Not able to write files to CD or DVD

Similar Questions

• Not able to read files audio wma

  I myself had this new cool device and everything is working fine beside it is not able to read files audio wma.
  It works without any problem on my Samsung android phone, but on my Slate7 it says format not supported in specifications indicates that it is supported.
  I installed the same player that I use on my Samsung android phone, any suggestions I should do to fix this?

  To my knowledge 4.1 Android doesn't have the necessary codec to play default WMA files. Please see the compatible audio formats listed by Android developers:

  http://developer.Android.com/Guide/Appendix/media-formats.html

  However, for me MXPlayer/VLC works to play WMA files. You can try this one, and there is no harm to try. Two of them are available on PlayStore. You can uninstall them if you don't like them or if they do not meet your needs.

• Not able to write CD or DVD on Tecra A4

  Since the last time I posted my problem of not being able to write CDs or DVDs using TECRA A4 with Mat * 830s DVD burner, I tried all the methods that have been suggested, but without success. I tried to update the firmware to version 2, but I wasn't able to update the firmware. I get the target drive not connected message.

  Hmm, so it's the pathetic situation, I am not able to write even a CD single in 2 years I bought the Toshiba Tecra A4. Whenever I put a CD in it says "D: / incorrect function." Is there a solution to this? I expect a last hope to make it work.

  At the end of my patience, if I can't write a single CD even after 2 years.

  Hello

  > but I wasn't able to update the firmware. I get the target drive not connected message.
  This message appears because you have used a wrong firmware and is not compatible!

  However, I have read you first assignment and all advice offered were ok.
  But have you checked that?

  Try going into control panel-> system-> hardware-> Device Manager and then under dvd/cd devices select the drive and right click and uninstall and then reboot and see if it helps.

  Please check if deleting UpperFilters and LowerFilters in the registry helps:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16319&MessageID=59664

• Satellite A200: Not able to write DVD using Win XP

  Hello

  I have an A200 - 1 MB (PSAEO) that came with Vista home premium installed. After this downgrade to XP Professional, I am not able to write something on the DVD.

  Help, please. Model # for the DVD drive is TS-L632D.

  Help, please.

  Thank you

  James

  Hello

  I assume that you have installed all the drivers for the Toshiba driver page. You also update the BIOS to the XP version?
  You should do this if you have changed the operating system and if you use XP instead of Vista.

  May I ask how you try to burn data to a DVD disc?
  Are you using a 3rd party burning software?

  I use Nero and I m very pleased it burns different types of CDs and DVDs.

  Feedback would be appreciated.

• WMP player not able to read files on fuse + after Real Network update

  In the evening, I received a noticed that there was actual update available. I installed it.  My fuse + was connected at the time. When it was done the options showed to read by the drive and the external card.  I tried to display to use it, but it seems to not work.  Windows Media Player also seems to not work.  I disconnected my player and plugged in.  Still not able to view files with WMP.  But, then was able to display using Real.  I don't like the actual display.  Was able to view files with explores.  Deleted in real.  Now able to see the player of fuse.  Only able to see 3 pictures on the external card.  I have 7 GB of data on a 8 GB card.

  Could be something else, but now seem to point to the actual update.

  I have a second player who still works with WMP.  I could see the files on the card with WMP when installed in my second player.  When I put it in my original drive is back to normal.

  Back to normal with no real software.  I liked Real SP.

  the real update may have changed the accociations with the "rocket" since it is try plugged in. uninstall the "rocket" in the Device Manager and then scaning for hardware changes. This should refreash installation.

• Not able to synchronize files and libraries CC

  I am not able to synchronize files or libraries - it won't let me tic on the box. All solutions?

  

  I delete the database files CoreSync and it seems to have solved my problem.

  Leave the creative cloud desktop application.

  Reach:

  Mac:

  /Users//Library/Application Support/Adobe/CoreSyncSync

  Windows:

  C:\Users\\AppData\Roaming\CoreSync

  Remove all *.db possessing (or a Variant such as * .db - wal)

  Restart the desktop creative cloud application.

• Not able to download files with the iPhone from the outside

  Hello

  I'm not able to download files from my iPhone when the iPhone connects to the workspace to external. We have deployed nginx as reverse proxy in our DMZ which transmits requests internally will bridge.

  The download start (number of bytes transferred to the top), then the transfer ends with "error".

  I could not find errors in the log files, but maybe I didn't look in the right places

  If the iPhone is connected to the internal workspace, the problem does not occur

  Any ideas on this subject?

  Thank you

  What is the waiting period that you define in the nginx Server in the DMZ? All other additional configurations?

• Satellite Pro M70-113: not possible to write on CD - R and DVD-R

  Hello

  I have a Toshiba satellite pro m70-113 laptop.
  Playback problems:
  I'm unable to read cd - r. It's really strange that a few days earlier these CD - R have been reading very well on my drive.
  and when I click on the cd drive in my computer, an error dialog box shows and says f: is not accessible, incorrect function. Here's a screenshot of the error... :
  http://img64.imageshack.us/img64/9574/1bp3.jpg

  And when I try to read my DVD-R, a few times they read very well but sometimes it does not read and the drive LED is lit when it does not read the dvd - r.
  When it reads the DVD-R, the following error message comes: screenshot here: http://img172.imageshack.us/img172/9674/2bc0.jpg

  Write problems:
  After getting reading problems, I tried to test my drive writable.
  And I found that I'm unable to write on cd - r. I used alcohol and Nero once but without success.

  Although the same content when it is burned to cd - rw, it is a success.
  I am able to burn successfully on a support DVD + RW 4 x with data amounting to close to 4.34 GB for DVD5...
  When I insert a DVD - R Virgin car doesn t detects it as a blank media and the keps LED on lighting constantly and if nero State doesn't detect my DVD even! I'm not able to write on my DVD-R media...

  In short: write to RWs is possible for both cd - r and dvd + RW not possible of writing on CD - R and DVD-R.

  Please help me.
  It is only 7 months since I bought this laptop and believe that there may be no other person on this planet who looks after the training better than me!
  Really, I have not much used this drive and never scratched/gradient/local support, only the Supermedium media inserted.

  Thank you

  Hello

  Well, based on your description it sounds like the drive cannot calibrate the lens and, therefore, it of not possible to read or write to these media.
  Usual it of not possible to fix this and the replacement drive is necessary.

  You can also consult the user manual. You will find a list with all supported and compatible media.

  I also found this topic in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13170&MessageID=48243

• Not able to copy files on USB drives.

  Original title: hp v165w USB Device

  I bought 2 separate USB flash drives to copy files to each of them seemed installs successfully but then when I want to copy or drag a file to it, my computer tells me no device doesn't exist and please insert a disc into drive F. But USB installed in drive E, Ive tried to do a shortcut for on mmy desktop USB and drag files into it, but it gives a red circle with a line through it, indicating that it is impossible. Please help me understand what to do!

  Hi mrsstacysmith,

  Thanks for posting in the Microsoft Community Forum. As you are not able to transfer data in USB drives, try these methods and check:

  Method 1:

  To verify that USB is causing the problem, try connecting a single USB key and then try to transfer the files from the computer and check if it works.

  Once you get the confirmation, try to connect to the second USB and try to transfer the files from the computer and check.

  If the second USB shows the same error as mentioned try connecting to another USB port and check.

  Method 2:

  Check if USB drives are detected in the Device Manager.

  a. click Start, Type Device Manager in the search box start and click on enter.

  b. expand Bus USB controllers and check if the device is detected.

  c. double-click the device and check if the device status says device is working properly.

  Also check if the USB drive is detected in disk management.

  a. click on Start, Type diskmgmt.msc in the start search box and click on enter.

  b. check if the USB is detected as a drive.

  Visit this link for more information:

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows7/change-add-or-remove-a-drive-letter

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• Not able to load files that have been uploaded to the site

  I was totally stumped by a problem, I'll have and think that the answer lies perhaps with Dreamweaver.
  
  Recently, I lost files on a hard drive crash which were important pages on my site. I want to update so I could upload them to the site for the work of thought. After download them on my local site, Dreamweaver refuses to open, giving me several error messages prior to the closing.
  
  The message I receive when you attempt to change my downloaded file:
  
  (1) corrupt JPG data: premature end of the data segment.
  
  When I close this error message, I get:
  
  The JPG file structure invalid 2): two markers;
  
  After the closure of this one, I get:
  
  (3) the instruction at "0x77f5b2ab" referenced memory at "0 x 00000028. The memory could not be "read". Click on OK to terminate the program.
  
  Front Page open the same files without problem, but I'd prefer to work with Dreamweaver and not FP.
  The files are .asp, incidentally.
  
  The indices or help will be appreciated.

  > When I loaded the page in DW8, it crashed.

  > .asp files, are also

  a browser in offline mode will not get the coding ASP.

  Connect to the server via FTP.

  If dw indicates that JPEG files are corrupt then crashes - then suggest
  Open them (the images) and save it back into an image editor.

• "Not able to write to the configuration file" when config editor in the admin tab

  Hi guys,.
  
  I have install OBIEE 10.3.3.4 on a GNU / linux RH (with OS user obiee) and Oracle Application Server 10.1.3.1 on the same box (with OS user oraias).
  
  When I want to change some settings in the admin tab of BI publisher (administrator/administrator under the name of login/pass) and click "apply."
  I get the error "could not write to the configuration file. Once I changed the configuration to 777 properties, the error is still there. And I also try to change the SECURITY MODEL to the MEO, but still no use.
  
  I did a test, for example, when I change something in the admin - JDBC - Oracle BIEE and apply then I got the error. If I update xmlp/DataSource/datasources.xml manually, the change can be seen after that I opened the admin of page - JDBC - Oracle BIEE. That means I have find the right file and the file access properties is ok.
  
  Other parameters such as the Scheduler Configuration, I had the same error when apply. But the "Test connection" and "Installation diagram" function.
  
  Can someone give me some advice on this? Thank you
  
  Scott
  
  Published by: Typhoon on March 20, 2009 12:59 AM

  In what way is your xmlp? You are absolutely sure that the user of the OAS (oraias) can write to this file? If you have used another user for OBIEE then your will need to change the owner of the file or put them in the same group, and change the file permissions.

• Not able to open files from the internet.

  I tried to open the files in the past (trying to find the specific file example, but not ablt to) and I get a new window and it appears asking me to select a language. I chose "default windows" and English of the West, but always 'open' the file in a number format. I don't know what is happening or how to fix it. These were not large files, and it doesn't all the time.

  Hello

  Looks like you are trying to open binary files - those that are coded and require special
  programs to decode them. Some can even be designed to open, like executibles (.exe
  and .com) or. DLL files among many others.

  If you need to be able to open a specific file type control these sites and if necessary ask questions on
  them, in a message.

  http://www.FileInfo.com/

  http://file-extension.NET/seeker/

  Online database and a free utility to help (FileTypeMan).
  http://extension.NirSoft.NET/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Not able to write DVD after reformatting on Equium A60

  Help, please
  I had to reformat my drive hard once the system has been corrupted, now, the drive is not recognized as dvd player and do not write DVD.
  What should I do
  Thank you

  Hello

  I found a DVD-Ram driver Toshiba driver Web site.
  Please download and install this driver.
  Hope that this procedure will solve your drive problem.

• not able to write the data through data acquisition

  Hello

  In fact, I need to send a code word (text file) from the program matlab through my data acquisition (OR-USB-6215). my program (transmitter.vi [case structure: page2]) attached below has a problem to do the task. whenever I run the program it gives me an error like

  Error-200479 occurred at DAQmx start Task.vi:2

  Possible reasons:

  Measurements: Specified Operation cannot be performed during execution of the task.

  Task name: _unnamedTask<84>

  At the moment I don't see output in my oscilloscope. But, if I highlight my performance I observe my samples on the oscilloscope with the following error message

  200288 error has occurred in the DAQmx write (analog 1-d 1Chan NSamp DBL) .vi:3
  Possible reasons:

  Measurements: Attempted to write a sample beyond the final sample generated. The build is stopped, so the sample specified by the combination of the position and the offset is never available.

  Hi Raja,

  What I did is I moved the 'write DAQmx' outside the while loop. That made the VI in this case is read the file and passing it to a table, and then this table is formatted a waveform to be written to the data acquisition device.

  With respect to the way in which the data is read, I don't change anything, it was based on your original code. A good way to know if you write the correct data is to check the chart view in VI.

  So the question is, is the graphic display showing the good waveform?

  Best regards

  Faris

• CD/dvd reads but not able to write. says 'hardware error 9216.

  When I got this laptop it reads and writes audio and dvd movies fine but after about two years it stop working. whenever I try to write it not finish writing and guest says 'hardware error 9216. has concluded that it might be because I got more than burning software then maybe they could have a conflict with each other, but I could find something on how to resolve the issue so that why I'll try here.

  It could be the problem with the software if have several software to burn and write as you say. You can uninstall one by one and after uninstalling restart your PC to see what problem a single cause. To better test, it is better to restart after every uninstallation. If you see system information, you can find the details in the conflict, but it is a little technical.

  Restore your system before this problem to occur.

  You can try to run this command at the command prompt:

  sfc/scannow

  Make sure that your system is updated and the latest service pack installed.

  Another thing is that it might be due to malicious software, and in this case, you could run full system scan with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx