WLC L3 roaming - step by step guide

Similar Questions

• is there a step by step guide for Mozilla protection if my 5 year old daughter click on something that could be dangerous for her?

  I need to set up a login for my older daughter of 5 years on our computer, so she only has access to Mozilla, and once on Mozilla that she cannot access inappropriate Web sites. Is there a step by step guide for someone who has never done this before?

  My operating system is Windows 7

  Thank you very much for you help and guidance.

  Respectfully,.

  Derek Mr. Bond

  Hello Derek,
  I understand that you're concerned about your daughter and there is certainly a way to solve this problem.

  1) http://www.qustodio.com/
  This is a free parental control software that offers what you need

  (2) otherwise, you can also try this one: http://www1.k9webprotection.com/

  Best regards, G-Cloud.

• NB 100 and Windows 7, looking for drivers and step by step guide

  Hello everyone,

  IM thinking about to install Windows7 on my nb 100. But I have a question.

  1. How can I install the dvd version of windows 7 on my nb 100. This Microsoft tool is the right one?
  http://store.Microsoft.com/help/ISO-tool

  2. the Windows Recovery Cd will work, after I format the nb 100?

  3. where can I download the NB100 Windows 7 drivers?

  4. is there perhaps a step & step guide how to install windows 7 on nb 100?

  I would be grateful if you could help me

  Marco

  Hello

  (1) you can install Windows 7 using a Win 7 DVD or you can get an ISO file (image) and could create a bootable DVD or a USB bootable flash drive.
  The NB100 does not use an internal DVD drive. So if you do not want to install Win 7 from DVD then you have to buy an external USB CD/DVD drive. But you can also create a bootable USB key and might install Win 7 of this external USB.

  (2) Yes, it will work. The recovery disk to put the laptop in the same State as on the first day of purchase.

  (3) I think NB100 was created not for Win 7 because it is a netbook.
  Win 7 wouldn't go quite fast, of course, you could install it but the Win 7 needs a lot of material power and remedies like Vista and I guess NB100 is not supported these features powerful CPU or GPU.

  (4) I doubt that this teaching exists. I mean that the Win 7 drivers are not available for NB100. So, how to do an installation guide without no Win 7 drivers? But as mentioned above; You can install it by using the external drive. Win 7 drivers must be collected at your own hand.

• step by step guide to download from a DVD on USB

  step by step guide to download from a DVD on USB

  Hello

   
  You can try the following steps
   
  1. Insert your data DVD in a DVD player. Note: DVD must be a DVD-R or DVD - RW that was created for the storage of files. Cannot copy DVDs manufactured in series with videos or software on them.
  2. open the contents of the DVD by going to the 'Computer' utility and then double-clicking on the DVD. You should see all the data files
   
  3. connect your USB to the computer, and then open it in the same way that you opened your data DVD in the previous step.
   
  4. place the USB window and the disc data side by side. Then highlight the files that you want to copy by left-clicking with your mouse and then dragging the marquee on the icons of file you want.
   
  5 drag the icons highlighted in the window of data DVD to the USB drive window. A box appears stating that a file transfer is in progress. Once this window disappears, the file transfer is complete, and you can disconnect your USB and remove the DVD data disc tray.
   
  You can also try copying the data from the DVD, and then transfer to the USB key.

• Can someone help me with a step by step guide to add a "clickTAG" button on board animate? I looked everywhere online and can't seem to find anything, thank you.

  Can someone help me with a step by step guide to add a "clickTAG" button on board animate? I looked everywhere online and can't seem to find anything, thank you.

  Here.

  Re: Admins we can get an ad platform-specific sticky for banners of edge?

• Is there a step by step guide to transfer licenses?

  I have a PC that started getting the following message: "windows has detected a hard disk problem. " ‘ Backup your files immediately to prevent the loss of information and then communicate with the production of the computer to determine if you need to repair or replace the disk. " It is very I need a new hard drive and if it is sent to the manufacturer it will have to be re define probably provided the factory." I think I can lose some settings in the registry, etc.
  
  Since the purchase of the PC, I bought Adobe Design Premium, so if I end up with a new hard drive or even a new PC - how can I make sure that I can transfer the software without affecting the permit? Some discussions have conflicting info on disable or deactivate do not first - I would really appreciate a simple step by step guide - would be a good thing if Adobe could issue a permit too!

  Thank you very much in anticipation
  

  Help--> Deactivate in any of these applications now, then just instal software ogical on the new machine. If activation does not work, contact support to reset on the server side. Nothing is more necessary.

  Mylenium

• Step by step Guide V27 DPS and Apple site

  I try to make a Distribution certificaat for the download of a folio.

  I downloaded DPS Guide step by step and see that the latter is V27.

  On page 22 of the guide, step 4, I have to select the option App Store spécial.

  But when I go on the site of the Developers Apple I see the following opties:

  

  Which should I choose?

  You have already created the distribution certificate? If so, you don't need to (and can not) create a second.

• Delete the Page step by step guided assessment

  Hi all

  I would like to know how to remove the startup evaluation guided step by step page.

  The collector and the dashboard have been synchronize and running successfully for two days.

  From the home page, I click on this company and am directed to the page step by step .

  Other assessments of company on my Home Page take me directly to the Enterprise Dashboard Page. Thanks to all - Jeff

  If you get the wizard, you run a CE CA vs.

  The estimate using the wizard and the evaluation of the Enterprise Dashboard.  Capacity planner companies can be changed to a CE to a CA and back, via the dashboard.  Once you are connected to the Optimize.VMware.com, open the evaluation of THIS existing for the ID of the company you want to change, do the following:

  -Click on the ' step 1: set up "tab

  -Under other tasks, click 'change the evaluation information.

  -Change the Type of assessment to "[O] CA assessment."

  -Click on finish

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• I need a step by step guide on how to configure a network printer.

  Original title: I've removed a printer from my laptop which is shared with another PC in my house, how do I add the printer to the laptop, step by step, please, I'm so confused and frustrated at this point

  Adding printer

  I've removed a printer from my laptop which is shared with another PC in my house, how do I add the printer to the laptop step by step please...

  Hi AnnetteCarriere,

  What is the brand and model of your printer?

  You can follow this link & check if it helps:

  Install a printer on a home network

  
  Reference: Add a printer attached directly to the network

  Hope the helps of information.
  Please post back and we do know.

• help with adobe digital Editions professional step-by-step guide of

  Hello can you please give me a link for the step by step for proffesional edition, im goiing to buy the license and I Ant to know more about how to publish several folios for apple and android app

  Thank you

  Our list of learning resources at the links: http://forums.adobe.com/thread/994742

  Neil

• step by step guide to disable function keys F1 etc Windows 7 ultimate so that I can work with the FTW Transcriber to transcribe software. Thank you

  I want to disable the function keys of windows 7 because I want to work with hotkeys TRANSCRIBER, FTW software. You can guide me please. Thank you very much for your quick response.

  Hi Kripananda,

  What is the brand and model of the computer?

  The function keys are controlled by the manufacturer of the system. The changes must be made in the BIOS (Basic Input Output System). I suggest you to contact the manufacturer of the system to better support.

  Note: changes to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Step by step guide for management of the Persona

  Hi, I know, there are a few docs VMware 'official' on the management of Persona, but I was wondering if anyone has advice or links to the best way to set up the management of the Persona?

  Hello

  Check the following information http://www.vmware.com/files/pdf/view/VMware-View-Persona-Management-Deployment-Guide.pdf

  Hope this information helps you.

  __________________
  Im a nobody... Nobodys perfect... Therefore IM PERFECT!

• Step by step guide for custom legends

  Hello

  Does anyone know of a good guide to create captions for Captivate (using the V6)... If they need to be made in Photoshop or Flash, & tips on the best tool for the job... ?

  Cheeres

  Sabine

  Hi Sabine,.

  Perhaps I could find such a guide, but do you really need them since you are on 6? I've never use custom legends, replace them with Forms. There is so much easier to create, you have all kinds of possible control, on line, fills in the form of the characters, paragraphs, filling and you can move the "point" to the legends of the legend.  I always found so hard to create ancient legends and so strict rules. No need to Flash, a graphical editor is sufficiient but you must create different graphs 5 (without and with the points in the four directions), and each graph to set a CMF file for the padding. In the time it takes to create such a legend you can get at least 10 much better search forms (and save their style in the Style of the object manager for use).

  Sorry, this isn't a good answer to your question at all. I want to tell you that I have never created a custom legend after forms appeared in Captivate 6. Even for buttons custom...

  Lilybiri

• Can not activate app in DPS - process not as a step by step guide

  Hi I bought Indesign app unique edition and is thus a member creative cloud. I followed http://help.adobe.com/en_US/ppcompdoc/Step_by_step_guide_to_dps_se.pdf but I am not satisfied with the screenshots in the document.

  When I create an application to indesign, I would see this:

  

  But I get this;

  

  1 then I connect to https://digitalpublishing.acrobat.com/app.html#x=dashboard

  2. choose the Folio producer and export the folio

  3 then back to DPS download folio before I can continue to DPS

  4. when the trial did I get this where I App Active

  

  

  But since I am a member of cloud creative and indesign bought and downloaded online, I don't have a serial nr. can someone help me?

  Cordially Caspar

  You should only use the Create App Folio Builder Panel menu, as described in the document that you have linked to. The screenshot is displayed incorrectly in the document, but you see a correct flow. Your second image is the right thing to do.

  Do not sign in folio producer and export not folio. That is not the flow creative cloud and won't work for you.

  Neil

• Need a guide step by step installation of Cisco ISE in distributed environment.

  Hi friends,

  If anyone has the step by step guide installation for Cisco ISE in distributed environment please shere!

  I have the Cisco user guide, but does someone have created at the time of the actual installation.

  Thank you

  Sachin

  There's a trustsec 2.1 how to guide on the cisco Web site. There's also a 2.0 TrustSec ISE Guide flow that includes instructions step by step for the establishment of ISE 1.0.4. Which is still pretty accurate for the 1.1.1 guide. But if you go through the site should give you all the information you need.

  http://www.Cisco.com/en/us/solutions/ns340/ns414/ns742/ns744/landing_DesignZone_TrustSec.html