WMP-11 / WinXP Media Sharing error - HELP!

Two PC, both with WinXP SP3 Home on them.  A desk, a pro audio (& much faster).  But the sharing of multimedia files from WMP - 11 does NOT work on the faster Pro-Audio PC; It hangs for about 45 seconds when the box is checked, then recovers, but shows NO results to select from.  It will do this several times.  There is also a NEW unit of Panasonic Blu - ray wireless streaming and a pioneer of the NEW network 7.1 surround receiver on the network.  The 'desktop' PC sees the BD & receiver & allows them to be selected in the sharing of multimedia files.  The BD player sees the network and can ONLY play files (jpg & mp3 only, dammit) to the Office PC, but will NOT be connected to or see the Pro-audio PC either.  The Pioneer receiver does NOT show it sees PC EITHER although it should and still iTunes on the PC Pro-Audio sees the receiver AND my sound card (MOTU Traveler Mk3) pro and will play to / thru either (yay iTunes, WMP-11 Boo)!

OK, Yes, the system is a bit complex, but quite impressive with a projected screen of 92 "w X 52" h. also. "  I tried following instructions to automate & and/or start Win connected services / nobody to charge on wmpnetwk.exe (of WMP Network Media Sharing (EXE), but nothing.  I even completely removed & reinstalled all MS .net Framework (1.1, 2.0, 3.0, 3.5, 4.0), but am always errors using MS-implementation to date for new installations.  I'm really starting to think this life Techno is complete rubbish, and I need to ' drop the electronic device and just leave quickly. "  Too bad I'm thousands of $$ in it, and have a lot of hours-life lost to it already.  No matter what other geniuses out there who can tell me how to solve this mess?

Well to set up WMP sharing open WMP, tools, options, Library tab, tap on the

the button "configure sharing" & edit. Also, look in the devices tab, L.click on the

material, press the tab properties & edit...

WMP is a utility called "WMDiag.

Download this from microsoft, it tests WMP

In addition, removing & reinstalling the software such as .NET can / will cause major BONE

problems...

WMDiag creates several large reports, which none did tell ME what it is.  I'm not a programmer.  You don't mention where to send these reports to be decifered for help.  Difficulty of MS it don't find problems or correct them, and in the last two tests, he reported that he "encountered an error & could not continue", sending me to a non-specific solve this site (I've had NO idea where to go from there).  A large PART of my experience of MS's tail-chasing and dead ends.  The team of Bill Gates should start again with a SIMPLE operating system that will work with all existing software (too simplified, but a good idea).

In the end, I spent 4 days of eight hours, trying to solve these problems: not .net Framework package would update via MS up-to-date and sharing the media would HANG about 25 seconds when trying to put on the March (then would produce NO result).  Most of this time was looking, trying some different procedures suggested on the ballots of Ms.  It was excrutiating and a gigantic waste of time.  It could have been resolved in an hour, was easy to find... good info but it really wasn't.  Too many paths, & many people having the same problem.

Finally, with the help of .net cleanup tool and other processes long regsvr32.exe command line, I was able to fix the Windows Update system files, reinstall all .net Framework 1.1 to 4.0 and incredibly stupid boring packages, finally got each update offered by MSUpdate installed.  Curiously and fortunately, which also fixed the problem of sharing of media files.  WMP - 11 now allows sharing and recognizes the wireless Panasonic BD-streaming player AND pioneer in network receiver/amp.

Since MS Answers seems exclusively designed for people with problems MUCH more simple (like how to follow instructions), where should we do when they have REAL problems in the system that NEED to be repaired as soon as POSSIBLE so normal work can continue?  I've always been very frustrated with the interface 'Help & Support' offered in the start - menu, it has generally been quite worthless (Googling is preferable).  This .net of all penalty framework update that many know should have been handled by MS much more quickly & efficiently.

There are many more, but I'll leave it at that since I have fixed my problem. -DMS

Tags: Windows

Similar Questions

  • The xbox 360 Media Player no longer plays music after that I upgraded my CPU. Error message: media sharing service has been terminated

    Original title: the xbox 360 Media Player plays more music after I upgraded my CPU

    I have Vista 64 SP2.  The service runs for 5 seconds and then I get the message that she stopped. He was works well for years (my Xbox 360 sharing), I'm guessing he stopped a few weeks ago after I put in a slightly faster processor. I watched a some tech posted and tried to run the program which seeks the corrupted system files, but the only files that it could not pay had to do with the sidebar Windows. I have removed and put back my media extender, I thought that it worked because I've seen (from my xbox) miniature images, videos and music counting upward, as they have been added and I could see them. But if I take one he freezes for a few seconds and then says the media sharing service took end (or something like that). Then, I go to my PC and see that it stops. I can restart, but it only lasts for 5 to 10 seconds.

    I also say a post about deleting files in C:\Program Data\Microsoft\DRM, but I have all the files in there. Just a server folder empty.

    Hello

    Step 1: Check if the problem persists in the clean boot state.

    From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

    Reference:
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    1. click on start and then click Run.
    2. type msconfig and click OK.

    The System Configuration Utility dialog box appears.

    3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
    4. When prompted, click on restart to restart the computer.

    Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

    Measures to check the application event log:

    a. Click Start.
    (b) in the search box type eventvwr.msc, and then on enter.
    c. now, click Application in the event viewer (local).
    d. now, looking for event log on the right side of the event viewer window.

    http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  • Windows xp media sharing has been disabled because a Windows setting required or a component has changed. For any additional help, click Help on the Web.

    Windows xp. I get this message when I try to share the media in windows media player 11 "sharing multimedia files has been disabled because a Windows setting or a required component has changed. For additional assistance, click Web Help. "I can't turn on windows media sharing and my xbox360 appears as shared, but somehow will turn off media sharing. There is an accelerated procedure to solve the problem that I have received this procedure by phone by microsoft support earlier. They require now $80 to give me the answer.

    Hello

    I suggest you to follow the steps in this link and check if it helps:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-pictures/media-sharing-has-been-turned-off-because-a/6bf3851e-fc7e-E011-9b4b-68b599b31bf5

    It will be useful.

  • Problems with media sharing of computer for Playstation 3, xbox 360, PLEASE HELP!

    I can't streaming media from my computer to my PS3 and Xbox 360 (media sharing) through her router (Network). I always listen to movies, music, photos etc from my computer on my Playstation 3 but recently the windows icon ceased to appear on PS3 when I turn it on. Also my xbox is telling me that it is unable to connect with my computer. The strange thing is, internet works perfectly fine for everything and I checked my network share settings and my computer has detected two game systems and are both allowed to share media over the network. I just can't understand why (& PS3 Xbox 360) game systems ceased to recognize my computer suddenly but the xbox live and PSN (online games) work very well. All the world had a similar problem and help me?

    Hi Sir Alex,

    Thank you for visiting the Microsoft answers community site. The question you posted corresponds to the XBOX would be better suited to the XBOX Discussion groups. Please visit the link below to find a community that will provide the support you want.

    Forums Xbox - http://forums.xbox.com/

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Installed new router WAG160N and my Windows Media Player 11 media sharing now does not work

    I have a netgear wireless router which is dead. However, I've never had any problems with the media file sharing with WMP 11.

    After this router my media sharing file does not work. No devices appear at all.

    I use an Archos 605 PMP

    I have the latest firmware for the router installed

    I have not changed the default settings of the router at all. I tried to disable the firewall, but this did not help.

    Can anyone help? Thank you

    I now sort it and everything works.

    Removal of Windows Player 11 and reinstalled him there.

    Enabled on my Archos 605 WiFi

    then to the library, the sharing of multimedia files and my Archos was there in its entire splendor.

    Now I can now stream the content from my PC to my Archos

  • I can't play movie rental download from BigPond on Windows Media Player, error COOD11B1

    Windows media player comes up automatically but doesn't read movie download - displays a window message "Windows Media Player encountered a problem while playing the file. For any additional help, click Help on the Web. "When I click web help, I get"error COOD11B1. It's "original COOD2906 = error message Windows Media Player does not support the level of protection required for uncompressed digital video." I can't use a different drive.

    Perhaps the following would offer a few ideas:

    (935336) Windows Media Player 11 cannot
    read content protected by DRM on Windows Vista
    http://support.Microsoft.com/kb/935336

    (925705) when you try to use Windows Media
    Player 11 to play a digital rights management
    (DRM) - protected media file media cannot play
    http://support.Microsoft.com/kb/925705

    The security component upgrade
    http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp

    Windows Media Player: Mini WMP FAQ
    http://zachd.com/PSS/PSS.html
    (scroll down a bit to the 3rd entry that said: Vista only)

    Windows Media Player error c00d11b1 resolved
    http://Strom.WordPress.com/2007/04/06/Windows-Media-Player-error-C00D11B1-solved/
    (it's a long discussion on the error 0XC00D11B1)

    Good luck...

  • Windows Media Player error when you try to play a CD: C00D1197

    I played the CD/DVD on my laptop (windows vista) with no problems.  I popped in a DVD and it plays very well.  When I jumped into a music CD, (the one I've played a dozen times) I "Error Message C00D1197."  When I went to my computer and clicked on the CD/DVD player - he said that he had NO CD/DVD read and spit my CD.  When I put my rear DVD - no problems.  Put in a CD, a CD, I get an error message. That's happened? I did something different.  I wonder if the new window updates caused the problem.  Unfortunately, I am not that computer savvy to be messing around on my laptop to see.  Can you help me? PLEASSSSEEEE.  Thank you! : o).

    Hello

    These should help:

    WMP - C00D1197
    http://Windows.Microsoft.com/en-us/Windows7/C00D1197

    Windows Media Player Error Message help
    http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D1197&ContextId=71&OriginalID=80070002

    Also check this KB which could apply to other versions of WMP
    http://support.Microsoft.com/kb/834483

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Network of Windows media sharing service player does not start - Vista and PS3

    I am running Vista 32 bit Home Premium and trying to share my media to DLNA on my PS3 PC using Windows Media Sharing Service. UPnP is enabled. Network discovery is turned on. File sharing is enabled. Media sharing is turned on.

    Whenever I visit Windows Media Player or try to change the setting of sharing media in network and sharing Center, there is the error message "media sharing is currently disabled, either because the sharing service is not running or your firewall settings have changed. To restart sharing, you must first confirm your settings.

    During the deactivation and reactivation of sharing multimedia files, I never see PS3 on the list (not a single unknown device appears). Also I see no Windows Media Player Network Sharing Service on the list of Services - there is no way to toggle the service or do start automatically.

    There are several user accounts on this PC and I made the changes on my admin account.

    Tried a 3rd party software Java "PS3 Media Server" and makes my Vista computer show on PS3 without parameters or modifications to firewall. This suggests that the WIFI, router, network discovery and UPnP work. I prefer to use Windows services if I would only get their work.

    Any help is greatly appreciated.

    Hello

    I suggest you refer to the mentioned link to where a similar question was considered below:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-Media-Player-network-sharing-service-keeps/33542961-5fc6-4daf-866C-8aff5e7b7109

  • Microsoft Media player error message tells me to insert a blank disc

    original title: Microsoft Media player error message

    I tried to burn music from my playlist on the media player on a blank CD and it tells me to insert a blank disc after that I already have, and then says that the program will start once it recognizes the blank test. How can I get it to work.

    Hello

    Thanks for asking!

    1. who is the operating system installed on your system?

    2. did you of recent changes to the system before the show?

    3. do you get an error message when you try to burn the disc?

    Method:

    Follow the indicated link and follow the steps. Check if it helps.

    Open the troubleshooting Windows Media Player settings Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

    Burn a CD or DVD in Windows Media Player: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

    Answer with the results, I would be happy to help you further.

  • I have NO SOUND on my computer and the Windows Media Player error message is C00D11BA.

    To try to solve the problem that I discovered in the Audio tab in sounds and Audio devices properties, there is No default unit in the area of audio playback and No default unit in the peripheral zone of MIDI playback.  In addition, the general tab in the properties of the device Audio USB says "this device is working properly" and that it is enabled as described in the use of the device box. The general tab of the device Audio USB also said the "Driver is enabled and working properly."

    I am able to record dictation through a program of Dragon NaturallySpeaking.

    I'm on Windows XP Pro with Service Pack 3, and before that I lost sound had not recently added that any hardware or software even though I may have uninstalled some rarely used program.

    Hello

    The usual cause of the error C00D11BA is when the sound card drivers are not installed or outdated.

    Windows Media Player cannot play the file because there is a problem with the audio device, such as a map his or her controller.

    Method 1:

    You can follow this link & check if the problem persists.

    Windows Media Player Error Message help

    http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5230&ID=c00d11ba&ContextId=68&OriginalID=80040256

    Method 2:

    Diagnose and solve the problems of Windows audio playback automatically

    http://support.Microsoft.com/mats/AudioPlayback/

    You can also try the manual steps provided in the below mentioned link and check.

    How to troubleshoot sound problems in Windows XP

    http://support.Microsoft.com/kb/307918/en-GB

    Hope this helps and keep us posted.

  • Network external hard drive for media sharing on Xbox 360

    Hello, I just got a new external hard drive. I put a bunch of video files and music to share with my xbox 360. I use windows media player to make the media sharing. I got no problem with it for my regular hard drive in my computer. The first time I plugged my external hard drive to my computer and transferred the files added to the library, it worked fine and the xbox it would be. But after that I restarted my computer, my xbox can't see my external hard drive. I gave her a permanent using MMC drive letter and drive management. But for some reason any xbox will simply not show more. Any ideas? Thank you.

    I had the same problem

    1. Reset the wmp library
    2. Turn on file sharing for each folder on the external hard drive, including the player itself using the same settings.

    3. remove the Xbox 360 exceptions in your firewall

    4 Restore Xbox 360 to your firewall exceptions

  • When I go to media sharing in Windows Media Player 11 my xbox doesn't do not part of the illustrious devices.

    When I go to media sharing in Windows Media Player 11 my xbox doesn't do not part of the illustrious devices. How can I configure sharing with my xbox when it does not appear as a multimedia device. I tried setting up since the instructions given on the xbox, but it does not work. I tried to uninstall and reinstall media player, but it does not work. I can't find a button to add a device anywhere in media player

    Hi, David JohnTreacy,.

    I suggest you see the Microsoft article and check if the device is detected in the sharing of multimedia files.

    Share your multimedia files

    http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/share-media

     

    You can also see the article for more information:

    Listen to music from your computer to Xbox 360

    http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/stream-Xbox

     

    I hope this helps.

  • "Media sharing goes out" - parameters required Windows, or a component has changed in Windows XP

    Original title: 'Media Sharing Turned Off' - settings of Windows required or a component has changed. Unable to find the information that I must correct.

    I have Windows XP Windows Media Player purchased in 2005.

    In WMP, go to tools, options, in the new window look for 'Library' tab, locate 'configure sharing', change...

  • Computer recognizes the detonators but neither WMP, Winamp or Media Monkey Duke he or syncs

    I am at a loss here. I recently reinstalled Windows XP Home and I had previously had no problem with the help of WMP or Winamp or Meida monkey with my rocket, but for some reason any any of my media programs will even recognize the "rocket" is connected, even if it shows as connected in Windows Explorer, and I can drag and drop files to and from it without problem. When I plug the "rocket", I wonder if I want to display files, sync with WMP, sync with Media Monkey, etc. Even if I chose one of the options to sync, I am told by programs that they cannot find a device.

    I've updated the driver on the computer, update to the latest firmware on the "rocket", I don't know what else to do. Any suggestions would be greatly appreciated!

    Other devices work on the same USB port?  A flash drive for example?

    Uninstall the USB ports, restarted (they will reinstall) and try to connect the "rocket" - MSC mode, try first (for the hell of do it a reset on the "rocket" first if you wish).  Tell us what is happening.

    Is it a 'normal' XP installs home or one that has been tinkered with? Sometimes, when they remove XP items it can affect something else.

  • "The media sharing has been disabled because a windows required setting or a component has changed."

    As well as a few other people here, I got the above message trying to connect for sharing (with my Sony Bravia TV) media. This is the first time I tried to use the media sharing.
    I went through the under process, but at step 4. There is no file [security]. I can't use system restore. It could have been this way for years!
    All solutions?
    Thank you
    1. ClickStart.
    2 Typeregedit in the search box and press ENTER.
    3. Locate the subkey HKEY_LOCAL_MACHINE\Software\Microsoft\MediaPlayer\Preferences\HME\ [security ID]. The text of the name of the folder security ID is long, consisting of alphanumeric characters that are broken upwards with dashes.
    4. right click the [security ID] folder, and then clickPermissions.
    5. confirm that your user account is listed as the owner of this subkey under anti-terrorism tab. If your account name is not listed, click and add it to the list of owners. You must be logged on as administrator or member of the administrator group to complete this step.

    Hello

    Thanks for the quick response.

    Yes, if [security ID] folder is not present, then you can go ahead and create a new one. To do this, follow these steps:

    a. navigate to the location:

    HKEY_LOCAL_MACHINE\Software\Microsoft\MediaPlayer\Preferences\HME

    b. right-click on HME, point to new and select the key

    c. This will create a new [security ID] folder

    Now, perform the other steps mentioned in my previous post.

    Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

Maybe you are looking for

  • How can I make the noise of Logic Pro come out in mono?

    I'll use a cube mixture Avantone, alone, connected to the left or right of my interface. I need to hear the mix in mono but I hear only one side. any advice welcome?  do I need a cable special split and use both outputs or y at - it a mono button in

  • wifi AC Pavilion dm1 cart

    Hello, I have a hp pavilion dm1 1010 ev with victory 8.1 and I want to change my wifi bluetooth with new with ca basket because my router's ac dual band, please tell me what type of this model.thx

  • DeskJet 3070 B611

    Printing HP, via WiFi, software works perfectly fine for me. However, one annoying aspect of this is that computers on my home network, using the printing software, all seem to be 'busy' when the printer is turned off. I mean 'busy' as opposed to the

  • I had acrobat adobe for 10 years. This is the first sentence, I had and don't know what to do

    I was able to print pdf files that I created on my pc for the last week.  I was gone and this weekend we lost power twice.  I have improved in windows 10 months ago. and he said to edge of Microsoft is the default pdf.  It has worked before, but now

  • Access to an external table via the display in the UCM configuration manager problem

    Hi allI know that this question is already asked here: to access the external tables in DB / in UCM Applet configuration manager but the conversation has already been archived, and I can't comment there. I'm following approach given by William Phelps