WMI Provider Host has stopped working and was closed
Using Vista SP2
Only recalled recently by updates to Adobe Reader and updates Windows security up to and including April 15. About a week ago, I started getting error messages appear that State:
"Microsoft Windows
WMI Provider Host has stopped working and was closed.
A problem with the application to stop functioning properly. Windows will notify you if a solution is available.
When you click on 'Close'
I stopped several times and the problem continues to exist. Delete the messages and that they recur usually every 10 minutes. This problem seems more common with open Facebook. Can anyone tell what changed to cause this start happening and I have to do to remedy this? Hello world You can determine exactly what causes most of the problems by following the steps below: Method 1: Put the computer in safe mode and see if the problem persists: http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode Method 2: Clean boot If the problem is not repeated in safe mode, there is probably a startup item or service is causing the problem. Follow the steps on the following link to locate the item or service responsible for the error: http://support.Microsoft.com/kb/929135 Cody C Tags: Windows "winrscmde has stopped working and was closed". 6 months get more messages-popup "winrscmde has stopped working and was closed" - other problems with adobe, launcher hook antispam OE, consumer software customer, internet micro-low utility of seizure and windows host (rundl32) process all have in time has stopped working - I followed most of the suggestions sent to me and no result - spent money on drivers and norton and just tired that - using Windows Vista Edition Home Premium Hello I got this error message "winrscmde has stopped working and was closed". ERROR WINRSCMDE I got this error message "winrscmde has stopped working and was closed". Program WINDOWS SECURITY ESSENTIALS download, which found the horse of TROJAN ALUERON in my system. Also, he explains that he keeps duplicating itself and the only way to get rid of it is to download WINDOWS DEFENDER on a CD/DVD or the key to a processor that has the same operating system as the infected CPU offline. I want to know if this Trojan horse attaches to the BIOS? Please tell me the other options... Thank you Bruce There is also another problem of ntdvm that I meet where the file ntdvm.exe continues to the multiple (i.e. numeorus ntdvm.exe files are running in the Task Manager) to the point where my computer slows down and ends by crashes. Very grateful for any solution for every problem! I am running vista. * original title - ntvdm.exe has stopped working and was closed...? Recurring problem! * Hello 1. don't you make changes to the computer before that happened? 2. Once you get this error message? I suggest you to try the steps below and check if it helps. Method 1: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace. http://support.Microsoft.com/kb/929833 Method 2: Also try to set up your computer in a clean boot state, and check if the same issue occurs. By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem. How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7: Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode. Method 3: Try to scan your hard disk from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software. The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software. http://www.Microsoft.com/security/scanner/en-us/default.aspx Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. Hope this information is useful. Error message: SubsystemApp spooler has stopped working and was closed Problem is with printer Epson EPL5900L laser which is not compatible with Vista. Found advice on forum Epson use XP driver and it should work, but try the message received the error "Spooler SubsystemApp has stopped working and was closed". Drivers XP crashed the spooler service is provides printing functionality. Use a Vista / 7 compatible printer. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/ MICROSOFT WINDOWS SEARCH INDEXING HAS STOPPED WORKING AND WAS CLOSED Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: Links Internet and e-mail freezes, slow, screen turns off and stops. When I get the system operational, I get the message MICROSOFT WINDOWS SEARCH INDEXER has STOPPED working AND WAS CLOSED. Can not activate system restore to go back. Hello For Internet Explorer from freezing, you can optimize Internet Explorer and see if the problem still occurs. How to optimize Internet Explorer Because of Windows search indexer, it seems that there is a fix available, you can contact Microsoft Customer Service & provide article kb 952053, which contains the fix. Hope the helps of information. Please post back and we do know. Can't print Photosmart C5280. Error "object GPCore COM has stopped working and was closed". I have problems printing my Photosmart C5280 All-in-one on my desktop of Windows Vista 32-bit. I felt for a few years and have only recently met this issue. A few months ago, I set up a home network so I could print from my Toshiba laptop. The printer is connected to the computer via a USB cable and the laptop is connected via a Bigpond Modem/Router which is connected to the desktop via an ethernet cable. More recently, I have also configured for my son to be able to print from his HP laptop. Initially, we were able to print from any computer. The two paltops are running Windows 7 64 bit. However, in recent weeks, we noticed that we were no longer able to print from a laptop, and a few days ago, I was unable to print from the office. When I try to print from the office, the print job seems to go to the print queue, but is then removed from the queue. I then get an error message "GPCore COM object has stopped working and was closed". This applies to all applications even the test print. I just went through the steps on the HP site, including downloading and execution of printing HP troubleshooting and doctor Scan and uninstall then reinstall the printer. I'm a bit of a novice at the side Computer Hardware and wonder if there is anyone out there who has had a similar problem and found a solution. Any thoughts would be appreciated. Hello MikeF48, Sometimes to do a simple uninstallation / reinstallation is not do the trick, and we try to remove all the software from the computer completely. Most of the drivers available at HP have a scrubber utility that removes all traces of the software on the computer and allows you to reinstall the software fresh. We should start there and see if that gets us running. I recommend you to do all this on the Vista machine. Once we have a working computer we can then pass from there to other laptops. Here are the instructions to use the tool of the scrubber. There are two sets of instructions, one for if you have installed the drivers from the HP website or if you have installed the drivers from the CD that came with your printer. Follow the instructions for your installation accordingly. Of the Original installation CD:
After having uninstalled the software and did a reinstall of fees. Let me know if the problem is still the Outlander. Installer of Modules of Windows has stopped working and was closed Hello Greetings mollypopsicle, I see that we have always had problems with this update. This leaves me with the question about the possibility of fi computer update auto is damaged during download. I would like to have you create a folder on your desktop. Right-click on an empty spot on the desktop / new / file - name of the folder KB958623. If you have a download manager, please use it to download the KB958623 update from this Web site http://catalog.update.Microsoft.com/v7/site/search.aspx?q=958623%20 Make sure you use the version of Windows Vista that applies to your system. Once the download is complete and before running the update Here is a link on how to hide the update Select only the I'm getting offered an update from Windows that I don't want. However, before you do, check which version of Windows Vista is ran - home edition, Premium, Ultimate, it is 32-bit or 64-bit edition. Also, if there is an error of execution of this manual update mode safe mode with networking, include this information in the forum. Thank you and continue to keep us informed of the State of this update. Best regards Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think. Windows Update, error: "Windows Modules Installer has stopped working and was closed". Whenever I run windows update, and try to install an update for Vista, I get the error message" "Windows Modules Installer has stopped working and was closed" . This has happened for quite awhile and I tried many suggestions on the web. If you do an internet search, you will see this seems to be a fairly common problem, but I can't find any official solution of Microsoft. I am afraid that I do not receive the latest updates and security patches so would like to help with this question. Thank you Luke Hi guys I had installed up-to-date antivirus software and my problem seems to start after an update from Microsoft. Do a search on the web and you will see similar stories. I spent so much time trying to solve this I think it's better just to do a re-install. Certainly not the resolution I had hoped, but appreciate this type of questions are almost impossible to solve the problems through intermittent mail such messages. Thank you Luke manages scheduled tasks has stopped working and was closed Lately I get this error message often when I start using my Vista PC (Vista Business SP2) in the morning: "manages scheduled tasks has stopped working and was closed". And this morning the automatic update of Windows Defender definitions also could not install (so I would be dnld and installed). Set to automatic update referred to 'unknown error' (8 and 57, I think). FYI, sfc/scannow reported no integrity violoations with system files. I also reconfigured my PC there is to make sure that it is clean, fresh and perfectly up-to-date before reinstalling all my apps, and it's been updated for about 2 months then. How this application problem "manages scheduled tasks" can be fixed? If you don't know, where can I get an answer? Neither Google nor Bing seem to show any reference to the exact phrase "" manages scheduled tasks has stopped working stopped working '. " Craig in New Jersey Update 7/22: I'm starting to suspect a problem of interactions between turn off Vista and [printer] HP Digital Imaging Monitor. I tried to disable it via msconfig, a couple of days and have not seen the mistakes regularly ever since, but the jury is still pending for another week or two. I'll report after awhile. It is too early to point a finger because we know that all of them have well worked normally in the past and they seem equally at risk of corruption. For example, I have no these errors when you use the same software HP on my Win7 PC and I don't have these errors for a few months after that the reconstruction of my Vista laptop, so I'm suspecting some piece of software has become corrupted (something in Vista), or something the tracking software program, some windows or component or registry setting software execution to one who relies on the HP printer. Craig in New Jersey Update 7/27 edit: Since disabling component HP Digital Imaging Monitor (hpqtra08.exe) drivers HP printer/scanner more than a week ago, I have not seen error messages 'has stopped working and was closed"breed, and Windows Update seems to operate normally. Message "Microsoft (C) Register Server has stopped working and was closed" appears When I start up I get the message "Microsoft (C) Register Server has stopped working and was closed". Here, an article which offers a solution to this problem that seems easy to implmenent and is worth a visit:
I hope this helps. Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. Microsoft error message "R003. EXE has stopped working and was closed ". Anyone know what this means? Microsoft Windows 'R003. EXE has stopped working and was closed "it doesn't affect my computers operation at all. Discussions were merged. Deleted duplicate. I just found this while trying to get the answer. I gave him a shot and think that it does the trick. http://malwaretips.com/blogs/default-tab-search-bar-removal/ AFN Updater has stopped working and was closed Original title: AFN Updater I get the following: AFN Updater has stopped working and was closed A problem with the application to stop working properly, Windows will notify you if a solution is available. The message stays all the time. It has something to do with a phone, what can I say, but do not know how to get rid of it. Any suggestions? C Hello Search in the two programs and features and uninstall or look for a boot entry. "How to use MSCONFIG in Windows Vista" http://www.netsquirrel.com/Msconfig/msconfig_vista.html You can also use this free program to do, too: "Autoruns for Windows V11.32" http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx See you soon. Windows Audio device Graph Isolation has stopped working and was closed. I am running Windows Vista Ultimate 32 bit. My volume on the system tray icon has an 'X' on it, and when I mouse over it it says "audio service does not work." When I right click on it, the open Volume mixer is grayed out and unclickable. When I get my audio settings / sounds an error pops up saying "Windows audio service is impossible. You want to allow it? "I click on Yes and then he said: 'Windows Audio Graph insulation has stopped working and was closed. » the error report is: Signature of the problem «» Additional information about the problem This is on a DELL XPS M1710 No software installation seemed promt it. What are my options? deafinhum, Here is an article to help you with the repair process. Please let us know if you need more assistance. http://support.Microsoft.com/kb/936212 Thank you Desktop Window Manager has stopped working and was closed One of our machines (HP Pavilion dv7 Notebook PC running Windows Vista x 64) will receive the error "Desktop Window Manager has stopped working and was closed" with lots of close error. He reappears (as well as all windows flasher to non-aero, then back to aero) in a few minutes, spends about 5 times per hour. I did some research on this and have already taken the following measures without a bit of luck: 1 run the command chkdsk / SFC scan - nothing found via chkdsk, SFC found some issues fixed, and some, it did not set. Them that it solves not all related to Windows Sidebar, which I do not / does not start. 2. put updated drivers for ATI Radeon 3200HD - this had a lot of new questions. Installing caused newer drivers ATI catalyst to no longer work with errors during installation and popup errors at startup. After trying several solutions workaround to try to get installed it, I ended up coming back to the driver that came with the laptop, that are properly installed and working without error. I am skeptical of update of this stable driver as a solution to the dwm.exe error. 3. this problem just started yesterday, that occur with not a lot of changes. Other than updates of windows (I think that .NET framework and a few other updates installed), I replaced NOD32 antivirus with Bitdefender antivirus. The system was stable with bitdefender for about 2 weeks, so I'm not convinced that this program is causing the error. 4. the event viewer shows the following: Failing application Dwm.exe, version 6.0.6002.18005, time stamp 0x49e02696, failed module ntdll.dll, version 6.0.6002.18881, time stamp 0x51da3d16, exception code 0 x 80000003, offset 0x00000000000461f0, process id 0 x 124 error, start the application time 0x01cea0365a457adc. Offset, process id and start on time all vary, but there are a lot of these application errors in the viewer all screaming Dwm.exe like the failing application. What should be my next course of action? You do not receive an error but a caveat. NTStatus results (the set of codes execption used by ntdll - the failed module) begin to 0 for no error, 4 for information (you should never see this), 8 for putting guard and C for error. It's your specific error. // Problem is, you shouldn't have breakpoints. Breakpoints are set by debuggers and stop the execution of the program to the State of the program can be examined. There should be no breakpoints in a retail system. More breakpoints are inserted into memory during execution of the program in a debugger. They tend not to do in the actual file. So here are two assumptions, either you have no exit code, IE test code (driver?). Or you have a running program that behaves like a debugger (which is suspect). Each of the three towers of programs, services, and drivers in increasing amounts. So restrict the possible culprits. Clean boot
If the above does not help. Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Uncheck the box just to the left. Reset. If this resolves your wake problem half of the items until you find the one that. Safe mode If the above does not help.
What real difference I notice between 1.4 ghz and 2.6 ghz models? I am not a number cruncher or graphic designer. A lot of pictures. $200 is a lot for an unnecessary speed. What do you think? Hello I have an 8-bit binary number and I need to multiply it by a 4-bit binary number immutable. I tried to use vipers, switches and lights but quickly missed components in the student edition. Can someone suggest another method? That is to say, a c p by receiving emails telling me that I need to give all the details of my account and passwords or my account will be deleted. Others benefit from this I have laptop Dell Vostro 3446 series in which Bluetooth not transmits or receives a signal. I installed all the drivers still does not. Provide it please help me Concerning Vivek S BSOD on the login screen: DRIVER_IRQL_NOT_LESS_OR_EQUAL (Windows 7) I got hurt on and off with BSOD over the past months, but I didn't pay it any mind, because they were few and far between. Today, however, I found that my computer will reach the login page of Windows 7, then glitch, going the BSOD. I managed to brea
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.Similar Questions
http://support.Microsoft.com/kb/929135
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
1. Insert the CD in the drive and then cancel Setup
2. open my computer and click right then on the CD from the drive and select open
3 open the Util folder
4 open the CCC folder
5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://get.Adobe.com/flashplayer/
9 download drivers and full software features
Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
10. run the download to reinstall the printer
If the software has been downloaded and extracted to your system:
1. type % temp % in the field of race
2. Locate and open the folder starting with 7z (example: 7zS2356)
3 open the Util folder
4 open the CCC folder
5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://get.Adobe.com/flashplayer/
9 download drivers and full software features
Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
10. run the download to reinstall the printer
I have a laptop Toshiba Satellite (running Vista Home Premium) that I bought about two months ago. When he tries to run updates, he routinely gets through a few and then up pops the message "Windows Modules Installer has stopped working and was closed." I have already reinstalled Windows Updates and Microsoft Updates, nothing helps. Recently, she was immobilized on the KB958623 update, so I tried to install that separately, but the same message popped up and it did not work.
Help?
Thank you!
Problem event name: APPCRASH
Application name: AUDIODG. EXE
Application version: 6.0.6001.18000
Application timestamp: 47919284
Fault Module name: AUDIODG. EXE
Fault Module Version: 6.0.6001.18000
Timestamp of Module error: 47919284
Exception code: c0000005
Exception Offset: c 000070 0
OS version: 6.0.6001.2.1.0.256.6
Locale ID: 1033
Information additional 1:3502
More information 2: a465924573e02e7dbf28b31e7ea12c28
Additional information 3: a4b
Additional information 4: 91409072175cd5a219bdca7388005249
Bucket ID: 932674242 "
I uninstalled the driver and reinstalled, uninstalled the device itself and not reinstalled, no change.
If you run the utility from the Vista DVD System File Checker, it will extract the files it needs to turn off the DVD to replace those damaged. If this does not work, you will need to do a repair of your Vista installation.
Gloria
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
MessageId: STATUS_BREAKPOINT
//
MessageText:
//
EXCEPTION {}
Breakpoint
A breakpoint has been reached.
//
#define STATUS_BREAKPOINT ((NTSTATUS) 0x80000003L) / / winnt
msconfig
Tip clean boot
msconfig
Maybe you are looking for