Cannot type, hardware problem?

Similar Questions

• Wizard cannot install hardware - problem with installing lost Sigma Tel High Def Audio CODEC audio

  I lost all sound on my PC.  It is the lack of Sigma Tel High Definition Audio CODEC. Said Assistant a device attached to the system is not functioning. System Restore doesn't solve the problem. I have absolutely no sound.

  I have a laptop Gateway MX6214

  Internet explore 8 (XP32)

  PPP

  grampsny

  Hello CarlPost,

  You can start your computer in last known good configuration mode and check.

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

• Cannot type on mouse pad more on Satellite Pro M

  I can't type my mousepad.
  Just stopped one day of work. Buttons work and I can scroll and move the cursor to mad, but don't touch.
  No settings help, and reinstall the drivers of not...

  Any suggestions?

  Hello

  You said that you have checked all the settings of the touchpad and nothing helped.
  Did you also check the settings for single device Touchpad? These settings offer many possibilities of control and you can turn on and off the plate and touching

  However, I must say, for me, it looks like a hardware problem seems the dysfunctions of the touchpad

  A friend of mine had a similar problem with Notepad.
  Suddenly the mouse moved crazy on the screen Courvite and it was not possible to control with touchpad or an external mouse.
  The technician replaced the keyboard and the touchpad and until now everything works then, probably, you will need to replace the touchpad

• Start repair cannot find a problem, but are still unable to start Windows Vista successfully.

  So here's the skinny.  I have a PC with Windows Vista Home Premium 64-bit.  I came home today and I tried to start it up, it got to the point where the bar is be thrown backwards and then what seems to have been that a BSOD flew for a fraction of a second the power cut and the system restarted.  Restart Start Up Repair did not work (you cannot determine the problem).  Could not start safe mode, and when I went to all our restore points had mysteriously disappeared the system recovery.  I checked the material widely to find errors, and it doesn't seem to be a hardware problem.  Since at this stage would not worth the hassle to track down a Vista Home Premium disc to make a repair (which I'm not sure would work based on reading other forums) a Windows 7 upgrade would solve the problem?  If that won't accomplish anything, I at least would be able to rifle through the old partition and get my stuff is back with a fresh install of Windows 7 on a new partition?  What can I do, or I am the GROUND.  There are a lot of things on this computer and I would be sad to lose.  Unfortunately, we are a company household risky here and nobody listened to me when I said that we really need get an external hard drive to make a backup, so we don't have not one.  Help would be greatly appreciated.

  Hi Loveofsporks,

  You are able to start Windows now? If this isn't the case, follow the steps below.

  1 restart your computer and immediately press the F8 key until you reach the menu Advanced Boot Options.

  2. Select Disable automatic restart in the event of system failure

  3. restart the computer.

  4. After you receive the exact error message.

  For an upgrade to Windows 7, you must be able to boot into Vista. A clean install would solve your problem if it's related software. Regarding your data, try to connect the hard drive to another computer as a slave drive to see if you can recover your data. You can check in the recovery software from 3^rd party in option.

  * With the help of third party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error "the network card experiences driver or hardware problems" and "To ensure that your Internet protocol bindings are Correct" on Dell Inspiron 530

  Original title: 'make sure that your Internet protocol bindings are Correct (DELL Inspiron 530 Intel 82562V and Desltop)
  
  I'm doing tech support for the family and I'm stumped. They had a Dell 530 with an Intel 82562V-2 and is no longer connected to the internet.

  ipconfig/all statements

  Hostname...: wayne-PC
  Suffix main DNS...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  That's all. Windows gives errors two errors:

  (1) the card network knows of driver or hardware problems

  (2) check that your Internet Protocol connections are Correct

  I installed the latest Intel drivers and TCP IP settings are checked for V4 and V6. I even went as far to install a new Dynex Ethernet card that gets the same mistakes.

  I even tried the netsh reset ip and netsh winsock reset command. I have no idea what to do next. I searched glasses and found similar problems with the same model of Dell and card, but they have been fixed by rebooting.

  Hi MButIer,

  -How long have you had this problem?
  -Was any change in software because the computer before the show?

  Follow the steps mentioned below:

  Step 1:

  Temporarily disable the antivirus software (and any other security software) and the firewall on the computer as a test. Once disabled check if you can connect to the internet without any error.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: Make sure that you enable the antivirus software, other security and firewall programs.

  Warning

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

   

  Perform a System Restore to a point before the show and check if this solves the problem.

  See also:

  System Restore: frequently asked questions

  If the steps above do not help, the best would be to get in touch with the Internet Service Provider (ISP) for assistance.

  Hope this information helps.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows 7 hangs with the hardware problem, possibly video card

  We currently live hourly breaks down our Windows 7 ultimate (64 bit) desktop system.  Whenever Windows 7 restarts, it informs us that Windows 7 crashed because of a "hardware problem/question.
  We spent the last week using Memtest to test each individual memory stick (8 GB total RAM, 4 individual memory 2 GB sticks), as well as each of the individual memory on the motherboard slots.  Tests total were about 24-36 hours (not all at once, of course.)  Memtest found no errors.
  We are therefore now move to the video card.  Anyway is the same way and diagnostic test the video card (something similar to the test of memory)...?
  Sense, is there any software diagnostic tool that can be downloaded — like Memtest - to test its video card...?
  Thanks in advance for answers!
  * original title - card video problem *.

  Hello

  Utilities usually just video card testing their performance and General compatibility with Windows
  and the programs they are running. For the test that deals specifically with crash, BSOD and other
  questions, it would be best to contact the video card manufacturer support and check with their forums.

  Motherboard (and system manufacturers) also have troubleshooting utilities, if they will help you
  to access it.

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  Start - type in the box search-> auditor/Reset hit enter to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

  ------------------------------------------------

  Check this thread for J Stuart W response which has some utilities that might help.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/random-black-screen-on-Windows-startup/ac0e0e3d-C6A2-4c35-9a69-81cfc446831f

  ------------------------------------------------

  This, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  These utilities can read the Minidump and another error collection files if you need to see what
  in them there. If this BSOD report see the below troubleshooting tool and report those or other issues
  here for further troubleshooting assistance.

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP)

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ============================================================

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 answers.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can help with other errors you might find.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cannot open firefox, get cannot open XPCOM. Impossible to open IE. Cannot type anything in the address to Fiefox or IE line. What can I do?

  I ask this in the name of a friend. She has a Toshiba laptop, windows 7. It is not computer. She used her phone OK yesterday, playing a Facebook game (played several times before) and everything was OK.
  Today she when she tried to access Firefox got 'cannot open XPCOM.
  She can not open IE either.
  She cannot type anything in the line of address for Firefox or IE

  You will need to use another computer if your computer do not have access to the internet.
  You can download Firefox for it and save the file to a USB key.

  Try this:

  • Download the installer of Firefox and save the file to the desktop
    https://www.Mozilla.org/en-us/Firefox/all/

  Save the full Firefox installation program on a USB

• Diagnostic tool hardware problems on Satellite has detected memory

  Diagnostic tool memory detected in my laptop hardware problems. Now I don't know what part of the hardware's fault.

  Whenever I start my laptop after shoutting it down for some time, it appears failed early and repair takes place and start using the system restore that will come back at some point.

  Is that what this has to do anything with overheating?
  Please help me immediately

  > Diagnostic memory tool detected hardware problems in my laptop. Now I don't know what part of the hardware's fault.

  I would assume memory one or two failures of modules.
  I recommend you to check them both.

  Remove a module and try to use the laptop with a connected module.
  Then another module test. Make it as different memory locations.

  If two modules are corrupt, then you will need to replace both.

• Wireless - hardware problem?

  Hello world

  I have a laptop HP V3018CL. I have a wireless issue. I can not connect what either. But here's the weird part, I can't find my int Device Manager listed wireless card. I can't find in the Network Neighborhood properties. And the WiFi (in front of the laptop is sold red / (Orange)?) I'm not good with colors) (it was blue)

  I tried to re-install the drivers but without success. Can someone help me with this? What it means if the led is orange/red solid. And why can't find my device in the Device Manager? Thank you

  Sam.

  Message edited by SamNeddy on 02/11/2009 13:17

  Yesterday, I was chatting with HP support.
  
  It was the most frustrating conversation of my life. I told them exactly what I had done, the syptoms, everything and then the guy goes, we go just to install drivers. Even if I told them, it's a hardware problem, the orange light, the device, the update of the firmware Manager. All this fell on deaf years. It seemed that the guy knew nothing of the software support and read just via a script. arrrrggghhhhhhh! IT IS THE LAST TIME THAT I WILL EVEN INVEST IN A CV!
  
  so I just buy an adapter wifi for 30 dollars and call it a day!

• Satellite A200 reporting screens not correctable hardware problem blue

  My model Satellite A200 PSAFCA-01H00J is blue screening and reporting of a non correctable hardware problem. I disconnected all devices, including the mouse.

  All tests of memory and the device driver may report any problems. I unplugged and reinsert the two memory chips.

  There has been no hardware or changes to software other than Windows to auto update.

  This machine runs on Vista SP1. I dug the following message: Root cause found Bugcheck 124 unknown parameters 0x0, 0x95f7c3f0, 0xb2000040, 0 x 800. MSDN Info for this can be found at
  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557321.

  Anyone know where I should look for this hardware problem?

  If you remove the second module of RAM is still blue screen?

  I saw 0 x 00000124 on a similar laptop and it was a problem of CPU.

• MBPr 2013 - is this visual glitch a hardware problem?

  

  Is attached a screenshot of my App Store as it is currently. This kind of effect 'glitch' also sometimes appears on my desktop. Add to that, twice in the last two days, my computer crashed randomly when using Chrome.

  The only known issue with my laptop is currently a low capacity battery - nothing serious, but it is less than 80% of the capacity of origin so OS X recommends a maintenance.

  Could this glitching and crashing (crashing has only just begun) be an indication of a more serious hardware problem?

  Thank you.

  You need a new battery in... work for the Genius Bar in the units of the retina.  Since the display problem can be demonstrated, they can look there as well.

• Analog multichannel peculiar read problem with PCI-6014 - hardware problem

  Hi all

  I see some very special behaviors with a 6014 when I do a multi-channel analog playback.  I am revamping of existing code to a customer, which implies the passing of the traditional DAQ in the DAQmx.  Traditional DAQ does not use a system based on the tasks, my client was in the process of reading clocked by the software for only one channel at a time, depending on what signal was of interest to both.  (application is a series of tests on a control PCB who will interface with some hardware, checking the answers and tensions and others)

  When I rewrote the application using DAQmx, I created a single task that contains all of the analog inputs of the map (AI0:15).  When I am interested in a particular signal, I indexed the channel since the reading chart data.  The strings that contain the actual data are 0, 1, 3, 4, 5, 6, 7, 13, 14 and 15.  All channels are NRSE.

  One of the signals of interest lights AI7.

  When I connect the AI7 signal with an oscilloscope, I read 2.5V - which is exactly what I expect to see.

  When I read AI7 using MAX, I read 2.5V.

  When I read AI7 by itself using a single channel DAQmx reading (i.e. 1 Samp 1Chan or 1Chan N Samp), I read 2.5V.

  When I read AI7 simultaneously with all the channels that have a greater number of channel (i.e. AI8-15), I read 2.5V.

  When I read AI7 simultaneously with any channel that carries a lower channel number (i.e. AI0-6), I read 2.34V.

  ?????

  For example, if I read AI0:15, I read 2.34V on AI7.  If I read AI0:7, I read 2.34V.  If I read AI7:15, I read 2.5V.  If I read AI7:10, I read 2.5V.  If I read AI6:7, I read 2.34V.  And so on.  Any combination of playback channel which includes results AI0 AI1, AI2, AI3, AI4, AI5 or AI6 during a misreading on AI7.

  All channels read because they are supposed to, no matter what channel is included in the job.  AI7 is the only one that illustrates this behavior.

  I wrote code for the acquisition of data for 10 years now and I have never seen anything like this before. The behavior is consistent.  I am sure that it is a hardware problem with the Special Commission that I use.  That's the advice of my customer, I don't know when they bought it, but I think they have had for years.  I doubt that ever, it has been calibrated.

  I guess it's more I'm curious than anything else - what on earth would cause this behavior?

  I'll tell my client to replace the card, if really I just asked my own knowledge.

  
  

• Hardware problem potential keyboard T410

  Hi all

  Since yesterday I was faced with a problem with my T410, which is potentially due to

  a problem of material with the keyboard.

  A few specific keys don't work anymore. These seem to be the key to turning the power on, the Fn key.

  the Alt Gr key and the ThinkVantage button.

  I guess it's a hardware keyboard problem, since I can't use the Power On button for

  start the laptop. Fortunately, it is possible using the marketing of the fingerprint reader.

  When the laptop is running (using Windows 7) everything works fine, except the cited

  buttons. I can't access any functions of the keys (e.g., the reading light) Fn or Alt-Gr symbols (eg.

  the symbol that is on my keyboard press 2 @) or power down with the power button.

  I tried various easy fixes:

  * By ensuring all drivers are up-to-date

  * Remove and replace the keyboard

  * Static discharge procedure (unplug all power, 10 presses and holding of 30 sec of power button / stop)

  Check the Bios settings

  * Replace the battery

  * ...

  Unfortunately, it has not changed the situation.

  I wonder if the simultaneous malfunction of these specific buttons pointing to a certain

  hardware problem. I hope a replacement of the keyboard can solve this problem, but it could be a

  problem with the motherboard.

  Advice would be welcome.

  Thank you

  HD

  It's hard to say, it could be the motherboard (more unlikely). But more likely it is the keyboard that plays up. The keyboard is least expensive to test for specific problems that you mentioned in the T410, so it's the most cost-effective test for fault case.

• I have a Server R2 windows 2012 automatically switches out of his own for several times and it doesn't look like a hardware problem.

  I have a windows server R2 2012 which automatically switches out of his own for several times and it doesn't look like a hardware problem. and I have this problem every day.please tell me what is the reason

  Original title: r2 windows server 2012

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• ProBook 450 - second series of recovery media, blue screens windows 7 (win 8 okay, not the hardware problem)

  I had a new HP probook 450 G1.

  Immediately, I swapped the 750 GB for one SSD drive and tried to install Windows 7 from the recovery media. The operation has failed. Contact HP support, they sent new media.

  I used new media. Windows 7 operating system installed. As soon as I install the drivers, the PC goes in a loop of the blue screen.

  I can install the chipset drivers and wifi. Don't know what the other driver is causing the blue screen. I can also install from the windows media 8, so this isn't a hardware problem - wife hates just windows 8.

  Basically, please either give me a few troubleshooting steps or I'll go back to the PC. I'm NOT insterested in a manual process long to determine which driver is the problem and the recovery download media manually the drivers one... should work.

  After you have reinstalled the original 750 GB hard drive with the replacement media, I managed to an attempt to "recover". So, I decided to sit and try, by the process of elimination, all drivers.

  It turns out that the technology Intel Rapid Storage Technology driver was causing the problem. When I installed everything BUT that, the laptop works very well. Notice that I use a fairly new SSD Crucial of M500. It is quite possible there are other people out there see it. You really need to install the driver of rapid storage technology, it is fast enough - not not even 100% sure what good to give the driver.

  So I gave myself wrong guidance by the initial recovery of defective media. The second group of work recovery media, but the version of the driver intel 12.7.3.1001 does NOT work with the Crucial M500. I checked the Intel site for driver downloads, and it was not clear that they have a newer driver appropriate right now. Maybe someone else can tell?