands-free audio"

  There is an X symbol by the sound icon, when clicked, it shows "There is a problem with the driver for the audio blue tooth hands-free". Troubleshooting has not been set, said that there is a bluetooth hands-free audio driver problem. In addition, when you look at the audio in Device Manager, error code 19 lights during all the points listed under ' audio, video and game controllers ".

  Hello

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem may occur because of corrupted audio driver or settings.

  I suggest you run this Microsoft fixit and verify.
  Reference:
  Hardware devices do not work or are not detected in Windows
  https://support.Microsoft.com/en-us/mats/hardware_device_problems

  Automatically, he diagnoses and fixes problems with the hardware. Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  I would also say that you uninstall and reinstall the sound drivers under "Audio, video and game controllers" and check.

  To uninstall the driver, please follow these steps:

  a. press Windows + R keys, type devmgmt.msc in the run window and press ENTER.

  b. Click to enlarge "Audio, video and game controllers", right click on the device, and then click Uninstall.

  c. restart the computer.

  Now, reinstall the drivers from the computer manufacturer's website and check the.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Problem with the last 5 minutes of the audio book to cut

  My wife recently bought a Clip Jam for listening to audio books. She had a problem with the end of books - the device does not play the last 4-5 minutes of the last chapter of a book. IOW, it ends at the beginning. It must then go to the desktop PC and listen to the end of the book he (proving it is not a problem with the files themselves). She said that this happens on audiobooks, Audible and audio books, it is in MP3 format.

  Someone has an idea what can happen and how I can help him solve?

  using improved format audible AAX? IIRC: it is a problem only with improved AAX format. Use the Format 4 and that she must play to the end.

• Could not find a stereo mix with windows 7 and IDT High Definition Audio CODEC

  Can someone help me find the stereo Mix using Windows 7 with IDT High Definition Audio CODEC?   So frustrating

  Thank you

  You may have a corrupt user profile.
  Create a new administrative user account. Now log on with this new account.
  Are you able to see the stereo mix option and record yourself?
  If Yes, then you need to use the new profile of the user and the copy on your Favorites.

  First check if your computer is connected to a domain or a workgroup ?

  The padlock indicates that the account is protected by user name and the password .

  Click Start > right click on computer > clickProperties and check that your computer is on Workgroup or domain.

  If in contact with area: http://social.technet.microsoft.com/Forums/en/category/w7itpro, windowsvistaitpro, windowsxpitpro /

  Else If it's working group:

  Click Start > click on 'Network and sharing Center' > click'Advanced sharing Center' and Turn off password protection sharing and save the changes.

  After you save the changes, copy files to other user folders and check.

  Please let us know if a new account help with your question.

  Thank you

  Marilyn

• My Mac Pro has a hardware problem with the updates

  The material inside my Mac Pro's problems to be expandable to level technology current todays.

  There are a lot of new technologies whose PC users seem to be able to use. But my Mac Pro is stuck with tech pushes now 3 years old.

  I tried looking for answers on google, but there is no information. I tried to search for information that Apple has announced update with news about what is happening, but there is none.

  This is a serious question, as my competitors have a huge advantage technology on me as the problem persists.

  Apple does not level the old computers. You can only buy a newer model if the model you have is no more meet your needs. Depending on the particular model of Mac Pro, you have, it may be possible that others have improved the processors. You can find this article on Google. Then, you can always replace the GPU with a newer version that is compatible. But these are things that you would do, not Apple.

• I have a problem with emails lost in my Inbox after I have them compacted

  I compacted my emails as suggested and have done on other occasions without any problems. On this occasion, I lost about 6 months of emails from my Inbox only.

  I followed the instructions given to someone else in this site, I opned the recycling box and file found the ".bak" that was missing. I have a right-click on it and then selected 'restore '.

  I can't find the file in windows Explorer, what do I do now.

  Howard

  The bak file will be in the message store.   The files are hidden there, then go to control panel | Folder options | View and uncheck Hide extensions of known file types and also check in to display the hidden files and folders.  Then go to the message store (in OE location is located on via Tools |) Options | Advanced | Maintenance | Storage folder).  Then you can follow the steps here to import dbx or bak file: www.oehelp.com/backup.aspx#imp1.  If it works, I highly recommend what to backup your messages.  Otherwise, if the file will not import, then my DBXpress program (www.oehelp.com/DBXpress/) may be able to recover what was lost.

  Steve

• Problem with playing video games, DVD and CD audio with windows Vista.

  I had a problem to read these types of discs with my hard drive. It does not recognize that there is a disc at all. This ONLY happens with new discs I get, for example by trying to install a new video game or download a new album that I just got. If I want to play a previously installed game I put game disk in and it works perfectly fine. This only happens with new games that I have not yet installed. E.g. I want to play starcraft, previously installed. I put the cd in starcraft and the game appears as usual. But if I want to install starcraft II nothing happens when I put StarCraft II in the disk drive, even if I go to my computer and double click on your drive, it just opens the CD door and asks to put a disc in when we're already here.

  I tried MR. Fix and it recognizes that there is a problem but is unable to repair. I tried to uninstall the disk driver and not the fixed not restart, but who either.

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burn
  and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  A CD/DVD cleaner might help.

  -----------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How can I fix this error 800703e6 invalid access to memory location tries to install the software driver high definition audio

  After installing windows vista sp2, lost all the sound elements, when I try to reinstall I have error "driver has been installed correctly, impossible to install the software for this driver... when I tried to use windows update, 800703e6, invalid access to memory location error I received...

  You will have the good idea after viewing this thread. http://www.Vistax64.com/sound-audio/291850-no-sound-error-800703e6.html

• ATI high definition Audio device has a driver problem

  All of a sudden Windows 7 can find any Audio device.

  The troubleshooter is running a nd reinstall the drivers down.
  Problems found
  ATI high definition Audio device has a driver problem ATI high definition Audio device has a driver problem There is a problem with the driver for ATI high definition Audio Device. The driver must be reinstalled.	Not fixed
  Reinstall the device driver

  Check the audio device Detected There could be a problem with your audio device.

  I solved it by going to the registry and by locating and removing the UpperFilter = LVUSBSta.sys
  to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class
  I have an Intel mother board DP55WB with an onboard Audio device and Windows 7 Professional.
  LVUSBSta.sys is a virus, Trojan, spyware, adware.
  See http://www.file.net/process/lvusbsta.sys.html

• DeskJet 3050 all-in-in-one J610a: Deskjet 3050 J610a cannot install scanner

  1. I tried to install the printer software for the Deskjet 3050 all-in-in-one J610a on a Dell E6530 with Microsoft Windows 7 Professional computer.

  2. but everything he tried guard fails with the message "installation Failed - the software for your printer cannot be installed."

  3. When you click on the ' details button it shows
  "Setup error. Install the Windows service could not be accessed. This can occur if you are running Windows in safe mode or if Windows install is not properly installed. Contact your support team.

  4. you will then have a solution. He then puts a document "default installation HP - 1601 MSI' on your desktop."
  a. He then opened Windows services to check if the Windows service install is running? Yes it's on my system.
  If I reinstall the same mistakes, as shown in the 2. and 3.

  5. I tried to replace the Windows Installer by running the commands ' msiexec.exe / uninstall ' and "msiexec.exe/regserver" (also tried in safe mode) for both 32-bit and 64-bit versions. Then by restarting. But making the same mistakes as in 2. and 3.

  6. I tried the installation CD and the last Installer downloaded DJ3050_J610_1315 - 1.exe from the Hewlett-Packard Web site. But making the same mistakes as in 2. and 3.

  7. I tried to run Microsoft Fix - it version 50809 who had another option to try. If you run it, it says 'creation creating a restore point, please wait... '. ». After a wait, he says "this Microsoft Fix - it impossible to deal with".

  I tried another more recent version of Microsoft Fix - it (downloaded from the Internet):
  MicrosoftFixit.ProgramInstallUninstall.Run.exe
  Running to check installation problems showed a list of programs to check installation problems.
  But it did not show the installation of HP DJ3050_J610_1315 - 1.exe file or similar in the list it could
  not be fixed.
  If you choose "not listed" then it shows "we have not identified any problems and that's why no fixes have been applied.

  8. If I run the files D3050x64.msi and D3050x32.msi from the CD (using Microsoft Windows install) it also fails with the error, as in 2. and 3.

  9. If I install ' HPSupportSolutionsFramework - 12.3.11.29.exe' it installs, but does nothing. It's probably not running and no instructions on how to do work.
  Update: it is actually a service running in the Microsoft Windows services such as 'HPSupportSolutionsFrameworkService '.
  The executable file is located in C:\Program Files (x 86) \Hewlett-Packard\HP Support Solutions\HPSupportSolutionsFrameworkService.exe
  This service runs, but does not seem to be enabled.
  It adds a controller service background that adjusts automatically to
  run. Delay the start of this service is possible thanks to the function
  Manager. A scheduled task is added to the Windows Task Scheduler in order
  to start the program at various times demand (variable hours of work
  Depending on the version). The software is designed to connect to the
  Internet and adds exceptions to Windows Firewall to do this
  undisturbed.
  Scheduled task
  hpsupportsolutionsframeworkservice.exe is intended as a task with the class '{98FA553D-D703-4E16-9884-F328AC21770F}' (works on registration).
  Service
  hpsupportsolutionsframeworkservice.exe runs as a service named "HP Support Solutions Framework Service" (HPSupportSolutionsFrameworkService) "this service allows the detection of HP products and allows the identification of support solutions for detected products.".
  Boot file (user run once)
  hpdia.exe is loaded only once in the registry of user (HKCU) current as a name of boot file "HP download and install wizard" that charge as "C:\Program Files (x 86) \Hewlett-Packard\HP Support Solutions\Modules\HPDIA.exe" / reboot.
  Windows Firewall enabled program
  hpdevicedetection3.exe is added as a firewall exception for "C:\Program Files (x 86) \Hewlett-Packard\HP.
  Check "Windows Task Manager" for example by running the command line
  Schtasks.exe
  or to run GUI
  Start taskschd.msc
  did not show anything about this service I can say.

  10. by using a troubleshooting earlier, I managed to install * only the printer *. But the * scan * can not be installed.

  See:
  https://community.Spiceworks.com/topic/443342-Windows-7-PC-keeps-trying-to-install-WSD-print-device?...

  1 - run
  rundll32 printui.dll/s/T2
  (this from the cmd.exe command line)
  2 - I couldn't find the 3050 in the list of default constructors (for example, "HP")
  3. - click on the button ' Add... »
  4 - click on the button "next".
  5 - automatically activated for example is 'x 64' '.
  6 - click the button "next".
  7 - click on the 'Have Disk' button... »
  8 - fill the printer Hewlett-Packard CD-ROM drive letter that
  should be in your computer
  For example
  D:
  9 - who will install the printer driver 3050 J610 and display it in the list
  10. - click on the 'Start' button of Microsoft Windows
  11. - Select from the list of "devices and printers".
  12 - if the printer 3050 J610 appears, right-click on it and select
  "Troubleshoot", if not right click, "Add a printer", make sure that
  your printer is on, and then select the printer 3050 and let
  It installs.
  13 - run the first fix to get the printer driver
  14 - run the second fix to make the printer the default printer
  15. - successful on Microsoft Windows 7 Professional execution

  (11 for example if I run the program "HP print and scan doctor program" to troubelshoot (= HPPSdr.exe) it is said that the ' HP445411 (HP Deskjet 3050 J610 series - network 192.168.1.49) - installed). It is said that the full product is not installed, then begins to download. But the executable that it downloads the same DJ3050_610_1315 - 1.exe as downloaded on HP website. So to make the same mistakes as in 2. and 3.

  12 Note: I basically never have no problem with installation on this computer. Only this printer HP 3050 J610a software does not always install.

  13 - tried to run pnutil.exe

  Because I managed to install the * printer driver (but not the * scanner driver) using the command
  rundll32 printui.dll/s/T2
  I was looking for a similar solution method for the scanner.
  So tried for example
  RUNDLL32. EXE, SETUPAPI. DLL, InstallHinfSection DefaultInstall 132 HPScanMiniDrv_DJ3050_J610. INF
  but which failed with the error "failed to install".
  Also tried to navigate this HPScanMiniDrv_DJ3050_J610 file in Windows Explorer. INF
  then right click on the file name and select 'install' in the list, but that showed a dialog box
  "Install error - the INF file selected does not support this method of installation".
  Then I found this link:
  https://social.msdn.Microsoft.com/forums/Windowsdesktop/en-us/60f4b917-93c9-400A-B91A-15375a8793bf/i...
  who suggested using the Microsoft «pnputil.exe» program
  After inserting the installation CD original HP located in D:
  and it points to the file ' HPScanMiniDrv_DJ3050_J610. INF'
  which is present by default on this HP CD,
  and by running this command:
  --- cut here: begin --------------------------------------------------
  d:\ Tuesday, May 30, 16 16:32:33 > pnputil
  Microsoft PnP utility
  Use:
  ------
  PnPUtil.exe [f |-i] [-? |-| d |-e]
  Examples:
  PnPUtil.exe - an a:\usbcam\USBCAM. INF-> Add package specified by INF USBCAM.INF.
  PnPUtil.exe - a:\drivers\*.inf-> c add all packages in c:\drivers\
  PnPUtil.exe-i - one a:\usbcam\USBCAM. INF-> Add and install the driver package
  PnPUtil.exe EI-> list all packages 3rd party
  PnPUtil.exe d oem0.inf-> delete package oem0.inf
  PnPUtil.exe f d oem0.inf-> Force delete package oem0.inf
  PnPUtil.exe -? -> This form to use

  So I ran this command:

  d:\ Tuesday, May 30, 16 16:33:39 > pnputil-i - one HPScanMiniDrv_DJ3050_J610. INF
  Microsoft PnP utility
  Processing inf: HPScanMiniDrv_DJ3050_J610. INF
  The driver installed on a device on the system.
  Successfully added driver package.
  Published name: oem115.inf
  Total attempted: 1
  Number was imported successfully: 1
  --- cut here: end ----------------------------------------------------

  The disk check showed the file "oem115.inf" was indeed installed in the directory "c:\windows\inf\".

  During troubleshooting earlier, I already copied the file
  HPScanMiniDrv_DJ3050_J610.dll
  Located on the HP installation CD
  in the folder
  c:\Windows\System32\
  and also to
  C:\Windows\SysWOW64\

  I then run the steps here:
  http://Windows.Microsoft.com/en-us/Windows/working-with-Scanner-Camera-Installation-Wizard#1TC=Windo...
  Before using the wizard, connect your scanner or camera and turn it on.
  If Windows detects the device and installs the correct driver, you're all set. There is no need to run the wizard.
  To start the scanner and Camera Installation Wizard
  Open the wizard scanners and cameras by clicking on the
  Start button, then click Control Panel.
  In the search box, type scanners and cameras and then click Scanners and cameras.
  Leave administrator needed if you are prompted for an administrator password or a confirmation,
  type the password or provide confirmation.
  I can't find that on Microsoft Windows 7, but clicked on the button 'add a device '.
  This shows the scanners currently present on the system.
  If it is present, double-click it.
  Microsoft Windows will be found the driver for you.

  But he could not find a scanner or install the scanner driver.
  So not solved.

  14 - Note: If a successful installation: for example, you should be able to see the
  device scanner in 'Start' > 'Control panel' > 'System' > ' Imaging
  devices

  15 - I then tried to run Windows fax and scan program
  (you need to install first)
  WFS.exe
  But not find scanner.

  16 - I then connected the printer with a USB cable to the computer.
  He began the installation of the driver and reported a successful installation
  and analysis successfully.
  I guess that somewhere in the previous steps, that the pilots were in the right
  place.
  But it works with my attached USB cable.
  If I try to remove the USB cable it says
  "Cannot find the scanner." No scanner or other source TWAIN found on the system'

  17. I also tried to run the Installation Wizard of HP printer
  http://support.HP.com/in-en/document/c03521864
  but that no longer works.
  It has detected now:

  "HP Deskjet 3050 J 610 series" - network
  But for the network one he noted a problem:
  "The wizard has reported a problem with the software driver for the selected printer."

  "HP Deskjet 3050 J 610 series" - USB
  For this version of the USB what he reported:
  "Basic features drivers seem to be installed for the selected printer." We recommend you to install the complete HP software to get all the features of the printer"

  If you click 'next' again it downloads the usual HP software that you
  can not install. With the same mistakes as in step 2. and 3. here.
  So no solution.

  18 - of the current workarounds:

  a. - possibly try some of the steps above which may take for example, the printer and scanner driver to the right place.
  Then connect a USB, Microsoft Windows should detect the printer / scanner
  and install the drivers.

  But printing should work wireless.

  Disadvantage:

  To analyze you will need to connect using a USB cable and the scanning doesn't work so not wireless.

  b. - buy or use Hamrick VueScan. It installs its own drivers to scan.
  But it is not free software. But it works by scanning wireless also.

  Question: If you have the best solution or workaround solutions, for example to activate
  scan wireless too, please let me know.

  Hello @knudvaneeden,

  It is a great place to get help! I read your post and see that you receive an error when trying to install the software to print, but you have finally managed to install the printer by a USB connection. When you use the printer as a wireless connection, you are not able to scan. Please provide all the detailed steps that you have already tried. I want to help you solve this problem.

  Make sure that you disable the Antivirus software and scan in real time if your software Antivirus has this feature. It can affect the entire software installer.

  Follow this document to see if you can install all drivers: HP monofunctional and printers multifunctional - installing software Fatal Error "fatal error 1601' (MSI error 1601) displays for HP. »

  Try the scan of the painting to see if you have the same problem.

  Run the Print and the doctor Scan and let me know the error codes or if everything is checked. You can attach a screenshot.

  Scanning ports is not open on the router to the origin of this problem. You can contact the router company to verify and to open these ports 9220/9500/427 on the router.

  You can click the 'Thumbs Up' to thank me for my efforts! If this helps you resolve the problem you are experiencing, please click the "accept as Solution. Keep me posted. Good luck!

• Analog multichannel peculiar read problem with PCI-6014 - hardware problem

  Hi all

  I see some very special behaviors with a 6014 when I do a multi-channel analog playback.  I am revamping of existing code to a customer, which implies the passing of the traditional DAQ in the DAQmx.  Traditional DAQ does not use a system based on the tasks, my client was in the process of reading clocked by the software for only one channel at a time, depending on what signal was of interest to both.  (application is a series of tests on a control PCB who will interface with some hardware, checking the answers and tensions and others)

  When I rewrote the application using DAQmx, I created a single task that contains all of the analog inputs of the map (AI0:15).  When I am interested in a particular signal, I indexed the channel since the reading chart data.  The strings that contain the actual data are 0, 1, 3, 4, 5, 6, 7, 13, 14 and 15.  All channels are NRSE.

  One of the signals of interest lights AI7.

  When I connect the AI7 signal with an oscilloscope, I read 2.5V - which is exactly what I expect to see.

  When I read AI7 using MAX, I read 2.5V.

  When I read AI7 by itself using a single channel DAQmx reading (i.e. 1 Samp 1Chan or 1Chan N Samp), I read 2.5V.

  When I read AI7 simultaneously with all the channels that have a greater number of channel (i.e. AI8-15), I read 2.5V.

  When I read AI7 simultaneously with any channel that carries a lower channel number (i.e. AI0-6), I read 2.34V.

  ?????

  For example, if I read AI0:15, I read 2.34V on AI7.  If I read AI0:7, I read 2.34V.  If I read AI7:15, I read 2.5V.  If I read AI7:10, I read 2.5V.  If I read AI6:7, I read 2.34V.  And so on.  Any combination of playback channel which includes results AI0 AI1, AI2, AI3, AI4, AI5 or AI6 during a misreading on AI7.

  All channels read because they are supposed to, no matter what channel is included in the job.  AI7 is the only one that illustrates this behavior.

  I wrote code for the acquisition of data for 10 years now and I have never seen anything like this before. The behavior is consistent.  I am sure that it is a hardware problem with the Special Commission that I use.  That's the advice of my customer, I don't know when they bought it, but I think they have had for years.  I doubt that ever, it has been calibrated.

  I guess it's more I'm curious than anything else - what on earth would cause this behavior?

  I'll tell my client to replace the card, if really I just asked my own knowledge.