WMP says "plug and burner and restart player '. What should do?
Never had a problem before. Have always been able to burn CDs. Now, I get this message: "connect a burner and restart the player.
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.
Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.
===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.
Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.
Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.
Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.
Forums - a lot of expert real help
http://Club.myce.com/
CD/DVD units
http://www.myce.com/storage/
Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.
DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Tags: Windows
Similar Questions
-
Not load - when my computer is plugged in it says "plugged and no charging current.
When my computer is plugged in it says "plugged and no charging current. How can I fix this so my battery is charging, I have an Acr Aspire 5610Z. With windows Vista Hoem Premium
I meant I was just having the same problem not load and had tried all suggested. But only five minutes ago, I went to my laptop factory site (gateway) to seek help, well I found it! Under support of battery problems, I followed the troubleshooting list and #2 a;
" Remove or replace any surge protectors. " Remove the surge protectors between the system and outlet. Unplug them only in order to solve this problem. Connect the system directly to a wall socket that is well known. A lamp or a hair dryer can be plugged into the wall outlet to check that it works.
Over time, the surge protectors can develop bad connections and present a potential of incompatible power between the wall outlet and the system. Some surge protectors have fuses that have to be reset in the case of an increase in energy consumption. This might indicate there are too many devices and the surge protector with power to the surge protector limit exceeded. If the surge protector is equipped with a fuse and reset it solves the problem, remove some of the connected devices and the surge protector. Make sure that the wall outlet is not connected to a wall switch which can be turned off inadvertently.
Important: Once the problem has been resolved; If it turns out to be the cause of the problem or if something turns out to be the problem, replace the surge protector, plug it back. Always use a quality in State surge protector new or very good between the system and the wall outlet. No not the Garland or connect a surge protector to another. "AND IT WORKED! So I thought I'd share because it was a response that has ever suggested in all the forums, I have visited. It can be useful :)
-
Hey I have a pc and Internet, but when I try to conect with my lightroom iphone say that my pc has no internet what should I do?
Hi jonathan,.
How do you mean that you connect it with your iPhone? This isn't something you need to do for mobile LR.
In LR Mobile, when you import photos into the application, they are synchronized via Adobe Creative Cloud. When you open LR CC on your desktop and connect using the same Adobe ID on the phone, the photos will be automatically syncs down to the office. There is no need to connect the phone to the PC.
Mike
-
I have photoshop and he says it's a free trial version what should I do?
I have photoshop and he says it's a free trial version what should I do?
Hi annas85504540
Please follow the steps mentioned in the https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html
Let us know if this helps!
Kind regards
Aurélie hamadi
-
I bought photoshop elements 13 and downloaded and tried to install it. I got an error message that says it is a pirated version and install. What should I do?
Start with the one that you bought - see what they have to say for her.
While the use of the words "pirated version" is conclusive enough, if you can view the full error message it might help explain the problem also.
-
I recently bought Lightroom and installed on one of my computers. I tried to install the program on another computer, I, using the same serial number that I already bought and I am not accepted as it says that the SN is invalid. What should I do?
It is possible that you downloaded the demo of creative cloud of Lightroom. The perpetual license key will not work. Uninstall the version on the second computer, it doesn't bother your catalog, preferences and personal files.
Download the appropriate version from the link below and install them, your license key is accepted and everything will be fine.
-
I plug in a device after I installed the drivers from the USB says windows can't recognized the device what should I do to solve it.
Hello
I suggest to go to the link below and run the fix tool provided or follow the manual procedure provided to solve the problem.
A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive
http://support.Microsoft.com/kb/925196
You can also check the below link for more information about advanced troubleshooting tips for General USB in Windows XP problems.
-
Hi, I have a Canon iX6850 printer, but I can't print in color from photoshop. The prints are black and white? What should I do?
Hi Vera,
Thanks for the update.
Make sure that the image is set to RGB in Photoshop.
In addition, we suggest you follow the steps below:
1. exit and then restart Photoshop
2. go in the file menu > hover your mouse over Print > press and hold the space key
3 try printing
This would reset the printing preferences for Photoshop.
Kind regards
Claes
-
Hello
I have major problems. When I go on my computer managman to go to the request, it shows approximately 1800 warning and error. What should I do?
Hi James,
The description of the 1800 error code is:
- ERROR_INVALID_PRIORITY
- 1800 (0 x 708)
-
The specified priority is invalid.
1. why you accessed the computer management?
2. were there any changes (hardware or software) to the computer before the show?
Please post a screenshot of the computer management window when you receive the error code 1800.
How i: post a screen shot on this forum? -Microsoft Answers
Answer please if you have any questions.
-
Forgotten user name and password. What should I do?
I forgot my user name and the password, what should I do?
Inge Strom
I forgot my user name and the password, what should I do?
Inge Strom
If you reference in the name of user and password of your e-mail accpount and your account is a POP3 account, simply call your ISP or your e-mail server. They have your balance sheet.
If you are referring to log on to the computer, we are not allowed to help users to bypass the password protection, regardless of what are "reasons".
Here's the Microsoft Policy about this:
http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem. -
I want to activate Acrobat Pro 9 serial key and get message that are 2 active activations. We're old computer with problematic material and other is the same pc that I didn't turn off the license and reformatted. What should do?
I didn't know, I had to disable before turning back, but now I don't have this option. Is there a way to disable these two licenses and activate again the good?
Hi vasilisp36877173 ,
Please see these items:- Learn how to enable or disable Adobe applications
Solve the problems of activation and deactivation of Adobe and error messages
Let me know how it goes.
Kind regards
Christian
-
you want to create the PDF file that can be used by many people running on MAC and PC. What should Adobe I use?
Hello Anne,.
in all these cases, I use "Acrobat XI". You can first use a trial version, here is the link: Download Adobe Acrobat free trial version | Acrobat Professional XI
Hans-Günter
-
Install Acrobat DC says I have a newer version installed - what should I do?
As topic, Acrobat DC installer says I have a newer version installed - what should I do?
I had installed DC previously, but it doesn't work anymore, so I uninstalled, then I tried to reinstall - think that some files must have left me, but I don't know where to look.
Thanks for any help,
Craig
Please use Download Adobe Reader and Acrobat tool - Adobe Labs cleanup tool to completely remove DC Acrobat (if you are using Windows), and then restart your system.
Then try to reinstall the application from the following links:
Adobe Acrobat Reader DC: Adobe - Adobe Acrobat Reader DC Distribution
Adobe Acrobat DC: download Standard or Pro versions of Acrobat DC, XI or X
Let us know how it goes.
Kind regards
Meenakshi
-
I have reinstall my Adobe Design Premium CS5, but when I enter my license number, he says it's an invalid number. What should I do?
Hello
You have allowed CS5.5 to register for your account. you need to download a good set up for Cs5.5
Download Adobe Creative Suite 5.5 products
Please refer to the help document can help you.
Error: "this serial number is not for a product calling it" | Adobe Creative Suite
-
Help, please! When I use my computer, it must be connected as the battery stays on 0% fees. When I plug it, I pass my mouse over the icon in the taskbar that shows me the battery power, it is said "plugged and no charging current" and displays a battery that has 0% fees. When I unplug the computer, it turns off INSTANTLY, and I need to plug in again to use it. Before that, I lived lack of extreme battery life, and it would last from 5 minutes to 30 seconds. I ordered a new battery, but it does not come for a few days, and I want to be able to bring my laptop with me.
I have a same problem too. My battery shows 18% charged all the time. Even when it is plugged.
And as soon as I take the plug it shuts. My battery info shows like that.Battery information: batteryID of the battery 41167LENOVO PABAS0241231 Manufacturer LENOVO Serial number 41167 Chemistry Li - I In the long term 1 Seal 0 Rated capacity 48240 Full last Charge 49600 What should I do? My laptop is only 2 months old. I have not even used for more than 6 hours total.
Hi mukeshbhakta
There is something wrong with the circuit load or battery.
The full last Charge can be superior to the nominal capacity?
I would recommend that you check with Lenovo to find how to troubleshoot the charging circuit.
Lenovo support - drivers & Software (United States):
http://support.Lenovo.com/en_US/downloads/default.page?selector=expandYou can also use the support Lenovo user forums to interact with other users who use the same model of Tablet.
Lenovo - Lenovo community: http://forums.lenovo.com/
Concerning
Maybe you are looking for
-
Why the SD-R6112 drive will not read the table of contents through DVD Decrypter?
Why the hell used my reading of DVD-ROM/R/RW Toshiba SD-R6112 the TOC through DVD Decrypter?She normally does! I use nero, Decrypter, DVD Shrink, and even Windows medai Player 9 series. It was working fine 2 days ago now pfft, will not work. Everythi
-
Why my WIFI on my computer turns off by itself and won't turn it on?
I have a Dell Inspiron e1505 with windows XP home. My internet works fine. I have the latest drivers for my computer. But my WI - FI goes off without reason and won't turn on, so I have to restart the computer. When this produces the sound on my comp
-
How to minimize, maximize and close buttons more far out?
How to minimize, maximize and close buttons more far out?
-
Problems with WMC Internet TV (Beta) in Vista 32-bit last month.
Okay, so for those of you who have read my previous posts on Windows Media Center related problems involving the Internet TV beta edition, you know, I've had difficulties to find a fix for a specific problem where Internet TV will not download and gi
-
Hello I just bought my new laptop (Quad HP Envy 17 t-j100 edition) and I have a few questions for my audio port. I have only 1 taken from headphone-out/microphone-in the drop-down list. Is it possible to record stereo signals using this port? When I