WLAN does not work on Equium A210

I have an Equium A210 & for some reason he can't find WIRELESS networks. I have a bt home hub (2) installed & having to connect wire is a bit of a pain... I reinstalled the driver for my wlan card & still no joy...

Can anyone help?

Hello

you have everything by default? If I were you I would first set everything by default. Check if the WiFi network of your machine is without encryption and active (check to see if the wlan switch is on "ON" and if the Fn + F8 keycombination active wireless devices.)
Make sure that the HUB is turned on by default and then try to connect...

What wireless card is installed in your machine?

Welcome them

Tags: Toshiba

Similar Questions

  • Satellite L350D - WLAN does not work after the recovery disk

    Hello

    I just got a L350D. I ran the tool recovery disk, without any other program running. It is on a good way to end the second disc and that: BAM! blue screen. Since start-up, my LAN and WLAN does not work.

    He always says ' WLAN 2.0 bg adapter "to which no driver is found. The driver is a Realtek WLAN and LAN.

    Don't you think that the crash of the WLAN and LAN module fails?

    I tried the things:

    System reset
    Reinstalling the driver

    but nothing has worked.

    Someone at - it advice?

    Thank you very much!

    Mycale

    Hello!

    I put t know what is the reason for this BSOD when installing, but you can post the BSOD code? For example, you can search based on Microsoft Knowledge for this code.

    In addition, I would try to update the BIOS of your laptop that you can find on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    After you have updated the BIOS to try to update the WLAN and LAN card driver, or try to reinstall Windows using the Toshiba recovery disc.

    Good bye

  • Satellite L40 - 16 d and WXP - WLAN does not work

    After you install windows xp on my toshiba l40 - 16 d (psl48e) wifi does not work!

    maybey upgreate BIOS solve the problem?
    the problem is this model doesyn can't hawe no support on toshiba - I do not know I can download the new bios and soft to bios upgreate

    Anyone know?

    > bios maybey upgreate solve the problem?

    Update the BIOS?
    Why the BIOS updated so the WLan has worked properly with this version of BIOS before installing Win XP again?

    I think that you have not installed the right WLan driver.

    Satellite L40 - 16 d belongs to the series of PSL48.
    The drivers are available on the page of the Toshiba UE driver:
    http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?
    Note: You must select Archive first Optional product Type

    In addition, you can choose WLan driver: Realtek RTL8187B because the cell phone was equipped with such a WLan module.

  • Satellite C660-121 - WLAN does not work

    Hi all

    I have problem with Toshiba Satellite C660 - 121.

    I installed new windows, and now my wireless does not work. I downloaded all the drivers LAN, WLAN etc. and WLAN will not work, I put the internet cable in the laptop, but not by cable or WIFI internet connection: S

    Please can someone help?

    Edit: in the Device Manager, NETWORK CONTROLLER is not installed, but I can't find that anywhere and I can't find any Wi - Fi network!

    Which Windows version have you installed on your laptop satellite?

    At first check if the WLAN and LAN card card are installed and registered correctly in the Device Manager?
    If Yes, you must enable WLAN card by using the FN + F8 key combination. Can you do this?

  • Satellite L40-143 - WLAN does not work with the new router

    WLAN on my Satellite L40-143 does not work since I Modem Alice-1121.

    Who can help me, please!

    Hi kenny_21,

    If you have a new WLAN router you must change the configuration that I think

    The new router is visible under WLAN connections and can connect?

    If so try to connect. The standard router password can be found in the manual of it and no doubt, there will be new addresses MAC first before connect you. I put t know the exact configuration.

    Also check the options the WIRELESS card with TCP/IP. Usually, you need automatic IP addresses.

  • Re: Satellite L20-112 - WLan does not work after installing Win XP

    Hello

    I reinstalled Win XP on my old laptop, and all my drivers disappear.
    I downloaded all the drivers on the official website of Toshiba, and unfortunately the wifi does not work.

    My Notebook: satellite l20 - 112 psl2xe, win xp sp3, sticker for computer laptop-atheros WiFi-.

    Thank you in advance.

    Hello

    This means that you need a WLan driver or what do you exactly by wifi does not work?

    Do you know what WLan card you have exactly?
    You could install the hardware like Everest Home Edition diagnostic tool which would provide information on the WiFi chip.

    PS: Here are all of the WLan drivers:
    http://APS2.toshiba-tro.de/WLAN/

    Welcome them

  • HP DV600 WLAN does not work

    Hi, my Broadcom WLAN is not working. The blue led is now ambar.

    Put the on/off switch and not I have the answer for WLAN.

    Help! Thank you!

    Here is my response to another thread:

    I have a DV6000 with a Broadcom Wireless card that does not appear in the Device Manager. This laptop has been rated in respect of the extended warranty for this problem of known materials. Unfortunately the problem showed up a few months after the expiry of the extended warranty of two years. HP was no help to solve this problem free of charge. I think that HP should not set a deadline on known hardware issues. It is not a question of if, but when these known hardware issues will be will be.

    It seems that there is a problem with the BIOS chip backup settings or something to that effect. I'm not an expert in the BIOS, but I have found that if enter you the bios at each start and either restore the default settings or make a minor change to tell the time from the clock, then save and exit, after than the laptop boots the wireless card will work. However, after a stop and normal operation, the wireless card is missing again. To enter the bios and the backup every time you start to solve the problem... at least for me. I hope this helps.

    I hope this helps.

  • Satellite L750 - WLAN does not work after upgrade to Windows 10

    After the upgrade from Windows 7 to Windows 10, internet Wifi don't work do not. Unrecognized WiFi. Seems that the driver for the wifi does not work with windows 10. Any ideas please?

    Dear Jolgas,

    It seems that the problem of driver. You should installed driver WiFi for window 10.

    Thank you
    Solène

  • Touchpad does not work and Equium automatically restarts after a stop

    Something going wrong drasticaly yesterday. I wasn't doing anything elaborate, just work excel and I'm tired of the Tablet touch and 'connected' one infrared I smile sometimes use... it did not work too well, low battery level, I guess, so I returned to the touch pad... but the touchpad was now for some reason, doesn't work do not at all and did not since...

    Turning off the laptop and was my solution, but he has not corrected the situation... the infra-red mouse works very well but with new batteries... on top of that, now when I turn the laptop off, it stops but then automatically starts once again, when a microsoft message appears saying that the computer has recovered from a serious error.

    So since this episode, the touch pad does not work and the computer will stay off! And maybe it's me crazy, but some of the keys on the keyboard are more sensitive as they once were.

    It was a satellite, and bought only in early January.

    If anyone can help I would appreciate it a lot.

    Thank you

    Hello

    Sound very mysteriously. However, as in the first answer mentioned the function FN + F9 turn off and turn on the touchpad.
    I also recommend to check the Device Manager if all devices are working properly.
    If you find any errors, but the problem persists then the step of text should be the reinstallation of the operating system. In this case, please use the recovery CD.

    If the recovery procedure will not solve the problem, I guess there must be something wrong with the hardware and the ASP help is needed. Guys could start diagnostic tests and can locate the fault.

  • "A" key does not work on Equium A60

    Hello

    I bought my Equium A60 for more than a year.

    I cleaned the keyboard about a month ago and now my key will not work properly!

    I had jumped off the top plastic part off and blew out the dirt and the thing below rubber came out! It normally covers the sensor, it a little attached to it and presses down on it, so that's what makes the letter arrived on the screen! I put on top of the sensor and covered with plastic bits, but it won't work unless I press and press about 60 times! This is not very practical when you try to type fast!

    Could someone help me please! I don't know what to do.

    And A is that you use a lot, so I can't avoid it!
    Its only the key has, so I don't really want to buy a whole new keyboard, although I would do it as a last resort a little to solve this problem. But even in this case, the rubber part does not come with keyboards? !! I would have thought that isn't that high woth plastic letters on? Will it get a technician, paste it on?

    Help, please!

    Thanks in advance...

    Nicola
    x

    Post edited by: nmssxty

    Hi nicola,.

    I can't give you precisely answer how to solve your problem.
    It seems that you will need a full keyboard.
    As far as I know it is possible to also buy only the key caps, but I do not think that a replacement of the key CAP will help you.
    In my opinion, you should ask the Toshiba service partner in your country. Maybe the technician may be able to deal with this issue without replacement of keyboard.
    If this isn't the case, then I guess you need a new keyboard. Don't be afraid, that's not very expensive.
    But as I said at the beginning to seek advice before you buy and replace something.

  • Audio driver does not work on Equium A100 (PSAAB)

    Hello

    I bought my laptop a few weeks ago, tried Vista on it for about 2 weeks but decided to change the operating system to my old XP because I did not like that Vista has taken to much power. (Like playing a game from time to time)

    Anyway, the installation went well and I checked the installation instructions on the home page of Toshibas and installed everything that was needed. I also installed the audio driver.

    After the restart there is no sound so I started, I was wondering what could be wrong. Called support and he told me to install 'Virtual Sound. The problem when I install was that I get an error message telling me that my computer do not support virtual sound.

    So my question is: is this the problem? Not getting is not the virtual sound installed or should it works even without virtual sound? It gets boring without sound and I want it to work. Anyone got any ideas what to do?

    Each suggestion or help is very appreciated!
    / Martin

    Hello

    I wonder why some of the support line suggested to install the virtual sound?
    The European driver Toshiba page does not include any virtual sound utility for this laptop Equium A100 PSAAB!
    In my opinion it of not good. You n t need to install this utility.

    I checked the Toshiba page and choose your notebook series PSAAB. I found a lot of XP drivers!
    There are also 2 different audio drivers; 5.10.0.5200 Realtek and Realtek 5.10.0.5253.
    Check both!

    I see that the reference page offers different upgrades of MS QFEs. You must install all!
    Sometimes these update of MS are important and necessary to solve some problems.

    PS; Please install all the drivers in the order mentioned in the Installation Instructions

  • Tecra S3 - Wlan does not work after installing Win XP

    Hi all

    I recently bought a Tecra S3 PTS30E-0TL059GH without an operating system.
    I installed WIndows XP Professional.

    Everything works, except for the wireless LAN. I can turn on, but it doesn't seem to find the correct drivers.
    Device Manager indicates problems with the networkcontroller and two other unknown devices.

    I installed all the drivers on the toshiba site, but it still doesn't work.

    Any help is appreciated!

    Thank you!

    Hello

    I think that the laptop supports the INTEL 802.11 B/G WLan card, but I'm not 100% sure on this subject...

    In my opinion, you should try to identify the WLan module.
    How to do this?
    In this case, the use of the PCI database should be very useful.

    More details here:
    [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]

    Knowing the exact specifications of WLan, is not a big deal to get the right driver.

  • Satellite Pro M30 - WLan does not work

    My Satellite Pro M30 laptop is about 5 years old and is a refurb. Until yesterday, my wireless connection was very good. Although my wireless connection is running with high speed and it is connected, I now cant get on the internet without using the ethernet cable.

    It is certainly a problem with the laptop itself.
    A framework has changed (perhaps with a function key?) or the internel wireless card packed.

    Can anyone suggest anything I can try with the laptop first before you buy an external wireless card?

    Thank you.

    I don't think there is that you can do.

    The wireless network card appears correctly in Device Manager.
    Make sure that the wireless network card is enabled correctly (FN + F8).
    There may be a problem with the WLAN antenna. Who knows?

    Anyway, if you can't get this to work once again use small USB WLAN adapter and be happy.
    To be honest, is not bad idea because new USB WLAN glue can work with G WLAN or even N. The original WLAN card in your notebook is, I guess, old A/b.

    Good bye

  • Satellite P300 - 19 p - WLan does not work

    Hi all

    I recently bought a Satellite P300 - 19 p and at home I had a connection to the LAN cable to go online but 2 days after purchase I flew to Africa for a year and now when I try to connect to the Internet wirelessly, I discover that the bleeding thing doesn't have a working wireless driver.

    I am really disappointed and frustrated, I installed drivers before and the Toshiba driver on drive C file shows a driver by Atheros wireless and I installed it but it will not appear on the Device Manager.
    I copied a driver realtek on a disk and loaded, it appeared on the Device Manager but wouldn't work, came up with the code 10 error?

    When I turn on wifi radar it keeps saying "the wireless network device is disabled. Please activate"- large just give me an idea how to!

    I can't connect my laptop to the internet and it smells just a waste of money and be out here is not anywhere I can take it to!

    Can someone offer help and why not the manual provided with the help of these things!

    Thanks in advance!

    > When I turn on wifi radar it keeps saying "the wireless network device is disabled. Please activate"- large just give me an idea how to!

    I think that this problem of WLan is not related to the missing driver, but on the fact that your WLan is not enabled!

    Then all first move the WLan switch on IT and then use the FN + F8 key combination to select the WiFi network!

    By the way; isn't your Atheros or Realtek but INTEL WLan card wireless network card!
    The driver can be found here:
    http://APS2.toshiba-tro.de/WLAN/-> Intel PRO/Wireless 3945/4965/5100/5300

  • Satellite L50-B-166 - WLan does not work under Slackware

    Hello

    I installed a copy of Slackware 14.1 on my new Toshiba Satellite L50-B-166, but when I start it up, the wireless interface does not appear, even launching ifconfig - a.

    I installed the iwlwifi driver but without result.
    Can anyone help?

    Thank you

    Hello

    Could you please put the output of the following commands:

    lsusb
    lspci

    BR

    Tom

Maybe you are looking for