Binary multiplication

Similar Questions

• Download the virtual machine in a store of data with powercli

  Hello

  How to list the files of virtual machine on a store of data with PowerCLI

  I have a virtual machine and I want to see all the files in a data store (such as hard,.-flst.vmdk, .log, .nvram) using powercli. Is this possible?

  TKS.

  Try the following, it uses a function of my position of friendly units .

  Function Get-FriendlyUnit {}

  <>

  . Numbers converted small binary multiples SYNOPSIS

  . DESCRIPTION the function accepts a value and him will convert

  in the largest available binary unit.

  . Author NOTES: Luc relaxing

  . Value of the PARAMETER

  The value to convert.

  This number must be positive.

  . IEC PARAMETER

  A switch to indicate whether the function should return the CIS

  Unit, or the names of the units most commonly used names.

  The default is to use the commonly used unit names.

  . EXAMPLE OF

  PS > Get-FriendlyUnit-value 123456

  . EXAMPLE OF

  PS > 123456 | Get-FriendlyUnit - CIS

  . EXAMPLE OF

  PS > Get-FriendlyUnit-value 123456,789123, 45678

  #>

  (param

  [CmdletBinding()]

  [parameter (mandatory = $true, ValueFromPipeline = $true)]

  [double []] $Value,.

  [switch] $IEC

  )

  Begin {}

  $OldUnits = "B", "KB", "MB", "GB", "TB", "PB", "EB", "ZB", "YB".

  $IecUnits = 'B', 'KiB', 'MiB', "GiB", "TiB", "PIF", "BANK", "ZiB", "YiB".

  If ($IEC) {$units = $IecUnits} else {$units = $OldUnits}

  }

  {in process

  $Value | %{

  If ($_ - lt 0) {}

  Write-Error "Numbers must be positive."

  breaking

  }

  If ($value - gt 0) {}

  $modifier = [math]: Floor([Math]::Log($_,1KB)))

  }

  else {}

  $modifier = 0

  }

  New-object PSObject-property @ {}

  Value = $_ / [math]: Pow(1KB,$modifier)

  Unit = & {if ($modifier - lt $units. {Count) {$units [$modifier]} else {'1KO E {0}' f $modifier}}

  }

  }

  }

  }

  foreach ($vm in (Get-View - ViewType VirtualMachine - property Name, 'LayoutEx.File')) {}

  $vm. LayoutEx.File |

  Select @{N = "VM"; E = {$vm. Name}},

  @{N = 'Name'; E={$_. Name.Split(' ') [1]. "Split('/') [1]}},"

  @{N = "Path"; E={$_. Name}},

  @{N = 'FileType'; E={$_. Type}},

  @{N = "Datastore"; E={$_. Name.Split(']') [0]. TrimStart('[')}},

  @{N = "size"; E = {}

  $val = get-FriendlyUnit-value of $_. Size

  "{0:n2} {1}" f $val. Value, $val. Unit

  }}

  }

• Problem with font color in the report formatting

  Hello

  I set up a script that reports on data warehouses of various code examples and Get-FriendlyUnit of LucD finction.

  The output formats the red color for the space put into service when it is larger than the Capactiy, but for some reason, in some cases, the police are still red even when Provisoned space is not greater than the capacity:

  

  This code I use to change the font color:

  If ($Capacity - gt $Provisioned)
  {$tableEntry = "< tr > < td > < font ="Tahoma"> $Name < / font > < table > < td > < Center > < font ="Tahoma"> $Capacity < / police > < / center > < table > < td > < Center > < font ="Tahoma"> $Provisioned < / police > < / center > < table > < td > < Center > < font ="Tahoma"> $FreeSpace < / police >"} "< / center > < / TD > < td > < Center > < / police > < / center > < table > < /tr >".
  Add-Content, $fileName $tableEntry
  Write-Host $tableEntry}

  ElseIf ($Capacity - lt $Provisioned)
  {$tableEntry = "< tr > < td > < font ="Tahoma"> $Name < / fonts > < table > < td > < Center > < of police ="Tahoma"> $Capacity < / police > < / center > < table > < td > < Center > < font ="Tahoma"color ="red"> $Provisioned < / font > < / center > < table > < td > < Center > < font ="Tahoma"> $FreeSpace < / fonts"} ' > < / center > < table > < td > < Center > < / police > < / center > < table > < /tr > ".
  Add-Content, $fileName $tableEntry
  Write-Host $tableEntry}

  Here's the complete code:

  If ((Remove-Item "DS-Report.htm»-ErrorAction SilentlyContinue) - eq $null)
  {Remove-Item "DS - report.html"-ErrorAction SilentlyContinue}

  
  #Connect to vCenter Server
  #---------------------------------------
  $vC = "VC1.
  SE connect-VIServer $vC - WarningAction SilentlyContinue

  $date = (get-Date). ToString('yyyy/MM/dd')
  $Title = "report on the use of the data store.
  $DC = "Datacenter1".

  $DateStamp = get-date - uformat "%Y-%m-%d@%H-%M-%S."

  New course in the #Create file
  New-Item ItemType - file "DS - report.html.
  $fileName = "DS - report.html.
  #-------------------------------------------------------------

  #HTML header for the output
  Function writeHtmlHeader
  {
  Param ($fileName)

  Add-Content $fileName "< html >".
  Add-Content $fileName "< head >".
  Add-Content $fileName "< meta http-equiv ="Content-Type"content = text/html"; " charset = iso-8859-1 "" > ""
  Add-Content $fileName '< title > $Title < /title >'
  "Add-Content $fileName ' < STYLE TYPE =" text/css">"
  Add-Content $fileName "<!--
  Add-Content $fileName "td {}.
  Add-Content $fileName ' do-family: Calibri;
  Add-Content $fileName "-font size: 13px;
  Add-Content $fileName "border-top: 1px solid #999999;"
  Add-Content $fileName "border-right: 1px solid #999999;"
  Add-Content $fileName "border-bottom: 1px solid #999999;"
  Add-Content $fileName "border-left: 1px solid #999999;"
  Add-Content $fileName "padding-top: 0px;"
  Add-Content $fileName "padding-right: 0px;"
  Add-Content $fileName "padding-bottom: 0px;"
  Add-Content $fileName "padding-left: 0px;"
  Add-Content $fileName '} '.
  Add-Content $fileName 'body {} '.
  Add-Content $fileName ' left margin: 5px; "
  Add-Content $fileName "margin-top: 5px;"
  Add-Content $fileName ' margin-right: 0px; "
  Add-Content $fileName "margin-bottom: 10px;"
  Add-Content $fileName «»
  Add-Content $fileName "table {}.
  Add-Content $fileName ' border: thin solid #000000; "
  Add-Content $fileName '} '.
  Add-Content $fileName "->".
  Add-Content $fileName "< / style >.
  Add-Content $fileName "< / head >.
  Add-Content $fileName "< body >".
  Add-Content $fileName ' < table width = 60% ">".
  Add-Content $fileName "< tr bgcolor ="#FFFFFF">."
  Add-Content $fileName "< td colspan = '7' height = '25' align ="center">"
  #Edit title below
  #Add - Content $fileName "< font ="Tahoma"color = 'red' size = '3' > < strong > criticism - < facilities > < / font >.
  #Add - Content $fileName "< police ="Tahoma"color = 'gold' size = '3' > WARNING < strong > - < facilities > < / font >.
  Add-Content $fileName "< police ="Tahoma"color =" #003399 ' size = '3' > < strong > $Title - $Date < / strong > < / police >»»
  #--------------------------------------------------------------------------------------------------------------------------------------------------------------

  #Edit title above
  Add-Content $fileName "< table >.
  Add-Content $fileName "< /tr >".
  Add-Content $fileName "< / table >.
  }

  #----------------------------------------------------

  # Function to write the HTML header to the file
  Function writeTableHeader
  {
  Param ($fileName)
  Add-Content $fileName ' < table width = 60% ' > < tbody >.
  Add-Content $fileName "< tr bgcolor = #003399 >.
  Add-Content $fileName "< td align ="center"> < of police ="Tahoma"color ="#FFFFFF"> < b > data store name < /b > < / police > < table >.
  Add-Content $fileName "< td align ="center"> < of police ="Tahoma"color ="#FFFFFF"> < b > capacity < /b > < / police > < table >.
  Add-Content $fileName "< td align ="center"> < police ="Tahoma"color ="#FFFFFF"> < b > space configured < /b > < / police > < table >.
  Add-Content $fileName "< td align ="center"> < of police ="Tahoma"color ="#FFFFFF"> < b > free space < /b > < / font > < table >.
  #Add - Content $fileName "< td align ="center"> < of police ="Tahoma"color ="#FFFFFF"> < b > % free < /b > < / police > < table >.
  Add-Content $fileName "< /tr >".
  }

  #--------------------------------------------------------

  # Function to write the HTML footer
  Function writeHtmlFooter
  {
  Param ($fileName)
  Add-Content $fileName "< / table >.
  Add-Content $fileName "< / body >".
  Add-Content $fileName "< / html >".
  }

  #--------------------------------------------------------------
  #---Fonction Get-FriendlyUnit-
  #--------------------------------------------------------------
  Function Get-FriendlyUnit {}
  < #.
  . Numbers converted small binary multiples SYNOPSIS
  . DESCRIPTION the function accepts a value and him will convert
  in the largest available binary unit.
  . Author NOTES: Luc relaxing
  . Value of the PARAMETER
  The value to convert.
  This number must be positive.
  . IEC PARAMETER
  A switch to indicate whether the function should return the CIS
  Unit, or the names of the units most commonly used names.
  The default is to use the commonly used unit names.
  . EXAMPLE OF
  PS > Get-FriendlyUnit-value 123456
  . EXAMPLE OF
  PS > 123456 | Get-FriendlyUnit - CIS
  . EXAMPLE OF
  PS > Get-FriendlyUnit-value 123456,789123, 45678
  . EXAMPLE OF
  PS > Get-Datastore-name DS1 |
  Select Name,@{N="Capacity; E = {}
  Get-FriendlyUnit-value ($_.) CapacityMB * 1 MB) |
  % {"{0, 7:f2} {1,2} ' f $_"} Value, $_. Unit}}
  }
  # >
  (param
  [CmdletBinding()]
  [parameter (mandatory = $true, ValueFromPipeline = $true)]
  [double []] $Value,.
  [switch] $IEC
  )

  Begin {}
  $OldUnits = "B", "KB", "MB", "GB", "TB", "PB", "EB", "ZB", "YB".
  $IecUnits = 'B', 'KiB', 'MiB', "GiB", "TiB", "PIF", "BANK", "ZiB", "YiB".
  If ($IEC) {$units = $IecUnits} else {$units = $OldUnits}
  }

  {in process
  $Value | %{
  If ($_ - lt 0) {}
  Write-Error "Numbers must be positive."
  breaking
  }
  If ($value - gt 0) {}
  $modifier = [math]: Floor([Math]::Log($_,1KB)))
  }
  else {}
  $modifier = 0
  }
  New-object PSObject-property @ {}
  Value = $_ / [math]: Pow(1KB,$modifier)
  Unit = & {if ($modifier - lt $units. {Count) {$units [$modifier]} else {'1KO E {0}' f $modifier}}
  }
  }
  }
  }
  #---Fin of the Get-FriendlyUnit function-

  Function GetDS {}
  $report = get-data center $DC | Get-Datastore.
  Where-Object {$_.} {Name - notlike "DataStore1 *"} | %{
  New-object PSObject-property @ {}
  Name = $_.name
  Capacity = Get-FriendlyUnit-value ($_.) CapacityMB * 1 MB) |
  % {"{0, 7:f2} {1,2} ' f $_"} Value, $_. Unit}
  Put into service = Get-FriendlyUnit-value ($_.) ExtensionData.Summary.Capacity - $_. ExtensionData.Summary.FreeSpace +.
  $_. ExtensionData.Summary.Uncommitted) |
  % {"{0, 7:f2} {1,2} ' f $_"} Value, $_. Unit}
  FreeSpace = Get-FriendlyUnit-value ($_.) FreeSpaceMB * 1 MB) |
  % {"{0, 7:f2} {1,2} ' f $_"} Value, $_. Unit}
  
  }
  } | Sort-Object-property name
  $report | %{
  WriteData $_. Name $_. Capacity $_. Provisioned $_. FreeSpace
  }
  }

  
  # Function compiles the data transmitted by the GetDS function in HTML table format
  Function writedata {}
  Param ($Name, $Capacity, $Provisioned, $FreeSpace)

  
  If ($Capacity - gt $Provisioned)
  {$tableEntry = "< tr > < td > < of police ="Tahoma"> $Name < / font > < table > < td > < Center > < of police ="Tahoma"> $Capacity < / police > < / center > < table > < td > < Center > < fonts"}

  "face ="Tahoma"> $Provisioned < / police > < / center > < table > < td > < Center > < font ="Tahoma"> $FreeSpace < / police > < / center > < table > < td > < Center > < / police > < / center > < table > < /tr >".
  Add-Content, $fileName $tableEntry
  Write-Host $tableEntry}

  ElseIf ($Capacity - lt $Provisioned)
  {$tableEntry = "< tr > < td > < of police ="Tahoma"> $Name < / font > < table > < td > < Center > < of police ="Tahoma"> $Capacity < / police > < / center > < table > < td > < Center > < fonts"}

  face = "Tahoma" color = "red" > $Provisioned < / police > < / center > < table > < td > < Center > < font

  "face ="Tahoma"> $FreeSpace < / police > < / center > < table > < td > < Center > < / police > < / center > < table > < /tr >".
  Add-Content, $fileName $tableEntry
  Write-Host $tableEntry}

  < #.
  ElseIf ($_.) PercFree - $Warning lt)
  {$tableEntry = "< tr > < td > < of police ="Tahoma"> $Name < / font > < table > < td > < Center > < b > < of police ="Tahoma"> $Capacity < / police > < / b > < / center > < table > < td > < Center > < b > < fonts"}

  face = "Tahoma" > $Provisioned < / police > < / b > < / center > < table > < td > < Center > < b > < of police = "Tahoma" > $FreeSpace < / font > < / b > < / center > < table > < td > < Center > < b > < fonts

  "face ="Tahoma"color ="Orange"> $PercFree < / police > < / b > < / center > < table > < /tr >".
  Add-Content, $fileName $tableEntry
  Write-Host $tableEntry}
  # >
  }

  
  VCenter server ##Disconnect
  ################################
  Disconnect-VIServer-confirm: $False

  The script ##End

  Hello, AGFlora-

  It seems that comparisons of the value (the "-lt" and "-gt") you here are values after they were formatted to units 'friendly' and then processed into strings.  Comparison operations then do not give the results you expect, because comparisons are these strings, instead of the actual numbers.  Illustration:

  PS C:\> "600.00 MB" -lt "594.75 GB"
  False
  PS C:\> "600.00 MB" -gt "594.75 GB"
  True
  

  Clearly not what you expect if the comparisons are numbers instead of strings.

  Then, you'd better keep the values of size in the form of numbers until it is time to display them (or write HTML code).  That way comparison operations (numbers) will be behave as desired/expected, and your conditional formatting should work.  The key to making comparisons of real numbers, and then use the values of string shaped numbers for the HTML output.  Make sense?

• Storage capacity of the material shows less LUN capacity

  We have created a 350 GB LUN (shown as 349,9 GB in the SAN management software). When it is presented to the host of the ESXi5, the ability is showing that 325,96 GB. This is about a difference of 25GB, which willl add up while we present more LUNS. Is this normal? ESXi resembles the LUN capacity differently than does the SAN?

  Thank you very much in advance for any help. Any ideas would be greatly appreciated.

  Your SAN management software not interpret "350GB" as a binary multiple (2 ^ 10) but as a multiple of base 10 (10 ^ 3), so it has a LUN with a size of 350000000000 bytes. ESXi, like any good piece of software, using binary notation, which means 350000000000 equal to 326 G 'binary' (i) B bytes

  See:

  http://en.Wikipedia.org/wiki/Binary_prefix

• binary matrix multiplication

  Hello

  How to multiply two binary matrices in labview? tried using Boolean OR operator, but it does not work

  Thank you

  
  

• Multiple entries in a 2D DBL in binary table

  Hello.
  Someone at - it an example of writing a table 2D in a binary file several times?

  Specifically, I need to write a DBL 2D array at once mulitple of binary and then (later) be able to read this return (convert to DBL). All the examples I found only make an entry and then close the file. I have to leave the reference to open files and write data on it during the period of a few days. The data comes from a queue that is fed a DAQ loop. (In a loop of the acquisition, I fed a queue and in a slower loop, I remove the data and write it to disk)

  I believe it has something to do with the point of sale mode and shift mode but I can't understand it.

  I was not able to read correctly that the data still return from the file .bin so I don't know if I still write it correctly.

  The closest example of you I found is data recorder high speed and the data reader high speed, but I did not have luck with those.

  Thanks in advance.
  Steve
  LabVIEW 7.1

  You shouldn't look any further that which is on the file IO > screws of binary palette. There is a high level VI called the SGL file writing. There are a couple of subVIs. You can use a version modified to write file + [SGL]. Just change the representation of the tables of DBL entry and save it under a new name and in a new location. Just as the high level VI called, at the beginning of your program, open/create/replace, call the new file write whenever you need, and then at the end, call the function file close. By default, I think that the VI file write will write at the end of the file.

• Generation of series in multiple channels

  Hi forum, I need to ask a few questions. Any help is appreciated.

  (1) I need help with the generation dynamic series in several channels. Here, we can see how the dynamic data set generated by a single channel. But I can't find anywhere, how to generate several series signals in multiple channels.

  (2) what is the limit for this generation series? I think it depends on the material, but I don't know, what is the limit. My hardware is SMU-6544.

  (3) it is possible to generate different signals in different channels using scripts? and to start the production in these channels at the same time? the example given in the script generation labview is unfortunately only for the generation of a channel.

  Thanks in advance,

  Kind regards

  Yan.

  Hi Yan,

  Produce on several channels with multiple data is difficult without a tool to view the data, or series of each channel bitstream concatenated into a software ADE and transposed before be downloaded into memory.  To make Visual things here, I'll assume that you want to generate a pattern of 3 bits on sample of channels 0, 1 and 2 is 8 wide.  Assume the following models of the series bit for each channel:

  ch 0: 0101 1010

  CH 1: 0000 1111

  CH 2:0100 1101

  So the question now is, how do you load this in the SMU-6544(or any other HSDIO hardware)?  Of the two options, you can use Digital Waveform Editor (NEWS) to create visually and save to a file type HWS then load a DJ using the API HSDIO.  It is the easiest in my opinion.

  The second way is construction examples of data based on a basic example.  I want to say is you take it all binary streams and built a 2D table so that it looks like:

  01011010

  00001111

  01001101

  An array of 3 x 8 and then transpose the table that turns into:

  000

  101

  000

  100

  111

  011

  110

  011

  Here you can see we have 8 lines, each line is a sample, and in the form of U32 read in decimal, you get 0, 5, 0, 4, 7, 3, 6, 3.  That's what you can load into our niHSDIO U32 function write a waveform.  I hope you can see how this translation occurs and how it looks like in terms of load on the jury.  Each sample usually contains data for all channels, where each bit in the U32 is one of the 32 channels available on your device.  So if you want to write a '1' on Channel 5, you would load a value of 0000 0000 0000 0000 0000 0000 0010 0000 in the form of sample, where the 5th bit is 1 and all the other bits 0.  In decimal, you would write '32' value.

  With regard to the limitation of the size of series, if your flow rate is slow enough you can disseminate and make an almost endless stream, but assuming that you are running at the maximum rate, your series of waveform size is limited by the size of your on-board memory.  Since each sample generation is 32-bit, which is 4 bytes for example, if a memory size of 32 MB will correspond to 8MS bitstream series max.

  For any questions or comments are welcome.  Thank you.

• How to make shift register init happens only once, so that the data can persist across multiple tracks of a loop?

  Here's the situation:

  We are repeatedly followed eight real-world signals and comparing them to a threshold value.  We do this via a loop For inside a While loop.  The loop For runs eight times per pass.  We have implemented a binary table 1 d and the use of the index of the loop For as the array index, by putting a Boolean result in the table using the function replace table subset.  We want to keep the data in the table to be 'sticky', in the sense that any True value is locked, so even if a fake comes later, this array element true.  However, since we initialize the array in order for the replacement to the work table, we see that whenever the loop For again, it resets the table and destroys the history.

  I have attached a simple VI to illustrate the concept, using a random number generator as a stand-in for the real world signals.  How we change this VI do and entered real lock through multiples for loop runs, indefinitely?

  In case it is not obvious, I am a relative beginner, so please keep count in your response.

  Thank you

  B

  scottbbb wrote:

  For B, although I love the simplicity of it, I have a question: it solves the problem of the re-initialization?  What the shift of the While loop register get initialized - only once during its launch?

  Yep, the shift register Initializes only at the beginning.  You could say that every time the while loop is called (not each iteration) the shift register is reset with the wrong table.

  And, Yes, GOLD will always keep a REAL when it is TRUE.

  Usually, the simplest solution is the best.

• Nor-daq-mx: generate multiple samples

  Hello!

  I need to send a binary file multiple to a multiplexer, when I get a TTL signal, then I need to read the signal for each sensor.

  But my vi, just send 1 one after the other: /, I tried a lot of things, but I'm stuck.

  Edit: FYI I use one or pci6251 and labview 8.5

  Here is a simplified version of my VI and and draw little I did for you.

  u didn't do well understand what I want to do but u can have another solution, in any case, I managed to succeed.

  check the VI I attached, it works.

  at each TTL, I generate a pulse train, and the binary words are synchronized on the pulse train.

• How you can list multiple paths of the files?

  Hello!

  I use the "write to binary file" vi and I need to write a bunch of different files. Is there a way to add multiple names of paths to it? The Green thingy seems to only allow you to put one there at the time, and I would not have 20 'write in the binary' in my project of vi...

  Thank you!

  Provide paths in a table and use a loop!

  See you soon

  Edgar

• Detection of edge in the binary image

  Hello

  I have an image that I play with Vision Assistant. I used the threshold function for binarise, and I have now two blobs straightish separate in the right corner below. I want to be able to detect the outer edges of this pair of bloba, but can't seem to do it using the edge detector or Straight Edge tools.

  

  Can you help me please?

  Thank you!

  Dave

  Most of the failure of a difference of 20 or more edge edge detection routines.  Since it is a binary image, the difference to the edge is 1.  You can set the contrast of the min on 1 edge detection routines, or multiply your binary image of 255 to get the high contrast edges.  I like the multiplication because it is quick and easy.

  Bruce

• Logging multiple tasks competitor TDMS

  I have an app that will give tasks multiple daqmx running in parallel, very acquireing data at different speeds (10, 100 and 1 and possibly other kHZ), I would like to connect it to a file and am interested in the PDM log task.  Can I share the same file on these tasks) using the daqmx 9.0 and read the PDM functions.  Also, what happens to my taks if there is a file error (disk gets full)?

  Hi Paul,.

  The best way to handle this would be to create one file per task.

  Files can be concatenated simply by concatenating the binary content of the files.  An example that shows combining two files with LabVIEW to e/s binary file is attached.

• How can I know what binary kernel are running on a computer?

  We develop software for international clients. Their PCs have the binary base foreign (not only language packs). We discovered that there is a difference in behavior between the binary of base English (United States) running with German regional language pack German and German-based binaries running pack German locale and language. To facilitate debugging error reports, we want to connect the identity of binaries installed on the computer base. This information is available in the registry?
  Our product works on Windows 7 and Windows XP.

  Sorry, your question is a bit too technical for an old common user like me, I did not see this in my travels and wants to convey.

  "MUI Microsoft Windows Vista and Microsoft Windows 7.

  Up to Windows XP, MUI packs for a product applied to an English version to provide a localized user experience. Windows Vista more advances MUI technology with support for binary files unique, independent of the language, regardless of the language supporting multiple language skins, with resources specific to the language contained in separate binary files. The MUI architecture separates the language resources for the user interface and the binary code of the operating system. This separation allows you to change language completely without changing the binaries of the Windows Vista kernel, or to have multiple languages are installed on the same computer using the binary base even. Languages are applied as language packs containing resources to locate the part where the user interface in Windows Vista.

  MUI packs are available for users of Windows Vista business and as a ultimate extra to users of Windows Vista Ultimate Edition. MUI packs are also available to users of Windows 7 Enterprise and Ultimate edition.

  Starting with Windows Vista, the game of associated MUI APIs are also available to developers for application development. »

  Multilingual user interface

  http://en.Wikipedia.org/wiki/Multilingual_User_Interface

  Binary file

  http://en.Wikipedia.org/wiki/Binary_file

• More SOA from a single binary installation servers

  Hello

  In section 4.3 of the Oracle Enterprise deployment guide - the mentioned below is

  "With Oracle Fusion Middleware 11g you can create multiple servers of a SOA

  single binary installation. This allows the installation of the binary files in one place on

  shared storage and reuse of this facility by servers in different nodes.

  However, for maximum availability, Oracle recommends using redundant binary

  facilities. "

  
  

  My configuration:

  
  

  Resources: External hard drive, 1 Machine, Machine 2
  

  Machine 1 is connected to the external hard drive (on E: /).

  Machine 2 is connected to the Machine 1 using the ethernet and so acccesible cable to the other. (Removed all firewalls to allow LAN communication between two machines).

  2 drive E:\ machine is mounted in the drive of the Machine 1 E (which is actually the path of external hard drive)

  
  

  Following is carried out:

  1. download the binaries (UCR, Oracle Weblogic, SOA Suite, etc.) to a hard drive connected to the Machine 1.

  2. starting at the Machine 1 - installed the binaries on a (Middleware House) location on the hard drive. All facilities including Jrockit are performed on the hard disk via the machine 1.

  3. has created a domain with cluster combining soa_server1 on computer 1 and soa_server2 on the Machine 2.

  4. from the Machine 1 consultation: SOA FIELD hard drive path and ran startWeblogic.cmd.

  5 Weblogic admin server started successfully.

  6. Repeat step 4 above of the Machine 2. (ie., by accessing the SOA AREA of hard drive using the drive mounting machine 2)

  7 Weblogic is NOT started.

  Reason:

  weblogic.management.ManagementException: cannot get a lock on E:\SOACluster-

  Sharing-Drive\Oracle\Middleware\01\user_projects\domains\soa_domain\servers\Admin

  Server\tmp\AdminServer.Lok. Server may already be running.

  My expectation of the statement from the Oracle documentation:

  -Server Admin would start also Machine 2 using that installation on storage shared (IE, HDD), as he did the machine 1.

  Grateful for the help!

  Thank you and best regards,

  Sridhar.

  Well, I think I missed the fundamental point that the server administrator can be started only once in a field and is achieved by locking.

  This explains above question.

  However several instances of managed server must be able to start using same binary.

  My bad. !!

• DG on multiple instances with no CARS

  Hi all

  I am new to Oracle Data Guard and would like to know if it is possible to apply on the top one only binary instances multiple server, even if that server has no RAC installed on it.

  To understand better, I will introduce the current scenario, look:

  A server (Oracle 11 g 2) No. RAC

  -Instance SO (sales order);

  -Instance PO (purchase order);

  -Instance AC (creditors);

  Server B (Oracle 11 g 2) No. RAC

  -Instance SO (sales order) - offline;

  -Instance PO (purchase order) - Offline;

  -Instance AC (creditors) - offline;

  Desired scenario

  A server (Oracle 11 g 2) No. RAC

  -Instance SO (sales order) - primary;

  -Instance PO (purchase order) - primary;

  -Instance AC (creditors) - primary;

  Server B (Oracle 11 g 2) No. RAC

  -Instance SO (sales order) - secondary;

  -Instance PO (purchase order) - secondary;

  -Instance AC (creditors) - secondary;

  I know this may sound stupid to have multiple instances for these databases without CARS, although it looks like my current scenario and I operate the DG of the Oracle.

  Everyone is in a similar situation?

  Sorry for any error English and thanks in advance.

  Hello;

  Yes you can do it. Data Guard is part of the ERA, so if set you your Listener Tnsnames and Oracle Data Guard you're good to go.

  I have a server with three databases using Data Guard and the other not. There is no conflict.

  Also, I have two different versions of Oracle running on this server, 11.2.0.3 and 11.2.0.4. No problem, just configure the listener and start from the House of 11.2.0.4.

  Best regards

  mseberg