Not load - when my computer is plugged in it says "plugged and no charging current.

When my computer is plugged in it says "plugged and no charging current. How can I fix this so my battery is charging, I have an Acr Aspire 5610Z. With windows Vista Hoem Premium

I meant I was just having the same problem not load and had tried all suggested. But only five minutes ago, I went to my laptop factory site (gateway) to seek help, well I found it! Under support of battery problems, I followed the troubleshooting list and #2 a;

" Remove or replace any surge protectors. " Remove the surge protectors between the system and outlet. Unplug them only in order to solve this problem. Connect the system directly to a wall socket that is well known. A lamp or a hair dryer can be plugged into the wall outlet to check that it works.
Over time, the surge protectors can develop bad connections and present a potential of incompatible power between the wall outlet and the system. Some surge protectors have fuses that have to be reset in the case of an increase in energy consumption. This might indicate there are too many devices and the surge protector with power to the surge protector limit exceeded. If the surge protector is equipped with a fuse and reset it solves the problem, remove some of the connected devices and the surge protector. Make sure that the wall outlet is not connected to a wall switch which can be turned off inadvertently.
Important: Once the problem has been resolved; If it turns out to be the cause of the problem or if something turns out to be the problem, replace the surge protector, plug it back. Always use a quality in State surge protector new or very good between the system and the wall outlet. No not the Garland or connect a surge protector to another. "

AND IT WORKED! So I thought I'd share because it was a response that has ever suggested in all the forums, I have visited. It can be useful :)

Tags: Windows

Similar Questions

  • Laptop battery does not load when the computer is turned on.

    Hello

    Yesterday, I was using my laptop when I noticed that the battery was going down. It seemed to be a card problem, because there are two lights on the laptop.

    A: light connection light signals that the power cord is connected.

    B: light Charge light signals that the battery is charging.

    The two lights were turned off.

    In my school, we have the same adapters for small Netbook computers. I borrowed one of these Chargers with the consent of the School technicians.

    When I plugged in the charger again, my cell phone was off. Light A and B are on. I tried to turn on my computer, but it would not. I unplugged the adapter and the battery and hold the power button for a minute. I plugged my charger, but it won't always turn. I plugged my battery as well and noticed lights B. The battery is being charged. I unplugged the adapter and tried to turn on my laptop. It worked. Fires had been arrested, the battery was in, and it worked.

    However, when I plug in the adapter, A light lights and light B does not work. When it connects, the battery symbol changes for charging symbol, but only for a few seconds. He then returned on the normal battery symbol. When it shows the symbol plugged, it is said "plugged in, not charging."

    When I stopped or do it in mode 'sleep' - the operating system is not running, the light and B turn on the adapter with the battery connected. When it lights up, the battery has increased significantly in charge.

    Can someone help me please? I can't run for more than 2 hours at a time - and it's after 1 hour charge.

    Looks like the load Board is bad inside the PC.

  • Envy 15-j051: my HP Envy 15-j051 does not load when the computer is on, but will charge when turned off

    whenever I'm on and trendy get plugges but do not load, but when I stopped and keep power connected it charges the battery. I checkd the battery and it says primary school-OK (1) tell systems check all past

    @lagrit1023 ,

    Hello and thanks for the display on the HP support forums.  What you have going on here, it's a problem with the regulation of power on the motherboard or a problem with not enough amps from the power supply.

    Can you try feeding on a laptop or have a place that you can take to check?

    The only other way to check if you have already made the checks of the battery and so on is getting the system sent repair.  To do this, you will need to contact the HP support by phone.

    Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

    http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

    Please let me know how things are going.

    Thanks again for posting and have a great day.

  • ' Plugged in and no charging current.

    I have a Pavilion dv6 nine notebook and the battery just doesn't work. When it is plugged into the power supply, it works perfectly but shows "plugged and no charging current. I ran the HP battery test and he simply says 'unknown '. Looks like a clear case of a defective battery for me, but I just wanted to see if anyone else has other ideas. Thank you

    Hello

    Try this:

    Disconnect the AC

    Shutdown

    Remove the battery

    Connect AC

    Startup

    Open the Device Manager

    Click plus the sign (+) next to the category Batteries, all ads in 'Microsoft ACPI Control method battery compatible', then right-click and select uninstall in the dialog "Confirm device uninstall", click OK. (it's ok if you only have 1 of these lists).

    Click the plus (+) sign next to system devices.

    The "ACPI fixed features button ' right-click and choose uninstall. In the "Confirm device uninstall" dialog, click OK.

    Shutdown

    Disconnect the AC

    Insert the battery

    Connect AC

    Startup

  • acerEXTEND does not load on the computer (Windows 7)

    acerEXTEND does not load on the computer (Windows 7/10). Error message says I need to be administrator. Computer said that I am logged on as administrator.

    Good to hear it!

  • On computer portable plug-and-play monitor is primary and is a secondary monitor to the laptop and I'm not able to spend their

    I had been using my laptop with a plug-and-play monitor. I disconnected and used my laptop on its own. I did something (not sure what) with the with default advanced settings and plug-and-play monitor. When I reconnected it the plug-and-play monitor was the main and the laptop was secondary. When I disconnect the plug-and-play monitor, I can see is my office. I tried to restart and log in the menu will only appear on the plug-and-play monitor.

    Hi DonDC,

    What is the brand and model of the laptop?

    What happens when scroll you the screens using the function key on your laptop?

  • (Redirected) Dell audio drivers will not load when the system is turned on for the first time after his stop.

    Dell audio drivers will not load when the system is turned on for the first time after adoption of Windows 10. I have to reboot every time. So what I'm doing puts the system into sleep. in this way, I don't need to stop and restart the system. It is Dell Inspiron N5559. Audio drivers are installed and up-to-date. Equipment works correctly.

    Hi akilesh.sharma18,

    Please repost this in the Audio forum from the laptop to help.

    http://en.community.Dell.com/support-forums/laptop/f/3517

  • Google (search pages) will not load on my computer.

    Google (search pages) will not load on my computer.  It worked fine, then all of a sudden - not google.  Google seems to be the only site that does not work (in fact google maps comes up) - everything is fine.  Any ideas as to why this is happening or what I can do about it?

    In fact the advice I received in another thread solved my problem.  Thanks anyway.

  • I bought lightroom 6 and it will not load on my computer?

    I just purchased lightroom 6 and it will not load on my computer it's not 64-bit. I used a version track Lightroom 5.7 and it worked very well, then, what is the problem.

    Download, installation, setting up

    Lightroom 5 (Windows) ran on 32-bit operating systems.

    Lightroom 6 (Windows) requires 64-bit Windows.

    What version of Windows are you using?

    https://support.Microsoft.com/en-AU/KB/827218

  • I have Photoshop CC but Lightroom CC does not load on my computer. What could be wrong?

    I have Photoshop CC but Lightroom CC does not load on my computer. What could be wrong?

    Hi leslieschenck

    The bridge is available as a different Application in the creative Application of cloud

    Make sure that the latest version is expanded and you can see applications

      

    Or follow the procedure How to install Adobe Bridge CC "Caveat Lector .

    Concerning

    Assani

  • My iPhone does not load unless the cable is placed just to the right and the phone is still completely. Advice?

    Hey everybody. Since a few days, I have had a hard time charging my iPhone. It all started when my phone onto my computer. He suddenly began to vibrate, and the charging symbol flickered on and outside. Since then, I had to mess with the power cord plugged into the phone until it starts to load. Once it starts to load and remains always completely, is perfectly fresh. The problem is that I do a lot of work and outdoor recreation such as hiking, and I need to charge my phone on the road sometimes. But once I'm start moving the phone around, it does not load until I have reposition it. My phone had not been dropped, smashed, splashed with water, or something serious in several days or even several weeks before acting. This could be a software problem? I cleaned the inside of the charge socket and the charge lead works fine with other devices. I also restored the phone to factory settings and then restore a backup. Any advice would be appreciated.

    Clean the hole of the support and review it with a bright light. You must get it squeaky clean and without bending the rather delicate pins. And make sure that the bent pins.

  • My canon EOS 20 d is not detected by my computer lenovo, OS Windows 7, 64-bit and my computer Gateway Laptop windows vista 32 bit operating system

    My canon EOS 20 d is not detected by my computer lenovo, OS Windows 7, 64-bit and Gateway laptop with Windows Vista 32 bit operating system.  This means plug-and-play is not available or does not so I have to use for my compact flash card reader to transfer pictures.  I've already updated the firmware by downloading the upgrade of the Canon website.  I tried to turned touble this problem following what is suggested in the Canon Website, and still the problem is not corrected.  Thank you.

    Hello

    Follow the steps mentioned below and check if the problem persists.

    Method 1: Open the hardware and devices Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2: You can also try to connect the camera to a different port and check if it helps.

    Method 3:  You can also try changing the normal mode to print/ptp in camera mode where you can print directly from camera by connecting printer directly using the usb cable.
     
    Hope this information helps.

  • Hello! The Creative cloud program does not. When you open the file in Photoshop says that there are not many fonts, use Typekit. Typekit itself turned off. All programs downloaded and saved, but Photoshop doesn't see Typekit. What should do? Also says I h

    Hello!

    The Creative cloud program does not. When you open the file in Photoshop says that there are not many fonts, use Typekit. Typekit itself turned off. All programs downloaded and saved, but Photoshop doesn't see Typekit. What should do?

    Also says that I have no access to this service. For access, please contact your COMPUTER administrator or connect using the ID

    Hello

    Greetings!

    Is Typekit on?

    Visit this link: Add to your desktop of Typekit fonts

    Concerning

    Jitendra

  • Why my Windows Mail doesn't always said "not responding" and then when he made a screen comes up saying: 'Cancel' and it stops it?

    Why my windows mail doesn't always said "not responding" and then when he made a screen comes up saying: 'Cancel' and it stops it?

    original title: Windows mail does not

    Try to compact and repair the database (www.oehelp.com/WMUtil/).  That should fix it.

    Steve

  • Error loading c:windows\system32\sshnas.dll wants to say what and how do I clear this pop up?

    Error loading c:windows\system32\sshnas.dll wants to say what and how do I clear this pop up?

    Hello

    Step 1: sshnas.dll is a component of spyware or malware.  Online virus and malware scanner and check.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Step 2: You can also see the question in the clean boot state.

Maybe you are looking for