Another device is using my IP address

Similar Questions

• I have a message on my computer that another computer is using my IP address

  I have a message on my computer that another computer is using my IP address! I want to know what I can do to stop this and how is what is happening without knowing me? I seriously need help.

  Nickay

  Hello

  . You use a wired connection or wireless?

  An IP address conflict occurs when two computers on a LAN (local area network) or the Internet were assigned to the same IP.

  I suggest you to consult the following link to stop the IP conflict problem.

  Get help with the message "There is an IP address conflict":

  http://Windows.Microsoft.com/is-is/Windows7/get-help-with-there-is-an-IP-address-conflict-message

  I hope this helps.

• Do I need to install Adobe acrobat DC or cloud in another device to use Adobe Acrobat DC?

  Hi, I have a my subscription to Adobe Acrobat Dc machine but I want to install it in another laptop, I could install directly or do I have to install the cloud as well?

  Hi mariap2504384 ,

  You have a standalone subscription for Acrobat DC or is a part of the application of CC?

  You can install Acrobat DC directly on your laptop. There is no compulsion to install creative cloud, but I would like to inform you that you can install on 2 computers, but you would be able to work only on one at a time.

  Let us know if you need additional assistance.

  Concerning

  Sarojini

• Someone else is using my IP address? Help!

  Hello

  My wifi starts to turn and goes out several times per day. When I hit 'open network preferences', he says that another device is using my IP address. I turned the router and turns off again several times, but it's always the case. How to make this stop?

  You may need to change your router password wireless and while there, see

  What are the settings in the browser and all other components of your online access...

  What did you do in this regard so far?

• That means "another device on the network use the IP address of your computer"?, that means "another device on the network is using the IP address of your computer?

  That means "another device on the network use the IP address of your computer"?, that means "another device on the network is using the IP address of your computer?

  A

  Most likely, the computer becomes a network address of a router. The assignment of an address ("lease") expires and must be renewed after a certain period of time, which could be an hour or a day. The lease expired without being renewed because the device has been disconnected at the time. Meanwhile, the address has been leased to another device on the network, or maybe the router has not updated its list of addresses the leases. When the device offline comes back online, a conflict results. Depending on the type of router you have, the conflict can resolve itself automatically. If not, then in the menu bar, select please

  ▹ System Preferences network ▹ 

  If the preferences window is locked, click the lock icon in the lower left corner and enter your password to unlock it. Click the Advanced button, and then select the TCP/IP tab in the sheet that drops down. Look at the menu option

  Configure IPv4

  If the selection in this menu is

  Using DHCP

  Click on the button

  Renew the DHCP lease

  Test.

  Make sure that you have more than one DHCP server on the network. That could happen if you have more than one access point Wi - Fi, or if you have a router and broadband a wide device distinct in connection mode sharing.

  B

  Less likely, you have a network address that you assigned yourself and another device is itself by assigning the same address. In this case, the selection to configure IPv4 menu will be either manually or using DHCP with manual address. This kind of conflict will not be resolved automatically. You have the following options to solve:

  1. Change the selection in menu using DHCP.
  2. Change the address assigned manually to one that is not used by another device.
  3. Change the address of the other device.

  Which of these options you choose depends on the details of why you use a static IP address. Any changes you make to the network settings is necessary before taking effect. To do this, click OK, and then click apply.

  If the router is also your device at wide band, then he may be operating in bridged mode. In this case, only one customer at a time will be able to connect to the Internet. Consult the manufacturer or ISP documentation for how to reconfigure the device in the connection mode sharing.

  C

  According to a report a "DirectTV" receiver can cause the problem. If necessary, disconnect the device from the network, or power off and test. Consult the support services provider.

• How to make a call using the ip address

  Hello! I'm very new to telepresence system and wanted to know about calls of one endpoint (Te MX300) to another (Fe SX20) using their IP addresses (public or private). I saw in the configuration guide they make calls through IDs or URIS, and they need to guard/SIP proxy for that, but how can we establish the connection through their ip addresses without additional devices, of the right endpoints?

  Thank you

  Hi Zhomart,

  I assume you want to directly (without using the gatekeeper) call the other end points using the IP addresses.

  It's very simple.

  Use the remote control and punch in the IP address that you want to dial, make sure you only select as a H323 Protocol.

  The composed IP address should also be accessible.

  Kind regards
  Sagar

• "Another device on the network use my ip address".

  I tried to check my mail and could not and got this message "another device on the network use the IP address of your computer." I have never seen it before. He also said that I could change the IP address, if I continued to have problems. I bought this iMac and used Migration to transfer all the stuff from my old iMac that is still used. That was months ago, but I never had this message up to now. So should I change one of the IP addresses? And if so, how is that done?

  http://osxdaily.com/2010/09/19/another-device-on-the-network-is-using-your-Compu ters-ip-address.

• Make error at startup on another device using my IP address

  The last 2 weeks, I get this error message when I start up my Power Mac, "another device on the network use the IP address of your computer."  When I go to the network window in system preferences says Ethernet is connected, but all DCHP info is empty.  I never got this message before and even if I can use this computer using wifi, I prefer the wired connection.  How can I correct this situation?

  Thank you!

  Is something on the network using IP static?

• How can I fix the problem when another computer is using the same IP address with me?

  My computer has proven to me that there is another computer using my IP address.

  He said I need to contact the administrator.
  I don't know how to do in this regard. Help, please.

  Since it's your own home network, it means you are the network administrator. Which basically means that you should have total control on who can and can not connect to internet through this network.

  Then, you should have a router somewhere in your House. This is the device that sends the wireless signal. Most likely, it will be connected to a phone jack or cable from the wall, or a modem, depending on which company you get your internet service.

  You need to find this device, the router and restart for it. Do the same on your computer. Once both have restarted, try to connect to the internet. The router must have an ID written somewhere on it. This same ID should appear in your network and sharing Center , if you click on "Connect To A Network.

  The homegroup is something a little different. A homegroup is really just a collection of your own computers, or in your home. For example, if you had a desktop and a laptop, and I wanted to share the files from one to the other, you should join them in the same homegroup. It has nothing to do with putting on the Internet, just the connection of two computers together. It of good that you set up a homegroup with a password, but won't really help you here.

• You don't you email / account that Roadrunner mail is used by another device?

  While reading my email yesterday a gray box appears on the screen that says "cannot get mail / Roadrunner Mail account is in use on another device, then a pop up says your software must be updated to 9.3.4... so, I press the button install... it starts to update... the thing is that I don't date my iOS to 9.3.4 the day of the update is out. I think it is 08/08/16...

  the update finished I read my email and I get page to configure an e-mail account, I'm looking for my roadrunner acct and he went...

  Today, I get the ipad3, I have time to work on the problem now... to my amazement my roadrunner e-mail account is back, rated and work.

  Everyone thinks I should be concerned about this chain of events... I'm always worried about hackers, any help appreciated. Thank you

  Sounds more like a messed up iOS upgrade than someone hacking into your device.

• e-mail unavailable because "in use on another device?

  Once in a while I get a message on my iPhone 6 which I can not send because my my "account is used on another device. I use apple mail. The ides what it is?

  Thank you

  The server wishes to inform you that an another e-mail client POP3 is currently connected. POP3 does not supports multiple simultaneous connections.

• Someone uses another SMTP relay and then using my email address to send spam.

  Someone uses another SMTP relay and then using my email address to send spam. They have no access to my hotmail otherwise I see on sent items. I can see the SMTP server on the header. What should do?

  They send SPAM to some of my contacts.

  Someone uses another SMTP relay and then using my email address to send spam. They have no access to my hotmail otherwise I see on sent items. I can see the SMTP server on the header. What should do?

  They send SPAM to some of my contacts.

  Not a question for the forum of Virus and malware/scanning software and removal of threats.

  A moderator will move your post to the Forum Microsoft Account, Hotmail, Skydrive.

  http://ask-Leo.com/my_contact_list_is_getting_spam_from_me_what_do_i_do.html

• Message appear conflict of IP address at startup. Another computer already uses the network with the same IP address. How do I cure this?

  When my kids play online on the X - Box I get an error message on my laptop when I start after them. It is said there is an IP address conflict and that another device is already on the network with the same IP address. It does not affect me access internet even if. How can I fix thi.

  Hello

  1. which is the version of Windows installed on the computer? For example, Windows 7, Vista

  2. only the error message appears only when the Xbox is connected to the computer or at both times?

  3. have you made any software or changes to the material on the computer before this problem?

  Please answer these questions and provide additional information so that we can better guide you.

• My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam. Skype device code 43 usb video.

  My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam.

  Also got the guests when using Skype as a video device usb was not detected and that it is a code 43.

  Have tried several way sto resolve this problem. CyberLink YouCam HP's running came preloaded on the laptop. The webcam is running when this program is being used separately.

  Inappropriate Feedback Forum of Windows hardware and drivers Forum.

  My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam.

  Also got the guests when using Skype as a video device usb was not detected and that it is a code 43.

  Have tried several way sto resolve this problem. CyberLink YouCam HP's running came preloaded on the laptop. The webcam is running when this program is being used separately.

  Inappropriate Feedback Forum of Windows hardware and drivers Forum.

  Hello, Aadi467,

  A device driver has notified the operating system that the device failed.

  Run the diagnostic tool of hardware devices do not work or are not detected in Windows on the Microsoft Fix it Center.

  You can also uninstall the software from Cyberlink.  There is a found here download link to reinstall the software after restarting the computer.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/lost-my-CyberLink-and-UCAM/TD-p/760367

• "The port is used by another device. Printer does not print.

  I have a printer Canon D661 on an Ispiron Dell s 545 under Win XP SP3.  Everything worked fine until today when he leaves the impression.  I have uninstalled/reinstalled the printer through Windows and through the uninstalling Canon.

  I have downloaded the latest drivers from Canon, did all my XP, updates my Dell updates driver material and restarted several times than I can count in the process.

  I've stopped and started the print spooler.

  Still nothing will print.  The printer status window insists that "the port is used by another device.

  I ran impression of Microsoft Diagnostic tool, he says that's all right.

  It is a USB port, as the mouse and keyboard.  Nothing else.  I tried swapping USB ports between elements, no help.

  The printer works fine if I plug it into my USB netbook, so it's not the printer.

  I receive the error message even if the printer is connected to the office he "belongs" to.

  Until yesterday it worked fine, same print network jobs on other computers.

  I went home from 11:00 to 18:30 today.  Help?

  Thanks for the reply!

  I tried what you suggested, but it did not work.

  Finally, I got it going.  For some reason even if it was still installed on LPT1 on that question and two other computers, this computer has stopped working.

  I found the installer was not obvious choice to install on USB1 and that was when he started working.

  Interestingly, it works installed on LPT1 on two laptop computers when it is connected in fact on their USB ports.

  Thanks again.