WLS set at deployment time configuration

Similar Questions

• Problems to change my url endpoint data control for Web Service design time vs deploy times. Where is the url of time to deploy the "deployment configuration" stored?

  https://blogs.Oracle.com/ADF/entry/changing_endpoint_url_for_a_web_service_data_control

  Using this link as a reference, I created a data control Web Service, and when I deploy via JDeveloper for different environments I can change my point of endpoint accordingly on this screen:

  

  However when I change my point of termination at the design time, the changes do not appear in the screen "Configuration of the deployment. This would not normally be a problem, but our automated deployment (maven/ant) seems to keep picking up the url "Deployment Configuration" instead of what we change in the DataControl.dcx. So I have a few questions:

  1. Why is there a difference between what we have in the source code and what is shown on this ""Deployment Configuration "screen for manual deployment of JDeveloper? "

  2. where is this "Deployment Configuration" end point url located? I can change it during an automated deployment as I can on a manual deployment?

  3. What is the best practice to change a url endpoint to the Web Service data control with during an automated deployment?

  It turns out that the connections.xml had the url of the endpoint that the profile of the deployment and jdeveloper was referencing at deployment time.

  In order to get our automated generation work, we use a search and replace of Ant utility to change endpoint in this connections.xml before construction/deployment of the application.

• I want to set how much time they spend on the computer not when. How do I do that? There was a tab, but it didn't.

  I don't see the screen of curfew, I want to set the number of hours that they can use on a daily basis.

  Hi SamenaBrinkman,

  Deadlines for Windows 7 can only set curfew for a configuration of the user as a child under the Family Safety. You are probably referring to the allocation of time; feature that can define how many hours a certain user can consume in a day. Allocation of time is only available on Windows 8. You can check the link below about a few changes on the time of parental control.

  Time does not

  Thank you!

• Is it safe to remove files from my macbook air now that I have set up my time capsule and backed up with time machine? My boot drive is full. How can I access files of my time capsule once they are deleted from my computer?

  Is it safe to remove files from my macbook air now that I have set up my time capsule and backed up with time machine? My boot drive is full. How can I access files of my time capsule once they are deleted from my computer?

  1 n ° put them on a regular external drive and the value of Time Machine to back up as well; the files you want to keep should be at least two disks in case one of them goes down.

  2. they will not be usable until the restoration.

  (140480)

• How to set the start time of QuickTime movie in AppleScript?

  I've been tasked with finding a way to play videos to QuickTime in full screen at a specific time.

  It seems that I have to use AppleScript, which I've never used it before.  I wrote this, that does everything, but from the beginning of time says:

  Tell application "QuickTime Player"

  Open the file "Macintosh Users:...: video56.mp4.

  present the document before

  play

  tell the end

  I found the dictionary AppleScript of QT (1. Open the Script Editor. 2. Choose file > open dictionary. 3. Select the reader QuickTime Player.) and think I want to use the document, currently.

  Where I'm stuck, but I can't understand how to use the document command.  All other orders that I used (open game) end in a 'v' and the document ends with a 'n', which is probably relevant.  How, I have no idea.

  Thanks in advance for any help!

  El Capitan 10.11.3 OSX

  21.5 "iMac late 2009

  QT worm 10.4 (855)

  Hello

  The script must set the current time property of the document, like this

  ------------

  Tell application "QuickTime Player"

  set tDoc to open the file "Macintosh Users:...: video56.mp4.

  tDoc said

  at the time current 36 - the start time of the movie (in seconds).

  present

  play

  tell the end

  tell the end

  -----------

  Shortman43 wrote:

  I found the dictionary AppleScript of QT (1. Open the Script Editor. 2. Choose file > open dictionary. 3. Select the reader QuickTime Player.) and think I want to use the document, currently.

  Where I'm stuck, but I can't understand how to use the document command.  All other orders that I used (open game) end in a 'v' and the document ends with a 'n', which is probably relevant.  How, I have no idea.

  The v designates a file object.

  And the n is a document object.

  Examples:

  read the document 1

  document before playing

  read the document 2

  play tDoc - the tDoc variable contains a document object

  or with a block of tell

  tDoc said

  play

  tell the end

  tell document before

  play

  tell the end

• ATV 4 cannot set date and time

  During Setup wi fi passes accepted. Activation of start and the message is - impossible to contact Apple support set Date and time.

  It is not correctly connected to your network

  Make sure that DNS is set to automatic (network - general - settings)

  Try Ethernet

  Make sure that the router has port 123 open (refer to the manual if in doubt)

• How can I enter BIOS compaq610 screen and set the date, time

  How can I enter BIOS compaq610 screen and set the date, time

  Hello

  See Page 94 or Page 100 (according to what's relevant) of your & Maintenance Guide.

  Kind regards

  DP - K

• Setting Date and time HP 7610

  I cannot set the Date & time by using the printer HP printer Assistant homepage > settings > preferences > Date & time.  When I put the date in the calendar and update time, it returns an error "invalid entry" message X.   What else can I try?

  No, it's the new title IE 11 has... so you have two options.  Use a different browser, or you can open the integrated Web server and click on the top right you will see a gear on it and select compatibility settings and add the SAP address (should be there by default), you will then be able to save your settings in the SAP... Let me know if it works for you.

• I want to set the "latency time" on my map its Reltec to stop the delay on my lunch. Anyone know how I can do? Apparently I need to make it lower than 512 samples.

  I use a laptop Advent 9215 with a Reltec High Definition Audio Card Windows Vista

  Hello

  Available in media player option is to change the playback speed.

  Change playback speed in Windows Media Player: http://windows.microsoft.com/en-US/windows7/Change-playback-speed-in-Windows-Media-Player

  You can also check with Realtek to see if there are options in the sound card's control panel to set the latency time.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Depending on your mode, I loaded down and insatalled and executed. But he doesn't not started and signed "check internet connection and time setting". Internet and the setting of the time are correct.

  Depending on your mode, I loaded down and insatalled and executed. But he doesn't not started and signed "check internet connection and time setting". Internet and the setting of the time are correct.

  Please let me know how to start.

  Please try to follow: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Deploy and configure Agent 12 c has failed

  Hi all
  
  We are trying to install 12 management agent using the method to push the current WHO 11.1 agent
  so far, we have applied the patch to upgrade console pre and don't have not upgraded to 12 c SGD again.
  We use 1 uproach system upgrade. and use the push agent of our current 11g SGD method to deploy and configure the agent of 12 c.
  I'm confused with the user name and password in the credentials section root, we do not have password oracle as we use power broker. and we either root password.
  When I try to run the task, it fails
  I asked the unix guy to help out me, they said that they can not install sudo as we don't use it.
  Please help am I missing something here.
  
  on the other hand, I installed the agent 12 c on 5 hosts of the 59 that we have since I got the root password it went smoothly.
  
  Thank you
  SJ

  Youe query is not clear to me. 12 c agent is not supported with EM 11 g SGD.

  When you use 1 system upgrade, you must use the pre-upgrade console to deploy agents and go through the process of upgrading the agent. In this console pre-upgrade, born to provide to the agent you install user to install the agent 12 c and switch.

  If this installation agent user has no root privilliges or if you have any credentials to the root, and then enter the credentials for the agent. In this case, the root.sh script is not run, but the deployment is successful. Make sure that you run this script after deployment of the Management Agent, before manually to use the new Enterprise Manager 12 c cloud control system. Otherwise, you will not be able to perform tasks on the Management Agent. If the root.sh script is not executed, passage of the Management Agent is not affected.

  Oracle 12 c, the existing connectivity between the former Agent of management and WHO is used to deploy and configure the Management Agent; SSH is not used.

  Refer to the upgrade guide:
  http://docs.Oracle.com/CD/E24628_01/upgrade.121/e22625/TOC.htm

• How to attach GOSA policy to the webservice to deploy times.

  Hello
  
  I want to join political GOSA to a webservice, at deploy time, currently all docs of oracle gave information on the commitment of politicians to pre-installed Web services only, but I want to deploy only time, I don't want to use annotations as that would force change me the source code if in the future, I want to change the policy.
  
  Kind regards
  Rahul.

  Hello Rahul,

  I do not think it is possible, you have two options.
  You can join strategies using one of the following methods:
  At design time, using the @Policy and @Policies annotations, as shown in the example of security adding a Web Service of JAX - WS.
  At the time of the deployment, using the WebLogic Server, such Administration Console as described in policy files combining at runtime by using the Administration Console.
  http://docs.Oracle.com/CD/E21764_01/Web.1111/e13713/message.htm#CDEIFAFH

  Kind regards
  Sunil Polineni

• vertical scale 5152, set up the time

  I use a pxi-5152 in a pxi-1033 chassis.

  I want to play a trick and change the vertical scale between my measurements to increase the dynamic range of a signal that I'm scanning.  I made a loop and changed the vertical scale property node after each measurement.  It works, but when I timed it the loop, she seems to take 80 ms.  I need to do in less than 10 milliseconds.

  Is it still possible?  I see the real time it takes for the scale change or there at - it something to speed up?

  I also have access to a PXI real-time with the same card.  Could only accelerate things or is the digitized the limiting on the change of scale factor?

  Thanks for any help

  -Rich

  Hi rich,

  I see the real time it takes for the scale change or there at - it something to speed up?

  You probably see the effect of the two.  There may be something of software that you can do to improve it, but there's always a material limitation when you do this kind of operation.  Switching of the means of vertical lines change from one type of mitigation to another path.  This means there is sedimentation time involved (electronic and mechanical, with obviously dominant mechanics).  The main element in the run-in will probably be the relays that are reversed.  There must be a minimum period after the passage of a relay to ensure the data read by the digitizer are correct / valid.

  Since you know your signal is going in a direction (descending), then you may be able to improve somewhat by calling the property to write the new range, and then commit node & initiating in a loop which contains a minimum transformation (possibly using queues in LabVIEW to transfer the data in another loop of treatment).  If you need treatment in the loop, you must perform the treatment after niScope commit but before launch niScope.  This will allow the digitizer begin to settle in the new configuration, and you have to wait less time when you're ready to call to initiate.

  I also have access to a PXI real-time with the same card.  Could only accelerate things or is the digitized the limiting on the change of scale factor?

  Real-time processing ensures determinism, it does not necessarily speed up the application.  Determinism and defining a specific priority for calculations of software can help speed upward the software that you are running, the interface of low-level PCI/PXI bus driver with the instrument probably will not change radically.  You can certainly try though and let us know what you measure.

  I can understand if it is a fundamental issue, because normally people are not change the range of vertical entry on the fly, but if there is a way around it, it will avoid the need for me to put an amplifier with variable gain on the front-end server or buy a digitizer with more bits.

  This isn't a perfect suggestion, but just a thought: If you have several scanners at your disposal, you might try setting each to a fixed vertical range and split the signal among them.  TClk, you can synchronize these devices together to make sure your data points are sampled at the same time, and then introduce delays in the initial on each digitizer trigger so that they take account of the waveform in a cascade mode.  For example,.

  Digitizer #1, attached to the greater vertical reach, would have no time limit from the time wherever the trigger is received.

  #2 digitizer, set at a smaller vertical range has a fixed period of (10ms?)

  Digitizer #3, value the smaller Beach, has a fixed time (20ms?).

  Otherwise, if you have assistance with the OR, you could try to call a technical sales engineer to discuss other possible options.

  -Andrew

• Error: The installer cannot set Windows XP required configuration information during the upgrade to Windows XP Home SP3 of Windows XP Pro.

  Original title: OEM Windows XP Home SP3 update XP Pro

  Here is a compilation of the messages from another forum regarding
  My problem:
  ---------------------------------------------------------------

  I'm trying to upgrade a Windows XP Home Sp3 OEM system to
  Windows XP Pro. (There are a few Pro features
  that are not available in the House I now need: (1) the files offline and
  (2) an add-on available for free to Onenote 2007, Top2onenote, requires a Pro).
  I don't want a clean install, but an upgrade. I bought a Windows XP Pro
  Upgrade CD on Ebay that was Windows XP Pro
  Gold (v2002). I'm sure that's true for the following reasons:

  It has been listed as an upgrade, but the CD is not labeled "Upgrade".
  It seems very authentic with all Microsoft holography.
  He came in the standard package of Windows XP (without box),
  and it was sealed.
  The name of volume for the CD is WXPFPP_EN. The Internet,.
  It is the retail of Windows XP Pro RTM (gold)!

  Here are things I tried initially.

  (1) I tried to upgrade to Pro from the purchased CD. It is immediately
  has refused to upgrade indicating the upgrade OS (Pro) is older than the
  installed OS (home)...

  (2) I read about "slipstreaming". "Slipstreaming" allows to integrate
  a service pack with an earlier version of the operating system. I created a
  upgrade XP Pro SP3 with Nlite slipstreamed CD image (and
  Autostreamer later, but it made no difference) from the purchased CD
  and a file containing SP3.

  After you burn the CD and start the upgrade
  (Windows installation), the upgrade process
  product through "information collection."
  "Dynamic update" and "Preparation of Installation" with
  no problems. My computer restarted and returned to
  "Installation preparation". A progress bar called 'Progress '.
  quickly filled to about 90% and the hanging system
  at that time there for about 15 minutes.
  Then, I got the following error message:

  Setup cannot set the required Windows XP configuration
  information. This indicates an internal Setup error.

  This is where I am stuck. I had to leave the installation at this point.
  My drive is starts raining and I had to restore a backup.

  (3) just for the heck of it, I formatted my hard drive and
  reinstalled my original OEM XP Home SP3 OS (no clean up, no user file).
  I immediately used my XP CD slipstreamed Pro to try one
  upgrade to XP Pro and IT WORKED! I need to find out why the
  properly clean XP Home OS upgraded to XP Pro but my pre-existing
  (with the files users, drivers, etc..) XP Home OS does not level
  successfully to XP Pro.
  -------------------------------------------------------------

  Another post:

  Yet once, today, I installed a new copy of OEM Windows XP Home Sp3.
  I continue with installation of all the essential and the add-on
  pilots (essentially all my original version). Then, I
  set up a network connection and firewall. With this configuration,.
  I ran the Pro XP slipstreamed SP3 CD. The upgrade to XP Pro
  success (even if the upgrade not configured my graphics
  card properly). I guess my current problem is either the registry,
  the WINDOWS, some user file or parameter file.
  ---------------------------------------------------------------

  Another post:

  I made a file and the backup of the folder C:\Windows folder
  on my system that is pre-existing (OEM XP Home Sp3). I also did a
  separate the backup the State of the 'system' on my pre-existing system.
  These are added my full image backup of her pre-existing
  system a month ago.

  I did a backup image of my system (minimum fees OEM XP Home
  SP3 with all the original installed drivers over a network configured
  connection and a firewall configured). This system will upgrade
  XP Pro with XP Pro SP3 slipstreamed CD successfully.

  Experiment 1:

  I've restored my minimum system. I then restored the C:/Windows folder
  and the State of the pre-existing system backup system. A startup
  has managed (with a minor irritant). I had to activate Windows.
  Then, I tried upgrading the slipstreamed XP Pro processor. He stopped
  at the same place during the upgrade and gave the same error as before:

  Setup cannot set the required configuration information Windows XP.
  This indicates an internal Setup error.

  Experiment 2:

  I've restored my minimum system. I then restored the system state only
  the backup of the pre-existing system. After startup I was asked to
  activate Windows, but answer Yes to the question would be to disconnect me
  the system. I couldn't get connected to try the XP Pro upgrade.

  Experience 3:

  I've restored my minimum system. I then restored only the C:/Windows
  the backup of the pre-existing system folder. Once again, as in experiment 1,
  the upgrade failed at the same place with the same error message.

  ----------------------------------------------------------------

  Before the experiment 3, I hoped that 3 experience would succeed so I
  could conclude that I had a registry problem. I'm not sure now.
  I don't know what to try next. Take the minimum system and reinstalling
  my files of the user is not an option that my hard drive has over 200 GB of
  programs! If I restore all files and folders of my pre-existing
  I would still have backup to restore a system state the reliable (read the registry).
  ---------------------------------------------------------------------

  Sorry for the length! If anyone has any ideas I would appreciate your responses.

  Thank you

  Hello

  This problem can occur if a piece of hardware that is installed on your computer is not compatible with Windows XP.

  For more information, see this link:

  Error message: Setup cannot set the required Windows XP Configuration information

  Hope the helps of information.

• How to set the parameters of "Configuration ThinPro" via the HP Device Manager

  Hello

  Maybe I'm blind, but how can I set the settings in "Setup ThinPro', accessible from

  ThinPro Control Center-->

  Control Panel-->

  Setup-->

  Configuration ThinPro

  through the HP Device Manager? These parameters allows to use a very strict kiosk mode, which we want to deploy. So far I found just to solve this problem through a complete picture, but this isn't a solution for me.

  I hope that I have forget something or you have another clue.

  Concerning

  Looks like there is no direct way via the HP Device Manager. Now, I manually configure a thin Client and save the registry.xml that I can ride with other devices.

  Concerning